# 11digit

description:
CHEVROLET NO. 1108366 (250 AND 292 ENG.)


description:
KOHLER MODEL NO. K-181, 12 VOLT, 8 HP ENGINE


description:
PRESTOLITE NO. 462577, 12 VOLT, 4 CYL., FOR AIR COOLED ENGINE


description:
STARTER COMPONENTS AND PARTS - BRAND LISTED OR EQUAL


description:
ARMATURE, CHRYSLER NO. 3837325 (DOUBLE GEAR)


description:
BUSHING, DRIVE END HOUSING OF STARTERS USED IN H.D. TRUCKS AND INDUSTRIAL EQUIP., DELCO-REMY NO. 1894635 OR EQUAL


description:
CLUTCH, STARTER DRIVE - NIEHOFF NO. SD-11


description:
COLLAR, STARTER DRIVE - FORD NO. C5NF-11166A


description:
POST, SOLENOID, BRASS, 5-1/16 IN. -NC X 1-1/2 IN. L, 5/16 IN. DIA., 45 DEG. FLAT HEAD, STANDARD NO. 802491


description:
8 PIN MALE PLUG ON ONE END, 8 TERM. FEMALE PLUG ON THE OTHER END, PLASTIC T-TYPE, DRAWTITE NO. 18316 OR EQUAL


description:
4 IN. L X 2-1/8 IN. W, 12 VOLT, 4-WIRE PIGTAIL, W/LOCKING CONNECTOR, CHEVROLET NO. 3081685 OR EQUAL


description:
4 IN. L X 2-1/8 IN. W, 12 VOLT, 8-WIRE PIGTAIL, W/LOCKING CONNECTOR, STERLING TECH. NO. G2047233 OR EQUAL


description:
COVER, 5-1/2 IN. X 3-1/2 IN., PLASTIC, CHEVROLET NO. 15590590 OR EQUAL


description:
LOW SPEED: 3-22 MPH, HIGHWAY SPEED: 30-60 MPH, F/HERBICIDE TRUCKS USING LOW SPEEDS, KING CONTROLS NO. KC2500LS OR EQUAL


description:
DASH ELECTRICAL ACCESS. AND PARTS, VEHICLE


description:
SOCKET, DASH LIGHT, PLASTIC, BLACK, CLIP-IN, FOR NO. 158 MINI-LAMP


description:
HARNESSES, ELECTRICAL WIRING (BRAND LISTED OR EQUAL)


description:
LIGHTER AND PARTS, CIGARETTE (AUTO.) - BRAND LISTED OR EQUAL


description:
PLUG, CIG. LIGHTER, FEMALE PART, 12 VOLT, DASH MT.


description:
PLUG, CIG. LIGHTER, POWER ADAPTER, MALE PART


description:
PIGTAIL, DOUBLE CONTACT, SPRING AND RUBBER WASHER, 7-1/2 IN. L, HEAVY GAUGE, THERMOPLASTIC WIRE W/BRASS CONTACTS, TERMINALS, AND FLAGS. GROTE NO. 68130 OR EQUAL


description:
CLAMP, CABLE TO FRAME, NAPA NO. 770-1154


description:
CLAMP, CABLE TO FRAME, NAPA NO. 770-1156


description:
HOLDER, FUSE, 2 IN. L X 3/4 IN. O.D., SCREW-ON CAP, 2 PRONG PLUG-IN, PLASTIC


description:
RECEPTACLES, POWER, VEHICLE (TO CONNECT POWER SUPPLY ON TRUCKS TO ELECTRIC WINCH)


description:
1-1/8 IN. O.D. X 7/16 IN. I.D. X 1-3/4 IN. L, W/LOCKNUT, BRASS CORE AND SINGLE TERMINAL


description:
AMP GAUGE, 12 VOLT OR 24 VOLT, 2 TERM., AUTO OR HEAVY EQUIP.


description:
FUEL GAUGE, 12 VOLT OR 24 VOLT, 2 TERM., AUTO AND HEAVY EQUIP.


description:
OIL GAUGE, 12 VOLT OR 24 VOLT, 2 TERM., AUTO AND HEAVY EQUIP.


description:
TEMPERATURE GAUGE, 12 VOLT OR 24 VOLT, 2 TERM., AUTO OR HEAVY EQUIP.


description:
VOLT GAUGE, 12 VOLT OR 24 VOLT, 2 TERM., AUTO OR HEAVY EQUIP.


description:
2 WIRE FOR 12 VOLT - STANDARD NO. S-59 OR EQUAL


description:
DOUBLE CONTACT, BLOWER/COMPRESSOR, W/6 IN. LEAD, STANDARD NO. S85 OR EQUAL


description:
SINGLE CONTACT, FOR STD. BASE SOCKETS, W/TERM. AND 5/8 IN. WAFER, PLATED STEEL SPRING, CHAMPION NO. 8-103 OR EQUAL


description:
Engines, Diesel (Automotive) and Replacement Parts


description:
8.2 LITER, CORE ONLY (DETROIT), CHEVROLET NO. CE8926442 OR EQUAL


description:
PARTS, DETROIT DIESEL ENGINE (DETROIT OR EQUAL)


description:
SCREW, VALVE COVER, 1-1/2 IN. L X 1/4 IN. SAE, W/SPRING WASHERS, FOR 8.2 ENGINE, NO. 8926674


description:
SLEEVE, WEAR, HARMONIC BALANCER, SHAFTS 3.000 - 3.006 IN. O.D., FOR 8.2 DETROIT DIESEL ENGINE, NATIONAL NO. 99300 OR EQUAL


description:
Engines, Gasoline: Complete, Short Block, and Parts


description:
CAM BEARING, CLEVITE NO. SH1208S OR EQUAL


description:
FLANGE, FAFNIR NO. GRA-104-KRRB OR EQUAL


description:
MAIN, .001, SEAL POWER NO. MS-909P-1 OR EQUAL


description:
PILOT BEARING, BCA NO. 205-SS OR EQUAL, 1 IN. I.D. X 1-1/16 IN. O.D. X 19/32 IN. THICK


description:
ROLLER, TAPERED, TIMKEN NO. L68110 OR EQUAL


description:
THROW-OUT BEARING, BCA NO. FO1447C OR EQUAL


description:
THROW-OUT BEARING, BCA NO. FO1757C OR EQUAL


description:
THROW-OUT BEARING, BCA NO. 02135 OR EQUAL


description:
THROW-OUT BEARING, BCA NO. V1505C OR EQUAL


description:
CYLINDER KIT, CLEVITE NO. RKA1658N OR EQUAL


description:
HEAD, CYLINDER, FOR DODGE 225 C.I.D., 6 CYLINDER


description:
KARMAN RUBBER NO. K65 OR EQUAL, 2 IN. DIA. X 1-5/8 IN. STUD, 3/8 IN.-16 THREAD


description:
KARMAN RUBBER NO. K75 OR EQUAL, 2 IN. DIA. X 1-1/8 IN. STUD, 3/8-16 THREAD. W/3/4 IN. CYLINDER VIBRATION ISOLATORS


description:
RUBBER, 2-3/4 IN. D. X 10-7/16 IN. T., W/3/4 IN. CENTER BOLT HOLE, F/GM DUMP TRUCKS W/8.2 LITER ENGINES, CHEVROLET NO. 3876337 OR EQUAL


description:
RUBBER, 2-3/4 IN. D. X 1-3/8 IN. T., W/3/4 IN. CENTER BOLT HOLE, F/GM DUMP TRUCKS W/8.2 LITER ENGINES, CHEVROLET NO. 3908576 OR EQUAL


description:
CYLINDER PACKING, FERGUSON NO. PA75D391 OR EQUAL


description:
OIL SENDER UNIT, STEWART WARNER NO. 279-A OR EQUAL


description:
3/32 IN., RETAINER, TIF NO. 47610 OR EQUAL


description:
5/32 IN., RETAINER, TIF NO. 47614 OR EQUAL


description:
7/32 IN., RETAINER, TIF NO. 47617 OR EQUAL


description:
1/4 IN., RETAINER, TIF NO. 47618 OR EQUAL


description:
5/8 IN., RETAINER, TIF NO. 47628 OR EQUAL


description:
7/8 IN., RETAINER, TIF NO. 47632 OR EQUAL


description:
COVER, DETROIT-DIESEL ALLISON NO. 8924128 OR EQUAL


description:
INJECTOR LIGHT, DETROIT-DIESEL ALLISON NO. 8923576 OR EQUAL


description:
SHIM, VALVE SPRING - BALKAMP NO. 600-1303 OR EQUAL


description:
SHIM, VALVE SPRING - BALKAMP NO. 600-1304 OR EQUAL


description:
SOLENOID, FUEL, DETROIT-DIESEL ALLISON NO. 8923206 OR EQUAL


description:
Exhaust System: Clamps, Exhaust Pipes, Mufflers, Tailpipes, etc.


description:
1-1/2 IN. STD. DUTY FULL CIRCLE , 5/16 IN. U-BOLT, 13 GA. SADDLE


description:
1-1/2 IN. X 2 IN. TAILPIPE  - WALKER NO. 35263 OR EQUAL


description:
1-5/8 IN. STD. DUTY FULL CIRCLE , 5/16 IN. U-BOLT, 13 GA. SADDLE


description:
1-7/8 IN. I.D. STD. DUTY FULL CIRCLE , 5/16 IN. U-BOLT, 13 GA. SADDLE


description:
2-1/8 IN., H.D. FULL CIRCLE , 5/16 IN. U-BOLT SIZE


description:
2-1/8 IN. X 2-1/2 IN., TAILPIPE , WALKER NO. 35264 OR EQUAL


description:
2-1/4 IN., H.D. FULL CIRCLE , WITH 5/16 IN. U-BOLT AND NUTS


description:
2-3/4 IN., H.D. FULL CIRCLE , STAINLESS STEEL, 3 IN. WIDE BAND, 2 BOLT TYPE


description:
3 IN. FULL CIRCLE SPAN  INCL. 7/16 IN. BOLT W/NUT


description:
3-1/2 IN., H.D. FULL CIRCLE , WITH 3/8 IN. U-BOLT AND NUTS


description:
3-1/2 IN. O.D. X 3 IN. I.D. , CHROME STEEL, 7/8 IN. W, 1/4 IN. X 3 IN.MTG. CLAMP, TURBO CHARGER


description:
3-7/8 IN., H.D. HALF CIRCLE  W/3/8 IN. BOLT


description:
4-1/4 IN. O.D. X 3-3/8 IN. I.D. , 7/8 IN. W, CHROME STEEL, 1/4 IN. X 3 IN. MTG. CLAMP, TURBO CHARGER


description:
4-1/4 IN. O.D. X 3-3/8 IN. I.D. , 7/8 IN. W, CHROME, 1/4 IN. X 3-1/4 IN. MTG. CLAMP, TURBO CHARGER


description:
4-7/16 IN., H.D. FULL CIRCLE  W/WELDED SADDLE


description:
4-7/8 IN. W X 5-1/4 IN. L, GALV. STEEL, HORSESHOE SHAPE, HOLD TAILPIPE AND MUFFLER TOGETHER


description:
5 IN. I.D., H.D. FULL CIRCLE , 3/8 IN. U-BOLT, 11 GA., WELDED SADDLE


description:
5 IN. O.D. X 4-1/8 IN. I.D. , 7/8 IN. W, CHROME STEEL, 1/4 IN. X 3-1/2IN. MTG. CLAMP


description:
5 IN. O.D., FLAT, STAINLESS STEEL, FOR EXH. PIPE REPAIR


description:
CONVERTER, CYTALATIC, BRAND LISTED OR EQUAL


description:
EXHAUST EMISSION SYSTEM COMPONENTS AND PARTS


description:
MODULE, DIVERTER, FOR VALVE ON CHEVROLET C60 TRUCK, CHEVROLET NO. 15601546 OR EQUAL


description:
HANGERS, EXHAUST (BRAND AND PART NO. LISTED OR EQUAL)


description:
1 IN. W X 7-1/2 IN. L, METAL STRAP, UNIVERSAL TYPE


description:
1-1/4 IN. W X 9-1/2 IN. L, METAL STRAP, UNIVERSAL TYPE


description:
1-1/2 IN. W, 12 IN. L, FLEX., 3/8 IN. BOLT W/NUT AND WASHER


description:
4-1/2 IN. X 1-7/8 IN. , RUBBER STRAP W/METAL END


description:
8-1/2 IN. DIA., 12 IN. L, H.D. FLEX, HORIZ./VERT. MT.


description:
MUFFLERS, WALKER OR EQUAL (17,000 - 17,999)


description:
6 IN. DIA., 18 IN. L, 2-13/16 IN. INLET/OUTLET, 2 MTG. STRAPS 1-1/2 IN. W X8 IN. L W/90 DEG. BEND, 1/2 IN. OVAL BOLT HOLE


description:
MUFFLERS - WALKER OR EQUAL (21,000 - 21,999 SERIES)


description:
MUFFLERS - WALKER OR EQUAL (22,000 - 23,000 SERIES)


description:
MUFFLERS, EXHAUST - BRAND LISTED OR EQUAL


description:
MUFFLER PARTS AND ACCESS., EXHAUST - BRAND LISTED OR EQUAL


description:
ARRESTER, SPARK, 7 IN. DIA., 12 IN. H, OUTLET 2-1/2 IN. O.D. X 2 IN. L, INLET 2-3/8 IN. O.D. X 3-1/2 IN. L, CHROME/STEEL


description:
CEMENT, MUFFLER, 6 OZ/TUBE, KLEEN-FLO NO. 450 OR EQUAL


description:
TAILSPOUT, 2-1/8 IN. DIA., 10 IN. L, STYLE B (I.D.)


description:
TAILSPOUT, 2-1/2 IN. DIA., 7 IN. L, STYLE B (I.D.)


description:
TAILSPOUT, 2-1/2 IN. DIA., 10 IN. L, STYLE A (O.D.)


description:
TAILSPOUT, 2-3/4 IN. DIA., 12 IN. L, STYLE A (O.D.)


description:
3-1/2 IN. I.D. INLET, 36 IN. L, ANGLED, ALUMINIZED, STYLE D


description:
1-1/2 IN. DIA., 4-1/2 IN. L, FOR POLLUTION CONTROL


description:
1-5/8 IN. RIGID, STRAIGHT - WALKER NO. 49003


description:
1-7/8 IN. RIGID, STRAIGHT - WALKER NO. 49020


description:
2-1/4 IN. I.D. X 29 IN. L, 2-3/8 IN. O.D., 8 CYL. FOR CATALYTIC CONV. TO TAILPIPE


description:
2-1/2 IN. I.D., 4 FT. LONG, 3 HOLE TRIANGLE FLANGE, 2-1/2 IN. FLAIR


description:
2-1/2 IN. I.D., 46 IN. LONG, 3 IN. FLAIR


description:
2-1/2 IN. RIGID, STRAIGHT - WALKER NO. 49008


description:
2-1/2 IN. I.D. REDUCED TO 2-1/4 IN. O.D. - WALKER NO. 40165


description:
2-3/4 IN. RIGID, STRAIGHT - WALKER NO. 49009


description:
3 IN. I.D. TAIL END AND 2-3 IN. FLANGED TOP, Y STYLE, TO CONNECT EXH. MANIFOLD TO EXH. PIPE


description:
3-1/2 IN. RIGID, STRAIGHT - WALKER NO. 49011


description:
4 IN. I.D. X 4-1/4 IN. O.D., 1/8 IN. THICK STEEL


description:
4 IN. RIGID, STRAIGHT - WALKER NO. 49012


description:
ELBOW, EXHAUST, 3 IN. DIA., 90 DEG., STEEL, 8 IN. RADIUS


description:
ELBOW, EXHAUST, 4 IN. DIA., 90 DEG., STEEL


description:
EXTENSION, ANGLE, 2-1/4 IN. O.D., 7-3/4 IN. L, STEEL


description:
2-1/4 IN. CLAMP, 2-1/2 IN. INLET, 2-3/8 IN. OUTLET, DUAL


description:
PIPE ACCESSORIES, TAIL - BRAND LISTED OR EQUAL


description:
5-1/2 IN. DIA. X 6-1/2 IN. L, 3 PORT, FOAM FILLED, FORD NO. E5HZ-9G427C OR EQUAL


description:
ALUMINUM, 2-1/2 IN. O.D., 10 IN. LONG, 14 GA.


description:
STAINLESS STEEL, 4 IN. I.D. - 10 FT./ROLL


description:
5/8 IN. SHAFT, 3-1/2 IN. L, 1-5/16 IN. DIA., MANIFOLD TO HYD. PUMP


description:
Filters: Air, Fuel, Oil, Power Steering, Transmission and Water, and PCV Valves


description:
FILTERS, AIR, A C DELCO (NOS. 0-2899) OR EQUAL


description:
FILTERS, AIR, A C DELCO (NOS. 2900-6599) OR EQUAL


description:
FILTERS, AIR, A C DELCO (SERIES A, CB AND FB) OR EQUAL


description:
FILTERS, AIR - CHEVROLET, CHRYSLER, FORD OR EQUAL


description:
CHEVROLET NO. 2499905, FOR AIR COMPRESSOR ON CHEVROLET DUMP TRUCK


description:
FORD NO. F1HZ-6A768A, 13/16 IN. THREAD METAL END FOR PUMP, W/1/2 IN. SLIP PLASTIC END FOR CRANKCASE HOSE


description:
FORD NO. F57Z-9601A, CONICAL, 7 IN. BASE


description:
FORD NO. F5TZ-9600D, PLASTIC HOUSING, V-SHAPED


description:
FORD, 351 ENGINE W/PROPANE CONVERSION, MFG. VORTOX, CANISTER TYPE, ENCLOSED, CLEANER ASSEMBLY


description:
FORD, 302 ENGINE W/PROPANE CONVERSION, MFG. VORTOX, CANISTER TYPE, ENCLOSED, CLEANER ASSEMBLY


description:
NO. CA-3492, ELEMENT, F/1992 GMC 1/2 TON PICKUP


description:
NO. CA-7017, ELEMENT, F/1991 CHEVROLET CAPRICE


description:
NO. 46138, ELEMENT, F/1989 CHEVROLET CAVALIER


description:
NO. 46152, ELEMENT, F/5.2 LITER V-8 AUTOMOBILE


description:
FILTERS, AIR - MISCELLANEOUS - BRAND LISTED OR EQUAL


description:
AIR REFINER NO. ANP-140A,  11 IN. O.D. X 3 IN. H


description:
DIESEL INJECTION NO. G503AF, 23 IN. X 1/2 IN. W/GASKET, 7 IN. X 5/16 IN. O.D., 3/8 IN. I.D.


description:
ONAN NO. 1402379N, 3 IN. H X 4 IN. DIA., FOAM


description:
VORTOX NO. VF-60E, 4-1/2 IN. DIA. X 5 IN., FOR PROPANE CONVERSION


description:
FILTER ELEMENTS, PRE-CLEANER - BRAND LISTED OR EQUAL


description:
JOHN DEERE NO. M-74285 (FOAM), 2-1/2 IN. H. X 6-3/4 IN. L


description:
BREATHER ASSY., ALUM. HOUSING, W/SCREW ON TOP, INCL. FILTER, LOCK NUTS, GASKET AND BOLTS


description:
CANNISTER, AIR FILTER, 6-1/2 IN.O.D. X 12 IN. L, BLACK METAL, 1 MOUNTING HOLES, VORTOX NO. AN65K OR EQUAL


description:
CANNISTER, AIR FILTER, 6-1/2 IN.O.D. X 12 IN. L, BLACK METAL, 2 MOUNTING HOLES, VORTOX NO. AN65B OR EQUAL


description:
COVER, FILTER, BENDIX NO. 279903 OR EQUAL - TO BE USED WITH AIR FILTER AC DELCO NO. A371C


description:
GASKET, 4-1/4 IN. O.D. X 3-1/2 IN. I.D., 3 HOLE, PAPER VORTOX NO. G1130 OR EQUAL


description:
GASKET, 5-1/2 IN. O.D. X 5 IN. I.D., 1/16 IN. THICK PAPER, VORTOX NO. G166 OR EQUAL


description:
HOUSING, F/AC DELCO AIR FILTER NO. A1096C, CHEVROLET NO. 25163341


description:
HOUSING, 11 IN.O.D. X 3 IN. H, AIR REFINER NO. ANP140A OR EQUAL


description:
HOUSING, 14 IN. X 9 IN. X 9 IN., 2 MTG. HOLES, TWO 3 IN. AIR INLETS, PLASTIC, FOR PROPANE CONVERTED PICKUPS


description:
1-5/8 IN. L X 1 IN. DIA., WITH 1/8 IN. THREADED HOLE, FORD NO. C6HZ-9N622A OR EQUAL


description:
FILTERS, FUEL, A C DELCO (SERIES CG, G AND PG) OR EQUAL


description:
FILTERS, FUEL, A C DELCO (SERIES T AND TP) OR EQUAL


description:
FILTERS, FUEL, A C DELCO (SERIES GF) OR EQUAL


description:
NO. G-7019, ELEMENT, F/CHRYSLER 2.2 LITER ENGINE


description:
FILTERS, FUEL - FORD AND INTERNATIONAL OR EQUAL


description:
FORD NO. F4HZ-9162-B, PRE-FILTER AND SCREEN


description:
INTERNATIONAL NO. 1677004C91, ELEMENT, PRIMARY


description:
INTERNATIONAL NO. CH15553, 1-3/8 IN. DIA. X 2-5/8 IN. L


description:
NO. 33136, ELEMENT, F/1992 GMC 1/2 TON PICKUP


description:
NO. 33215, ELEMENT, F/703 LITER DIESEL ENGINE


description:
NO. 33296, 3 IKN. DIA. X 3 IN. L, W/1/4 IN. STEM EACH END


description:
FILTERS, FUEL - MISCELLANEOUS - BRAND LISTED OR EQUAL


description:
ADVANCED FUEL COMPONENTS NO. 418F, 3/4 IN. L X 7/8 IN O.D. X 11/16 IN. I.D., FIBER FILTER W/O-RING


description:
DUETZ NO. 175.19, FOR RUGGERINI DIESEL ENGINE


description:
GOLDEN ROD NO. 495, INCLUDES HEAD, BOWL AND FILTER


description:
IMPCO NO. F110, DISC STYLE, 1/8 IN. THICK, 3-1/4 IN. RADIUS, FOR ALTERNATIVE FUEL VEHICLES


description:
L. E. KLEIN NO. F81, OHG, PAD, 2-1/2 IN. DIA., 100% COTTON


description:
LOMBARDINI NO. 2175.009  (MOUNTS INSIDE FUEL TANK)


description:
ONAN NO. 1492333, 30 MICRON, FOR ONAN POWER PLANT


description:
WATERGUARD NO. WGF40510SP, SCREW-ON TYPE W/GASKET


description:
BOWL, FUEL FILTER - BALDWIN NO. B-10-AL-BOWL


description:
BOWL, FUEL FILTER - FORD NO. E7HA-9A343A, 3-3/32 IN. I.D. X 1-13/16 IN. D


description:
BUSHING, ALUMINUM, REDUCING, 1 IN. LONG, 1-5/16 IN. NC O.D. TO 13/16 IN. NC I.D


description:
BUSHING, ALUMINUM, REDUCING, 1 IN. LONG, 1-5/16 IN. NC O.D. TO 17/32 IN. NF I.D


description:
COOLANT, FUEL FILTER, CATERPILLAR NO. 111-2370 OR EQUAL


description:
GASKET, 5-1/8 IN.O.D. X 4-7/8 IN.I.D. X 1/8 IN. THICK, RUBBER, SAVANE CUT, RACOR NO. 11007 OR EQUAL


description:
O-RING, FILTER, RUBBER, RACOR NO. A1471 OR EQUAL


description:
REPAIR KIT, BALL CHECK SEAL, 3 PCS/KIT, 3/4 IN. STEEL BALL CHECK, 1-1/8 IN.O.D. X 1 IN.I.D. METAL ADAPTER STEEL RING, 1 IN.O.D. X 5/8 IN.I.D. RUBBER CHECK BALL SEAL, RACOR NO. RK11028B OR EQUAL


description:
REPAIR KIT, TURBINE CENTRIFUGE, 5 PCS/KIT, 3-5/8 IN. W X 3 IN. H, PLASTIC, CONICAL BAFFLE 4-5/8 IN. W X 1-1/2 IN. H, RUBBER GASKET, RACOR NO. RK11026D OR EQUAL


description:
VALVE KIT, FUEL, CNG, 1/4 IN. INLET, 1/4 IN. OUTLET, INCLS. ONE FILTER ELEMENT AND O-RING, ADVANCE FUEL COMPONENTS NO. 418 OR EQUAL


description:
FILTERS, FUEL, VACUUM LOCK, FIBER, FOR LPG CONVERTED VEHICLES


description:
FILTERS, OIL, A C DELCO (SERIES A, AC, ACD, C, FF AND NOS. O THRU 25000) OR EQUAL


description:
FILTERS, OIL, A C DELCO (SERIES P, PF, PM AND TF) OR EQUAL


description:
NO. PF-1812, W/CHECK VALVE AND DRAIN BACK


description:
FILTERS, OIL, A C DELCO (SERIES PH) OR EQUAL


description:
FILTERS, OIL - FORD AND INTERNATIONAL OR EQUAL


description:
FILTERS, OIL - MISCELLANEOUS, BRAND LISTED OR EQUAL


description:
DUR-A-LIFT 969-1 OR EQUAL, FOR 1995 GMC 1 TON W/454 ENGINE


description:
RACOR NO. LFS 6028WCF, 28 MICRON, WIRE CLOTH, REUSEABLE, FOR FORD PICKUPS


description:
SUZUKI NO. 1651042501, EXPOSED PAPER ELEMENT (NOT SPIN-ON TYPE)


description:
FILTER PARTS AND ACCESSORIES, OIL (MISC)


description:
PAPER, 12 IN., OIL DRYER AND FILTER, G.E. NO. 3629ZH5199 OR EQUAL, 50/BOX


description:
FILTERS, POWER STEERING - MISCELLANEOUS, BRAND LISTED OR EQUAL


description:
FILTERS, TRANSMISSION - AC DELCO OR EQUAL


description:
FILTERS, TRANSMISSION - BRAND LISTED OR EQUAL


description:
GROMMET, RUBBER, 1-1/4 I. O.D., 3/4 IN. I.D., 5/8 IN. THICK


description:
VALVES, POSITIVE CRANKCASE VENTILATION (PCV), BRAND LISTED OR EQUAL


description:
VALVES, POSITIVE CRANKCASE VENTILATION (PCV), AUTOMOBILE AND TRUCK, A C DELCO 0R EQUAL


description:
FILTERS, POWER STEERING - BRAND LISTED OR EQUAL


description:
GMC NO. 3101874, 3-1/2 IN. DIA. X 2-1/2 IN. H, WITH 7/8 IN. OPENING


description:
KIT, COMBINATION OIL, FUEL, AND AIR, FOR DIESEL ENGINE, AC DELCO NO. TP-994 OR EQUAL


description:
KIT CONSISTS OF ONE EACH OIL, WATER AND FUEL FOR VOLVO DUMP TRUCKS - VOLVO NO. 013954900, 103378400, 1001702200 AND 1000000000 OR EQUAL


description:
1/2 IN., SOLEBERG NO. FS-145-50 OR EQUAL


description:
3/4 IN., SOLEBERG NO. FS-145-75 OR EQUAL


description:
10-1/2 IN. L X 7-1/2 IN. W X 7-1/2 IN. H, CUSTOM MADE, FABRICATED, SHEET METAL, F/AC DELCO NO. A-1096C AIR FILTER


description:
AIR FILTER, 7-11/16 IN. O.D. X 2 IN. H X 5-3/4 IN. I.D., GANN NO. F-94 OR EQUAL


description:
AIR FILTER, CONICAL SHAPED, 12 IN. H X 3-3/4 IN. TOP X 5-1/2 IN. BOTTOM, VORTEX NO. VF57-B


description:
AIR FILTER, 6-13/16 IN. X 6-5/8 IN., FOR CA42J CARBURETORS ON 1994-1996 DODGE VEHICLES, IMPCO NO. F1-15 OR EQUAL


description:
FUEL FILTER, LOCKOFF, LPG CONVERTER, FIBER, 7/8 IN. O.D. X 5/8 IN. H WITH O-RING, ADVANCED FUEL COMPONENTS NO. FL-4748 OR EQUAL


description:
FUEL FILTER, ROUND FIBER PAD, 3-1/4 IN.O.D., 3/16 IN. THICK, VORTOX NO. VFF-30 OR EQUAL


description:
FUEL FILTER, VACUUM, LOW FIBER, ROUND, 3-1/2 IN. O.D. X 1/4 IN. THICK


description:
FITTINGS, BRASS I.P.S. - BRAND LISTED OR EQUAL


description:
ELBOW, STREET, 1/8 IN., 45 DEG. - 25/PKG.


description:
ELBOW, STREET, 3/8 IN., 45 DEG. - 25/PKG.


description:
ELBOW, STREET, 1/2 IN, 45 DEG. - 25/PKG.


description:
ELBOW, STREET, 3/4 IN., 45 DEG. - 25/PKG.


description:
ELBOW, FEMALE, FLARED, 90 DEG, 1/8 IN. MP X 1/8 IN. - 25/PKG.


description:
NIPPLE, CLOSE X 1/8 IN., EDELMANN NO. B-112 - 25/PKG.


description:
NIPPLE, CLOSE X 1/4 IN., EDELMANN NO. B-112 - 25/PKG.


description:
NIPPLE, CLOSE X 3/8 IN., EDELMANN NO. B-112 - 25/PKG.


description:
NIPPLE, HEX, 1/4 IN. X 1/8 IN. - 25/PKG.


description:
FITTINGS, BRASS I.P.S., EASTMAN OR EQUAL


description:
BUSHING, REDUCING, 1/4 X 1/8 IN., NO. 109HXD1 - 25/PKG


description:
BUSHING, REDUCING,  3/8 X 1/8 IN., NO. 109LXD1 - 25/PKG


description:
BUSHING, REDUCING, 3/8 X 1/4 IN., NO. 109LXH1 - 25/PKG


description:
BUSHING, REDUCING, 1/2IN. X 1/8 IN.  - 25/PKG.


description:
BUSHING, REDUCING, 1/2IN.  X 1/4 IN., NO. 109PXH1 - 25/PKG


description:
BUSHING, REDUCING, 1/2 IN. X 3/8 IN., NO. 109PXL1 - 25/PKG


description:
BUSHING, REDUCING, 3/4 IN. X 3/8 IN., NO. 109YXL1 - 25/PKG


description:
BUSHING, REDUCING, 3/4 IN. X 1/2 IN., NO. 109YXP1 - 25/PKG


description:
ELBOW, STREET, 1/8 IN., NO. 102D1  - 25/PKG


description:
ELBOW, STREET, 1/4 IN.,NO. 102H1  - 25/PKG


description:
COUPLING, REDUCING, 1/4 IN. X 1/8 IN., NO. 107HXD1 - 25/PKG


description:
ELBOW, STREET,  3/8 IN., NO. 102L1  - 25/PKG


description:
COUPLING, REDUCING,  3/8 IN. X 1/8 IN., NO. 108LXD1 - 25/PKG.


description:
COUPLING, REDUCING,  3/8 IN. X 1/4 IN., NO. 108LXH1 - 25/PKG


description:
COUPLING, REDUCING,  1/2 IN. X 3/8 IN., NO. 108PXL1 - 25 PKG.


description:
ELBOW, STREET, 1/4 IN., NO. 102H1 - 25/PKG


description:
ELBOW, STREET, 3/8 IN., NO. 102L1 - 25/PKG


description:
ELBOW, STREET,  1/2 IN., NO. 102P1 - 25/PKG.


description:
COUPLING, REDUCING,  1/4 IN. X 1/8 IN., NO. 108HXD1  -  25/PKG.


description:
NIPPLE, CLOSE, 1/8 IN., NO. 115D1 - 25/PKG


description:
NIPPLE, CLOSE, 3/8 IN., NO. 115L1 - 25/PKG


description:
NIPPLE, CLOSE,  1/2 IN., NO. 115P1 - 25/PKG


description:
NIPPLE, 3/8 IN. , 2 IN. LONG, NO. 115LXO2001 - 25/PKG


description:
NIPPLE, 1/2 IN. , 2 IN. LONG, NO. 115PXO2001 - 25/PKG


description:
BUSHING, REDUCING, 1/4 IN. X 1/8 IN., NO. 109HXD1  -  25/PKG.


description:
BUSHING, REDUCING,  3/8 IN. X 1/8 IN., NO. 109LXD1 -  25/PKG.


description:
NIPPLE, HEX, 1/8 IN., NO. 116D1 - 25/PKG.


description:
NIPPLE, HEX, 1/4 IN., NO. 116H1 - 25/PKG


description:
NIPPLE, REDUCING, HEX,  1/4 IN. X 1/8 IN., NO. 116 - 25/PKG.


description:
NIPPLE, REDUCING, HEX,  3/8 IN. X 1/4 IN., NO. 116RC - 25/PKG.


description:
BUSHING, REDUCING,  3/8 IN. X 1/4 IN., NO. 109LXH1 -  25/PKG


description:
NIPPLE, HEX, 3/8 IN., NO. 116L1 - 25/PKG.


description:
BUSHING, REDUCING,  1/2 IN. X 1/4 IN., NO. 109PXH1 -  25/PKG.


description:
BUSHING, REDUCING, 1/2 IN. X 3/8 IN., NO. 109PXL1  -  25/PKG.


description:
BUSHING, REDUCING, 3/4 IN. X 3/8 IN., NO. 109YXL1  -  25/PKG.


description:
BUSHING, REDUCING, 3/4 IN. X 1/2 IN., NO. 109YXP1   - 25/PKG


description:
PLUG, HEX HEAD, 1/8 IN., NO. 118D1 - 25/PKG


description:
PLUG, HEX HEAD, 1/4 IN., NO. 118H1 - 25/PKG


description:
PLUG, HEX HEAD, 3/8 IN., NO. 118L1 - 25/PKG


description:
PLUG, HEX HEAD, 1/2 IN., NO. 118P1 - 25/PKG


description:
PLUG, SQUARE HEAD, 1/8 IN., NO. 111D1 - 25/PKG.


description:
PLUG, SQUARE HEAD, 1/4 IN., NO. 111H1 - 25/PKG


description:
PLUG, SQUARE HEAD, 3/8 IN., NO. 111L1 - 25/PKG


description:
PLUG, HEX HEAD,  1/8 IN.,  NO. 118D1  - 25/PKG


description:
PLUG, HEX HEAD,  1/4 IN., NO. 118H1  - 25/PKG


description:
PLUG, HEX HEAD,  3/8 IN., NO. 118L1  - 25/PKG


description:
PLUG, HEX HEAD,  1/2 IN., NO. 118P1  - 25/PKG


description:
ADAPTER, 3/8 IN. F X 1/4 IN. M, NO. 122LXH1 - 25/PKG.


description:
CONNECTOR, 1/8 IN. M X 1/8 IN. F  - 25/PKG.


description:
CONNECTOR, FEMALE, 3/16 IN. X 1/8 IN.  - 25/PKG.


description:
CONNECTOR, FEMALE,  5/16 IN. X 1/8 IN.  - 25/PKG.


description:
CONNECTOR, FEMALE,  3/8 IN. X 1/4 IN.  - 25/PKG.


description:
CONNECTOR, FEMALE, POLY-FLO, T 1/2 IN. X F 3/8 IN., IMPERIAL NO. 266-P


description:
CONNECTOR, MALE,  1/8 IN. X 1/8 IN.  - 25/PKG.


description:
CONNECTOR, MALE, 3/16 IN. X 1/8 IN.  - 25/PKG.


description:
CONNECTOR, MALE, 1/4 IN. X 1/8 IN.  - 25/PKG.


description:
CONNECTOR, MALE, 1/4 IN. X 1/4 IN.  - 25/PKG.


description:
CONNECTOR, MALE, 1/4 IN. NPT X 1/4 IN. NPT  - 25/PKG


description:
CONNECTOR, MALE, 1/4 IN. NTA X 1/8 IN. MPT, TIF 37911 OR EQUAL - 25/PKG


description:
CONNECTOR, MALE, 1/4 IN. X 3/8 IN.  - 25/PKG.


description:
CONNECTOR, MALE, 1/4 IN. NTA X 3/8 IN. MPT, PAK68NTA46 OR EQUAL  - 25/PKG


description:
CONNECTOR, MALE,  5/16 IN. X 1/8 IN.  - 25/PKG.


description:
CONNECTOR, MALE,  5/16 IN. X 1/4 IN.  - 25/PKG.


description:
CONNECTOR, MALE,  3/8 IN. X 1/8 IN.  - 25/PKG.


description:
CONNECTOR, MALE,  3/8 IN. X 1/4 IN.  - 25/PKG.


description:
CONNECTOR, MALE,  3/8 IN. NTA X 1/4 IN. MPT, TIF37914 OR EQUAL  - 25/PKG


description:
CONNECTOR, MALE,  1/2 IN. X 3/8 IN.  - 25/PKG.


description:
CONNECTOR, MALE,  1/2 IN. NTA X 3/8 IN. MPT , PAK68NTA-8-6 OR EQUAL  - 25/PKG.


description:
CONNECTOR, MALE, POLY-FLO, T 1/2 IN. X F 3/8 IN., IMPERIAL NO. 268-P


description:
CONNECTOR, MALE, STOP,  1/8 IN.  - 25/PKG.


description:
CONNECTOR SET,  9/16 IN. -18 M-THREAD AND L-HAND M-THREAD


description:
COUPLER, REDUCING, FEMALE,  1/2 IN. X 3/8 IN., PAK208-P-6 OR EQUAL  -  25/PKG.


description:
ELBOW, 45 DEG. 1/8 IN. MP X 3/16 IN. IF  - 25/PKG.


description:
ELBOW, FEMALE, 45 DEG.,  1/4 IN. X 1/4 IN.  - 25/PKG.


description:
ELBOW, FEMALE, 90 DEG.,  3/8 IN. X 3/8 IN. - 25/PKG.


description:
ELBOW, FEMALE, 90 DEG.,  1/8 IN. X 1/8 IN.  - 25/PKG.


description:
ELBOW, FEMALE, 90 DEG.,  1/4 IN. X 1/8 IN., TIF37946 OR EQUAL  - 25/PKG


description:
ELBOW, FEMALE, 90 DEG.,  1/4 IN. X 3/8 IN.  - 25/PKG.


description:
ELBOW, FEMALE, 90 DEG.,  3/8 IN. X 1/4 IN., TIF37947 OR EQUAL  - 25/PKG


description:
ELBOW, MALE, 45 DEG., 3/16 IN. X 1/8 IN.  - 25/PKG.


description:
ELBOW, MALE, 45 DEG., 1/4 IN. X 1/8 IN., TIF37976 OR EQUAL  - 25/PKG


description:
ELBOW, MALE, 45 DEG.,  1/4 IN. X 1/4 IN.  - 25/PKG.


description:
ELBOW, MALE, 45 DEG.,  5/16 IN. X 1/8 IN.  - 25/PKG.


description:
ELBOW, MALE, 45 DEG., 1/2 IN. X 1/4 IN., TIF37980 OR EQUAL  - 25/PKG


description:
ELBOW, MALE, 45 DEG.,  1/2 IN. X 3/8 IN., TIF37979 OR EQUAL  - 25/PKG.


description:
ELBOW, MALE, 45 DEG., 1/2 IN. X 1/2 IN., TIF37981 OR EQUAL  - 25/PKG


description:
ELBOW, MALE, 90 DEG.,  1/8 IN. C X 1/8 IN. P  - 25/PKG.


description:
ELBOW, MALE, 90 DEG.,  1/4 IN. X 1/4 IN., TIF37928 OR EQUAL  - 25/PKG


description:
ELBOW, MALE, 90 DEG.,  1/4 IN. X 3/8 IN., TIF37929 OR EQUAL  - 25/PKG.


description:
ELBOW, MALE, 90 DEG.,  1/4 IN. P X 3/8 IN. M  - 25/PKG.


description:
ELBOW, MALE, 90 DEG., 3/8 IN. X 1/8 IN., TIF37932 OR EQUAL  - 25/PKG


description:
ELBOW, MALE, 90 DEG., 1/2 IN. X 1/4 IN., TIF37938 OR EQUAL  - 25/PKG


description:
ELBOW, MALE, FLEX-TUBE, T 5/16 IN. X M 1/4 IN., IMPERIAL NO. 69-FL OR EQUAL


description:
ELBOW, HALF UNION, 90 DEG.,  1/4 IN. F X 1/8 IN. M  - 25/PKG.


description:
ELBOW, HALF UNION, 90 DEG.,  3/8 IN. M X 1/2 IN. F . - 25/PKG.


description:
ELBOW, HYDRAULIC, 90 DEG., 1/4 IN. JIC X 1/4 IN. M  - 25/PKG.


description:
ELL, PIPE, STREET, 90 DEG., 3/8 IN.,  PAK2202P-6-6 OR EQUAL  - 25/PKG


description:
ELL, PIPE, STREET, 90 DEG.,  1/2 IN. X 1/2 IN., PAK2202P-8-8 OR EQUAL  -  25/PKG.


description:
RING, SEAL, SELF-LOCKING, 1/4 IN.  - 25/PKG.


description:
RING, SEAL, SELF- LOCKING, 5/16 IN.  - 25/PKG.


description:
SLEEVE, SPLIT, 1/8 IN., TIFCO NO. 37740 OR EQUAL  - 25/PKG


description:
TEE,  1/4 IN. C X 1/8 IN. P X 1/4 IN. C, MPT  - 25/PKG.


description:
TEE,  1/4 IN. C X 1/4 IN. C X 1/8 IN. P, MPT  - 25/PKG.


description:
TEE,  1/4 IN. C X 1/4 IN. P X 1/4 IN. C, MPT  - 25/PKG.


description:
TEE, BRANCH, FEMALE,  1/2 IN. X 1/4 IN., TIF 37973 OR EQUAL-  25/PKG


description:
TEE, BRANCH, MALE,  1/2 IN. X 3/8 IN., TIF37963 OR EQUAL  - 25/PKG


description:
TEE, BRANCH, MALE,  1/2 IN. X 3/8 IN. X 3/8 IN., TIF37964 OR EQUAL  - 25/PKG


description:
TEE, MALE,  1/4 IN. X 1/8 IN.  - 25/PKG.


description:
TEE, MALE,  3/8 IN. X 1/4 IN.  - 25/PKG.


description:
TEE, MALE, FPT,  3/8 IN. C X 1/4 IN. P X 3/8 IN. C  - 25/PKG.


description:
TEE, UNION,  1/4 IN. X 3/8 IN. X 3/8 IN., TIF37893 OR EQUAL - 25/PKG


description:
TEE W/NUT AND SLEEVE,  3/16 IN. X 1/8 IN.  - 25/PKG.


description:
TEE W/NUT AND SLEEVE,  1/4 IN. X 1/8 IN.  - 25/PKG.


description:
TEE W/NUT AND SLEEVE,  5/16 IN. MPT  - 25/PKG.


description:
TEE W/NUT AND SLEEVE,  5/16 IN. X 1/8 IN.  - 25/PKG.


description:
TEE W/NUT AND SLEEVE,  3/8 IN. X 1/4 IN.  - 25/PKG.


description:
TEE W/NUT AND SLEEVE,  3/8 IN. FPT  - 25/PKG.


description:
TEE W/NUT AND SLEEVE,  3/8 IN. MPT  - 25/PKG.


description:
UNION, HALF,  1/8 IN. P X 1/8 IN. C  - 25/PKG.


description:
UNION, HALF,  1/8 IN. P X 3/16 IN. C  - 25/PKG.


description:
UNION, HALF,  1/8 IN. MP X 1/4 IN. FF  - 25/PKG.


description:
UNION, HALF,  1/8 IN. MP X 5/16 IN. FF  - 25/PKG.


description:
UNION, HALF,  1/4 IN. MP X 1/8 IN. FF  - 25/PKG.


description:
UNION, HALF,  1/4 IN. MF X 3/16 IN. FF  - 25/PKG.


description:
UNION, HALF, FEMALE,  1/4 X 1/8 IN.  - 25/PKG.


description:
UNION, HALF, FEMALE,  3/16 IN. X 1/8 IN.  - 25/PKG.


description:
UNION, HALF, MALE,  1/8 IN. X 1/8 IN.  - 25/PKG.


description:
UNION, HALF, MALE,  3/16 IN. X 1/4 IN.  - 25/PKG.


description:
UNION, HALF, MALE,  3/8 IN. X 1/8 IN.  - 25/PKG.


description:
UNION, BULKHEAD, 1/2 IN.,  TIF37969 OR EQUAL  - 25/PKG


description:
UNION, HALF, MALE, 3/8 IN. X 1/4 IN. - 25/PKG.


description:
UNION, BULKHEAD, POLYFLO, T 1/4 IN., IMPERIAL NO. 282-PT


description:
UNION, HALF, MALE, 3/8 IN. X 1/2 IN. - 25/PKG.


description:
UNION, FULL, 3/16 IN., NO. B-62 - 25/PKG.


description:
UNION, FULL, 1/4 IN.,  NO. B-62 - 25/PKG.


description:
UNION, POLY-FLO, T 3/8 IN., IMPERIAL NO. 262-P OR EQUAL


description:
UNION, POLY-FLO, T 1/2 IN., IMPERIAL NO. 262-P OR EQUAL


description:
UNION, SWEAT TO MALE PIPE THREAD,3/4 IN.  - 25/PKG.


description:
UNION, SWEAT TO MALE PIPE THREAD, 1 IN.  - 25/PKG.


description:
UNION, SWEAT TO MALE PIPE THREAD, 1-1/4 IN.   - 25/PKG.


description:
UNION, SWEAT TO MALE PIPE THREAD, 1-1/2 IN.   - 25/PKG.


description:
UNION, SWEAT TO MALE PIPE THREAD, 1-3/4 IN.   - 25/PKG.


description:
UNION, SWEAT TO MALE PIPE THREAD, 2-1/4 IN.   - 25/PKG.


description:
UNION W/NUTS ON BOTH ENDS, 1/4 IN.  - 25/PKG.


description:
FITTINGS, BRASS, PIPE TO HOSE, EASTMAN OR EQUAL


description:
3/4 IN. FIP X 3/4 IN. MHT, NO. H-6 - 12/PKG


description:
3/4 IN. FHT X 3/4 IN. FIP, NO. H-15  - 12/PKG


description:
3/4 IN. FHT X 3/4 IN. FIP, NO. 836H - 12/PKG


description:
FITTINGS, BRASS, PIPE TO HOSE - BRAND LISTED OR EQUAL


description:
COUPLING, FUEL HOSE,  1/8 IN. PIPE X 1/4 IN.  - 25/PKG.


description:
COUPLING, 1/4 IN. TUBING X 1/8 IN. MPT - 25/PKG.


description:
COUPLING, 1/4 IN. TUBING X 1/4 IN. MPT  - 25/PKG.


description:
COUPLING, FUEL HOSE,  1/4 IN. PIPE X 1/4 IN.  - 25/PKG.


description:
COUPLING, FUEL HOSE,  3/4 IN. FP X 3/4 IN.  - 25/PKG.


description:
COUPLING, MH, 3/4 IN. FP X 3/4 IN.  - 25/PKG.


description:
FITTINGS, BRASS, COMPRESSION TYPE TUBE, EASTMAN OR EQUAL


description:
BALL CHECK, 1/8 X 1/8 IN. , NO. 63C - 25/PKG.


description:
CONNECTOR, FEMALE, 3/16 IN. X 1/8 IN. , NO. 66F  -  25/PKG.


description:
CONNECTOR, FEMALE,  1/4 IN. X 1/4 IN. , NO. 66F  -  25/PKG.


description:
CONNECTOR, FEMALE, 3/8 IN. , NO. 66F - 25/PKG.


description:
CONNECTOR, FEMALE, 3/8 IN. X 1/4 IN. , NO. 66F  -  25/PKG.


description:
CONNECTOR, MALE TUBE TO MPT, 1/16 X 1/8 IN. , - NO.68-F  25/PKG.


description:
CONNECTOR, MALE TUBE TO MPT, 1/4 X 1/8 IN.,  NO. 68-F  -  25/PKG.


description:
CONNECTOR, MALE, 1/4 IN. X 1/4 IN. , NO. 68CM  -  25/PKG.


description:
CONNECTOR, MALE TUBE TO MPT, 5/16 X 1/8 IN. , NO. 68-F  -  25/PKG.


description:
CONNECTOR, MALE, 5/16 IN. X 1/8 IN. , NO. 68CM  -  25/PKG.


description:
CONNECTOR, MALE, 5/16 IN. X 1/4 IN. , NO. 68CM  -  25/PKG.


description:
CONNECTOR, MALE, 3/8 IN. X 1/8 IN. , NO. 68CM  -  25/PKG.


description:
CONNECTOR, MALE, 3/8 IN. X 1/4 IN. , NO. 68CM  -  25/PKG.


description:
CONNECTOR, MALE, 3/8 IN. X 3/8 IN. , NO. 68CM  -  25/PKG.


description:
CONNECTOR, MALE, 3/8 IN. X 1/2 IN. , NO. 68CM  -  25/PKG.


description:
CONNECTOR, MALE, 7/16 IN. X 1/4 IN. , NO. 68CM  -  25/PKG.


description:
CONNECTOR, MALE, 1/2 IN. X 3/8 IN. , NO. 68CM  -  25/PKG.


description:
CONNECTOR, MALE, 1/2 IN. X 1/2 IN. , NO. 68CM  -  25/PKG.


description:
CONNECTOR, MALE,  5/8 IN. X 1/2 IN. , NO. 68CM  -  25/PKG.


description:
CONNECTOR, MALE, 3/4 IN. X 1/2 IN. , NO. 68CM  -  25/PKG.


description:
COUPLING, FEMALE, 1/8 X 3/16 IN. , NO. 66F - 25/PKG.


description:
COUPLING, FEMALE, 3/8 X 1/4 IN. , NO. 66F - 25/PKG.


description:
COUPLING, FEMALE, 3/16 IN. X 1/4 IN. , NO. 66F - 25/PKG.


description:
ELBOW, MALE, 3/16 X 1/8 IN. , NO. 69CFXD1 - 25/PKG.


description:
ELBOW, MALE, 3/16 IN. X 1/8 IN.,  NO. 69-CM - 25/PKG.


description:
ELBOW, MALE, 1/4 X 1/8 IN. , NO. 69CHXD1 - 25/PKG


description:
ELBOW, MALE, 1/4 IN. X 1/8 IN.,  NO. 69-CM - 25/PKG.


description:
ELBOW, MALE, 1/4 X 1/4 IN. , NO. 69CHXH1 - 25/PKG


description:
ELBOW, MALE, 1/4 NPT X 1/4 IN. , NO. 69F0404 - 25/PKG


description:
ELBOW, MALE, 1/4 IN. X 1/4 IN.,  NO. 69-CM - 25/PKG.


description:
ELBOW, MALE, 5/16 IN. X 1/8 IN. , NO. 69CM  -  25/PKG.


description:
ELBOW, MALE, 5/16 X 1/4 IN. , NO. 69CJXH1 - 25/PKG.


description:
ELBOW, MALE, 5/16 IN. X 1/4 IN.,  NO. 69-CM - 25/PKG.


description:
ELBOW, MALE, 3/8 IN. X 1/8 IN. , NO. 69CM  -  25/PKG.


description:
ELBOW, MALE, 3/8 X 1/4 IN. , NO. 69CLXH1 - 25/PKG


description:
ELBOW, MALE, 3/8 IN. X 1/4 IN.,  NO. 69-CM - 25/PKG.


description:
ELBOW, MALE, 3/8 IN. X 3/8 IN. , NO. 69CM  -  25/PKG.


description:
ELBOW, MALE, 3/8 IN. X 1/2 IN. , NO. 69CM  -  25/PKG.


description:
ELBOW, MALE, 7/16 IN. X 1/4 IN. , NO. 69CM  -  25/PKG.


description:
ELBOW, MALE, 1/2 X 3/8 IN. , NO. 69CM - 25/PKG.


description:
ELBOW, MALE, 1/2 IN. X 1/2 IN. , NO. 69CM  -  25/PKG.


description:
ELBOW, MALE, 5/8 IN. X 1/2 IN. , NO. 69CM  -  25/PKG.


description:
ELBOW, MALE, 3/4 IN. X 1/2 IN. , NO. 69CM  -  25/PKG.


description:
ELBOW, TUBE, 1/8 IN. , NO. 65C - 25/PKG.


description:
ELBOW, TUBE, 1/4 IN. , NO. 65CH1 - 25/PKG


description:
ELBOW, TUBE, 3/8 IN. , NO. 65CL1 - 25/PKG


description:
ELBOW, TUBE, 5/8 IN. , NO. 65C71 - 25/PKG.


description:
ELBOW, TUBE TO MPT, 5/16 X 1/8 IN., NO. 69F - 25/PKG.


description:
ELBOW, UNION, 5/16 IN., NO. 65F  -  25/PKG


description:
ELBOW, UNION, 3/8 IN., NO. 65F  -  25/PKG


description:
ELBOW, UNION, 7/16 IN., NO. 65F  -  25/PKG


description:
ELBOW, UNION, 1/2 IN., NO. 65F  -  25/PKG


description:
ELBOW, UNION, 5/8 IN.,  NO. 65F  -  25/PKG


description:
ELBOW, UNION, 3/4 IN., NO. 65F  -  25/PKG


description:
TANK FITTING, 1/4 IN. x 1/4 IN., NO. 80F  -  25/PKG.


description:
TEE, THREE TUBE ENDS,  1/8 IN., NO. 64CD1 - 25/PKG


description:
TEE, THREE TUBE ENDS, 1/4 IN., NO. 64CH1 - 25/PKG


description:
TEE, THREE TUBE ENDS,  5/16 IN., NO. 64CJ1 - 25/PKG


description:
TEE, THREE TUBE ENDS, 3/8 IN., NO. 64CL1 - 25/PKG


description:
TEE, MALE BRANCH, 1/8 IN. X 1/8 IN., NO. 72F  -  25/PKG.


description:
TEE, MALE BRANCH,  3/16 IN x 1/8 IN., NO. 72F  -  25/PKG.


description:
TEE, MALE BRANCH,  1/4 IN. x 1/8 IN., NO. 72F  -  25/PKG.


description:
TEE, MALE BRANCH,  5/16 IN. x 1/8 IN., NO. 72F  -  25/PKG.


description:
TEE, MALE BRANCH,  3/8 IN. x 1/4 IN., NO. 72F  -  25/PKG.


description:
TEE, MALE BRANCH,  1/2 IN. x 3/8 IN., NO. 72F  -  25/PKG.


description:
TEE, MALE BRANCH,  5/8 IN. x 1/2 IN., NO. 72F  -  25/PKG.


description:
TEE, MALE BRANCH, 3/4 IN. x 1/2 IN., NO. 72F  -  25/PKG.


description:
TEE, UNION,  1/4 IN., NO. 64F  -  25/PKG.


description:
TEE, UNION,  5/16 IN., NO. 64F  -  25/PKG.


description:
TEE, UNION,  3/8 IN., NO. 64F  -  25/PKG.


description:
TEE, UNION,  7/16 IN., NO. 64F -  25/PKG.


description:
TEE, UNION,  5/8 IN., NO, 64F  -  25/PKG.


description:
TEE, UNION,  1/2 IN., NO. 64F  -  25/PKG.


description:
UNION, HALF, FEMALE, 1/8 IN., NO. 66C - 25/PKG.


description:
UNION, HALF, FEMALE,  3/16 IN., NO. 66C - 25/PKG.


description:
UNION, HALF, FEMALE,  5/16 X 1/8 IN., NO. 66CJXD1 - 25/PKG


description:
UNION, HALF, FEMALE,  3/8 X 1/4 IN., NO. 66CLXH1 - 25/PKG


description:
UNION, HALF, MALE,  1/4 IN. X 3/8 IN., NO. 68CHXL1 - 25/PKG


description:
UNION, HALF, MALE,  5/16 IN. X 1/8 IN., NO. 68CJXD1 - 25/PKG


description:
UNION, HALF, MALE,  5/16 IN. X 1/4 IN., NO. 66CJXH1 - 25/PKG


description:
UNION, HALF, MALE,  5/16 IN. X 3/8 IN.,  I.P.T.,  NO. 68C  -  25/PKG.


description:
UNION, HALF, MALE,  5/16 IN. X 3/8 IN., NO. 68CJXL1 - 25/PKG.


description:
UNION, HALF, MALE,  3/8 IN. X 1/8 IN., NO. 68CLDX1 - 25/PKG


description:
UNION, HALF, MALE,  3/8 IN. X 1/4 IN., NO. 68CLXH1 - 25/PKG


description:
UNION, HALF, MALE,  3/8 IN. X 1/4 IN., I.P.T., NO. 68CLXH1 - 25/PKG.


description:
UNION, HALF, MALE,  3/8 IN. X 3/8 IN., NO. 68CLX1 - 25/PKG


description:
UNION, MALE,  1/8 IN., NO. 62F02 - 25/PKG.


description:
UNION, TUBE TO TUBE,  3/8 IN., NO. 62F  -  25/PKG.


description:
UNION, TUBE TO TUBE,  1/2 IN., NO. 62F -  25/PKG.


description:
FITTINGS, BRASS, COMPRESSION TYPE - BRAND LISTED OR EQUAL


description:
CONNECTOR, SEALISTIC, 5/8 IN.   - 25/PKG.


description:
CONNECTOR, SEALISTIC, 3/4 IN.   - 25/PKG.


description:
ELBOW,  3/16 MPT X 1/8 IN. PT  - 25/PKG.


description:
ELBOW, FEMALE, I.P.T., 1/4 X 1/8 IN., NO. B-70   - 25/PKG.


description:
ELBOW, FEMALE, I.P.T., 1/4 X 1/4 IN., NO. B-70 - 25/PKG.


description:
ELBOW, FEMALE, I.P.T., 3/8 X 1/4 IN. NO. B-70 - 25/PKG.


description:
ELBOW, MALE,  1/8 X 1/8 IN. NO. B-69 - 25/PKG.


description:
ELBOW, TUBE, 3/8 IN., NO. B-65 - 25/PKG.


description:
UNION, FEMALE, 1/4 IN., NO. TIF37967 OR EQUAL  -  25/PKG.


description:
UNION, 3/16 IN. TUBE X 1/4 IN. PT  - 25/PKG.


description:
UNION, FEMALE, 1/4 IN.,  TIF37967 OR EQUAL  - 25/PKG.


description:
UNION, REDUCING,  1/8 IN. X 1/4 IN. - 25/PKG.


description:
UNION, REDUCING,  1/4 IN. X 5/16 IN.  - 25/PKG.


description:
UNION, LONG, REDUCING, 1-1/4 IN.,   3/8 IN. TUBING X 1/4 IN. MPT


description:
VALVE, SHUT-OFF, T 1/4 IN., 2 WAY, STRAIGHT, LEVER HANDLE, IMPERIAL NO. 28EF


description:
VALVE, SHUT-OFF, T 1/4 IN. X M 1/8 IN., 2 WAY, STRAIGHT, LEVER HANDLE, IMPERIAL NO. 27EF


description:
VALVE, SHUT-OFF, T 1/4 IN. X M 1/4 IN., 2 WAY, STRAIGHT, LEVER HANDLE, IMPERIAL NO. 227EF


description:
VALVE, SHUT-OFF, T 5/16 IN., 2 WAY, STRAIGHT, LEVER HANDLE, IMPERIAL NO. 30EF


description:
VALVE, SHUT-OFF, T 5/16 IN. X M 1/8 IN., 2 WAY, STRAIGHT, LEVER HANDLE, IMPERIAL NO. 29EF


description:
VALVE, SHUT-OFF, T 5/16 IN. X M 1/4 IN., 2 WAY, STRAIGHT, LEVER HANDLE, IMPERIAL NO. 229EF


description:
VALVE, SHUT-OFF, T 3/8 IN., 2 WAY, STRAIGHT, LEVER HANDLE, IMPERIAL NO. 58EF


description:
VALVE, SHUT-OFF, T 3/8 IN. X M 1/4 IN., 2 WAY, STRAIGHT, LEVER HANDLE, IMPERIAL NO. 57EF


description:
TUBING, 1/2 IN. X 1 IN. LGTH., 11/16 IN. MIDDLE HEX NUT, WEATHERED NO. 62X8- 25/PKG.


description:
FITTINGS, BRASS, HEAVY DUTY FLARE TYPE, EASTMAN OR EQUAL


description:
CONNECTOR, FEMALE,  45 DEG. FLARE, 1/4 IN. X 1/4 IN., NO. 646F -  25/PKG.


description:
CONNECTOR, MALE,  45 DEG. FLARE, 1/4 IN. X 1/4 IN., NO. 648F -  25/PKG.


description:
CONNECTOR, MALE,  45 DEG. FLARE, 3/8 IN. X 1/8 IN., NO. 648F -  25/PKG.


description:
CONNECTOR, MALE,  45 DEG. FLARE, 3/8 IN. X 3/8 IN., NO. 648F -  25/PKG.


description:
CONNECTOR, MALE,  45 DEG. FLARE, 3/8 IN. X 1/2 IN., NO. 648F -  25/PKG.


description:
CONNECTOR, MALE,  45 DEG. FLARE, 1/2 IN. X 3/8 IN., NO. 648F -  25/PKG.


description:
CONNECTOR, MALE,  45 DEG. FLARE, 1/2 IN. X 1/2 IN., NO. 648F -  25/PKG.


description:
COUPLING, FEMALE,  45 DEG. FLARE, 1/4 IN. X 1/8 IN., NO. 664F - 25/PKG.


description:
COUPLING, FEMALE,  45 DEG. FLARE, 1/4 IN. X 1/4 IN., NO. 664F - 25/PKG.


description:
COUPLING, FEMALE,  45 DEG. FLARE, 3/8 IN. X 1/4 IN., NO. 664F - 25/PKG.


description:
COUPLING, FEMALE,  45 DEG. FLARE, 1/2 IN. X 3/8 IN., NO. 664F - 25/PKG.


description:
ELBOW, FEMALE,  45 DEG. FLARE, 1/4 IN. X 1/4 IN., NO. 650F -  25/PKG.


description:
ELBOW, MALE,  45 DEG. FLARE, 1/4 IN. X 1/4 IN., NO. 649F -  25/PKG.


description:
ELBOW, MALE,  45 DEG. FLARE, 3/8 IN. X 1/8 IN., NO. 649F -  25/PKG.


description:
ELBOW, MALE,  45 DEG. FLARE, 3/8 IN. X 1/4 IN., NO. 649F -  25/PKG.


description:
ELBOW, MALE,  45 DEG. FLARE, 3/8 IN. X 3/8 IN., NO. 649F -  25/PKG.


description:
ELBOW, MALE,  45 DEG. FLARE, 1/2 IN. X 1/2 IN., NO. 649F -  25/PKG.


description:
NUT, CAP, 45 DEG. FLARE, 1/4 IN. , NO. 640FB  -  25/PKG.


description:
NUT, CAP, 45 DEG. FLARE, 5/16 IN. , NO. 640FB  -  25/PKG.


description:
NUT, CAP, 45 DEG. FLARE, 3/8 IN. , NO. 640FB  -  25/PKG.


description:
NUT, CAP, 45 DEG. FLARE, 1/2 IN. , NO. 640FB  -  25/PKG.


description:
NUT, CAP, 45 DEG. FLARE, 5/8 IN. , NO. 640FB  -  25/PKG.


description:
NUT, CAP, 45 DEG. FLARE, 3/4 IN. , NO. 640FB  -  25/PKG.


description:
NUT, LONG, 45 DEG. FLARE, 1/4 IN. , NO. 641F  -  25/PKG.


description:
NUT, LONG, 45 DEG. FLARE, 3/8 IN. , NO. 641F  -  25/PKG.


description:
NUT, LONG, 45 DEG. FLARE, 1/2 IN. , NO. 641F  -  25/PKG.


description:
NUT, SHORT, 45 DEG. FLARE, 3/8 IN. , NO. 641FS  -  25/PKG.


description:
TEE, MALE BRANCH, 45 DEG. FLARE, 1/4 IN. X 1/4 IN., NO. 645F  -  25/PKG.


description:
TEE, MALE RUN,  45 DEG. FLARE, 3/8 IN. X 1/4 IN., NO. 651F -  25/PKG.


description:
TEE, UNION, 45 DEG. FLARE, 3/8 IN. , NO. 644F  -  25/PKG.


description:
UNION, 45 DEG. FLARE, 3/8 IN. , NO. 642F  -  25/PKG.


description:
FITTINGS, BRASS, FLARED TYPE TUBE, EASTMAN OR EQUAL


description:
NO. 29B-61, UNION, FULL FLARE, 3/8 IN. X 3/8 IN., 25/PKG


description:
NO. 29B-T1, TEE, MALE, FLARE,  3/8 IN., 25/PKG


description:
NO. 293-FL1, ELBOW, FEMALE, 3/8 IN., 25/PKG


description:
NO. 294-FL1, ELBOW, FEMALE, 3/8 IN., 25/PKG


description:
NO. 293FL, ELBOW, FEMALE, 3/8 IN. X 3/8 IN., 25/PKG


description:
NO. 293-M1, UNION, HALF, MALE, 3/8 IN., 25/PKG


description:
NO. 293-ML1, ELBOW, MALE, 3/8 IN., 25/PKG


description:
NO. 49F, ELBOW, MALE, 5/16 IN. X 1/8 IN., 25/PKG


description:
NO. 294-ML1, ELBOW, MALE, 3/8 IN., 25/PKG


description:
NO. 293-F1, UNION, HALF, FEMALE,  3/8 IN., 25/PKG


description:
NO. 294-F1, UNION, HALF, FEMALE, 3/8 IN., 25/PKG


description:
NO. 50F, ELBOW, FEMALE, I.P.T., 7/64 IN. X 1/8 IN., 25/PKG


description:
NO. 50F, ELBOW, FEMALE, I.P.T., 1/8 IN. X 1/8 IN., 25/PKG


description:
NO. 296-F1, UNION, HALF, FEMALE,  3/8 IN., 25/PKG


description:
NO. 50F, ELBOW, FEMALE, I.P.T., 3/16 IN. X 1/8 IN., 25/PKG


description:
NO. 50FHXD1, ELBOW, FEMALE, I.P.T., 1/4 IN. X 1/8 IN., 25/PKG


description:
NO. 50FHXH1, ELBOW, FEMALE, I.P.T., 1/4 IN. X 1/4 IN., 25/PKG


description:
NO. 50F, ELBOW, FEMALE, I.P.T., 1/4 IN. X 3/8 IN., 25/PKG


description:
NO. 50F, ELBOW, FEMALE, I.P.T., 5/16 IN. X 1/8 IN., 25/PKG


description:
NO. 50F, ELBOW, FEMALE, I.P.T., 5/16 IN. X 3/8 IN., 25/PKG


description:
NO. 50F, ELBOW, FEMALE, I.P.T., 5/16 IN. X 1/2 IN., 25/PKG


description:
NO. 50F, ELBOW, FEMALE, I.P.T., 3/8 IN. X 1/4 IN., 25/PKG


description:
NO. 50F, ELBOW, FEMALE, I.P.T., 3/8 IN. X 7/16 IN., 25/PKG


description:
NO. 41FFSL1, NUT, UNION, SHORT FORGED, 3/8 IN., 25/PKG


description:
NO. 50F, ELBOW, FEMALE, I.P.T., 7/16 IN. X 1/2 IN., 25/PKG


description:
NO. 41FFSP1, NUT, UNION, SHORT FORGED, 1/2 IN., 25/PKG


description:
NO. 41FFST1, NUT, UNION, SHORT FORGED, 5/8 IN., 25/PKG


description:
NO. 41FFH1, NUT, UNION, LONG FORGED, 1/4 IN., 25/PKG


description:
NO. 50F, ELBOW, FEMALE, I.P.T., 1/2 IN. X 3/8 IN., 25/PKG


description:
NO. 41FH1, NUT, BRASS, LONG, 1/4 IN., 25/PKG


description:
NO. 41FJ1, NUT, BRASS, LONG, 5/16 IN., 25/PKG


description:
NO. 41FL1, NUT, BRASS, LONG, 3/8 IN., 25/PKG


description:
NO. 49F, ELBOW, MALE, I.P.T., 7/64 IN. X 1/8 IN., 25/PKG


description:
NO. 41FP1, NUT, BRASS, LONG, 1/2 IN., 25/PKG


description:
NO. 49F, ELBOW, MALE, I.P.T., 3/16 IN. X 1/8 IN., 25/PKG


description:
NO. 41FT1, NUT, BRASS, LONG, 5/8 IN., 25/PKG


description:
NO. 49F, ELBOW, MALE, I.P.T., 7/32 IN. X 1/8 IN., 25/PKG


description:
NO. 41FSF1, NUT, BRASS, SHORT, 3/16 IN., 25/PKG


description:
NO. 49FHXD1, ELBOW, MALE, I.P.T., 1/4 IN. X 1/8 IN., 25/PKG


description:
NO. 41FSH1, NUT, BRASS, SHORT, 1/4 IN., 25/PKG


description:
NO. 49FHXH1, ELBOW, MALE, I.P.T., 1/4 IN. X 1/4 IN., 25/PKG


description:
NO. 49FHXL1, ELBOW, MALE, I.P.T., 1/4 IN. X 3/8 IN., 25/PKG


description:
NO. 41FSJ1, NUT, BRASS, SHORT, 5/16 IN., 25/PKG


description:
NO. 49F, ELBOW, MALE, I.P.T., 1/4 IN. X 1/2 IN., 25/PKG


description:
NO. 41FSL1, NUT, BRASS, SHORT, 3/8 IN., 25/PKG


description:
NO. 41FSP1, NUT, BRASS, SHORT, 1/2 IN., 25/PKG


description:
NO. 49FJXH1, ELBOW, MALE, I.P.T., 5/16 IN. X 1/4 IN., 25/PKG


description:
NO. 41FST1, NUT, BRASS, SHORT, 5/8 IN., 25/PKG


description:
NO. 41FCH1, CAP, BRASS, S.A.E., 1/4 IN., 25/PKG


description:
NO. 49FLXD1, ELBOW, MALE, I.P.T., 3/8 IN. X 1/8 IN., 25/PKG


description:
NO. 41FCL1, CAP, BRASS, S.A.E., 3/8 IN., 25/PKG


description:
NO. 49FLXH1, ELBOW, MALE, I.P.T., 3/8 IN. X 1/4 IN., 25/PKG


description:
NO. 49FLXL1, ELBOW, MALE, I.P.T., 3/8 IN. X 3/8 IN., 25/PKG


description:
NO. 49FLXP1, ELBOW, MALE, I.P.T., 3/8 IN. X 1/2 IN., 25/PKG


description:
NO. 49F, ELBOW, MALE, I.P.T., 7/16 IN. X 3/8 IN., 25/PKG


description:
NO. 49FPXP1, ELBOW, MALE, I.P.T., 1/2 IN. X 1/2 IN., 25/PKG


description:
NO. 55F, ELBOW, DOUBLE TUBE END, 1/8 IN., 25/PKG


description:
NO. 42FH1, UNION, FULL, BRASS, 1/4 IN., 25/PKG


description:
NO. 55F, ELBOW, DOUBLE TUBE END, 3/16 IN., 25/PKG


description:
NO. 55F, ELBOW, DOUBLE TUBE END, 1/4 IN., 25/PKG


description:
NO. 42FJ1, UNION, FULL, BRASS, 5/16 IN., 25/PKG


description:
NO. 55F, ELBOW, DOUBLE TUBE END, 5/16 IN., 25/PKG


description:
NO. 42FL1, UNION, FULL, BRASS, 3/8 IN., 25/PKG


description:
NO. 55F, ELBOW, DOUBLE TUBE END, 3/8 IN., 25/PKG


description:
NO. 42FP1, UNION, FULL, BRASS, 1/2 IN., 25/PKG


description:
NO. 42FRLXH1, UNION, REDUCING, BRASS, 3/8 IN. X 1/4 IN., 25/PKG


description:
NO. 44FH1, TEE, TUBE, 3 TUBE ENDS, 1/4 IN., 25/PKG


description:
NO. 44FL1, TEE, TUBE, 3 TUBE ENDS, 3/8 IN., 25/PKG


description:
NO. 44FP1, TEE, TUBE, 2 TUBE ENDS, 1/2 IN., 25/PKG


description:
NO. 41F, NUT, LONG, 5/8 IN. X 5/8 IN., 25/PKG


description:
NO. 44FT1, TEE, TUBE, 3 TUBE ENDS, 5/8 IN., 25/PKG


description:
NO. 41F, NUT, LONG, 7/8 IN. X 3/4 IN., 25/PKG


description:
NO. 41FSF1, NUT, SHORT, 3/16 IN., 25/PKG


description:
NO. 41FSJ1, NUT, SHORT, 5/16 IN., 25/PKG


description:
NO. 46FHXD1, UNION, HALF, FEMALE, BRASS, 1/4 IN. X 1/8 IN., 25/PKG


description:
NO. 46FHXH1, UNION, HALF, FEMALE, BRASS, 1/4 IN. X 1/4 IN., 25/PKG


description:
NO. 46FHXL1, UNION, HALF, FEMALE, BRASS, 1/4 IN. X 3/8 IN., 25/PKG


description:
NO. 46FLXL1, UNION, HALF, FEMALE, BRASS, 3/8 IN. X 3/8 IN., 25/PKG


description:
NO. 46FLXP1, UNION, HALF, FEMALE, BRASS, 3/8 IN. X 1/2 IN., 25/PKG


description:
NO. 46FPXL1, UNION, HALF, FEMALE, BRASS, 1/2 IN. X 3/8 IN., 25/PKG


description:
NO. 46FPXP1, UNION, HALF, FEMALE, BRASS, 1/2 IN. X 1/2 IN., 25/PKG


description:
NO. 44F, TEE, TUBE, 3 TUBE ENDS, 1/16 IN., 25/PKG


description:
NO. 44F, TEE, TUBE, 3 TUBE ENDS, 3/32 IN., 25/PKG


description:
NO. 48FFXD1, UNION, HALF, MALE, BRASS, 3/16 IN. X 1/8 IN., 25/PKG


description:
NO. 44F, TEE, TUBE, 3 TUBE ENDS, 1/8 IN., 25/PKG


description:
NO. 44F, TEE, TUBE, 3 TUBE ENDS, 3/16 IN., 25/PKG


description:
NO. 48FHXD1, UNION, HALF, MALE, BRASS, 1/4 IN. X 1/8 IN., 25/PKG


description:
NO. 48FHXH1, UNION, HALF, MALE, BRASS, 1/4 IN. X 1/4 IN., 25/PKG


description:
NO. 48FHXL1, UNION, HALF, MALE, BRASS, 1/4 IN. X 3/8 IN., 25/PKG


description:
NO. 48FHXP1, UNION, HALF, MALE, BRASS, 1/4 IN. X 1/2 IN., 25/PKG


description:
NO. 44F, TEE, TUBE, 3 TUBE ENDS, 5/16 IN., 25/PKG


description:
NO. 44FL1, TEE, TUBE, 3 TUBE ENDS,  3/8 IN., 25/PKG


description:
NO. 48FJXH1, UNION, HALF, MALE, BRASS, 5/16 IN. X 1/4 IN., 25/PKG


description:
NO. 44FP1, TEE, TUBE, 3 TUBE ENDS, 1/2 IN., 25/PKG


description:
NO. 48FJXL1, UNION, HALF, MALE, BRASS, 5/16 IN. X 3/8 IN., 25/PKG


description:
NO. 48FLXD1, UNION, HALF, MALE, BRASS, 3/8 IN. X 1/8 IN., 25/PKG


description:
NO. 48FLXH1, UNION, HALF, MALE, BRASS, 3/8 IN. X 1/4 IN., 25/PKG


description:
NO. 45F, TEE, TUBE, I.P.T. ON BRANCH, 7/64 IN. X 1/8 IN., 25/PKG


description:
NO. 48FLXP1, UNION, HALF, MALE, BRASS, 3/8 IN. X 1/2 IN., 25/PKG


description:
NO. 45F, TEE, TUBE, I.P.T. ON BRANCH, 3/16 IN. X 1/8 IN., 25/PKG


description:
NO. 45F, TEE, TUBE, I.P.T. ON BRANCH, 7/32 IN. X 1/8 IN., 25/PKG


description:
NO. 48FLXL1, UNION, HALF, MALE, BRASS, 3/8 IN. X 3/8 IN., 25/PKG


description:
NO. 45F, TEE, TUBE, I.P.T. ON BRANCH, 1/4 IN. X 1/8 IN., 25/PKG


description:
NO. 45F, TEE, TUBE, I.P.T. ON BRANCH, 1/4 IN. X 1/4 IN., 25/PKG


description:
NO. 48FPXL1, UNION, HALF, MALE, BRASS, 1/2 IN. X 3/8 IN., 25/PKG


description:
NO. 48FPXP1, UNION, HALF, MALE, BRASS, 1/2 IN. X 1/2 IN., 25/PKG


description:
NO. 45F, TEE, TUBE, I.P.T. ON BRANCH, 5/16 IN. X 1/8 IN., 25/PKG


description:
NO. 48FTXP1, UNION, HALF, MALE, BRASS, 5/8 IN. X 1/2 IN., 25/PKG


description:
NO. 45F, TEE, TUBE, I.P.T. ON BRANCH, 3/8 IN. X 1/4 IN., 25/PKG


description:
NO. 45F, TEE, TUBE, I.P.T. ON BRANCH, 3/8 IN. X 3/8 IN., 25/PKG


description:
NO. 45F, TEE, TUBE, I.P.T. ON BRANCH, 5/8 IN. X 1/2 IN., 25/PKG


description:
NO. 51F, TEE, TUBE, I.P.T. ON END, 7/64 IN. X 1/8 IN., 25/PKG


description:
NO. 51F, TEE, TUBE, I.P.T. ON END, 3/16 IN. X 1/8 IN., 25/PKG


description:
NO. 51F, TEE, TUBE, I.P.T. ON END, 7/32 IN. X 1/8 IN., 25/PKG


description:
NO. 51F, TEE, TUBE, I.P.T. ON END, 1/4 IN. X 1/8 IN., 25/PKG


description:
NO. 51F, TEE, TUBE, I.P.T. ON END, 1/4 IN. X 1/4 IN., 25/PKG


description:
NO. 51F, TEE, TUBE, I.P.T. ON END, 5/16 IN. X 1/8 IN., 25/PKG


description:
NO. 51F, TEE, TUBE, I.P.T. ON END, 3/8 IN. X 7/16 IN., 25/PKG


description:
NO. 51F, TEE, TUBE, I.P.T. ON END, 1/2 IN. X 1/2 IN., 25/PKG


description:
NO. 49FJXD1, ELBOW, MALE, I.P.T., 5/16 IN. X 1/8 IN., 25/PKG


description:
NO. 46F, UNION, HALF, FEMALE, 7/64 IN. X 1/8 IN., 25/PKG


description:
NO. 46F, UNION, HALF, FEMALE, 1/8 IN., 25/PKG


description:
NO. 46F, UNION, HALF, FEMALE,  1/8 IN. X 1/8 IN., 25/PKG


description:
NO. 46F, UNION, HALF, FEMALE, 3/16 IN., 25/PKG


description:
NO. 46F, UNION, HALF, FEMALE, 3/16 IN. X 1/8 IN., 25/PKG


description:
NO. 46F, UNION, HALF, FEMALE, 1/4 IN., 25/PKG


description:
NO. 46FHXD1, UNION, HALF, FEMALE, 1/4 IN. X 1/8 IN., 25/PKG


description:
NO. 46F, UNION, HALF, FEMALE,  1/4 IN. X 1/2 IN., 25/PKG


description:
NO. 46F, UNION, HALF, FEMALE, 5/16 IN. X 1/8 IN., 25/PKG


description:
NO. 46F, UNION, HALF, FEMALE, 5/16 IN. X 1/4 IN., 25/PKG


description:
NO. 46F, UNION, HALF, FEMALE, 5/16 IN. X 5/16 IN., 25/PKG


description:
NO. 46F, UNION, HALF, FEMALE, 3/8 IN., 25/PKG


description:
NO. 50FJXH1, ELBOW, FEMALE, I.P.T., 5/16 IN. X 1/4 IN., 25/PKG


description:
NO. 46F, UNION, HALF, FEMALE, 3/8 IN. X 1/8 IN., 25/PKG


description:
NO. 46F, UNION, HALF, FEMALE, 3/8 IN. X 1/4 IN., 25/PKG


description:
NO. 50FLXL1, ELBOW, FEMALE, I.P.T., 3/8 IN. X 3/8 IN., 25/PKG


description:
NO. 46FLXL1, UNION, HALF, FEMALE, 3/8 IN. X 3/8 IN., 25/PKG


description:
NO. 50FLXP1, ELBOW, FEMALE, I.P.T., 3/8 IN. X 1/2 IN., 25/PKG


description:
NO. 46FLXP1, UNION, HALF, FEMALE, 3/8 IN. X 1/2 IN., 25/PKG


description:
NO. 50FPXP1, ELBOW, FEMALE, I.P.T., 1/2 IN. X 1/2 IN., 25/PKG


description:
NO. 46FPXL1, UNION, HALF, FEMALE,  1/2 IN. X 3/8 IN., 25/PKG


description:
NO. 46FPXP1, UNION, HALF, FEMALE, 1/2 IN. X 1/2 IN., 25/PKG


description:
NO. 48F, UNION, HALF, MALE, 1/8 IN. X 1/8 IN., 25/PKG


description:
NO. PFL1, PLUG, FLARE, SAE, 3/8 IN., 25/PKG


description:
NO. 48FFXD1, UNION, HALF, MALE,  3/16 IN. X 1/8 IN., 25/PKG


description:
NO. 48F, UNION, HALF, MALE, 3/16 IN. X 1/4 IN., 25/PKG


description:
NO. PFP1, PLUG, FLARE, SAE, 1/2 IN., 25/PKG


description:
NO. 48FHXD1, UNION, HALF, MALE, 1/4 IN. X 1/8 IN., 25/PKG


description:
NO. 48FHXH1, UNION, HALF, MALE, 1/4 IN. X 1/4 IN., 25/PKG


description:
NO. 48FHXL1, UNION, HALF, MALE, 1/4 IN. X 3/8 IN., 25/PKG


description:
NO. 48FHXP1, UNION, HALF, MALE,  1/4 IN. X 1/2 IN., 25/PKG


description:
NO. 48F, UNION, HALF, MALE, 5/16 IN. X 1/8 IN., 25/PKG


description:
NO. 48FJXH1, UNION, HALF, MALE, 5/16 IN. X 1/4 IN., 25/PKG


description:
NO. 48FJXL1, UNION, HALF, MALE, 5/16 IN. X 3/8 IN., 25/PKG


description:
NO. 48FLXD1, UNION, HALF, MALE,  3/8 IN. X 1/8 IN., 25/PKG


description:
NO. 48FLXH1, UNION, HALF, MALE, 3/8 IN. X 1/4 IN., 25/PKG


description:
NO. 48FLXL1, UNION, HALF, MALE, 3/8 IN. X 3/8 IN., 25/PKG


description:
NO. 48FLXP1, UNION, HALF, MALE, 3/8 IN. X 1/2 IN., 25/PKG


description:
NO. 48F, UNION, HALF, MALE, 7/16 IN. X 1/2 IN., 25/PKG


description:
NO. 48FTXP1, UNION, HALF, MALE, 5/8 IN. X 1/2 IN., 25/PKG


description:
NO. 48F, UNION. HALF, MALE, 1/2 IN. X 1/4 IN., 25/PKG


description:
NO. 48FPXL1, UNION, HALF, MALE, 1/2 IN. X 3/8 IN., 25/PKG


description:
NO. 48FPXP1, UNION, HALF, MALE, 1/2 IN. X 1/2 IN., 25/PKG


description:
NO. US461, CONNECTOR, FLARE, SWIVEL 3/8 IN., 25/PKG


description:
NO. 48F, UNION, HALF, MALE, 1/2 IN. X 3/4 IN., 25/PKG


description:
NO. US481, CONNECTOR, FLARE, SWIVEL, 1/2 IN., 25/PKG


description:
NO. 42FJ1, UNION, FULL, 5/16 IN., 25/PKG


description:
NO. 42FRLXH1, UNION, REDUCING, 3/8 IN. X 1/4 IN., 25/PKG


description:
NO. 42FR, UNION, REDUCING, 3/8 IN. X 5/16 IN., 25/PKG


description:
FITTINGS, BRASS, FLARED TYPE - BRAND LISTED OR EQUAL


description:
ADAPTER, F TO M PIPE, 1/4 IN. X 1/8 IN.  -  25/PKG.


description:
ADAPTER, F TO M PIPE, 1/4 IN. X 1/4 IN. -  25/PKG.


description:
BALL CHECK, 45 DEG. FLARE, 3/16 IN. X 1/8 IN. M , NO. 43F  -  25/PKG.


description:
BALL CHECK, 45 DEG. FLARE,  1/4 IN. X 1/8 IN. M,  NO. 43F  -  25/PKG.


description:
BALL CHECK, 45 DEG. FLARE,  5/16 IN. X 1/8 IN. M, NO. 43F  -  25/PKG.


description:
BALL CHECK, 45 DEG. FLARE,  1/2 IN. X 3/8 IN. M, NO. 43F  -  25/PKG.


description:
CONNECTOR, FEMALE, SAE W/NUT AND SLEEVE,  3/16 IN. X 1/8 IN.  - 25/PKG.


description:
CONNECTOR, MALE, 37 DEG. FLARE,  3/8 IN. x 1/4 IN. , NO. 848FB  -  25/PKG.


description:
CONNECTOR, MALE, 45 DEG. FLARE,  1/8 IN. x 1/8 IN. , NO. 648F  -  25/PKG.


description:
CONNECTOR, MALE, 45 DEG. FLARE,  3/16 IN. x 1/8 IN. , NO. 648F  -  25/PKG.


description:
CONNECTOR, MALE, 45 DEG. FLARE,  1/4 IN. x 1/8 IN. , NO. 648F  -  25/PKG.


description:
CONNECTOR, MALE, 45 DEG. FLARE,  1/4 IN. x 1/4 IN. , NO. 648F  -  25/PKG.


description:
CONNECTOR, MALE, 45 DEG. FLARE,  1/4 IN. x 3/8 IN. , NO. 648F  -  25/PKG.


description:
CONNECTOR, MALE, 45 DEG. FLARE,  5/16 IN. x 1/8 IN. , NO. 648F  -  25/PKG.


description:
CONNECTOR, MALE, 45 DEG. FLARE,  5/16 IN. x 1/4 IN. , NO. 648F  -  25/PKG.


description:
CONNECTOR, MALE,  45 DEG. FLARE,  3/8 IN. x 1/8 IN. , NO. 648F  -  25/PKG.


description:
CONNECTOR, MALE, 45 DEG. FLARE,  3/8 IN. x 1/4 IN. , NO. 648F  -  25/PKG.


description:
CONNECTOR, MALE, 45 DEG. FLARE,  3/8 IN. x 3/8 IN. , NO. 648F  -  25/PKG.


description:
CONNECTOR, MALE, 45 DEG. FLARE,   3/8 IN. x 1/2 IN. , NO. 648F  -  25/PKG.


description:
CONNECTOR, MALE, 45 DEG. FLARE,  1/2 IN. x 1/4 IN. , NO. 648F  -  25/PKG.


description:
CONNECTOR, MALE, 45 DEG. FLARE,  1/2 IN. x 3/8 IN. , NO. 648F  -  25/PKG.


description:
CONNECTOR, MALE, 45 DEG. FLARE,  1/2 IN. x 1/2 IN. , NO. 648F  -  25/PKG.


description:
CONNECTOR, MALE, 45 DEG. FLARE,  1/2 IN. x 3/4 IN. , NO. 648F  -  25/PKG.


description:
CONNECTOR, MALE, 45 DEG. FLARE,  5/8 IN. x 3/8 IN. , NO. 648F  -  25/PKG.


description:
CONNECTOR, MALE, 45 DEG. FLARE,  5/8 IN. x 1/2 IN. , NO. 648F  -  25/PKG.


description:
CONNECTOR, MALE, 45 DEG. FLARE,  5/8 IN. x 3/4 IN. , NO. 648F  -  25/PKG.


description:
CONNECTOR, MALE, 45 DEG. FLARE,  3/4 IN. x 1/2 IN. , NO. 648F  -  25/PKG.


description:
CONNECTOR, MALE, 45 DEG. FLARE,  3/4 IN. x 3/4 IN. , NO. 648F  -  25/PKG.


description:
COUPLING, FEMALE,  3/16 IN. X 1/8 IN.  - 25/PKG.


description:
COUPLING, FEMALE, 45 DEG. FLARE,  3/16 IN. x 1/8 IN.  , NO. 46F - 25/PKG.


description:
COUPLING, FEMALE, 45 DEG. FLARE,  1/4 IN. x 1/8 IN. , NO. 46F - 25/PKG.


description:
COUPLING,  1/4 IN. X 3/16 IN.  - 25/PKG.


description:
COUPLING, FEMALE, 45 DEG. FLARE, 1/4 IN. X 1/4 IN., NO. 646F - 25/PKG.


description:
COUPLING, FEMALE, 45 DEG. FLARE, 5/16 IN. X 1/8 IN.,  NO. 46F - 25/PKG.


description:
COUPLING, FEMALE, 45 DEG. FLARE, 5/16 IN. X 1/4 IN.,  NO. 46F  -  25/PKG.


description:
COUPLING, FEMALE, 45 DEG. FLARE, 3/8 IN. X 1/8 IN.,  NO. 46F  -  25/PKG.


description:
COUPLING, FEMALE, 45 DEG. FLARE, 3/8 IN. X 1/4 IN.,  NO. 46F  -  25/PKG.


description:
COUPLING, FEMALE, 45 DEG. FLARE, 3/8 IN. X 1/2 IN.,  NO. 46F  -  25/PKG.


description:
COUPLING, FEMALE, 45 DEG. FLARE, 1/2 IN. X 3/8 IN.,  NO. 46F  -  25/PKG.


description:
COUPLING, FEMALE, 45 DEG. FLARE, 1/2 IN. X 1/2 IN.,  NO. 46F  -  25/PKG.


description:
COUPLING, FEMALE, 45 DEG. FLARE, 5/8 IN. X 3/8 IN.,  NO. 46F  -  25/PKG.


description:
COUPLING, FEMALE, 45 DEG. FLARE, 5/8 IN. X 1/2 IN.,  NO. 46F  -  25/PKG.


description:
COUPLING, FEMALE, 45 DEG. FLARE, 5/8 IN. X 3/4 IN.,  NO. 46F  -  25/PKG.


description:
COUPLING, FEMALE, 45 DEG. FLARE, 3/4 IN. X 1/2 IN.,  NO. 46F  -  25/PKG.


description:
ELBOW, PIPE, 90 DEG., 1/8 IN. X 5/16 IN.  -25/PKG.


description:
ELBOW, PIPE, 90 DEG., 1/2 IN. M X 1/2 IN. F  - 25/PKG.


description:
ELBOW, FEMALE, 90 DEG., 1/8 IN. MPT X 3/16 IN.  - 25/PKG.


description:
ELBOW, FEMALE, 90 DEG., 1/8 IN. X 1/4 IN. -  25/PKG.


description:
ELBOW, FEMALE, 90 DEG., 1/8 IN. MPT X 5/16 IN.,  - 25/PKG.


description:
ELBOW, FEMALE, 90 DEG., 5/16 IN. X 1/4 IN.   - 25/PKG.


description:
ELBOW, FEMALE, 90 DEG., 3/8 IN. X 1/4 IN.   - 25/PKG.


description:
ELBOW, FEMALE, I.P.T., 90 DEG., 3/8 IN. X 1/4 IN., NO. B-50 - 25/PKG.


description:
ELBOW, FEMALE, 90 DEG., 3/8 IN. X 3/8 IN., NO. B-50 - 25/PKG.


description:
ELBOW, FEMALE, 90 DEG., 3/8 IN. X 1/2 IN., NO. B-50 - 25/PKG.


description:
ELBOW, MALE, 45 DEG. FLARE, 1/8 IN. X 1/8 IN.,  NO. 649F -  25/PKG.


description:
ELBOW, MALE, 90 DEG., 1/8 IN. X 1/4 IN. -  25/PKG.


description:
ELBOW, MALE, 45 DEG. FLARE, 3/16 IN. X 1/8 IN., NO. 649F -  25/PKG.


description:
ELBOW, MALE, 45 DEG. FLARE, 1/4 IN. X 1/8 IN.,  NO. 649F -  25/PKG.


description:
ELBOW, MALE, 90 DEG., 1/4 IN. X 1/8 IN.  - 25/PKG.


description:
ELBOW, MALE, 1/4 IN. X 1/8 IN., NO. B-49 - 25/PKG.


description:
ELBOW, MALE, 45 DEG. FLARE, 1/4 IN. X 1/4 IN.,  NO. 649F -  25/PKG.


description:
ELBOW, MALE, 90 DEG.,1/4 IN. X 1/4 IN.  - 25/PKG.


description:
ELBOW, MALE, 45 DEG. FLARE, 1/4 IN. X 3/8 IN.,  NO. 649F -  25/PKG.


description:
ELBOW, MALE, 45 DEG. FLARE, 5/16 IN. X 1/8 IN., NO. 649F -  25/PKG.


description:
ELBOW, MALE, 45 DEG. FLARE, 5/16 IN. X 1/4 IN., NO. 649F -  25/PKG.


description:
ELBOW, MALE, 90 DEG., 5/16 IN. X 1/4 IN.   - 25/PKG.


description:
ELBOW, MALE, SAE, 90 DEG.,  5/16 IN. O.D. X 5/16 IN. O.D.  - 25/PKG.


description:
ELBOW, MALE, 45 DEG. FLARE, 3/8 IN. X 1/8 IN.,  NO. 649F -  25/PKG.


description:
ELBOW, MALE, 90 DEG., 3/8 IN. X 1/8 IN.  - 25/PKG.


description:
ELBOW, MALE, 45 DEG. FLARE, 3/8 IN. X 1/4 IN.,  NO. 649F -  25/PKG.


description:
ELBOW, 45 DEG., MALE, 45 DEG. FLARE, 3/8 IN. X 1/4 IN., NO. 54F  -  25/PKG.


description:
ELBOW, MALE, 45 DEG. FLARE, 3/8 IN. X 3/8 IN.,  NO. 649F -  25/PKG.


description:
ELBOW, MALE, 90 DEG., 3/8 IN. X 3/8 IN.  - 25/PKG.


description:
ELBOW, MALE, 45 DEG. FLARE, 3/8 IN. X 1/2 IN.,  NO. 649F -  25/PKG.


description:
ELBOW, MALE, 45 DEG. FLARE, 3/8 IN. X 3/4 IN.,  NO. 649F -  25/PKG.


description:
ELBOW, MALE, 45 DEG. FLARE, 1/2 IN. X 1/4 IN.,  NO. 649F -  25/PKG.


description:
ELBOW, MALE, 45 DEG. FLARE, 1/2 IN. X 3/8 IN.,  NO. 649F -  25/PKG.


description:
ELBOW, MALE, 45 DEG. FLARE, 1/2 IN. X 1/2 IN.,  NO. 649F -  25/PKG.


description:
ELBOW, MALE, 45 DEG. FLARE, 1/2 IN. X 3/4 IN.,  NO. 649F -  25/PKG.


description:
ELBOW, MALE, 45 DEG. FLARE, 5/8 IN. X 1/2 IN.,  NO. 649F -  25/PKG.


description:
ELBOW, MALE, 45 DEG. FLARE, 5/8 IN. X 3/4 IN.,  NO. 649F -  25/PKG.


description:
ELBOW, MALE, 45 DEG. FLARE, 3/4 IN. X 1/2 IN.,  NO. 649F -  25/PKG.


description:
ELBOW, MALE, 45 DEG. FLARE, 3/4 IN. X 3/4 IN.,  NO. 649F -  25/PKG.


description:
ELBOW, UNION, 45 DEG. FLARE, 1/4 IN.,  NO. 655F -  25/PKG.


description:
ELBOW, UNION, 45 DEG. FLARE, 5/16 IN.,  NO. 655F -  25/PKG.


description:
ELBOW, UNION, 45 DEG. FLARE, 3/8 IN.,  NO. 655F -  25/PKG.


description:
ELBOW, UNION, 45 DEG. FLARE, 1/2 IN.,  NO. 655F -  25/PKG.


description:
ELBOW, UNION, 45 DEG. FLARE, 5/8 IN.,  NO. 655F -  25/PKG.


description:
ELBOW, UNION, 45 DEG. FLARE, 3/4 IN.,  NO. 655F -  25/PKG.


description:
NUT, UNION, SHORT, 45 DEG. FLARE, 1/4 IN.,  NO. 41FS -  25/PKG.


description:
NUT, UNION, SHORT, 45 DEG. FLARE, 5/16 IN.,  NO. 41FS -  25/PKG.


description:
NUT, UNION, SHORT, 45 DEG. FLARE, 3/8 IN.,  NO. 41FS -  25/PKG.


description:
NUT, UNION, SHORT, 45 DEG. FLARE, 1/2 IN.,  NO. 41FS -  25/PKG.


description:
NUT, UNION, STD. 45 DEG. FLARE, 1/8 IN.,  NO. 41F -  25/PKG.


description:
NUT, UNION, STD. 45 DEG. FLARE, 3/16 IN.,  NO. 41F -  25/PKG.


description:
NUT, UNION, STD. 45 DEG. FLARE, 1/4 IN.,  NO. 41F -  25/PKG.


description:
NUT, UNION, STD. 45 DEG. FLARE, 5/16 IN.,  NO. 41F -  25/PKG.


description:
NUT, UNION, STD. 45 DEG. FLARE, 3/8 IN.,  NO. 41F -  25/PKG.


description:
NUT, UNION, STD. 45 DEG. FLARE, 1/2 IN.,  NO. 41F -  25/PKG.


description:
NUT, UNION, STD. 45 DEG. FLARE, 5/8 IN.,  NO. 41F -  25/PKG.


description:
NUT, UNION, STD. 45 DEG. FLARE, 3/4 IN.,  NO. 41F -  25/PKG.


description:
REDUCER, MALE TO FEMALE, 5/16 IN. X 1/4 IN.  - 25/PKG.


description:
REDUCER, MALE TO FEMALE, 3/8 IN. X 1/2 IN.  - 25/PKG.


description:
SLEEVE, COUPLING, 1 IN. X 1-3/4 IN.  - 25/PKG.


description:
SLEEVE, COUPLING, 1-1/4 IN. X 1-3/4 IN.  - 25/PKG.


description:
TEE, MPT, 1/4 IN. FC X 1/8 IN. P X 1/4 IN. FC  - 25/PKG.


description:
TEE, MPT, 5/16 IN. FC X 1/8 IN. P X 5/16 IN. FC  - 25/PKG.


description:
TEE, 3/8 IN. FC X 1/4 IN. P X 3/8 IN. FC  - 25/PKG.


description:
TEE, MALE BRANCH, 45 DEG. FLARE, 3/16 IN. X 1/8 IN.,  NO. 645F  -  25/PKG.


description:
TEE, MALE BRANCH, 45 DEG. FLARE, 1/4 IN. X 1/8 IN.,  NO. 645F  -  25/PKG.


description:
TEE, MALE BRANCH, 45 DEG. FLARE, 1/4 IN. X 1/4 IN.,  NO. 645F  -  25/PKG.


description:
TEE, MALE BRANCH, 45 DEG. FLARE, 5/16 IN. X 1/8 IN.,  NO. 645F  -  25/PKG.


description:
TEE, MALE BRANCH, 45 DEG. FLARE, 3/8 IN. X 1/4 IN.,  NO. 645F  -  25/PKG.


description:
TEE, MALE BRANCH, 45 DEG. FLARE, 3/8 IN. X 3/8 IN.,  NO. 645F  -  25/PKG.


description:
TEE, MALE BRANCH, 45 DEG. FLARE, 1/2 IN. X 3/8 IN.,  NO. 645F  -  25/PKG.


description:
TEE, MALE BRANCH, 45 DEG. FLARE, 1/2 IN. X 1/2 IN.,  NO. 645F  -  25/PKG.


description:
TEE, MALE BRANCH, 45 DEG. FLARE, 5/8 IN. X 1/2 IN.,  NO. 645F  -  25/PKG.


description:
TEE, MALE BRANCH, 45 DEG. FLARE, 3/4 IN. X 1/2 IN.,  NO. 645F  -  25/PKG.


description:
TEE, UNION, 45 DEG. FLARE, 1/8 IN.,  NO. 44F  -  25/PKG.


description:
TEE, UNION, 45 DEG. FLARE, 3/16 IN.,  NO. 44F  -  25/PKG.


description:
TEE, UNION, 45 DEG. FLARE, 1/4 IN.,  NO. 44F  -  25/PKG.


description:
TEE, UNION, 45 DEG. FLARE, 5/16 IN.,  NO. 44F  -  25/PKG.


description:
TEE, UNION, 45 DEG. FLARE, 3/8 IN.,  NO. 44F  -  25/PKG.


description:
TEE, UNION, 45 DEG. FLARE, 1/2 IN.,  NO. 44F  -  25/PKG.


description:
TEE, UNION, 45 DEG. FLARE, 5/8 IN.,  NO. 44F  -  25/PKG.


description:
TEE, UNION, 45 DEG. FLARE, 3/4 IN.,  NO. 44F  -  25/PKG.


description:
UNION, HALF, FEMALE,  1/4 IN. X 3/16 IN.  - 25/PKG.


description:
UNION, HALF, FEMALE,  5/16 IN. X 1/4 IN.  - 25/PKG.


description:
UNION, 45 DEG. FLARE, 1/8 IN.,  NO. 42F  -  25/PKG.


description:
UNION, 45 DEG. FLARE, 3/16 IN.,  NO. 42F  -  25/PKG.


description:
UNION, 45 DEG. FLARE, 1/4 IN.,  NO. 42F  -  25/PKG.


description:
UNION, 45 DEG. FLARE, 5/16 IN.,  NO. 42F  -  25/PKG.


description:
UNION, 45 DEG. FLARE, 3/8 IN.,  NO. 42F  -  25/PKG.


description:
UNION, 45 DEG. FLARE, 1/2 IN.,  NO. 42F  -  25/PKG.


description:
UNION, 45 DEG. FLARE, 5/8 IN.,  NO. 42F  -  25/PKG.


description:
UNION, 45 DEG. FLARE, 3/4 IN.,  NO. 42F  -  25/PKG.


description:
VLVE, NEEDLE, T 3/8 IN. X M 1/4 IN., STRAIGHT, TEE HANDLE, IMPERIAL NO. 108SAE


description:
VALVE, SHUT-OFF, T 1/4 IN., 2 WAY, STRAIGHT, LEVER HANDLE, IMPERIAL NO. 28SAE


description:
VALVE, SHUT-OFF, T 1/4 IN. X M 1/8 IN., 2 WAY, STRAIGHT, LEVER HANDLE, IMPERIAL NO. 27SAE


description:
VALVE, SHUT-OFF, T 1/4 IN. X M 1/4 IN., 2 WAY, STRAIGHT, LEVER HANDLE, IMPERIAL NO. 227SAE


description:
VALVE, SHUT-OFF, T 5/16 IN., 2 WAY, STRAIGHT, LEVER HANDLE, IMPERIAL NO. 30SAE


description:
VALVE, SHUT-OFF, T 5/16 IN. X M 1/8 IN., 2 WAY, STRAIGHT, LEVER HANDLE, IMPERIAL NO. 29SAE


description:
VALVE, SHUT-OFF, T 5/16 IN. X M 1/4 IN., 2 WAY, STRAIGHT, LEVER HANDLE, IMPERIAL NO. 229SAE


description:
VALVE, SHUT-OFF, T 3/8 IN. X M 1/4 IN., 2 WAY, STRAIGHT, LEVER HANDLE, IMPERIAL NO. 57SAE


description:
VALVE, SHUT-OFF, T 3/8 IN., 2 WAY, STRAIGHT, LEVER HANDLE, IMPERIAL NO. 58SAE


description:
FITTINGS, BRASS, INVERTED FLARE - BRAND LISTED OR EQUAL


description:
CONNECTOR, 1/4 IN. O.D. TUBE SAE THREAD X 1/8 IN. MPT,  NO. 48W-04X02- 25/PKG.


description:
CONNECTOR,  5/16 IN. O.D. TUBE SAE THREAD X 1/8 IN. MPT,  NO. 48W - 25/PKG.


description:
CONNECTOR, FEMALE, 3/16 IN. X 1/8 IN., NO. 46-W - 25/PKG.


description:
CONNECTOR, FEMALE, 1/4 IN. X 1/8 IN.  - 25/PKG.


description:
CONNECTOR, FEMALE, 1/4 IN. X 1/4 IN.,  NO. 46-W - 25/PKG.


description:
CONNECTOR, FEMALE, 5/16 IN. X 1/8 IN.,  NO. 46-W - 25/PKG.


description:
CONNECTOR, FEMALE, 3/8 IN. X 1/8 IN.,  NO. 46-W  - 25/PKG.


description:
CONNECTOR, FEMALE, 3/8 IN. X 1/4 IN.,  NO. 46-W   - 25/PKG.


description:
CONNECTOR, FEMALE, 1/2 IN. X 1/4 IN.,  NO. 46-W  - 25/PKG.


description:
CONNECTOR, FEMALE TUBESIDE,  3/8 IN. PIPE THREAD - 25/PKG.


description:
CONNECTOR, MALE, 3/16 IN. X 1/8 IN., NO. 48W  -  25/PKG.


description:
CONNECTOR, MALE, 1/4 IN. X 1/8 IN.,  NO. 48W  -  25/PKG.


description:
CONNECTOR, MALE, 1/4 IN. X 1/4 IN.,  NO. 48W  -  25/PKG.


description:
CONNECTOR, MALE, 5/16 IN. X 1/8 IN.,  NO. 48W  -  25/PKG.


description:
CONNECTOR, MALE, 5/16 IN. X 1/4 IN.,  NO. 48W  -  25/PKG.


description:
CONNECTOR, MALE, 3/8 IN. X 1/8 IN.,  NO. 48W  -  25/PKG.


description:
CONNECTOR, MALE, 3/8 IN. X 1/4 IN.,  NO. 48W  -  25/PKG.


description:
CONNECTOR, MALE, 3/8 IN. X 3/8 IN.,  NO. 48W  -  25/PKG.


description:
CONNECTOR, MALE, 1/2 IN. X 3/8 IN.,  NO. 48W  -  25/PKG.


description:
CONNECTOR, MALE, I.P.T., 45 DEG.,  1/4 IN. X 1/4 IN.  - 25/PKG.


description:
ELBOW,  3/16 IN. TUBE X 1/8 IN. MPT , WEATHERED NO.402X3 - 25/PKG.


description:
ELBOW,  1/4 IN. TUBE X 1/8 IN. MPT , WEATHERED NO.402X4 - 25/PKG.


description:
ELBOW, 45 DEG., 1/8 IN. M TUBESIDE X 1 IN. PIPE THREAD   - 25/PKG.


description:
ELBOW, 45 DEG., 1/4 IN. X 1/8 IN., WEATHERED NO. 352 X 4 - 25/PKG.


description:
ELBOW, 90 DEG.,  3/16 IN. O.D. SAE FEMALE X 1/8 IN. MPT  - 25/PKG.


description:
ELBOW, 90 DEG.,  1/4 IN. O.D. SAE FEMALE X 1/8 IN. MPT  - 25/PKG.


description:
ELBOW, FEMALE, 45 DEG., 1/4 IN. X 1/4 IN. - 25/PKG.


description:
ELBOW, FEMALE,  3/8 IN. X 1/4 IN.  - 25/PKG.


description:
ELBOW, MALE,  1/8 IN. X 1/8 IN., NO. 49W   -  25/PKG.


description:
ELBOW, MALE,  1/4 IN. X 1/8 IN., NO. 49W   -  25/PKG.


description:
ELBOW, MALE,  1/4 IN. X 1/4 IN., NO. 49W   -  25/PKG.


description:
ELBOW, MALE,  5/16 IN. X 1/8 IN., NO. 49W  - 25/PKG.


description:
ELBOW, MALE,  5/16 IN. X 1/4 IN., NO. 49W   -  25/PKG.


description:
ELBOW, MALE,  3/8 IN. X 1/4 IN., NO. 49W  - 25/PKG.


description:
ELBOW, MALE,  3/8 IN. X 3/8 IN., NO. 49W   -  25/PKG.


description:
ELBOW, MALE,  1/2 IN. X 3/8 IN., NO. 49W   -  25/PKG.


description:
ELBOW, PIPE, FEMALE, 90 DEG., 1/8 IN. X 5/16 IN.  - 25/PKG.


description:
ELBOW, PIPE, FEMALE, 90 DEG., 1/8 IN. X 3/8 IN.  - 25/PKG.


description:
ELBOW, MALE,  5/16 IN. X 1/8 IN., NO. 49W   -  25/PKG.


description:
ELBOW, TUBE, 1/4 IN. X 1/4 IN.  - 25/PKG.


description:
ELBOW, PIPE, FEMALE, 90 DEG., 1/4 IN. X 1/4 IN.  - 25/PKG.


description:
ELBOW, MALE,  3/8 IN. X 1/4 IN., NO. 49W   -  25/PKG.


description:
NUT, PLATED,  1/8 IN., NO. 41W  -  25/PKG.


description:
NUT, PLATED,  3/16 IN., NO. 41W  -  25/PKG.


description:
NUT, PLATED,  1/4 IN., NO. 41W  -  25/PKG.


description:
NUT, PLATED,  5/16 IN., NO. 41W  -  25/PKG.


description:
NUT, PLATED,  3/8 IN.,  NO. 41W  -  25/PKG.


description:
NUT, PLATED,  1/2 IN.,  NO. 41W  -  25/PKG.


description:
TEE,  3/16 IN. FPT X 1/8 IN MPT, NO. B-156 - 25/PKG.


description:
TEE,  3/16 IN. X 1/4 IN. TEE, 3/16 IN. M-THREAD, WEATHERED NO. 7899 - 25/PKG.


description:
TEE,  1/2 IN. X 1/2 IN., 1/2 IN. M-THREAD, WEATHERED NO. 3700X8 - 25/PKG.


description:
TEE,  9/16 IN. X 3/8 IN., 9/16 IN. M-THREAD, WEATHERED NO. 7904 - 25/PKG


description:
FITTINGS, BRASS, FUEL - BRAND LISTED OR EQUAL


description:
FITTINGS, BRASS, THREADED - EASTMAN OR EQUAL


description:
CONNECTOR, SLEEVE, THREADED, 1/4 IN. X 1/8 IN.  - 25/PKG.


description:
CONNECTOR, SLEEVE, THREADED, 3/8 IN. X 1/4 IN.  - 25/PKG.


description:
NUT, HEX, SLEEVE, THREADED, 1/2 IN.  - 25/PKG.


description:
NUT, SLEEVE, THREADED, 1/8 IN.,  NO. 1060 - 25/PKG.


description:
NUT, SLEEVE, THREADED, 3/16 IN.,  NO. 1060 - 25/PKG.


description:
NUT, SLEEVE, THREADED, 1/4 IN.,  NO. 1060 - 25/PKG.


description:
NUT, SLEEVE, THREADED, 5/16 IN.,  NO. 1060 - 25/PKG.


description:
NUT, SLEEVE, THREADED, 3/8 IN.,  NO. 1060 - 25/PKG.


description:
SLEEVE, THREADED, 1/2 IN., NO. 1060 - 25/PKG.


description:
SLEEVE, ELBOW, THREADED, 3/16 IN. X 1/8 IN., NO. 189DFXD1 - 25/PKG.


description:
SLEEVE, ELBOW, THREADED, 1/4 IN. X 1/8 IN., NO. 189DHXD1 - 25/PKG.


description:
SLEEVE, ELBOW, THREADED, 3/8 IN. X 1/4 IN., NO. 189DLXH1 - 25/PKG.


description:
SLEEVE, ELBOW, THREADED, 45 DEG., 3/16 IN. X 1/8 IN., NO. 1023 - 25/PKG.


description:
SLEEVE, ELBOW, THREADED, MALE PIPE THREAD, 3/16 IN. X 1/8 IN., NO. 1081 - 25/PKG


description:
SLEEVE, ELBOW, THREADED, MALE PIPE THREAD, 1/4 IN. X 1/8 IN., NO. 1081 - 25/PKG


description:
SLEEVE, ELBOW, THREADED, MALE PIPE THREAD, 5/16 IN. X 1/8 IN., NO. 1081 - 25/PKG


description:
SLEEVE, ELBOW, THREADED, MALE PIPE THREAD, 3/8 IN. X 1/4 IN., NO. 1081 - 25/PKG


description:
SLEEVE, MALE, THREADED, 1/8 IN. X 1/8 IN., NO. 1001 - 25/PKG.


description:
SLEEVE, MALE, THREADED, 3/16 IN. X 1/8 IN., NO. 1001 - 25/PKG.


description:
SLEEVE, MALE, THREADED, 3/16 IN. X 1/4 IN., NO. 1001 - 25/PKG.


description:
SLEEVE, MALE, THREADED, 5/16 IN. X 1/8 IN., NO. 1001 - 25/PKG


description:
SLEEVE, MALE, THREADED, 3/8 IN. X 1/4 IN., NO. 1001 - 25/PKG.


description:
SLEEVE, MALE, THREADED, 1/2 IN. X 3/8 IN., NO. 1001 - 25/PKG.


description:
SLEEVE, MALE, THREADED,  5/16 IN. FLARE X 3/8 IN. COMP.  - 25/PKG.


description:
SLEEVE, NUT, THREADED, 1/8 IN., NO. 181D1 - 25/PKG.


description:
SLEEVE, NUT, THREADED, 3/16 IN., NO. 181F1 - 25/PKG.


description:
SLEEVE, NUT, THREADED, 1/4 IN., NO. 181H1 - 25/PKG.


description:
SLEEVE, NUT, THREADED, 5/16 IN., NO. 181J1 - 25/PKG.


description:
SLEEVE, NUT, THREADED, 3/8 IN., NO. 181L1 - 25/PKG.


description:
SLEEVE, UNION, DOUBLE END, THREADED, 5/16 IN., NO. 1002 - 25/PKG.


description:
VALVE, SHUT-OFF, F X F, 1/8 IN., 2 WAY, HIGH DUTY, LEVER HANDLE, IMPERIAL NO. 104HD


description:
VALVE, SHUT-OFF, F X M, 1/8 IN., 2 WAY HIGH DUTY, LEVER HANDLE, IMPERIAL NO. 103HD


description:
VALVE, SHUT-OFF, F X F, 1/4 IN., 2 WAY, HIGH DUTY, LEVER HANDLE, IMPERIAL NO. 104HD


description:
VALVE, SHUT-OFF, F X M, 1/4 IN., 2 WAY HIGH DUTY, LEVER HANDLE, IMPERIAL NO. 103HD


description:
VALVE, SHUT-OFF, F X F, 1/4 IN., 3 WAY, HIGH DUTY, LEVER HANDLE, IMPERIAL NO. 108HD


description:
FITTINGS, BRASS, THREADED - BRAND LISTED OR EQUAL


description:
CONNECTOR, MALE, T 1/4 IN. X M 1/8 IN., IMPERIAL NO. 188D


description:
CONNECTOR, SLEEVE,  1/4 IN. TUBE X 1/4 IN. PT.  - 25/PKG.


description:
ELBOW, SLEEVE, 1/8 IN. X 1/8 IN.  -  25/PKG.


description:
ELBOW, SLEEVE, 3/16 IN. X 1/8 IN.  -  25/PKG.


description:
ELBOW, SLEEVE, 5/16 IN. X 1/8 IN.  -  25/PKG.


description:
NUT, HEX, GALV., 1/2 IN. X 1/2 IN. - 25/PKG


description:
NUT,  THREADED SLEEVE, 1/8 IN.   - 25/PKG


description:
SLEEVE, MALE, THREADED,  3/8 IN. O.D. X 1/4 IN. PT  - 25/PKG


description:
VALVE, SHUT-OFF, 1/8 IN., F X M, 2 WAY, STRAIGHT, LEVER HANDLE, IMPERIAL NO. 48E


description:
VALVE, SHUT-OFF, 1/4 IN., F X M, 2 WAY, STRAIGHT, LEVER HANDLE, IMPERIAL NO. 49E


description:
Front End Alignment Parts and Accessories (See 075 for Equipment)


description:
BALL JOINTS (FRONT END) - BRAND LISTED OR EQUAL


description:
7/16 IN. NF-PIVOT STUD, 34 IN. X 2-5/8 IN. BASE, W/ 7/16 IN. FEMALE MT. HOLE, GALV.


description:
1/2 IN. PIVOT STUD-NF, 2-1/2 IN. SQ. BASE W/ 1/2 IN. FEMALE FINE THREAD MT., CHROME


description:
NAPA NO. 260-1111, FOR 1991 CHEVROLET TRUCK, 262V6, 1 TON


description:
NAPA NO. 260-1119, FOR 1991 CHEVROLET TRUCK, 262V6, 1 TON


description:
IDLER ARMS (FRONT END) - BRAND LISTED OR EQUAL


description:
KING PINS (FRONT END) - BRAND LISTED OR EQUAL


description:
KEEPER, PUSH-ON, 7/16 IN. I.D. X 8 IN. O.D. X 1/32 IN. THICK, BLACK STEEL, FOR THROLLE LINKAGE ON IDLER CONTROL ARM


description:
TIE ROD ENDS (FRONT END) - BRAND LISTED OR EQUAL


description:
Fuel System: Carburetors and Kits, Fuel Pumps, Tanks and Caps, etc.


description:
SPRING, 13/16 IN. DIA., 2 IN. COIL LENGTH, 18-1/2 IN. OVERALL LENGTH


description:
SPRING, LINKAGE, PEDAL, 3/8 IN. COIL DIA., 1-3/4 IN. COIL LGTH, 11-1/4 IN. OVERALL LGTH.


description:
CAPS, FUEL/GAS TANK - BRAND LISTED OR EQUAL


description:
GATES NO. 31648, UNIV., VENTED, F/AUX. TANK


description:
BOWL, FILTER, FUEL, GLASS, 3-3/4 IN. O.D., 2-7/8 IN. I.D., HEAT RESISTANT W/ 1/2 IN. BOTTOM HOLE


description:
CARBURETOR, TRUCK, 2 BARREL W/GASKET, 350 V-8 ENGINE, CHEVROLET NO. 12338625 OR EQUAL


description:
CARBURETOR KIT, 6 CYLINDER, GENERAL MOTORS NO. 77-350-GP OR EQUAL


description:
CARBUERETOR KIT, NAPA NO. 2-5743 OR EQUAL


description:
CARBUERETOR KIT, NAPA NO. 2-5058C OR EQUAL


description:
FLOAT, CARB., NON-METALLIC, DUAL ARM, F/ONE BARREL


description:
FLOAT, FOR 1983 CHEVROLET TRUCK, 350V8, 1 TON, NAPA NO. 2-442 OR EQUAL


description:
GASKET, CARBURETOR, FIBERBOARD PAPER, QUADRAJET ROCHESTER 4 BBL


description:
GASKET, CARB. BASE, ASBESTOS, FOR 318 ENGINE W/THROTTLE


description:
GASKET KIT, SIDE ADJ. ASBESTOS, FOR 318 ENGINE W/THROTTLE, 2/KIT


description:
REPAIR KIT, CARB., TRUCK TUNE-UP, MTC NO. CT1278F


description:
REPAIR KIT, CARB., FOR TUNE-UP, MTC NO. CT1303


description:
REPAIR KIT, CARB., FOR L63 SINGLE JET, INCLUDES GASKETS, JETS, SEATS, O-RINGS AND METERING NEEDLE


description:
CABLE, CHOKE, 63 IN. L, 2-3/4 IN. TRAVEL, DASH MOUNT, PUSH-PULL, FORD NO. E6HZ-9700C OR EQUAL


description:
CABLE, CHOKE, 90 IN. LONG, UNIVERSAL PUSH-PULL,  DO-CAP NO. A-90 OR EQUAL


description:
CABLE STOP, BRASS, 3/4 IN. L, WITH 3/16 IN. THREAD BRASS SCREW, FOR CHOKE


description:
CHOKE, PULL-OFF, STANDARD NO. CPA-241 OR EQUAL


description:
CLAMP, 1/2 IN. L X 1/4 IN. I.D. (M-THDS) CYLINDER W/1/8 IN. THREADED SCREW HOLE V/3/16 IN. SLOTTED HD. SCREW 1/4 IN. L


description:
PARTS AND ACCESSORIES, FUEL INJECTOR (BRAND LISTED OR EQUAL)


description:
GASKET, INJECTOR PUMP - FORD NO. C5NE-9F598A


description:
SPRING, INJECTOR LINKAGE - FORD NO. C5NN-9737G


description:
BOWL, FUEL SEDIMENT, GLASS, 2 IN. DIA. X 2-3/8 IN. D, W/SHUT-OFF VALVE, 5/8IN. INLET DIA., 3/8 IN. I.D. OUTLET


description:
CABLE, T-LOCK, 1/4 IN. X 10 FT., W/LOCKING T-HANDLE


description:
CABLE, THROTTLE - CABLE CRAFT NO. 173LGG-2-120


description:
O-RING, FUEL FILTER, FOR JOHN DEERE EQUIP W/7.2 LITER ENGINE


description:
SOLENOID ASSY., FUEL, 12 VOLT, 3 IN. L, 2-1/4 IN. DIA., 4-BOLT MT., W/O GASKET, FORD NO. E7HZ-9D278A OR EQUAL.


description:
SOLENOID ASSY., FUEL SHUT-OFF, 6 IN. SHAFT, 12-1/2 IN. 3 PRONG PIGTAIL, 12 VOLT, 4 BOLT PATTERN, FORD NO. F3HZ-9A594A OR EQUAL


description:
SPRING, GOVERNOR (DIESEL), CHEV. NO. 5172499


description:
SPRING, THROTTLE (DIESEL), CHEV. NO. 5196098


description:
SPROCKET, IDLER, STEEL, BLACK, W/BRASS BUSHING AND 3/8 IN. I.D. BOLT, MARTIN NO. 50BS9 OR EQUAL


description:
SWITCH, IGNITION, BORG WARNER NO. CS79 OR EQUAL


description:
VALVE, MODULATOR - DELCO REMY NO. D-1906


description:
AIRTEX NO. E80125, 1-7/8 IN. DIA. X 5 IN. L, 3/8 IN. INLET AND OUTLET, 2 WIRE PIGTAIL, MTG. HDWE.


description:
BRW NO. EP10S, ELECTRIC, 12 VOLT, IN-LINE


description:
AMERICAN BOSCH, DIESEL, CARTER NO. P4070


description:
CHRYSLER NO. 83507019, ELECTRIC, WITH 318-360 FUEL INJ.


description:
FACET NO. 40102, ELECTRIC, 12 VOLT, NEG. GROUND


description:
FORD NO. E6HZ-9350A, FOR 7.8 L DIESEL ENGINE


description:
FORD NO. E0HZ-9A543L (INJECTOR) FOR 7.8 DIESEL ENGINE


description:
PUMP PARTS, FUEL - BRAND LISTED OR EQUAL


description:
BASE, ADAPTER, FOR FUEL PUMP W/O FILTER, 3-3/4 IN. L, 3/4 IN. INLET/OUTLET


description:
POINT KIT, PUMP, FOR REPAIR OF EP12 FUEL PUMP - AC DELCO NO. R630


description:
3-1/2 IN. L, 2 IN. DIA., 12 VOLT, 2 BOLT MT., W/GASKET


description:
SENDING UNIT, FUEL - BRAND LISTED OR EQUAL


description:
CYLINDRICAL, STRAIGHT, LPG, ELECTRIC W/2 WIRES MOUNTED ON HEX HEAD FITTING, 1/4 IN. INLET, 1/4 IN. OUTLET


description:
CYLINDRICAL, 90 DEGREE, LPG, ELECTRIC W/2 WIRES MOUNTED ON HEX HEAD FITTING, 1/4 IN. INLET, 1/4 IN. OUTLET


description:
5/16 IN. OUTLET, 3/8 IN. NPT INLET, BRASS, W/OPEN-SHUT VALVE, INTERNATIONALNO. 61782C91 OR EQUAL


description:
CHEVROLET NO. 25055455, FOR 305/350 GAS. ENGINE


description:
TANK PARTS, FUEL - BRAND LISTED OR EQUAL


description:
FLOAT, COPPER, 1 IN. DIA. X 2 IN. L, FORD NO. COAZ-9202B


description:
VALVE, GAS, 3-WAY, BRASS, 1/4 IN. FPT, W/HANDLE, FOR TANK SWITCHING


description:
VALVE, GAS, FOR SWITCHING AUX. TANKS, CHEV. NO. 14029228


description:
ABC, 15 AMP, 750A/250V AC, OR 10,000A/125V AC, USS, DUAL PURPOSE FUSE


description:
AGX/GGX-20, 20 AMP, ROUND, FOR 12 VOLT AUTO USE


description:
ATC 15 AMP, CART. TYPE, 1/4 IN. X 7/8 IN., SINGLE ELE.


description:
ATM-5, 5 AMP, MINI, 32 VOLT OR LESS, PLUG-IN TYPE, 7/16 IN. W X 5/8 IN. L, BUSS NO. ATM5 OR EQUAL


description:
ATM-5, 5 AMP, MINI, 32 VOLT OR LESS, PLUG-IN TYPE, 7/16 IN. W X 5/8 IN. L, 5/BOX


description:
ATM-10, 10 AMP, MINI, 32 VOLT OR LESS, PLUG-IN TYPE, 7/16 IN. W X 5/8 IN. L


description:
ATM-10, 10 AMP, MINI, 32 VOLT OR LESS, PLUG-IN TYPE, 7/16 IN. W X 5/8 IN. L, 5/BOX


description:
ATM-15, 15 AMP, MINI, 32 VOLT OR LESS, PLUG-IN TYPE, 7/16 IN. W X 5/8 IN. L, BUSS NO. ATM15 OR EQUAL


description:
ATM-15, 15 AMP, MINI, 32 VOLT OR LESS, PLUG-IN TYPE, 7/16 IN. W X 5/8 IN. L, 5/BOX


description:
ATM-20, 20 AMP, MINI, 32 VOLT OR LESS, PLUG-IN TYPE, 7/16 IN. W X 5/8 IN. L


description:
ATM-20, 20 AMP, MINI, 32 VOLT OR LESS, PLUG-IN TYPE, 7/16 IN. W X 5/8 IN. L, 5/BOX


description:
ATM-25, 25 AMP, MINI, 32 VOLT OR LESS, PLUG-IN TYPE, 7/16 IN. W X 5/8 IN. L


description:
ATM-25, 25 AMP, MINI, 32 VOLTS OR LESS, PLUG-IN TYPE, 7/16 IN. W X 5/8 IN. L, 5/BOX


description:
ATM-30, 30 AMP, MINI, 32 VOLT OR LESS, PLUG-IN TYPE, 7/16 IN. W X 5/8 IN. L


description:
ATM-30, 30 AMP, MINI, 32 VOLT OR LESS, PLUG-IN TYPE, 7/16 IN. W X 5/8 IN. L, 5/BOX


description:
MAXIFUSE - 30, 30 AMP @ 32 VOLT OR LESS, PLUG-IN TYPE, GREEN COLOR CODE, 1-1/4 IN. W X 1-1/2 IN. L


description:
MAXIFUSE - 40, 40 AMP @ 32 VOLTS OR LESS, PLUG-IN TYPE, ORANGE COLOR CODE,     1-1/4 IN. W X 1-1/2 IN. L


description:
MAXIFUSE - 50, 50 AMP @ 32 VOLT OR LESS, PLUG-IN TYPE, RED COLOR CODE, 1-1/4 IN. W X 1-1/2 IN. L


description:
MAXIFUSE - 60, 60 AMP @ 32 VOLT OR LESS, PLUG-IN TYPE, BLUE COLOR CODE, 1-1/4 IN. W X 1-1/2 IN. L


description:
VOLTAGE REGULATOR FUSE, NIEHOFF NO. UN-150B


description:
FUSES, AUTO, GLASS, TUBE TYPE, 1/4 IN. X 7/8 IN.


description:
ASSORTMENT, ATM FUSE, BUSS NO. 150 OR EQUAL


description:
ASSORTMENT, MAXI-FUSE, BUSS NO. 245 OR EQUAL


description:
BLOCKS, FUSE, 4 CARRIER, FOR DIESEL ENGINE


description:
CABINET, ATM-FUSE, EMPTY, BUSS NO. 150 OR EQUAL


description:
CABINET, MAXI-FUSE, EMPTY, BUSS NO. 245 OR EQUAL


description:
HOLDER, IN-LINE TYPE, 3 TO 30 AMP, F/BLADE TYPE FUSES


description:
PAPER INTERMEDIATE, BLACK, FOR 2 BARREL CARBURETOR


description:
PAPER TOP GASKET, PAPER - FORD NO. C2AZ-9447F OR EQUAL


description:
PAPER PLASTIC, W/RETAINER, WHITE - FORD NO. C4TZ-9B563A OR EQUAL


description:
THERMOSTAT, DUAL, FORD NO. E6HZ-8255A OR EQUAL


description:
THERMOSTAT, 1-25/32 IN. I.D., 2-9/16 IN. O.D., W/1/4 IN. BOLT HOLES, FOR 4 AND 6 CYL, UNITS, FORD NO.C8SZ-8255A OR EQUAL


description:
THERMOSTAT HOUSING, 2-HOLE MOUNT, FEL-PRO NO. 35355 OR EQUAL


description:
WATER OUTLET, PAPER, 1-7/8 IN. I.D., 9/16 IN. STUD HOLE, VICTOR NO. C-24005OR EQUAL


description:
WATER PUMP, PAPER, SELF-SEALING, FOR 6.9 LTR. ENGINE, INTERNATIONAL NO. 1804136C3 OR EQUAL


description:
3/4 IN. I.D., W/ 5/16 IN. BOLT HOLES, ASBESTOS, WHITE


description:
ENGINE, 1-3/16 IN. BORE, 3 IN. CENTER TO CENTER MTG. SCREW HOLE, FOR 6 CYL. ENGINE


description:
ENGINE, 2-1/4 IN. I.D., 1/2 IN. STUD HOLES, FOR 33-MD FORD ENGINE


description:
ETHER KIT, RUBBER, 1-7/16 IN. O.D., 1/4 IN. I.D., 5/16 IN. THICK


description:
FUEL, DETROIT-DIESEL ALLISON NO. 8921033 OR EQUAL


description:
MANIFOLD FOR FORD F-600, 330 C.I.D. ENGINE, VICTOR NO. MS-1557 OR EQUAL


description:
OIL PAN, DETROIT-DIESEL ALLISON NO. 8922784 OR EQUAL


description:
8.2 OVERHAUL SET, CLEVITE NO. CH6974D OR EQUAL


description:
VALVE COVER, CATERPILLAR NO. 9L-8020 OR EQUAL


description:
VALVE COVER, DETROIT-DIESEL ALLISON NO. 8920271 OR EQUAL


description:
VALVE COVER, FEL-PRO NO. VS-12869 OR EQUAL


description:
MANIFOLD GASKET FOR EXHAUST SYSTEM ON CHEVROLET V-8 ENGINE


description:
AIR, 6-1/4 IN. O.D. X 1/16 IN. THICK, PAPER, ARF NO. G17


description:
AIR, 8.5 IN. O.D. X 1/16 IN. THICK, CORK, W/5 HOLES W/ 1/8 IN. DIA.


description:
AIR CLEANER, 3-5/8 IN., VICTOR NO. G-26617 OR EQUAL


description:
AIR CLEANER, PAPER, 5-1/16 IN. I.D., 5-3/8 IN. O.D., ADHESIVE BACKED


description:
AIR CLEANER, PAPER, 5-5/16 IN. I.D., 5-3/4 IN. O.D.


description:
COVER, OIL FILTER, FOR MBFP, PUROLATOR NO. 6664119 OR EQUAL


description:
COVER, OIL FILTER, WIX NO. 15114 OR EQUAL


description:
OIL, 8-3/4 IN. O.D. FOR AC DELCO NO. C267


description:
OIL, NEOPRENE, ROUND, OIL SHELL TO HEAD, GALION NO. D-79361


description:
OIL PAN REINFORCEMENT ASSEMBLY, DETORIT-DIESEL ALLISON NO. 8922785 OR EQUAL


description:
POWER STEERING, RUBBER, 5 IN. DIA. X 1/8 IN. THICK


description:
GASKETS, AUTOMOTIVE, MISC (BRAND LISTED OR EQUAL)


description:
INTAKE MANIFOLD. GMC NO. 10048963 (GMC S15 V8)


description:
OIL PAN, VICTOR NO. 0S-30920X (DODGE 6 CYL)


description:
THERMOSTAT, NAPA NO. 1053ST (DODGE TRUCK)


description:
VALVE COVER, VICTOR NO. VS-38110 (GMC V8)


description:
VALVE COVER, VICTOR NO. VS-39720 (DODGE 6 CYL)


description:
CORK, 3/32 IN. X 12 IN. X 35 IN., MCCORD NO. C1003CE OR EQUAL


description:
CORK GRANULES, NEOPRENE EMBEDDED, 1/8 IN. THICK W/10-30 MESH, BROWN


description:
GREEN FIBRE, 1/64 IN. THICK X 36 IN. W X 50 YD. ROLL


description:
NEOPRENE RUBBER, 1/32 IN. X 36 IN. X 100 LB. ROLL, MEDIUM DENSITY, 60 SHORE A HARDNESS


description:
NEOPRENE RUBBER, 1/16 IN. X 36 IN. X 100 LB. ROLL, MEDIUM DENSITY, 60 SHORE A HARDNESS


description:
NEOPRENE RUBBER, 1/8 IN. X 36 IN. X 100 LB. ROLL, MEDIUM DENSITY, 60 SHORE A HARDNESS


description:
NEOPRENE RUBBER, 1/4 IN. X 36 IN. X 100 LB. ROLL, MEDIUM DENSITY, 60 SHORE A HARDNESS


description:
NEOPRENE RUBBER, W/20 OZ. DUCK FABRIC INSERTED, 1/8 IN. X 36 IN. X 100 LB. ROLL, MEDIUM DENSITY, 50 SHORE HARDNESS


description:
PAPER, TREATED, 1/32 IN. X 36 IN. W X 50 YD./ROLL


description:
VELLUMOID, 1/16 IN. X 36 IN. X 25 SQFT. ROLL (STYLE 447)


description:
VELLUMOID, 1/8 IN. X 36 IN. X 25 SQFT. ROLL (STYLE 447)


description:
PTO ELEC MTR, PAPER FIBER, 3 IN. I.D. X 3-7/8 IN., O.D., W/ 1/8 IN. BOLT HOLES - FORD NO. B9TZ - 4104A OR EQUAL


description:
GASKETS, THERMOSTAT - BRAND LISTED OR EQUAL


description:
FEL-PRO NO. 35024, 2-HOLE MOUNT, 1-5/8 IN. DIA.


description:
3/8 IN. SQUARE BRAIDED GRAPHITE IMPREGNATED - 30 FT/ROLL


description:
5/8 IN. GRAPHITE SYNTHETIC, GEN GASK NO. 1011254 OR EQUAL


description:
5/8 IN. TEFLON IMPREGNATED, GEN GASK NO. 1012254 OR EQUAL


description:
Glass and Supplies: Door, Windshield, etc.


description:
GLASS, TINTED AND SHADED (EXCEPT WINDSHIELD)


description:
GLASS INSTALLATION KIT (EXCEPT WINDSHIELD)


description:
WINDSHIELD GLASS, SHADED, FOR CHEV. AND GMC TRUCKS 1972-1987, NATIONAL AUTO GLASS NO. W847S OR EQUAL


description:
WINDSHIELD GLASS, SHADED, FOR FORD TRUCKS 1980-1987, NATIONAL AUTO GLASS NO. W910S OR EQUAL


description:
WINDSHIELD GLASS, SHADED, FOR DODGE TRUCKS 1972-1987, NATIONAL AUTO GLASS NO. W914S OR EQUAL


description:
WINDSHIELD GLASS, SHADED, FOR CHEVROLET TRUCKS 1989-1990, NATIONAL AUTO GLASS NO. W1026 OR EQUAL


description:
TINTED, AUTOMOTIVE, NAGS NO. 4586T OR EQUAL


description:
TINTED,AUTOMOTIVE, NAGS NO. 4645T OR EQUAL


description:
TINTED, AUTOMOTIVE, NAGS NO. 4744T OR EQUAL


description:
4-1/4 IN. X 3-3/8 IN. X 1-3/8 IN., MALE PLUG-IN TYPE, W/2 MTG. LUGS, PLASTIC ENCLOSURE, LIMITS RPM


description:
Hose and Hose Fittings: Brake, Heater, Radiator, Vacuum, Washer, Wiper, etc.


description:
1/4 IN., W/COUPLINGS, NO. 27500 - 25 FT/ROLL


description:
1/4 IN., W/COUPLINGS, NO. 27502 - 50 FT/ROLL


description:
1/4 IN., W/COUPLINGS, NO. 27511 - 25 FT/ROLL


description:
1/4 IN., W/COUPLINGS, NO. 27515 - 50 FT/ROLL


description:
1/4 IN., W O/COUPLINGS, NO. 28673 - 300 FT./ROLL


description:
1/4 IN., W/O COUPLINGS, NO. 28675 - 300 FT/REEL


description:
3/8 IN., AIR BRAKE HOSE, NO. 27200 - 50 FT/ROLL


description:
3/8 IN., W/COUPLINGS, NO. 27489 - 50 FT. ROLL


description:
3/8 IN., W/COUPLINGS, NO. 27497 - 25 FT./ROLL


description:
3/8 IN., W/COUPLINGS, NO. 27498 - 50 FT./ROLL


description:
3/8 IN., W/COUPLINGS, NO. 27501 - 25 FT/ROLL


description:
3/8 IN., W/COUPLINGS, NO. 27503 - 50 FT/ROLL


description:
3/8 IN., W/COUPLINGS, NO. 27513 - 25 FT/ROLL


description:
3/8 IN., W/O COUPLINGS, NO. 27516 - 50 FT/ROLL


description:
3/8 IN., W/COUPLINGS, NO. 27517 - 50 FT/ROLL


description:
3/8 IN., W O/COUPLINGS, NO. 28676 - 300 FT./ROLL


description:
1/2 IN., AIR HOSE W/COUPLING, NO. 27519 - 50 FT/ROLL


description:
1/4 IN., W/COUPLINGS, NO. 27500  - 25 FT/ROLL


description:
1/2 IN. X 1/4 IN. W/COUPLINGS, 15 FT. RECOIL


description:
3/8 IN., W/COUPLINGS, NO.27501  - 25 FT/ROLL


description:
1/4 IN., W/COUPLINGS, NO. 27502  - 50 FT/ROLL


description:
1/4 IN., W/COUPLINGS, NO. 27511  - 25 FT/ROLL


description:
3/8 IN., W/COUPLINGS, NO. 27513 -  25 FT/ROLL


description:
1/4 IN., W/O COUPLINGS, NO. 27514  - 50 FT/ROLL


description:
1/4 IN., W/COUPLINGS, NO. 27515  - 50 FT/ROLL


description:
3/8 IN., W/O COUPLINGS, NO. 27516  - 50 FT/ROLL


description:
3/8 IN., W/COUPLINGS, NO. 27517  - 50 FT/ROLL


description:
1/2 IN., AIR HOSE W/COUPLING, NO. 27519  - 50 FT/ROLL


description:
1/4 IN., W/O COUPLINGS, NO. 28675  - 300 FT/REEL


description:
HOSE, AIR CONDITIONING (AUTO.) - BRAND LISTED OR EQUAL


description:
3/8 IN. X 12 IN., 225 P.S.I., WITH #4 FEMALE JIC


description:
3/8 IN. X 21 IN., 225 P.S.I., WITH #8 FEMALE JIC AND 3/8 IN. MALE PIPE


description:
7/16 IN. O.D. X 20-1/2 IN. L, BRASS INLET/OUTLET FITTINGS 1-1/4 IN. X 1-3/4IN. ONE END, THREADED 5/8 IN. X 1-5/16 IN OTHER END, RUBBER


description:
1/2 IN. I.D., 3/8 IN. MPT END X 3/8 IN. MPT SWIVEL X 36 IN. LONG


description:
1/2 IN. X 1 IN., 225 P.S.I., WITH 5/8 IN. FEMALE JIC AND 1/2 IN. MALE PIPE


description:
1/2 IN. X 12 IN., 225 P.S.I., WITH 5/8 IN. FEMALE JIC AND 1/2 IN. MALE PIPE


description:
1/2 IN. X 24 IN., 225 P.S.I., WITH 5/8 IN. FEMALE JIC AND 1/2 IN. MALE PIPE


description:
1/4 IN. I.D. X 1/2 IN. O.D., 1400 P.S.I., COTTON COVER


description:
3/8 IN. I.D. X 5/8 IN. O.D., 1400 P.S.I., COTTON COVER


description:
HOSE, AIR COMPRESSOR - BRAND LISTED OR EQUAL


description:
HOSE, AIR CLEANER (BRAND LISTED OR EQUAL)


description:
2 IN. X 18 IN. LONG, METAL FLEX - GATES NO. 28090 OR EQUAL


description:
2 IN. X 18 IN. LONG, CORRUGATED ALUM., UNIVERSAL - GATES NO. 28095 OR EQUAL


description:
2-1/4 IN., FLEX., RUBBER - GATES NO. 2363 OR EQUAL


description:
5/8 IN. I.D. X 6 IN. L, L-SHAPED, RUBBER, CHEVROLET NO. 14015438


description:
2 IN. X 17-3/4 IN. LONG, FLEX., FORD NO. C9UZ-9652A OR EQUAL


description:
1/2 IN. X 25 FT. - GATES NO. 27550 OR EQUAL


description:
HOSE, CURVED CONNECTIONS, RADIATOR - GATES OR EQUAL


description:
HOSE, CURVED CONNECTIONS, RADIATOR - BRAND LISTED OR EQUAL


description:
INTERNATIONAL NO. 571965C1 FOR MODEL 1854 TRUCK


description:
1-3/4 IN. X 6 FT. - GATES NO. 23828 OR EQUAL


description:
2 IN. X 6 FT. - GATES NO. 23832 OR EQUAL


description:
2-3/4 IN. X 6 FT. - GATES NO. 23844 OR EQUAL


description:
3 IN. FOR AIR INTAKE AND DEFROSTER - GATES NO. 23848 OR EQUAL


description:
4 IN. X 6 FT. - GATES NO. 23864 OR EQUAL


description:
1-1/2 IN. X 36 IN. L, GATES NO. 28088 OR EQUAL


description:
2 IN. I.D. X 12 IN., FLEXIBLE, W/TINFOIL INNER AND OUTER COVER


description:
2 IN. DIA. X 18 IN. L, FLEXIBLE, ALUM. DUCT HOSE,  GATES NO. 28095 OR EQUAL


description:
2 IN. X 18 IN. ACCORDIAN STYLE W/WIRE INSERT


description:
1/8 IN. FUEL LINE HOSE, NO. 27000 - 25 FT./ROLL


description:
3/16 IN. FUEL LINE HOSE, NO. 27001 - 25 FT./ROLL


description:
1/4 IN. FUEL LINE HOSE, NO. 27002 - 25 FT/ROLL


description:
5/16 IN. FUEL LINE HOSE, NO. 27003  - 25 FT/ROLL


description:
3/8 IN. FUEL LINE HOSE, NO. 27004  - 25 FT/ROLL


description:
1/4 IN. FUEL LINE HOSE, NO. 27022  - 50 FT/ROLL


description:
5/16 IN. FUEL LINE HOSE, NO. 27023  - 50 FT/ROLL


description:
3/8 IN. FUEL LINE HOSE, NO. 27024  - 50 FT/ROLL


description:
1/2 IN. FUEL LINE HOSE, FLEX. - 25 FT/ROLL


description:
3/4 IN. BARREL PUMP HOSE, W/COUPLINGS, NO. 27435  - 8 FT/ROLL


description:
3/4 IN. GAS HOSE, WITH 3/4 IN. COUPLINGS, NO. 27452   - 12 FT/ROLL


description:
3/4 IN. GAS HOSE, WITH 3/4 IN.  COUPLINGS, NO. 27453   - 14 FT/ROLL


description:
3/4 IN. GAS HOSE, WITH 3/4 IN. COUPLINGS, NO. 27454   - 17 FT/ROLL


description:
1 IN., GAS HOSE, 1-1/2 IN. O.D., W/1 IN. COUPLINGS, NO. 27460  - 12 FT/ROLL


description:
1 IN., GAS HOSE, 1-1/2 IN. O.D., W/1 IN. COUPLINGS, NO. 27461  - 14 FT/ROLL


description:
3/4 IN. GAS HOSE, WITH 3/4 IN. COUPLINGS, NO. 27471   - 12 FT/ROLL


description:
3/4 IN. GAS HOSE, WITH 3/4 IN. COUPLINGS, NO. 27472   - 14 FT/ROLL


description:
1 IN., 2-BR., FUEL HOSE, W/O COUPLINGS, NO. 28714  - 125 FT/ROLL


description:
5/8 IN. ID, 41 1/2 IN. CENTERLINE LENGTH, NO. 10908


description:
5/8 IN. SAF. STR. HEATER HOSE, NO. 28411   - 50 FT/LGTH


description:
3/4 IN. SAF. STR. HEATER HOSE, NO. 28412   - 50 FT/LGTH


description:
1 IN. SAF. STR. HEATER HOSE, NO. 28413  - 50 FT/LGTH


description:
5/8 IN. SAF. STR. HEATER HOSE, NO. 28414- 100 FT/LGTH


description:
5/8 IN. SAF. STR. HEATER HOSE, NO. 28415  - 250 FT/LGTH


description:
5/8 IN. F.W. SAFETY STRIPE, NO. 28431  - 50 FT/LGTH


description:
3/4 IN. F.W. SAFETY STRIPE, NO. 28432  -  50 FT/LGTH.


description:
3/4 IN. X 27 IN. L, FORMED, RUBBER AND ALUM. W/ALUM. TUBING FITTING


description:
5/8 IN. GR. STRIPE HEATER HOSE, NO. 28441  - 50 FT/LGTH


description:
7/8 IN. GR. STRIPE HEATER HOSE, NO. 28443  - 50 FT/LGTH


description:
1 IN. GR. STRIPE HEATER HOSE, NO. 28444  - 50 FT/LGTH


description:
1/2 IN., UNIV., W/WIRE TO FORM, NO. 28450 - 50 FT/LGTH


description:
1/2 IN. I. D., HYD. HOSE, (10C5E) MED. PRESSURE, GATES NO. 85694 OR EQUAL 50 FT/ROLL


description:
1-1/4 IN., 2 WIRE BRAID, WEATHERHEAD NO. H452520 OR EQUAL


description:
1/2 IN. ID X 0.75 IN. OD, 300 LB. WORKING PRESSURE, 1200 LB. BURST PRESSURE, MIN. BEND RADIUS 5, COVER - RED NITRILE, TUBE - NITRILE, REINFORCEMENT ONE FIBER BRAID, NO. 70675


description:
3/4 IN.ID X 1.04 IN. OD, 300 LB. WORKING PRESSURE, 12OO LB. BURST PRESSURE, MIN BEND RADIUS 7, COVER - RED NITRILE, TUBE - NITRILE, REINFORCEMENT ONE FIBER BRAID, NO. 70689


description:
1 IN.ID X 1.45 IN. OD, 212 LB. WORKING PRESSURE, 800 LB. BURST PRESSURE, MIN. BEND RADIUS 3, COVER BLACK NITRILE, TUBE - NEOPRENE REINFORCEMENT OF DOUBLE SPIRAL FIBER WITH HELICAL SPIRAL WIRE, NO. 70134


description:
1.5 IN. ID X 1.95 IN. OD, 162 LB. WORKING PRESSURE, 650 LB. BURST PRESSURE, MIN BEND RADIUS 3, COVER - BLACK NITRILE, TUBE - NEOPRENE REINFORCEMENT OF DOUBLE SPIRAL FIBER WITH HELICAL SPIRAL WIRE, NO. 70136


description:
5/16 IN. I.D., HYD. HOSE, (6C5E) MED. PRESSURE, NO. 85692  - 50 FT/ROLL


description:
5/26 IN., 2-BR HOSE, GATES NO. 27405 - 50 FT/ROLL


description:
3/8 IN. 2 BR. HOSE, W/O COUPLINGS, NO. 27407  - 50 FT/ROLL


description:
3/8 IN. 2 BR. HOSE, W/O COUPLINGS, NO. 27407 - 50 FT/ROLL


description:
13/32 IN. I.D., HYD. HOSE, (8C5E) MED. PRESSURE, NO. 85693  - 50 FT/ROLL


description:
1/2 IN. I.D. X 3/4 IN. O.D., 1 BR HOSE, W/O COUPLINGS, NO. 27410


description:
1/2 IN. 2 BR. HOSE, W/O COUPLINGS, NO. 27411  - 50 FT/ROLL


description:
1/2 IN. I. D., HYD. HOSE, (10C5E) MED. PRESSURE, NO. 85694  - 50 FT/ROLL


description:
1/2 IN. 2 BR. HOSE, W/O COUPLINGS, NO. 27411 - 50 FT/ROLL


description:
1/2 IN. 2 BR. HOSE, W/O COUPLINGS - 300 FT/REEL


description:
3/8 IN. ID., 200 P.S.I., W/O COUPLING, B. F. GOODRICH NO. GS6892


description:
HOSE, POWER STEERING - BRAND LISTED OR EQUAL


description:
1/4 IN. X 38 IN. L, RUBBER W/FTGS., CHEVROLET NO. 26008920


description:
3/8 IN. X 39 IN. L, RUBBER W/FTGS., CHEVROLET NO. 7833371


description:
3/8 IN. X 39 IN., RUBBER W/MALE FTGS., CHEVROLET NO. 26012448


description:
3/8 IN. X 43 IN. L, RUBBER W/FTGS., CHEVROLET NO. 26006306


description:
3/8 IN. DIA X 24 IN., FLEX. RUBBER W/MALE ENDS


description:
1/2 IN. I.D. X 3/4 IN. O.D., RETURN, WEATHERED NO. H00908


description:
CHRYSLER NO. 4116652, FOR DODGE 1/2 TON PICKUP


description:
1 IN.I.D. X 1/8 IN. WALL THICKNESS, 1-WIRE, RUBBER, FOR EQUIPMENT W/PROPANE CONVERSION


description:
NO. 21457, BY-PASS, CURVED, 1-3/8 IN. I.D. X 5-5/8 IN. L., F/8.2 LITER DETROIT DIESEL ENGINE IN 1980-90 GMC MED/HD TRUCKS


description:
NO. 21473, UPPER, CURVED, 2 IN. I.D. X 5-3/8 IN. L.


description:
NO. 24012, STRAIGHT, 3/4 IN., - 3 FT/LGTH


description:
NO. 24014, STRAIGHT, 7/8 IN., - 3 FT/LGTH


description:
NO. 24018, STRAIGHT, 1-1/8 IN., - 3 FT/LGTH


description:
NO. 24020, STRAIGHT, 1-1/4 IN., - 3 FT/LGTH


description:
NO. 24022, STRAIGHT, 1-3/8 IN., - 3 FT/LGTH


description:
NO. 24024, STRAIGHT, 1-1/2 IN., - 3 FT/LGTH


description:
NO. 24026, STRAIGHT, 1-5/8 IN. - 3 FT/LGTH


description:
NO. 24028, STRAIGHT, 1-3/4 IN. - 3 FT/LGTH


description:
NO. 24030, STRAIGHT, 1-7/8 IN. - 3 FT/LGTH


description:
NO. 24034, STRAIGHT, 2-1/8 IN. - 3 FT/LGTH


description:
NO. 24036, STRAIGHT, 2-1/4 IN. - 3 FT/LGTH


description:
NO. 24040, STRAIGHT, 2-1/2 IN. - 3 FT/LGTH


description:
NO. 24044, STRAIGHT, 2-3/4 IN. - 3 FT/LGTH


description:
NO. 24048, STRAIGHT, 3 IN.,  - 3 FT./LGTH.


description:
NO. 24056, STRAIGHT, 3-1/2 IN., UNIV. - 3 FT./LENGTH


description:
NO. 24064, STRAIGHT, 4 IN. - 3 FT./LGTH.


description:
NO. 24212, STRAIGHT, 3/4 IN. I.D. X 3 FT. L., 80 P.S.I., 2-PLY, F/COOLING SYSTEM ON HEAVY EQUIPMENT


description:
NO. 24222, STRAIGHT, 1-3/8 IN. I.D. X 3 FT. L., 65 P.S.I., 2-PLY, F/COOLING SYSTEM ON HEAVY EQUIPMENT


description:
NO. 24918, STRAIGHT, FLEXIBLE, 1-1/8 IN. DIA., WIREBOUND - 3 FT./LGTH.


description:
GOODYEAR NO. 51413, FLEXIBLE, 38MM X 349MM, UNIV.


description:
JOHN DEERE NO. T-114747, UPPER, FLEX., CURVED, 2 IN. ID. X 2-1/8 IN. O.D.


description:
MOTORCRAFT NO. KM-831, TOP HOSE FOR CATERPILLAR ENGINE


description:
NAPA NO. 613, STRAIGHT, 2 IN. I.D., BLACK RUBBER - 3 FT/LGTH.


description:
HOSE, RADIATOR, FLEXIBLE - BRAND LISTED OR EQUAL


description:
HOSE, RADIATOR, STRAIGHT - BRAND LISTED OR EQUAL


description:
3/4 IN. I.D. X 1 IN. O.D., GOODYEAR NO. 56012


description:
HOSE, RADIATOR, FORMED - BRAND LISTED OR EQUAL


description:
2-1/8 IN. X 2-1/8 IN. X 14-1/2 IN., L SHAPE, LOWER, FOR KBL MODEL LK400 LOADER W/NISSAN ENGINE, KBL NO. VG21503D9980 OR EQUAL


description:
2-1/8 IN. X 2-1/8 IN. X 20 IN., S SHAPE, UPPER, FOR KBL MODEL LK400 LOADER W/NISSAN ENGINE, KBL NO. VG21503Z0068 OR EQUAL


description:
2-1/2 IN. X 2-5/8 IN. X 13-3/4 IN. L, LOWER, FOR IHC MODEL S1700 9.0L TRUCK


description:
3-1/2 IN. O.D. X 2-7/8 IN. I.D. X 5-1/4 IN. L, INCL. CENTER BULB, WVO NO. G15506183 OR EQUAL


description:
NO. 27307, 3/4 IN., H.D. STEAM HOSE, W/O COUPLINGS - 25 FT/ROLL


description:
NO. 27313, 1/2 IN., H.D. STEAM HOSE, W/O COUPLINGS - 50 FT/ROLL


description:
NO. 27551, 1/2 IN., H.D. CAR WASHER HOSE, W/O COUPLINGS - 50 FT/ROLL


description:
HOSE: VACUUM TUBING, WINDSHIELD WIPER AND WASHER - GATES OR EQUAL


description:
VACUUM TUBING, 1/8 IN., NO. 27041 - 50 FT/ROLL


description:
VACUUM TUBING, 3/16 IN., NO. 27042 - 50 FT/ROLL


description:
VACUUM TUBING, 1/4 IN., NO. 27043 - 50 FT/ROLL


description:
VACUUM TUBING, 5/16 IN., NO. 27044 - 50 FT/ROLL


description:
VACUUM TUBING, 1/2 IN., NO. 27211 - 50 FT./ROLL


description:
VACUUM TUBING, STEEL BRAIDED, 5/8 IN., NO. 12C5C - 50 FT/ROLL


description:
VACUUM TUBING, 3/4 IN., NO. 27213 - 50 FT/ROLL


description:
WIPER HOSE, 3/16 IN., NO. 27072 - 50 FT/ROLL


description:
WIPER HOSE, 1/4 IN., 1 BRAID HOSE,  NO. 27073 - 50 FT/ROLL


description:
WIPER HOSE, 1/4 IN. I.D., 5/16 IN. NIPPLE SIZE, 1-BR.,  NO. 27074 - 50FT/ROLL


description:
WIPER HOSE, 5/16 IN. I.D., 9/64 IN. O.D.


description:
NIPPLE, 1 IN. X 1-1/4 IN., THREADED, SWEDGE, BARBED


description:
ADAPTER, FEMALE, 3/4 IN. X 1/2 IN. PT, QUICK COUPLER, SEAL FAST TYPE A OR EQUAL


description:
ADAPTER, RADIATOR HOSE REPAIR, INSERT X INSERT, WESTWARD NO. 73579 OR EQUAL


description:
ATTACHMENT, FLEX. HOSE, 13 IN. ADJ. METAL HOSE AND STRAINER SCN, 7/8 IN. ROUND, 4 IN. DIA. PLASTIC CUP


description:
BARB, 5/16 IN. M-THREAD X 1/4 IN. STEM X 1-3/4 IN. LGTH., BRASS - EDELMANNOR EQUAL - 25/PKG.


description:
CONNECTOR, HEATER HOSE, 3/4 IN. MNPT AND PLASTIC RETAINER, MTS. ON INTAKE MANIFOLD, FOR FORMED HEATER HOSE AND ALUM. TUBING


description:
CONNECTOR, TRAILER,  3/4 IN. FHT X 3/8 IN. MCT


description:
CONNECTOR, TRAILER,  3/4 IN. MHT X 3/8 IN. MCT


description:
CONNECTOR, TRAILER,  3/4 IN. FHT X 1/2 IN. MCT


description:
CONNECTOR, TRAILER,  3/4 IN. MHT X 1/2 IN. MCT


description:
COUPLER, QUICK, 3/4 IN., STRAIGHT 2 IN. SHANK, W/SWEDGE NIPPLE, SEAL FAST TYPE C OR EQUAL


description:
END, AIR HOSE, BRASS, F/ 3/8 IN. I.D. X 11/16 IN. O.D. W/ 3/8 IN. MPT


description:
END, AIR HOSE, BRASS, F/ 1/2 IN. I.D. X 13/16 IN. O.D. W/ 1/2 IN. MPT


description:
NIPPLE, BRASS, 1/2 IN. NPT - MALE, FOR 5/8 IN. FUEL HOSE


description:
NIPPLE, 3/4 IN. FPT X 3/4 IN. MHT,  KIENER NO. HP-6 OR EQUAL


description:
NIPPLE, 3/4 IN., AIR HOSE, BOWES NO. 851012 OR EQUAL


description:
NIPPLE, 1 IN. MPT X 1 IN. HOSE SHANK, 2-1/2 IN. L


description:
NIPPLE ADAPTER, 1/2 IN. PIPE TO 1/2 IN. HOSE


description:
NIPPLE ADAPTER, 1-1/4 IN. PIPE TO 1 IN. HOSE


description:
NIPPLE ADAPTER, 1-1/2 IN. PIPE TO 1/2 IN. HOSE


description:
REDUCER, 1 IN. PPT X 3/4 IN. MHT,   KIENER NO. HP-12 OR EQUAL


description:
ADAPTER, 1/4 IN. FNPT X MALE QUICK DISCONNECT FOR CAM LEVER COUPLER


description:
ADAPTER, 3/8 IN. FNPT X MALE QUICK DISCONNECT, FOR CAM LEVER COUPLER


description:
ADAPTER, 1/2 IN. FNPT X MALE QUICK DISCONNECT, 1-5/8 IN. L X 1-5/16 IN. W, FOR CAM LEVER COUPLER


description:
COUPLER, QUICK DISCONNECT, 3/4 IN. HOSE SHANK X FEMALE CAM LEVER


description:
COUPLER, CAM/LOCK, 1-1/4 IN. FEMALE TO 3/4 IN. MALE


description:
COUPLER, CAM/LOCK, 1-1/4 IN. MALE TO 3/4 IN. FEMALE


description:
COUPLER, CAM/LOCK, 2 IN. FEMALE TO 1 IN. MALE


description:
COUPLER, CAM/LOCK, 2 IN. MALE TO 1-1/2 IN. FEMALE


description:
ELL, STREET, 1-1/4 IN. FPT X 1-1/4 IN. MPT, 90 DEG.


description:
ELL, STREET, 1-1/2 IN. MPT X 1-1/2 IN. FPT


description:
NIPPLE, 1/2 IN. MPT X 1/2 IN. HOSE X 90 DEGREE


description:
NIPPLE, 3/4 IN. MPT X 1/2 IN. HOSE, 90 DEG.


description:
NIPPLE, 3/4 IN. MPT X 3/4 IN. HOSE, 90 DEG.


description:
NIPPLE, 3/4 IN. MPT X 1 IN. HOSE, 90 DEG.


description:
FITTINGS, HYDRAULIC HOSE - BRAND LISTED OR EQUAL


description:
ADAPTER, PIPE (SAE AUTOMOTIVE) 45 DEG. STREET ELBOW, 1/4 IN. PIPE, PARKER NO. 2214-P-4-4 OR EQUAL


description:
ADAPTER, PIPE (SAE AUTOMOTIVE) SQUARE HEAD PLUG 1/2 IN. PIPE THREAD, PARKER NO. 211-P-8 OR EQUAL


description:
ADAPTER, PIPE (SAE AUTOMOTIVE) 90 DEG. STREET ELBOW, BRASS, -65 TO +250F AT 1000 PSI, 1/4 FPT X 1/4 MPT, PARKER NO. 1202P-4-4 OR EQUAL


description:
ADAPTER, COUPLING - PARKER HANNIFIN NO. 210368


description:
ADAPTER, COUPLING - PARKER HANNIFIN NO. 6-FTX-S


description:
COUPLING, IMPERIAL NO. HA0402MB OR EQUAL


description:
COUPLING, IMPERIAL NO. HA04X02MB OR EQUAL


description:
COUPLING, IMPERIAL NO. HA04X04NJ OR EQUAL


description:
COUPLING, IMPERIAL NO.HA04X05NJ OR EQUAL


description:
COUPLING, IMPERIAL NO. HA04X06MB OR EQUAL


description:
COUPLING, IMPERIAL NO. HA04X06NJ OR EQUAL


description:
COUPLING, IMPERIAL NO. HA0606NJ OR EQUAL


description:
COUPLING, IMPERIAL NO. HA0606MF OR EQUAL


description:
COUPLING, IMPERIAL NO. HA0606MF45T OR EQUAL


description:
COUPLING, IMPERIAL NO. HA0606MF90T OR EQUAL


description:
COUPLING, IMPERIAL NO. HA0606NS OR EQUAL


description:
COUPLING, IMPERIAL NO. HA0606NST OR EQUAL


description:
COUPLING, IMPERIAL NO. HA0606NS45T OR EQUAL


description:
COUPLING, IMPERIAL NO. HA0606NS90T OR EQUAL


description:
COUPLING, IMPERIAL NO. HA0608MJ OR EQUAL


description:
COUPLING, IMPERIAL NO. HA06X06MB OR EQUAL


description:
COUPLING, IMPERIAL NO. HA06X08NJ OR EQUAL


description:
COUPLING, IMPERIAL NO. HA0808MJ OR EQUAL


description:
COUPLING, IMPERIAL NO. HA0808NJ OR EQUAL


description:
COUPLING, IMPERIAL NO. HA08X08MB OR EQUAL


description:
COUPLING, IMPERIAL NO. HA08X10MJ OR EQUAL


description:
COUPLING, IMPERIAL NO. HA08X10NJ OR EQUAL


description:
COUPLING, IMPERIAL NO. HA08X12NJ OR EQUAL


description:
COUPLING, IMPERIAL NO. HA1212MJ OR EQUAL


description:
COUPLING, IMPERIAL NO. HA12X12MB OR EQUAL


description:
COUPLING, IMPERIAL NO. HA12X12NJ OR EQUAL


description:
COUPLING, IMPERIAL NO. HA12X12NS OR EQUAL


description:
COUPLING, IMPERIAL NO. HA12X14MJ OR EQUAL


description:
COUPLING, IMPERIAL NO. HA12X14NJ OR EQUAL


description:
COUPLING, IMPERIAL NO. HA12X16MJ OR EQUAL


description:
COUPLING, IMPERIAL NO. HA12X16NJ OR EQUAL


description:
COUPLING, IMPERIAL NO. HA16X16MB OR EQUAL


description:
COUPLING, IMPERIAL NO.HA16X16NJ OR EQUAL


description:
COUPLING, IMPERIAL NO. HL24X24MJ OR EQUAL


description:
COUPLING, IMPERIAL NO. HU04X04MB OR EQUAL


description:
COUPLING, IMPERIAL NO. 60SA0806 OR EQUAL


description:
COUPLING, IMPERIAL NO. 60SA12X12 OR EQUAL


description:
COUPLING, IMPERIAL NO. 60UA04X04 OR EQUAL


description:
ELBOW, COUPLING - PARKER HANNIFIN NO. 6C50X5


description:
1/2 IN. - 14 THREAD, AEROQUIP NO. 5600-8-10S OR EQUAL


description:
3/4 IN. - 14 THREAD, PIONEER NO. 4100-5 OR EQUAL


description:
CYLINDER, HYDRAULIC, BOMBARDIER NO. 6800115 OR EQUAL


description:
NIPPLE, COUPLER, 1/2 IN. F-NPT, MALE HALF NIPPLE


description:
PUMP, HYDRAULIC, COMMERCIAL INTERTECH NO. 308-9110-088 OR EQUAL (FOR USE WITH DUMP TRUCKS)


description:
TANKS, HYDRAULIC - BRAND LISTED OR EQUAL


description:
Ignition System: Condensers, Points, Rotors, Spark Plugs (Not Aircraft), Spark Plug Wires, etc.


description:
STANDARD NO. LX343, 2-WIRE, 3-TERMINAL, MAGNETIC PICKUP


description:
MAGNETO, IGNITION - BRAND LISTED OR EQUAL


description:
DELCO-REMY NO. D-1918 5 PIN, FOR 305 CUBIC INCH ENGINES


description:
STANDARD NO. LX315, 7-PIN, FOR 1980-1991 CHEVROLET IGNITION


description:
BOOT, SPARK PLUG, DELCO NO. 8905587-7940 OR EQUAL


description:
IGNITION KIT CONSISTING OF POINTS, CONDENSER, SEALS, GASKETS AND BUSHINGS, MAGNETO NO. SK-3 OR EQUAL


description:
POINTS, HEAVY DUTY VENTILATED - NIEHOFF OR EQUAL


description:
RESISTORS, IGNITION (BRAND LISTED OR EQUAL)


description:
12 VOLT, 3-TERMINAL, FOR LATE MODEL FORD PICKUP TRUCKS, FORD NO. E9TZ11450B


description:
SPARK PLUGS, MARINE - BRAND LISTED OR EQUAL


description:
SPARK PLUGS, POWER MOWER & SMALL ENGINE - BRAND LISTED OR EQUAL


description:
SPARK PLUGS, REGULAR & EXTENDED GAP - A C DELCO OR EQUAL


description:
SPARK PLUGS, RESISTOR - A C DELCO OR EQUAL


description:
VACUUM CONTROL, IGNITION (ELECTRONIC) - BRAND LISTED OR EQUAL


description:
VACUUM MODULATOR, BORG WARNER NO. VM319 OR EQUAL


description:
BELDEN NO. 700254, FOR CHEV. C60 W/350 ENG.


description:
CHEVROLET NO. 12043736, FOR 8 CYL., 305 CID ENGINE


description:
WIRE SETS, SPARK PLUG (BRAND LISTED OR EQUAL)


description:
WIRE, SPARK PLUG, (BRAND LISTED OR EQUAL)


description:
Lubricating System and Parts (See 060-42 for Filters and Class 075 for Equipment)


description:
1-1/2 IN. H X 3-1/2 IN. O.D. X 3-1/8 IN. I.D., STEEL, FERGUSON NO. A-23396 OR EQUAL


description:
CAPS, OIL FILLER - BRAND LISTED OR EQUAL


description:
GATES NO. 31066 - FOR GMC 6.2 LITER DIESEL


description:
CAPS, DUST, SLIP, METAL, DOME SHAPED, F/GREASE SEAL


description:
PLUGS, DRAIN, DIFFERENTIAL, 1/2 IN. MNPT X 1/2 IN. L, 3/8 IN. SQ. DRIVE HEAD


description:
WASHER, OIL PAN, COPPER, .032 X 5/8 IN. I.D. - LAWSON NO. 1706 OR EQUAL


description:
WINDOW KIT, GREASE CHECK, AXLE HUB/OILER, 2-3/4 IN. DIA., CLEAR PLASTIC, W/OIL LEVEL GAUGE PRINTED ON FACE INCLUDING GASKET AND VENT PLUG


description:
1/2 IN. -20 THREAD, HEX HEAD, W/NYLON GASKET


description:
1/2 IN. DOUBLE OVERSIZE, SELF-TAPPING W/ GASKET


description:
1/2 IN. - 20, TRIPLE OVERSIZE, SELF-TAPPING W/GASKET


description:
1/2 IN. MNPT X 1/2 IN. L, 3/8 IN. SQ. DRIVE HEAD, FOR DIFFERENTIAL - CHEVROLET NO. 25522466 OR EQUAL


description:
3/4 IN., SELF-TAPPING, OVERSIZE, W/WASHER


description:
14MM HWH X 1/2 IN. SAE THRD. X 3/4 IN. L


description:
14 MM HWH X 1/2 IN. SAE THREAD X 3/4 IN. L - CHEVROLET NO. 3921988 OR EQUAL


description:
1/8 IN. PRESSURE GAUGE INCL. FITTINGS, ADAPTER AND CONNECTORS


description:
Power and Drive Train Components and Parts


description:
BEARING CAP W/LOCK STRAP CONSTRUCTION FOR USE IN H.D. TRUCK AND INDUSTRIAL EQUIP. DRIVELINES, SPICER NO. 5-280X OR EQUAL


description:
BEARING CAP W/LOCK STRAP CONSTRUCTION FOR USE IN H.D. TRUCK AND INDUSTRIAL EQUIP. DRIVELINES, SPICER NO. 5-281X OR EQUAL


description:
FRONT, 1 SPEED, ROCKWELL NO. E-100 OR EQUAL, REBUILT


description:
REAR, 1 SPEED, ROCKWELL NO. E-100 OR EQUAL, REBUILT


description:
3 IN.O.D. X 2-7/8 IN.I.D. X 54 IN. L, STEEL


description:
U-JOINTS, AUTOMOTIVE - BRAND LISTED OR EQUAL


description:
SPICER NO. 5-3147X, FRONT/CENTER, DRIVE SHAFT


description:
1-1/2 IN. SNAP RING, BEARING DIA. .938 IN., CROSS LENGTH 2.080, TRUNNION DIA. .505, SPICER NO. 5170X OR EQUAL


description:
FRONT, FOR DODGE TRUCK, PRECISION NO. 315G OR EQUAL


description:
REAR, FOR CHEVROLET TRUCK, PRECISION NO. 534G OR EQUAL


description:
REAR, FOR DODGE TRUCK, PRECISION NO. 316 OR EQUAL


description:
ANTIFREEZE, AUTOMOTIVE, RECYCLED, 50/50 MIX


description:
AIR CONDITIONERS AND PARTS, CHRYSLER (ORIG. EQUIP.)


description:
CLUTCH CYCLE SWITCH - CHRYSLER NO. 4339463


description:
DRIER, PICKUP TRUCK - CHRYSLER NO. 4163951


description:
EXPANSION VALVE, H-TYPE - CHRYSLER NO. 3849240


description:
SWITCH, PRESSURE CUTOFF - CHRYSLER NO. A7249


description:
SWITCH, THERMOSTAT - CHRYSLER NO. 04205830


description:
SWITCH, THERMOSTAT - CHRYSLER NO. 3347940


description:
SWITCH, THERMOSTAT - CHRYSLER NO. 3847125


description:
ALTERNATORS AND COMPONENTS, CHRYSLER (ORIG. EQUIP.)


description:
PULLEY, DOUBLE GROOVE - CHRYSLER NO. 4057950


description:
BODY PARTS AND ACCESS., CHRYSLER (ORIG. EQUIP.)


description:
FILLER NECK HOUSING, 5 IN. W X 5-1/2 IN. H, A-SHAPED, 4-HOLE MOUNT, W/GASKET,  PLASTIC W/ALUM. BACKING, NO. 4279778


description:
FLOOR MAT, FRONT, BLUE, CONTOUR RUBBER, 19-1/2 IN. TOP, CHRYSLER NO. 4186373


description:
LICENSE MTG. KIT, CONTAINING SCREWS AND HARDWARE FOR MTG. LICENSE PLATES, CHRYSLER NO. 86157


description:
WINDOW REGULATOR, LEFT HAND - CHRYSLER NO. 3639075


description:
BRAKES AND PARTS, CHRYSLER (ORIG. EQUIP.)


description:
CALIPER PISTON, STEEL - CHRYSLER NO. 76018


description:
CYLINDER CLUTCH, MSTR. - CHRYSLER NO. FE-27129


description:
CYLINDER, WHEEL, REAR, CHRYSLER NO. 4761602


description:
CYLINDER KIT, WHEEL - CHRYSLER NO. 1843494


description:
CYLINDER KIT, WHEEL - CHRYSLER NO. 3780524


description:
CYLINDER KIT, WHEEL, 5/16 IN. - CHRYSLER NO. F59154


description:
CALIPER, REPAIR KIT, FRONT, CHRYSLER NO. 4746353


description:
PAD, BRAKE PEDAL, RUBBER, 7-1/4 IN. X 2-3/4 IN. L X 1/4 IN. THICK, SINGLE PEDAL F/AUTO. TRANS.


description:
PAD, DISC BRAKE, FRONT, CHRYSLER NO. 4874867


description:
PISTON, DISC BRAKE - CHRYSLER NO. 4186989


description:
PISTON KIT, CALIPER, DISC BRAKE, CHRYSLER NO. 5252614


description:
SHOE, 12 X 2-1/2 REAR - CHRYSLER NO. 4088904


description:
SHOE, 12 X 3 REAR - CHRYSLER NO. 4088907


description:
SHOE, 13 IN. X 2-1/2 IN., REAR, CHRYSLER NO. 4761600


description:
CLUTCH AND PARTS, CHRYSLER (ORIG. EQUIP.)


description:
ADAPTER, PRESSURE PLATE - CHRYSLER NO. 2402103


description:
PLATE, PRESSURE, 10 IN. - CHRYSLER NO. 2239683


description:
PLATE, PRESSURE, 12 IN. - CHRYSLER NO. 2231529


description:
COOLING SYSTEM COMP. AND PARTS, CHRYSLER (ORIG. EQUIP.)


description:
COCK, DRAIN, RADIATOR, 1/8 IN. MALE THREAD, CHRYSLER NO. 1686198


description:
SENDING UNIT, TEMPERATURE, 3/8 IN. DIA., 1-11/16 IN. L, SCREWS INTO ENGINE BLOCK, CHRYSLER NO. 4504202


description:
THERMOSTAT HOUSING - CHRYSLER NO. 4100490


description:
EMISSION SYSTEM COMP. AND PARTS, CHRYSLER (ORIG. EQUIP.)


description:
VALVE, EGR, EMISSION, W/VAC, CHRYSLER NO. 4287154 OR EQUAL


description:
EXHAUST SYSTEM AND PARTS, CHRYSLER (ORIG. EQUIP.)


description:
CATALYTIC CONVERTER - CHRYSLER NO. 4117419


description:
EXHAUST CROSSOVER PIPE - CHRYSLER NO. 4218183


description:
FUEL SYSTEMS AND PARTS, CHRYSLER (ORIG. EQUIP.)


description:
CAP, FUEL, 2-1/2 IN. O.D., NON-LOCKING, ROLLOVER, PRESS VACUUM, DEEP CAM - CHRYSLER NO. 2208538


description:
SENDING UNIT, FUEL TANK - CHRYSLER NO. 4051145


description:
SENDING UNIT, FUEL TANK - CHRYSLER NO. 4051889


description:
SPRING, CARB. RETURN - CHRYSLER NO. 3638582


description:
VACUUM VALVE, EGR AIR BREATHER, CHRYSLER NO. 3755711


description:
AIR COND. EXP. VALVE - CHRYSLER NO. 3846836


description:
AIR COND. EXP. VALVE - CHRYSLER NO. 3846834


description:
DRIER, AIR CONDITIONER - CHRYSLER NO. 3847083


description:
MANIFOLD, EXHAUST - CHRYSLER NO. 2465391


description:
PROPANE CONVERSION KIT, CHRYSLER NO. 53030600 OR EQUAL


description:
WATER OUTLET ELBOW, SMALL DIA, 6 AND 8 CYL ENGINES - CHRYSLER NO. 1947671


description:
WATER OUTLET ELBOW, LARGE DIA, 6 AND 8 CYL ENGINES - CHRYSLER NO. 3830016


description:
INDICATOR, GEAR SHIFT, FOR DODGE TRUCK, NO. 56006824


description:
TEMPERATURE - CHRYSLER NO. 4075146, 2 POLE, 12 VOLT


description:
HEATERS AND PARTS, CHRYSLER (ORIG. EQUIP.)


description:
CABLE, HEATER CONTROL, CHRYSLER NO. 03846922


description:
CABLE, COIL, HEATER - CHRYSLER NO. 4085896


description:
AIR CLEANER F/AIR DUCT - CHRYSLER NO. 4213690


description:
AIR CLEANER F/AIR DUCT - CHRYSLER NO. 4275566


description:
HORN AND PARTS - CHRYSLER (ORIG. EQUIP.)


description:
COMPUTER, IGNITION F/318-V8 ENG. - CHRYSLER NO. 4289813


description:
VOLTAGE REGULATOR - CHRYSLER NO. 2258413


description:
LAMP, LICENSE PLATE - CHRYSLER NO. 2507324


description:
LAMP, LICENSE PLATE - CHRYSLER NO. 936925


description:
LAMP, MAKER, AMBER, LEFT SIDE - CHRYSLER NO. 4076571


description:
LAMP, MARKER, AMBER, RIGHT SIDE - CHRYSLER NO. 4076570


description:
LAMP, STOP-TAIL-TURN LEFT SIDE - CHRYSLER NO. 4076575


description:
LENS, STOP-TAIL-TURN, RED, 11-3/4 IN. L X 8-7/8 IN., W, LEFT, 3 SECTION, SCREW MT. - CHRYSLER NO. 4357575


description:
LAMP, STOP-TAIL-TURN, RIGHT SIDE - CHRYSLER NO. 4169004


description:
LAMP, STOP-TAIL-TURN, RIGHT SIDE - CHRYSLER NO. 4076574


description:
LAMP, TAIL, LEFT REAR, CHRYSLER NO. 55054789


description:
LAMP, TAIL, RIGHT REAR, CHRYSLER NO. 55054788


description:
LAMP, TURN SIGNAL - CHRYSLER NO. 3620756


description:
LAMP, TURN SIGNAL - CHRYSLER NO. 3489500


description:
LENS, CLEARANCE MARKER - CHRYSLER NO. 3620707


description:
LENS, CLEARANCE MARKER - CHRYSLER NO. 3489895


description:
LENS, LICENSE PLATE - CHRYSLER NO. 3895966


description:
LENS, TAIL LIGHT, CLEAR - CHRYSLER NO. 3621893


description:
LENS, TAIL LIGHT, RED, LEFT SIDE - CHRYSLER NO. 4076689


description:
LENS, TAIL LIGHT, RED, RIGHT SIDE - CHRYSLER NO. 4076688


description:
LENS, TURN SIGNAL, AMBER - CHRYSLER NO. 2932990


description:
LUBRICATION PARTS AND COMP., CHRYSLER (ORIG. EQUIP.)


description:
SENDING UNIT, OIL - CHRYSLER NO. 4186352


description:
MIRRORS, PARTS AND ACCESS. - CHRYSLER (ORIG. EQUIP.)


description:
REAR VIEW, OUTSIDE, CHRYSLER NO. 04083557


description:
MOTORS AND PARTS, CHRYSLER (ORIG. EQUIP.)


description:
FLANGE, MOTOR MOUNT, CHRYSLER NO. 6021170


description:
MOTOR, WINDSHIELD WIPER - CHRYSLER NO. 4205998


description:
POWER STEERING COMPONENTS AND PARTS, CHRYSLER (ORIG. EQUIP.)


description:
BRACKET, 5/8 IN. THICK X 1 IN. W, L-SHAPED, 5/8 IN. HOLES ON EACH END, W/GREASE ZERT, STEEL, NO. 3496507


description:
POWER TRAIN COMPONENTS, CHRYSLER (ORIG. EQUIP.)


description:
U-JOINT W/GREASE FITTING - CHRYSLER NO. 4384514


description:
U-JOINT BOLT, STRAP-ON JOINT - CHRYSLER NO. 1939415


description:
U-JOINT DRIVE SHAFT - CHRYSLER NO. 2040231


description:
U-JOINT - REPAIR PKG. - CHRYSLER NO. 2852175


description:
POWER TAKE-OFFS, PARTS, AND ACCESSORIES, CHRYSLER (ORIG. EQUIP.)


description:
YOKE, SLIP, CAST STEEL, 4-3/4 IN. LONG NECK WITH SPLINE TEETH AND 4 IN. YOKE END - CHRYSLER NO. 2832393


description:
OIL, WHEET, FRONT, CHRYSLER NO. 52007661


description:
PUMP, POWER STEERING - CHRYSLER NO. 471267


description:
RETAINER F/TRANSMISSION - CHRYSLER NO. 2507999


description:
TRANSMISSION, INNER, F/TRANS. SHIFT LINK - CHRYSLER NO. 2466548


description:
TRANSMISSION, OUTER, F/TRANS. SHIFT LINK - CHRYSLER NO. 3878447


description:
SPEEDOMETERS, PARTS AND ACCESS. - CHRYSLER (ORIGINAL EQUIP.)


description:
SPEEDOMETER, MANUAL, CABLE OPERATED, 5 IN. ROUND FACE, 5-85 MPH, 0-99,999 MILES/ODOMETER - CHRYSLER NO. 4075318


description:
STARTERS AND PARTS, CHRYSLER (ORIG. EQUIP.)


description:
SOLENOID, THROTTLE - CHRYSLER NO. 5213345


description:
EGR TIME DELAY CONTROL - CHRYSLER NO. 4111828


description:
SENSOR, MAP, WORKS OFF VACUUM, READS CHNG. IN MANIFOLD - CHRYSLER NO. 5227351


description:
TEMPERATURE, WATER - CHRYSLER NO. 4221284


description:
TEMPERATURE SENDING - CHRYSLER NO. 3746524


description:
VACUUM, 6 PUSH BUTTON CONT. F/A.C. DEFROST AND HEATER - CHRYSLER NO. 3847742


description:
WHEELS AND AXLES AND PARTS: CHRYSLER (ORIG. EQUIP.)


description:
WHEEL BOLTS, LEFT - CHRYSLER NO. 1923409


description:
WHEEL BOLTS, RIGHT - CHRYSLER NO. 1923408


description:
WHEEL BOLTS, RIGHT - CHRYSLER NO. 1261180


description:
WHEEL BOLTS, RIGHT - CHRYSLER NO. D-1986


description:
WHEEL BOLTS, RIGHT - CHRYSLER NO. 5358 B


description:
WIRE, CABLE, TERMINALS, BATTERY: CHRYSLER (ORIG. EQUIP.)


description:
BATTERY HOLD DOWN BOLT, - 10 X 1/4 - CHRYSLER NO. 6029652


description:
CABLE, 2 SPEED SWITCH - CHRYSLER NO. 2448688


description:
AIR CONDITIONING AND HEATING PARTS AND ACCESSORIES (FORD ORIG. EQUIP.)


description:
CLUTCH, FAN, FOR VEHICLES EQUIPPED WITH 7.8L DIESEL ENGINES, NO. FOHZ-8A616F


description:
HEATER CONTROL CABLE, 1/4 IN. X 36 IN. - E1TZ-18518A


description:
HEATER CONTROL CABLE, 55 IN. L X 1/32 IN. DIA. - NO. E3TZ-18518B


description:
MOTOR, BLOWER, HEATER - NO. E2TZ-18527AMM410


description:
TEMP. CONTROL CABLE, PUSH-PULL - E0TZ-18518A


description:
ALIGNMENT PARTS AND ACCESS., FRONT END - FORD (ORIG. EQUIP.)


description:
END, TIE ROD, LEFT SIDE, 7-1/8 IN. L, L-SHAPED, SECOND END 2-1/2 IN. L, GREASE IS SELF CONTAINED


description:
SPINDLE NUT, SLOTTED, 1-1/2 IN. ASAE THREADED - D5HZ-3104A


description:
SPINDLE WASHER, FLAT, 1-1/2 IN. - D5HZ-1195C


description:
TIE ROD END, RIGHT SIDE, NO. D5TZ-3A130A


description:
TIE ROD END, RIGHT SIDE, NO. E4HZ-3A130B


description:
ALTERNATORS, ACCESS. AND PARTS - FORD (ORIG. EQUIP.)


description:
MOTOR, REAR AXLE, 2-SPEED, 1 SHAFT, 2 WIRE, 2 VOLT - B2Q-4100B


description:
MOTOR, AXLE SHIFT, 2-SPEED, 12 VOLT ELECTRIC


description:
SCREW ASSEMBLY, DIFFERENTIAL, FOR 2-SPEED SHIFT MOTOR


description:
SHAFT, AXLE, RIGHT SIDE, NO. E7HZ-4234-E


description:
BEARINGS AND PARTS - FORD (ORIG. EQUIP.)


description:
PILOT, CLUTCH ASSY., 1 IN. I.D., 1-1/4 IN. O.D., 7/16 IN. THICK - NO. 105CC


description:
BRACE, BUMPER, 9 IN. L, W/FOUR 1/2 IN. MTG. HOLES, BLACK, METAL, FOR LEFT SIDE OF FRONT BUMPER ON FORD TRUCK


description:
BRACE, BUMPER, 9 IN. L, W/FOUR 1/2 IN. MTG. HOLES, BLACK, METAL, FOR RIGHT SIDE OF FRONT BUMPER ON FORD TRUCK


description:
BUMPER, HOOD, RUBBER, 3 - SIDED, 2 IN. X 1-1/4 IN. EACH SIDE, W/ 2 IN. X 1-1/8 IN. STEEL BRACKET


description:
CLIP, RETAINER, COPPER, 1 IN. - C3AZ-6140B


description:
DOOR CHANNEL F/WINDOW GLASS - EOTZ-10222A01A


description:
DOOR HANDLE, INSIDE, DRIVER'S SIDE, 5-1/2 IN. L X 1 IN. W, WITH 1/4 IN. MTG. HOLE, NO. E7TZ-1522601


description:
DOOR STRIKER, 7/16 IN. X 2 IN., NC-12 THREAD, W/ 1 IN. WASHER ON U-SHAPED HOUSING - NO. E7AZ-5422008


description:
GROMMET, NYLON, BLUE, 7/16 IN. I.D. X 3/4 IN. O.D. - EOSZ-7341A


description:
HINGE, DOOR, LOWER, TRUCK - E3BZ-3622800A


description:
HINGE, DOOR, UPPER, TRUCK - E8TZ-1522810A


description:
NUT, RETAINER, 2 LUG, CHROME, 3/4 IN. DIA X 1/2 IN. I.D. X 1/4 IN. THICK - CITZ-9A389A


description:
PEDAL PAD, 3 IN. X 3 IN. X 1/2 IN. THICK, RUBBER, FOR MODEL F-800 TRUCK,  NO.  EOHZ-2457B


description:
SEAT BACK FRAME W/O CUSHION - E7TZ-156108B


description:
WEATHERSTRIP, DOOR, 7/8 IN. DIA. X 13 FT. L X 7/8 IN. THICK, HOLLOW BLACK FOAM, NO. FOTZ-1520708A


description:
WINDOW HANDLE, CHROME WITH HARDWARE - D4TZ-1023342A


description:
WINDOW HANDLE, PLASTIC, NO. E6DZ-5423342A


description:
WINDOW REGULATOR, RIGHT HAND - NO. E3TZ-1023200C


description:
BOLTS AND NUTS, WHEEL - FORD (ORIG. EQUIP.)


description:
BRAKE ACCESS. AND PARTS - FORD (ORIG. EQUIP.)


description:
CAP, BRAKE FLUID, 1-3/4 IN. DIA X 3/4 IN., ALUMINUM, FOR HYD. BRAKE SYSTEM


description:
CYLINDER, PARKING BRAKE, FOR F700 TRUCK, NO. E4HZ-2B107-B


description:
CYLINDER, WHEEL, RT. FRONT - NO. C8TZ-2261C


description:
CYLINDER, WHEEL, RT. FRONT - NO. DOTZ-2061A


description:
CYLINDER, WHEEL, RT. FRONT - NO. DOTZ-2062A


description:
CYLINDER, WHEEL, 15/16 IN., RIGHT REAR, D1AZ2261A


description:
CYLINDER, WHEEL, 15/16 IN., LEFT REAR, D1AZ2262A


description:
CYLINDER, WHEEL, FOR F700 TRUCK, NO. 34HZ-2B107D


description:
EXPANDER, PARKING BRAKE, FOR F700 TRUCK, NO. E4HZ-2C198F


description:
FILTER, BRAKE BOOSTER, 5/8 IN. I.D. X 3-1/8 IN. H., W/ 3/4 IN. STEM - D4TZ-2363A


description:
FLUID, BRAKE, HYD., MINERAL BASE, FLASH PT. 199C-IQM6C34A


description:
JUNCTION BLOCK, BRAKE LINE - EOHZ-2B357A


description:
KIT, REPAIR, BRAKE, DISC, CALIPER, E7TZ2120A


description:
PAD, BRAKE PEDAL, EMERGENCY, 3 IN. X 3 IN. X 3/4 IN. THICK, RUBBER, FOR MODEL F-800 TRUCK, NO. C7TZ-2457B


description:
RESERVOIR, BRAKE, OVERFLOW FROM MSTR. CYL. - E4HZ-2N148E


description:
SHOE, BRAKE, REAR, 11/32 IN. X 2-1/4 IN. - F3UZ2200A


description:
VALVE, CHECK, PLASTIC, W/2-1/2 IN. HOSE NIPPLES, FOR BRAKE BOOSTER - C3TZ-2365A


description:
VALVE, PARKING BRAKE, FOR F700 TRUCK, NO. E5HZ-2K806C


description:
CLUTCH ACCESS. AND PARTS - FORD (ORIG. EQUIP.)


description:
PLATE, PRESSURE, 13 IN. CLUTCH - C4TZ-7563A


description:
PLATE, PRESSURE, 10 IN. CLUTCH - EOTZ-7563D


description:
COOLING SYSTEM ACCESS. AND PARTS - FORD (ORIG. EQUIP.)


description:
COVER, RADIATOR, VINYL COVER W/SNAP-ON HARDWARE - NO. WF1874


description:
FAN PULLEY AND BRACKET (300 C.I.D.), NO. E5JL-8625BA


description:
RESERVOIR, RADIATOR OVERFLOW - E5HZ-8A080B


description:
SEPARATOR ELEMENT, WATER, 11-1/2 IN. L, W/TWO 1-3/16 IN. SENSOR POLES, 3/8 IN. SHROUD AROUND 2 WIRES, SCREWS INTO SEPARATOR - NO. E7HZ-9J308A


description:
DRIVE TRAIN AND REAR END ACCESS. AND PARTS - FORD (ORIG. EQUIP.)


description:
BOLT, U-JOINT, 8 MM X .25 MM FINE THREAD, GRADE 8.5, HEX HEAD - 3828845


description:
PULLEY, CRANKSHAFT, 4 GROOVES FOR 2 IN. SHAFT - NO. 8921002


description:
SHIFT AXLE ASSY. COMP. F/2-SPEED ELEC. REAR END - E5HZ-406ZA


description:
U-JOINT BOLT, STRAP ON TYPE - D8UZ-4529E


description:
ELECTRICAL ACCESS. AND PARTS - FORD (ORIG. EQUIP.)


description:
CIRCUIT BOARD WIRE HARNESS CLIP-ON PLUG - D3AZ-14489C


description:
CIRCUIT BREAKER, 45 AMP, THREADED POST - B7A-14526C


description:
CIRCUIT BREAKER, 25 AMP, THREADED POST - D5HZ-14526B


description:
DIAPHRAGM, DISTRIBUTOR, VACUUM ACTIVATED, SINGLE PORT AND HOOK-UP - D2ZZ-12370A


description:
DIAPHRAGM, DISTRIBUTOR, VACUUM ACTIVATED, SINGLE PORT AND HOOK-UP - D5AZ-12370B


description:
ENGINE WIRING HARNESS ASSY. - E0HZ-14398A


description:
HORN BUTTON ASSY., INCLS. HORN PAD, INSULATOR, CAM RING, WIRE ASSY., 3 BUSHINGS, 2 SCREWS AND INSTRUCTION SHEET, NO. D9HZ-13A805A


description:
INST. PANEL WIRING HARNESS ASSY. - E2HZ-14289A


description:
PULLEY, ALTERNATOR, DOUBLE GROOVE, FOR 7/8 IN. SHAFT - E2HZ-10344A


description:
REGULATOR, ALTERNATOR, 4 TERMINAL - E2PZ-10316A


description:
RESISTOR, GAUGE, 4 TERM/BLADE, SPRING TYPE - D7DZ-18591A


description:
TWO-SPEED MTR. SWITCH WIRING HARNESS - D6HZ-14668B


description:
ENGINES, ACCESS. AND PARTS - FORD (ORIG. EQUIP.)


description:
FILTER, VENT, FOR ROCKER ARM COVER ON 7.8 LTR DIESEL ENGINE, NO. E6HZ-6A811A


description:
KEY, KEEPER, 1-3/8 IN. L X 3/16 IN. X 1/8 IN., STEEL


description:
KEY, KEEPER, 1-1/2 IN. L X 5/32 IN. X 1/4 IN., STEEL


description:
SPARK ARRESTOR, 3/4 IN. X 3/4 IN. HOSE FITTINGS X 3 IN. L, FOR CRANKCASE EMISSION ON FRESH AIR HOSE - D7T-86A827A


description:
STUD, CYLINDER HEAD, 2 IN. L X 3/8 IN. NC X 3/8 IN. NF


description:
VALVE ASSY., EXHAUST, SOLENOID VAC UNIT - D5TZ-9D474F


description:
VALVE, VACUUM, EGR SOLENOID, 2 HOLE MT., 2 TERM. PLUG, 2 VACUUM NIPPLE CONN. - NO. D5TZ-9D474F


description:
EXHAUST SYSTEM ACCESS AND PARTS - FORD (ORIG. EQUIP.)


description:
FILTERS AND EMISSION CONT. SYS. ACCESS. AND PARTS - FORD (ORIG. EQUIP.)


description:
AIR CLEANER/EMISSON CONTROL ADAPTER, NO. D3JL-9B663A


description:
AIR CLEANER HOUSING ADAPTER - E2HZ-9E622A


description:
AIR CLEANER RET. BREATHER CLIP - D1AZ-9E628A


description:
DIFFERENTIAL, METAL, TOP 1 IN. DIA X 1 IN. H, BOTTOM 3/8 IN. I.D. X 3/4 IN.H


description:
FILTER REPAIR KIT, FOR 8.2 DIESEL POWER STEERING - NO. E1HZ-3C602A


description:
FUEL FILTER, METAL, IN-LINE, 3/8 IN. IN/OUT - E3FZ-9155F


description:
GROMMET, EMISSION CONTROL SYS. 3/4 IN. I.D. X 1-1/2 IN. O.D. X 5/8 IN. THICK, RUBBER GASKET - NO. C8SZ-6A892A


description:
RESTRICTION INDICATOR, AIR FILTER, 1/8 IN. FNPT, 0-25 IN. SETTING, W/RESET BUTTON - NO. E0HZ-9N622B


description:
VALVE, DIVERTER, EXH. EMISSION - E1TZ-9B289D


description:
FUEL SYSTEM ACCESS. AND PARTS - FORD (ORIG. EQUIP.)


description:
BOOT, THROTTLE SHAFT, LEFT HAND - NO. 8924642


description:
CAP, FUEL, METAL, ANTI-SURGE, VENTED - C5AZ-9030A


description:
CLIP, LINKAGE, STD SIZE, SPRING STEEL, FOR CARBURETOR THROTTLE ROD - B2A-9805B


description:
NUT, BRASS, FLARE, 7/16 IN. MPT - O.D. X 5/16 IN. I.D., W/ 1/2 IN. HH, FOR FUEL LINE


description:
POSITIVE CRANKCASE VALVE (PCV) - D9FZ-6A666B


description:
SOLENOID ASSY, FUEL, PLASTIC, 2 LEAD (RED/WHITE), FOR 3/8 IN. I.D. HOSE


description:
SOLENOID KIT, FUEL CUT-OFF, INCLUDES SOLENOID, BALL JOINT, REPLACEMENT PLUG AND ONE PACKAGE HARDWARE, NO. F1HZ9A594A


description:
SPRING, THROTTLE RETURN, 3 IN. X 1/2 IN. - C7AZ-9737C


description:
SPRING, THROTTLE RETURN, ORANGE CODED, W/LOOP AND HOOK ENDS


description:
VALVE, SHUT-OFF, MANUAL, 3-POSITION, FOR DUAL TANKS


description:
GASKETS, AUTOMOTIVE - FORD (ORIG. EQUIP.)


description:
DRAIN PLUG, NYLON, 22 MM X 1/2 IN. I.D. X 1/8 IN. THICK - C2OZ-6734A


description:
EXHAUST CROSS-OVER, METAL - NO. E7HZ-6N862B


description:
HOUSING, METALLIC CARBON, BELL TO OIL PAN - NO. 8920091


description:
HYD. LIFT, COVER CTR. HOUSING - C5NN-A967B


description:
OIL PAN, RED RUBBER, 16-3/4 IN. W, 24 IN. L, 13 MTG. HOLES, FOR 8.2 DIESEL ENGINE - NO. 8922786


description:
THERMOSTAT, 1-27/32 IN. I.D. - E5AZ-8255A


description:
THERMOSTAT, DOUBLE TYPE, FOR 8.2 DIESEL - D9TZ-9447E


description:
AMP, BATTERY CHARGE INDICATOR, BLACK FACE, 2-1/8 IN. DIA, DASH MT - EOTZ-10850A


description:
HEATER, ELECTRONIC, SINGLE SCREW BRASS POST, 1-1/2 IN. L X 3/8 IN. MPT W/NO. 8 SCREW - DOTZ-10884A


description:
OIL PRESSURE, 1-13/16 IN. DIA., 3/4 IN. THICK - NO. E0TZ-9273A


description:
SENSOR, TACHOMETER, 53 IN. L W/PLUG END AND BELL HOUSING FTG. END, NO. E0HZ-17B384A


description:
TEMPERATURE, C-H, 2 STUD MT - DOHZ-10883C


description:
TEMPERATURE, SPADE TERM., 1-1/2 IN. L X 3/8 IN. MPT, W/NO. 8 SCREW - C4HH-10884A


description:
TEMPERATURE, 2 IN. LONG BRASS W/ 1/2 IN. MPT AND NO. 10 SINGLE SCREW TERM. - B7A-10884A


description:
TEE, VACUUM, 3-WAY, PLASTIC, PUSH/LOCK MT - DOSZ-17A601A


description:
HYDRAULIC PARTS AND ACCESS. - FORD (ORIG. EQUIP.)


description:
CONDENSER, SINGLE WIRE W/ 2 PRONG TERM. AND MTG. BRACKET - NO. FE12300A


description:
CYLINDER, IGNITION, WITH KEY, NO. E6HZ-11582A


description:
INTERIOR TRIM ITEMS AND PARTS - FORD (ORIG. EQUIP)


description:
ARM, VISOR, 16 IN. L W/MOUNTING BRACKET, METAL, NO. EOTZ-1004144


description:
LAMPS, LENS, AND FLASHERS, AUTOMOTIVE - FORD (ORIG. EQUIP.)


description:
LAMP ASSY., CLEARANCE, AMBER, L.F. FENDER - E0TZ-15A201B


description:
LAMP ASSY., CLEARANCE, AMBER, R.F. FENDER - E0TZ-15A201A


description:
LAMP ASSY., PARKING, AMBER - E1TZ-13200A


description:
LAMP ASSY., TAIL LIGHT, LEFT SIDE - E4TZ-13405B


description:
LAMP ASSY., TAIL LIGHT, RIGHT SIDE - E4TZ-13404B


description:
LAMP SOCKET ASSY. (SIDE MARKER) D0DZ-15A434B


description:
LAMP, STOP-TAIL-TURN, RED/AMBER - D3TZ-13368A


description:
LAMP, TAIL AND TURN, RED/AMBER - D3TZ-1368B


description:
LENS, CAB LIGHT, SNAP-ON, WHITE, 4 IN. X 2-1/2 IN. - D9AZ-13783C


description:
SOCKET, LAMP, PLASTIC, (BACK-UP, TURN AND PARK) - DIFZ-13234A


description:
LUBRICATION ACCESS. AND PARTS - FORD (ORIG. EQUIP.)


description:
SENDING UNIT, OIL, 1-3/4 IN. DIA. X 3-7/16 IN. L, SINGLE POLE END AND 1/2 IN. DIA. LOOP AND HDWE. FOR BLOCK - NO. E4ZZ-9278A


description:
POWER STEERING COMPONENTS AND PARTS - FORD (ORIG. EQUIP.)


description:
TUBE, DIP STICK, 3/8 IN. O.D. X 29 IN. LONG, METAL - C4TZ-6754B


description:
POWER TAKE OFF (PTO) ACCESS. AND PARTS - FORD (ORIG. EQUIP.)


description:
VALVE ADAPTER, STEERING GEAR - C9NN-3747A


description:
SPEEDOMETERS, PARTS, AND ACCESS - FORD (ORIG EQUIP)


description:
COMPENSATOR, STRAIGHT SHIFT ADAPTER, FCR RATIO TO 2-SPEED REAR AXLE - E2HZ-17K302AD


description:
TRANSDUCER, SPEEDOMETER, 2 PULSE PER REV., 12 VOLT, WITH AUTOMATIC TRANSMISSION, AG-CHEM KIT NO. 709205 OR EQUAL


description:
STARTERS, ACCESS. AND PARTS - FORD (ORIG. EQUIP.)


description:
STEERING COMPONENTS AND ACCESS - FORD (ORIG EQUIP)


description:
BUSHING, SHIFT BALL, NYLON, FOR MANUAL SHIFT STEERING COLUMN - C1AA-7543A


description:
PULLEY, STEERING, 7 IN. O.D., 5-1/2 IN. I.D., 1-9/16 IN. W, WITH DOUBLE V-BELTS - NO. DOHZ-3A733A


description:
SEAL KIT, POWER STEERING, CONTAINS EIGHT O-RINGS, 3 SEALS, AND 2 RUBBER BOOTS, NO. E9HZ-3L548B


description:
WHEEL, STEERING, 18 IN. DIA., HARD RUBBER - NO. E6HZ-36008


description:
SUSPENSION SYSTEM COMPONENTS AND PARTS - FORD (ORIG. EQUIPMENT)


description:
BRACKET, SUPPORT, SPRING HANGER, 6 IN. L, ALL STEEL W/5 BOLT HOLES - NO. E7HZ-5340B


description:
SWITCHES, AUTOMOTIVE - FORD (ORIG. EQUIP.)


description:
BACK-UP LIGHT SWITCH, 2 PRONG, PLUG-IN - D0TZ-15520C


description:
FUEL, TANK SWITCH, 2 POSITION, FOR DUAL TANKS - COTF-9A050A


description:
TRANSMISSIONS, ACCESS., AND PARTS - FORD (ORIG. EQUIP.)


description:
BOOT ASSY., SHIFT, RUBBER, 8-1/2 IN. X 9-1/2 IN., 4 HOLE W/METAL BASE FOR MOUNTING TO FLOORBOARD, NO. E4HZ-7277B


description:
BOOT, SHIFT LEVER, BLACK, BOLT-ON - D2KZ-7277A


description:
BOOT, SHIFT LEVER, RUBBER, 9-1/2 IN. X 10-3/4 IN., 6 HOLE W/METAL BASE FOR MTG.NO. E9HZ-7277A


description:
TRANSMISSION, 4 SPEED (NEW PROCESS 435) - E4HZ-7004CA


description:
TRIM AND ACCESSORY ITEMS, INTERIOR AND EXTERIOR - FORD (ORIG. EQUIP.)


description:
FLOOR MAT, FULL FRONT, RUBBER W/BACKING -E3TZ-1013010B8A


description:
FLOOR MAT, FULL FRONT, BLACK, RUBBER, 30 IN. X 70 IN. - E0TZ-6013010A1A


description:
HEADLIGHT TRIM, 6-1/8 IN. H X 8-3/4 IN. L, LEFT SIDE, PLASTIC, NO. E0TZ-13064C


description:
HEADLIGHT TRIM, 6-1/8 IN. H X 8-3/8 IN. L, RIGHT SIDE, TRUCK - E0TZ-13064D


description:
SUN VISOR, DRIVERS, TAN - E6TZ-1504104A5U


description:
SUN VISOR BRACKET, DRIVERS - E0TZ-1004144A


description:
WHEELS, ACCESS., AND PARTS - FORD (ORIG. EQUIP.)


description:
ADAPTER, STUD, WEDGE, DRIVE FLANGE, PG 15-72


description:
BOLT, LUG, FRONT WHEEL, RIGHT HAND, 3/4 IN. X 3-1/2 IN. L - NO. D8HZ-1108A


description:
BOLT, LUG, FRONT WHEEL, LEFT HAND, 3/4 IN. X 3-1/2 IN. L - NO. D8HZ-1108B


description:
NUT, 9/16 IN. BLACK, RIGHT - 11 THREAD - E4TZ-1012A


description:
NUT, LUG, 9/16 IN.-18 THREAD, OUTER, RIGHT HAND - C7TZ-1120A


description:
NUT, LUG, 3/4 IN.-16 THREAD, RIGHT HAND, OUTER, F/BUDD WHEELS - BB1120A


description:
NUT, LUG, 3/4 IN.-16 THREAD, LEFT HAND, OUTER, F/BUDD WHEELS - BB1121A


description:
NUT, LUG, 1-1/8 IN.-16 THREAD, OUTER, LEFT HAND - BB-1135


description:
STUD, 3/4 IN.-16 THREAD, RIGHT HAND, FRONT - C4TZ-1107E


description:
STUD, 3/4 IN.-16 THREAD, LEFT HAND, DRIVE-IN - C4TZ-1107F


description:
STUD BOLT, R.H. FRONT WHEEL - C5NN-1107F


description:
WEDGE, DRIVE, FLANGE, 9/16 IN. I.D. X 3/4 IN. O.D. X 7/32 IN. THICK, SPLIT TEE, FOR WHEEL DOWEL


description:
WHEEL, SEDAN, 15 X 6, 5 HOLE - E7TZ-1015C


description:
WHEEL, TRUCK, 7.50 X 22.5, 10 HOLE BUDD - D4HZ-1015C


description:
WINDSHIELD WIPER PARTS AND ACCESSORIES, FORD (ORIG. EQUIP.)


description:
ARM, WINDSHIELD WIPER, 18 IN. L X 1 IN. W, BLACK METAL, 2/PACKAGE, NO. 20Y17528A


description:
MOTOR, WINDSHIELD WIPER, 2 SPEED, 2 PLUG, 3 BOLT HOLE PATTERN, NO. 37TZ-17508A


description:
PUMP, WINDSHIELD WASHER, INLET 11/16 IN. DIA., OUTLET 1/4 IN. DIA., 12 VOLT, 2 POLE MALE PLUG - NO. E4TZ-17664A


description:
REFILL, WINDSHIELD WIPER BLADE - D1AZ-17593A


description:
RESERVOIR, WINDSHIELD WASHER, 2 QT., PLASTIC, NO. E4UZ-17618A


description:
RESERVOIR, WINDSHIELD WASHER, 4-1/2 QT., PLASTIC, NO. E4HZ-17618B


description:
AIR CONDITIONING ACCESS. AND PARTS - CHEVROLET (O.E.M.)


description:
LIMITER, 3 PRONG, BLADE TYPE, FOR HI-LO SWITCH


description:
STUD, COMPRESSOR, 5/16 IN. X 7/16 IN. NC THREADED 5/8 IN. CENTER NUT - NO. 2036362


description:
ALIGNMENT PARTS AND ACCESS. (FRONT END) - CHEVROLET (O.E.M.)


description:
ALIGNMENT KIT, INCL. UPPER CONTROL ARM, ADJ. CAMS, BOLTS & NUTS FOR 1988-89PICKUPS - NO. 15654867


description:
ALTERNATORS, PARTS AND ACCESS. - CHEVROLET/GENERAL MOTORS (O.E.M.)


description:
BOLT, STUD, 3/8 IN. X 1 IN. MTD. ON 3/8 IN. X 2-1/4 IN. HEX HD. BOLT - NO. 14029009


description:
AXLES, ACCESS. AND PARTS - CHEVROLET (O.E.M.)


description:
BREATHER, REAR AXLE AIR VENT - NO. 3766380


description:
GEAR, REAR, 16 TOOTH, 29 SPLINE - NO. 359359


description:
INSULATOR, BUSHING, FOR AXLE, NYLON, 6 MM DIA POST AND 18 MM DIA INSULATOR ON 3/8 IN. DIA BASE


description:
LINK, DRAG, 17.96 IN. L, 7/8 IN. BALL STUD ON EACH END, FOR C-60 AND C-70 TRUCKS W/9,000 LB. FRONT AXLE, NO. 12549180


description:
MOTOR, TWO SPEED, REAR AXLE - NO. 15511677


description:
MOTOR, TWO SPEED, SHIFT (EATON NO. 470),  NO. 15520136


description:
MOTOR, TWO SPEED, REAR AXLE - NO. 3963986


description:
STUD, AXLE, 1/2 IN. X 20-13 X 2-7/8 IN., W/ 7/8 IN. NC AND 1 IN. NF THREAD


description:
PILOT CLUTCH, STEEL, 2 IN DIA. X 1 IN. BORE X 9/16 IN. THICK, NEOPRENE, SEALED - NO. 12334389


description:
SPACER, 1 IN. I.D. X 1-3/8 IN. O.D., FOR STEERING GEAR BOX


description:
TRANSMISSION RETAINER, FOR FULLER 6-SPEED TRANSMISSION FRONT RETAINER CAP -NO. 15578546


description:
BODY PARTS, TRIM AND ACCESS. - CHEVROLET (O.E.M.)


description:
ARM REST, 16-3/8 IN. L X 2-1/2 IN. W X 2-1/4 IN. H (L-SHAPED) VINYL, METAL BACKED, 2-HOLE MT. - NO. 543010002


description:
BOLT, CARRIAGE, 3/8 IN. X 1-1/8 IN., GR. 8 DRILLED FOR COTTER PIN


description:
BOLT, HEX HEAD, 18 MM HH, 4 IN. LONG X 3/8 IN. SHOULDER, W/ 7/16 IN. NC THREAD


description:
BOLT, SPACER, NYLON, 3/4 IN. HH X 1-5/8 IN. LONG, W/ 7/8 IN. X 1/4 IN. DIA THREAD END


description:
CABLE, HOOD RELEASE, 6 FT. L W/BLACK PLASTIC HANDLE


description:
CASE ASSEMBLY, LOCK, GLOVE BOX, NO. 14044471


description:
CLIP, RETAINER, 1/2 IN. WIDE, U-SHAPED, METAL


description:
CLIP, SPRING, RETAINER W/O HOOK ENDS, FOR WINDOW REGULATOR - NO. 4168122


description:
CONTROL, DOOR RELEASE, 3-WAY BKT W/ 1/4 IN. STUD HOLES AND 2 IN. LEVER ON PIVOT, METAL, FOR LEFT SIDE


description:
COVER, INSTRUMENT PANEL, FOR CHEV. PICKUP, PLASTIC, 1-1/2 IN. L X 1 IN. W, GRAY, NO. 15613083


description:
COVER, INSTRUMENT PANEL, FOR CHEV. PICKUP, PLASTIC, 1-3/4 IN. L X 1 IN. W, GRAY, NO. 15613084


description:
COVER, TAILGATE LATCH, BEZEL, PLASTIC, 6-3/4 IN. X 3-1/2 IN., SNAP-ON, FOR MODEL C1500 TRUCK, NO. 15569326


description:
CYLINDER, LOCK, FOR GLOVE BOX, NO. 12507441


description:
CYLINDER, LOCK, FOR SPARE TIRE BRACKET - NO. 3912416


description:
DOOR BRACKET, METAL, 3 IN. L X 1 IN. W X 1-1/4 IN. H, W/TWO 1/4 IN. THREAD MTG. HOLES - NO. 502970002


description:
DOOR BRACKET PIN, ALUMINUM, 1/4 IN. DIA. X 5/8 IN. L W/O COTTER PIN, W/TWO 1/4 IN. THREAD MTG. HOLES - NO. 502820001


description:
DOOR HANDLE, OUTSIDE LEFT - NO. 15968163


description:
DOOR HANDLE, OUTSIDE LEFT, CHROME FINISH - NO. 15686155


description:
DOOR LATCH STRIKER, 2 IN. WIDE W/ 1/4 IN. SCREW HOLES FOR MTG - NO. 6274550


description:
DOOR LOCK KNOB, SCREW-ON TYPE, PLASTIC - NO.7591126


description:
DOOR LOCK KNOB, SNAP-ON, PUSH-PULL - NO. 9813799


description:
DOOR MOULDING, RUBBER WEATHERSTRIP, L.S. - NO. 15522764


description:
DOOR MOULDING, RUBBER WEATHERSTRIP, R.S. - NO. 15522765


description:
DOOR STOP, 5-1/2 IN. L X 1/2 IN. W, ONE END W/RUBBER STOP 1-1/16 IN. DIA. X3/8 IN. THICK - NO. 502830003


description:
DOOR STRAP, PULL, 15-3/8 IN. L X 1 IN. W, 2-HOLE MT. - NO. 540180005


description:
FRONT, WINTER, FOR 88-91 CHEV/GMC FULL SIZE 1/2 TON PICKUPS, NO. 10952072


description:
EMBLEM, CHEVROLET, PLASTIC, 10 IN., SNAP-ON - NO. 14051845


description:
EXCHUSION, FOR GLOVE BOX LOCK, NO. 3957093


description:
FLOOR MAT, BLACK, 20-1/2 IN. X 27-3/4 IN., CONTOUR RUBBER - NO. 998889


description:
GRILLE, TRUCK, 66 IN. L X 16 IN. W, PLASTIC FRONT PANEL, NO. 2001141


description:
GROMMET, RUBBER, WIRING HARNESS, 1/4 IN. - NO. 3975132


description:
HANDLE, CONTROL, STAINLESS STEEL, 8 IN. L, FOR HYDRAULIC SYSTEM ON CHEVROLET EJECTO DUMP TRUCK, CROSS NO. 420030 OR EQUAL


description:
HANDLE, TAILGATE, METAL, 6-3/4 IN. X 3-1/2 IN., FOR MODEL C1500 TRUCK, NO. 15606895


description:
HOOD LATCH, METAL, SPRING LOADED WITH HARDWARE - NO. 2411978


description:
MOUNT, HOOD, 4 IN. L X 2 IN. W X 3/16 IN. THICK, W/3/4 IN. CENTER HOLE, WHITE-VOLVO NO. 671333214 OR EQUAL


description:
MOUNT, HOOD, SIDE CRADLE, 3-3/4 IN. L X 1 IN. W X 7/16 IN. THICK, W/2-1/4 IN. MOUNTING SCREWS, WHITE-VOLVO NO. 671080015 OR EQUAL


description:
NUT, HEX HEAD, 3/4 IN. COUNTERSUNK - NO. 9420176


description:
NUT, LOCK, FOR SPARE TIRE BRACKET - NO. 3682846


description:
NUT, LOCK, FOR SPARE TIRE BRACKET - NO. 326928


description:
NUT, MOLDING, NYLON, SELF-RETAINING, FOR POP-IN 1/4 IN. OPENING


description:
PANEL, INSTRUMENT, 24 IN. X 8 IN., W/AIR VENT LEFT SIDE, BEZEL ASSY., PLASTIC, GRAY, FOR CHEV. PICKUP, NO. 15956796


description:
SCREW, HEADLIGHT, 1/4 IN. DIA X 2 IN., UNIVERSAL, PHILLIPS HEAD


description:
TUBE, AIR DUCT, 1-3/4 IN. X 15 IN., FLEX./CORR. - NO. 15520413


description:
VALVE KIT, AIR, PUSH/PULL TYPE, INCLS. AIR VALVE, 5 FT. OF 1/4 IN. AIR LINE, 2 CLAMPS, FERRULES, NUTS AND INSERTS, FOR AIR RIDE SEAT ON DUMP TRUCK, NO. 520395008


description:
WASHER, FIBER, 2 IN. O.D. X 3/4 IN. I.D. X 1/16 IN. THICK - NO. 821453


description:
WASHER, RETAINER, 3/16 IN. I.D. X 7/16 IN. O.D., PUSH-ON TYPE, BLACK, HOLDSON TRIM


description:
BRAKE PARTS AND ACCESS. - CHEVROLET (O.E.M.)


description:
ALARM, AIR PRESSURE, BUZZER TYPE, 12 VOLT, 2-PRONG, UNDER DASH MT., 1-7/16 IN. L X 1-13/16 IN. W X 7/8 IN. THICK - NO. V1110243


description:
BOLT, BLEEDER, 20 MM HEX NUT W/ 1-1/8 IN. THREAD


description:
CALIPER KIT, DISC BRAKE, FOR HEAVY DUTY BRAKE SYSTEMS,  NO. 18014746


description:
CALIPER KIT, DISC BRAKE, FRONT, NO. 18014749


description:
CALIPER REPAIR KIT, DISC BRAKE NO. - 14013017


description:
CAP, DUST COVER, FRONT WHEEL BRAKE, NO. 15972552


description:
KNOB, CONTROL, PARKING BRAKE, 1 IN. SQUARE, W/3/8 IN. MTG. HOLE FOR CABLE


description:
KNOB, CONTROL, TRAILER AIR SUPPLY, 1 IN. HEX., W/3/8 IN. MTG. HOLE FOR CABLE


description:
KNOB, LEVER, RUBBER, 2-3/8 IN. L, CONE SHAPED, 5/16 IN. MOUNTING HOLE, NO. 15533984


description:
LEVER, TRAILER BRAKE, CHROME, PREFORMED, 3/8 IN. DIA. X 5-1/2 IN. L, FOR MODEL 7000 GMC DUMP TRUCK W/8.2 L ENGINE, NO. 15533983


description:
NUT, BRAKE LINE, 1/4 IN., W/INVERTED FLAIR


description:
NUT, BRAKE LINE, 5/16 IN., W/INVERTED FLAIR


description:
PAD, BRAKE, DISC, FRONT, SEMI-METALIC, NO. 18025354


description:
PAD, BRAKE PEDAL, 2-1/2 IN. W X 5-1/2 IN. L X 1/2 IN. THICK, RUBBER, SNAP-ON   TYPE, NO. 15522095


description:
PAD SET, FOR C1500 SERIES TRUCK, WAGNER NO. MX7259D368 OR EQUAL


description:
VALVE, CHECK, WHITE PLASTIC, 3/8 IN. MTG HOLE, DUAL HOOK-UP - NO. 2013324


description:
VALVE, CHECK, 3/8 IN. MTG. HOLE, 3-WAY HOOK-UP, WHITE PLASTIC, FOR BRAKE BOOSTER


description:
VALVE, PARKING BRAKE, 3-19/32 IN. L, DASH MT., W/TWO 1/4 IN. AIR DELY., ONE1/8 IN. AIR SUPPLY AND 1/8 IN. AIR EXHAUST HOLES - NO. 288005


description:
DIPSTICK, 3/8 IN. LONG X 3/4 IN. O.D. X 1/2 IN. I.D., BLACK, RUBBER


description:
HORN, NYLON, W/3 PRESSURE POINT RINGS, GREEN - NO. 9740172


description:
CLUTCH PARTS AND ACCESS. - CHEVROLET (O.E.M.)


description:
CABLE, 6 FT. L, 3/8 IN. DIA., INSULATED, STRANDED


description:
CLIP, SPRING, 7/16 IN. X 1-1/4 IN. W/HOOK ENDS, STEEL, FOR CLUTCH PIV. BALL- NO. 3739164


description:
CLUTCH ASSY., INCL. PRESSURE PLATE AND CLUTCH DISC. - NO. 1076201


description:
CLUTCH PEDAL SAFETY SWITCH - NO. 14074333


description:
PLATE, 10 IN. SPLINE, 4 BUTTON, NO. 460588


description:
SPRING, CLUTCH PEDAL, 4 IN. L X 1 IN. DIA., 1/16 IN. DIA. WIRE W/HOOK ENDS - NO. 252090002


description:
COOLING SYSTEM PARTS AND ACCESS. - CHEVROLET (O.E.M.)


description:
ALARM, AIR PRESSURE AND COOLANT LEVEL, BUZZER TYPE, 12 VOLT, 6-PRONG, UNDER DASH MOUNT, 4 IN. L X 2-1/4 IN. W X 1-3/4 IN. THICK, NO. 15562973


description:
ALARM, AIR PRESSURE AND COOLANT LEVEL, BUZZER TYPE, 12 VOLT, 11-PRONG, UNDER DASH MOUNT, 4 IN. L X 2-1/4 IN. W X 1-3/4 IN. THICK, NO. 15520541


description:
CAP ASSY., COOLANT SYSTEM - NO. 14011345


description:
EMISSION CONTROL PARTS AND ACCESS. - CHEVROLET (O.E.M.)


description:
VALVE, EMISSION CONTROL, E.G.R., METAL, MOUNTED ON INTAKE MANIFOLD,  NO. 1708585517111403


description:
ELECTRICAL PARTS AND ACCESS. - CHEVROLET (O.E.M.)


description:
CABLE, TACHOMETER, SENDING, 9 IN. L, THREADS ONE END, PLUG OTHER END, SCREWS INTO BELL HOUSING - NO. 2062713


description:
ENGINES, PARTS AND ACCESS. - CHEVROLET (O.E.M.)


description:
GEAR, HYDRAULIC PUMP, 2 IN. LONG X 2-1/4 IN. O.D. W/SHAFT 7-1/4 IN. LONG X 1 IN. O.D., STEEL - NO. 17C1379


description:
GLOW PLUG FOR 6.2 DIESEL ENGINE - NO. 5613738


description:
MODULE, GLOW PLUG, FOR 6.2 DIESEL ENGINE - NO. 12088520


description:
MOUNT, ENGINE RAD, V8, 366  -  NO. 15502586


description:
NUT, HEAD BOLT, HI-BRASS, 3/8 IN. NC - NO. 838780


description:
PULLEY, CRANKSHAFT, 2 GROOVE, 6-3/4 IN. X 6-1/4 IN. X 1 IN. - NO. 10069912


description:
PULLEY, IDLER, 4-3/4 IN. WIDE W/5/8 IN. SHAFT, FOR 1/2 IN. V-BELT, NO. 2050481


description:
ROD ASSY., PUSH, FOR STANDARD 350 ENGINE - NO. 458605


description:
SCREW, END CAP, FOR HYDRAULIC PUMP, 1/4 IN. X 3/4 IN. THREAD, 1/4 IN. THICK HEAD W/PHILLIPS INSET,  NO. 3911433020


description:
TENSIONER, BELT, W/BELT PULLEY ATTACHED, NO. 10229114


description:
VALVE KEY, INTAKE AND EXHAUST - NO. 3947770


description:
EXHAUST SYSTEM ACCESS. AND PARTS - CHEVROLET (O.E.M.)


description:
FUEL SYSTEM PARTS AND ACCESS. - CHEVROLET (O.E.M.)


description:
CAP, FUEL, W/DIESEL ONLY - NO. 433010006


description:
CAP, FUEL, UNLEADED ONLY, - NO. 22518912


description:
CARBURETOR REPAIR KIT, TWO BARREL - NO. 966


description:
CARBURETOR REPAIR KIT, FOUR BARREL - NO. 1504


description:
CONNECTOR, VACUUM, 4-WAY TEE, THREE 3/8 IN. I.D. X 1/4 IN. I.D. HOSE NIPPLE, PLASTIC, FOR PCV VALVE, CARB., DIV. VALVE AND VALVE CANISTER - NO. 14056428


description:
FLOAT, CARBURETOR, PLASTIC, FOR ONE BARREL UNIT


description:
FLOAT, CARBURETOR, PLASTIC, FOR TWO BARREL LARGE BORE UNIT


description:
FLOAT, CARBURETOR, FOUR BARREL - NO. FL-8


description:
GROMMET, RUBBER, AIR FILTER TUBE - NO. 3982983


description:
GUIDE, THROTTLE STOP, BRASS, 3/8 IN. LONG X 5/32 IN. DIA, W/NO. 8 ADJ SCREW


description:
LINE, FUEL, 1/4 IN.O.D. X 3 FT. L, W/ 1/2 IN. COUPLING, HARD PLASTIC, TYPE 12-N24-ET, FOR MODEL 7000 TRUCK W/3116 CATERPILLAR ENGINE, CHEVROLET NO. 15633346


description:
SEALANT FOR FUEL PUMPS, SILICONE - NO. 1052366


description:
STRAINER, FUEL PUMP, ELECTRIC, IN TANK - NO. 25055460


description:
TUBE, TURBO CHARGER EXPANSION - NO. 8920280


description:
AIR CLEANER, PAPER, 5 IN. I.D., 5-1/2 IN. O.D., 3/16 IN. THICK - NO. 25511809


description:
AXLE COVER, 7-7/8 IN. O.D. X 5-13/16 IN. I.D. X 1/16 IN. THICK, 8 BOLT HOLES 7/16 IN. ROUND - NO. 2062065


description:
AXLE, FRONT, CORK, 6-1/8 IN. O.D. X 4-1/2 IN. I.D., SIX 5/16 IN. HOLES - NO. V8060085


description:
CARBURETOR, 3/8 IN. THICK X 5 IN. X 3-5/16 IN, W, BLACK FIBRE, W/FOUR 5/16 IN. HOLES, NO. 698476


description:
DRAIN PLUG, NYLON, 3/4 IN. O.D., 1/2 IN. I.D. X 1/8 IN. THICK


description:
ELEC. MOTOR FOR REAR AXLE - NO. 15511097


description:
FUEL PUMP, 2-3/8 IN. O.D. X 1-3/4 IN. I.D. X 1/8 IN. THICK, BLACK, RUBBER


description:
INSULATOR, FOR 2 BARREL, CARBURETOR, PAPER/ASBESTOS, 1/4 IN. THICK


description:
THERMOSTAT, PAPER, FOR 350 ENGINE - NO. 3705042


description:
THROTTLE BODY MOUNTING, INJECTION BASE, ASBESTOS - NO. 10129563


description:
THROTTLE BODY MOUNTING, PAPER, WAX COATED - NO. 10129564


description:
TRANSMISSION, FULLER 6-SPEED - NO. 15578517


description:
TRANSMISSION, FULLER 6-SPEED - NO. 2464166


description:
VALVE COVER, CORK, 7/18 IN. THICK, 19-1/2 IN. LONG X 4-11/16 IN. WIDE, WITH6 STUD HOLES - NO. 3933964


description:
VALVE COVER, FOR 8.2 DIESEL ENGINE - NO. 8926675


description:
TACHOMETER, ENGINE, 0-4000 R.P.M. W/FUEL GAUGE, 12 VOLT - NO. 250549448


description:
HORNS, ACCESS. AND PARTS - CHEVROLET (O.E.M.)


description:
SPACER, 2-1/2 IN. O.D., 1 IN. I.D., SPRING STEEL, MICRO THIN - NO. 14020811


description:
SPRING, HORN, BLACK, 1/64 IN. DIA WIRE, 1/2 IN. DIA X 1-1/8 IN. LONG COIL


description:
HEATERS, ACCESS. AND PARTS - CHEVROLET (O.E.M.)


description:
HEATER, BLOCK,  TEMRO NO. 220-3022 OR EQUAL


description:
IGNITION PARTS AND ACCESS. - CHEVROLET (O.E.M.)


description:
LAMPS, LENS AND PARTS - CHEVROLET (O.E.M.)


description:
HARNESS, TURN SIGNAL, DASH MT, FOR 1157A BULB, - NO. 1894851


description:
HOUSING, TAILLIGHT LENS, R.R. - NO. 5965772


description:
LAMP ASSY., STOP-TAIL-TURN - NO. 15563845


description:
LAMP ASSY., STOP-TAIL-TURN - NO. 15563846


description:
LENS, INDICATOR LIGHT, 5/8 IN. ROUND X 5/8 IN. H, RED, LOW OIL INDICATOR, FILLER CAN SYMBOL, PUSH-IN TYPE


description:
LENS, INDICATOR LIGHT, 5/8 IN. ROUND X 5/8 IN. H, RED, WATER TEMP. INDICATOR,  TEMP. GAUGE AND WATER SYMBOL, PUSH-IN TYPE


description:
LAMP, TURN SIGNAL,  DOMINION AUTO. NO. 70-6252 OR EQUAL


description:
LENS, INDICATOR LIGHT, 5/8 IN. ROUND X 5/8 IN. H BLUE, HIGH BEAM INDICATOR,W/ HEAD LIGHT SYMBOL, PUSH-IN TYPE


description:
LENS, INDICATOR LIGHT, 5/8 IN. ROUND X 5/8 IN. H, GREEN W/WHITE ARROW - NO.070790043


description:
LENS, INDICATOR LIGHT, 5/8 IN. ROUND X 5/8 IN. H, RED, LOW AIR INDICATOR - NO. 070790033


description:
LENS, INDICATOR LIGHT, 5/8 IN. ROUND X 5/8 IN. H, RED, DIFF. LOCK - NO. 070790031


description:
LENS, STOP - TAIL - TURN, RED W/CLEAR BACK-UP, WRAP AROUND, R-HAND - NO. 5965776


description:
LUBRICATION PARTS AND ACCESS., CHEVROLET (O.E.M.) (CHEVROLET OR EQUAL)


description:
CAP, END, SPOOL, PLASTIC, FOR HOIST HYD. PUMP - NO. 3911881072


description:
CAP, OIL FILLER, 2-1/4 IN. DIAMETER, TWIST-ON, FOR 8.2 DIESEL ENGINE, NO. 5108474


description:
DIP STICK, OIL, 21-1/2 IN. L, 1-1/4 IN. O.D. X 1 IN. I.D. RING SIZE - NO. 8920462ND


description:
GROMMET, OIL PLUG, 1-1/2 IN. O.D., 3/4 IN. I.D. X 5/8 IN. THICK, BLACK, RUBBER


description:
PLATE, END CAP, W/SEAL, PLASTIC, FOR HOIST HYD. PUMP - NO. 3084000102


description:
SENDER, OIL, 2 IN. DIA. X 3 IN. L, 1/8 IN. MPT W/MALE SPADE TERM., 100 P.S.I., NO. 15591104


description:
SENSOR, OIL (4.3 LITER ENGINE),  NO. 10137652


description:
POWER AND DRIVE TRAIN COMP. AND PARTS - CHEVROLET (O.E.M.)


description:
DRIVE SHAFT CENTER SUPPORT KIT  -  NO. 7830355


description:
POWER TAKE-OFF (P.T.O.) PARTS AND ACCESS. - CHEVROLET (O.E.M.)


description:
SPEEDOMETERS, PARTS AND ACCESS. - CHEVROLET (O.E.M.)


description:
ADAPTER, L SHAPED, MALE THREAD ON ONE END, FEMALE ON THE OTHER END, NO. 1565172


description:
ADAPTER, L SHAPED, MALE THREAD ON ONE END, FEMALE ON THE OTHER END, NO. 1565175


description:
ADAPTER, L SHAPED, MALE THREAD ON ONE END, FEMALE ON THE OTHER END, NO. 1565177


description:
GEAR, SPEEDOMETER, NYLON, 6/8 IN. DIA GEAR W/ 1-3/4 IN. POST


description:
HEAD, 3-3/4 IN. DIA., 2-13/16 IN. ROUND FACE, 12 VOLT, 0-80 MPH, W/ORANGE POINTER AND ODOMETER, ILLUMINATED, GMC NO. 3081014 (WHITE-VOLVO)


description:
HEAD, 5 IN. DIA., ROUND, BLACK FACE W/ORANGE POINTER, NO. 25052373


description:
TIP, SPEEDOMETER, 5/8 IN. LONG WITH 1/16 IN. I.D. FOR CABLE, WHITE PLASTIC - NO. 25032338


description:
HUB, FRONT, 1/2 IN. DIA., RUBBER, POP-IN TYPE


description:
HYDRAULIC, 1-5/8 IN. I.D. X 1 IN. I.D. X 5/16 IN. THICK - NO. W62494


description:
POWER STEERING SEAL KIT, UNIVERSAL, CONSISTS OF TWO END COVER SEALS, ONE O-RING, ONE RETAINER RING AND TWO OIL SEALS - NO. 2779


description:
POWER STEERING STUD, 3/8 IN. I.D., RUBBER - NO. 5681740


description:
REAR TRANSMISSION EXTENSION HOUSING, NO. 8623216


description:
SHAFT INPUT, FOR FULLER 6-SPEED TRANSMISSION - NO. 2011488


description:
STEERING GEAR SEAL KIT, INCLS. SEAL, WASHER, O-RING, NAP RING AND LUBRICANT


description:
STEERING GEAR SEAL KIT, OUTPUT SHAFT - NO. 7828565


description:
TRANSMISSION, 3-1/2 IN. O.D. X 7/16 IN. THICK - NO. 27293


description:
TRANSMISSION, REAR, 3-1/2 IN.O.D. X 2-1/2 IN.I.D., FOR EATON 5-SPEED, NO. 471271


description:
VALVE STEM, 3/16 IN. I.D. X DIA., 3/4 IN, DIA., BLACK RUBBER, NO. B-45264


description:
STARTERS, PARTS AND ACCESS. - CHEVROLET (O.E.M.)


description:
BOLT, STARTER, HEX HEAD, W/LOCK TAB, 5/16 IN. X 7/8 IN. LONG, NC


description:
BRACKET, STARTER SOLENOID, METAL, FITS C60 AND C70 TRUCKS


description:
SCREW, SOLENOID, NO. 10 , 6M NF X 1/2 IN. LONG, COUNTERSUNK PHILLIPS HEAD


description:
SOLENOID, ING. SWITCH STARTER, 4 STUD - NO. 1114537


description:
STEERING COMPONENTS, PARTS AND ACCESS. - CHEVROLET (O.E.M.)


description:
SEAL KIT, POWER STEERING, CONTAINS ASST. SIZES OF O-RINGS, TWO SNAP RINGS, ONE LOCKNUT, TWO SEALS AND PACKAGE OF GREASE, NO. 7832958


description:
STUD, PUMP, POWER STEERING, 3/8 IN. DIA. X 3/8 IN. X 1 IN., NC THREADS - NO. 5687796


description:
FLOW SWITCH, VACUUM BRAKE BOOSTER - NO. 18005544


description:
HEATER, VACUUM OPERATED, FOR EMISSION CONTROL SYS, FOR 16 IN. DIA SENSOR W/5/8 IN. THREAD


description:
LIGHT SWITCH, INTERIOR, 12 VOLT, 3 TERMINAL, MALE PLUG END W/SPRING LOADED BUTTON OTHER END, 1/2 IN. L, 2 IN. ; X 5/8 IN., MOUNTS IN CORNER OF DASH, NO. 15687039


description:
TEMPERATURE SENDING UNIT W/GAUGE, FOR GM MEDIUM DUTY TRUCKS - NO. 8993164


description:
TRANSMISSION, NEUTRAL SAFETY - NO. 23011922


description:
TRANSMISSION PARTS AND ACCESS. - CHEVROLET (O.E.M.)


description:
BOLT, TORQUE CONVERTER, HEX HD., BLACK STEEL, 3/8 IN. X 1/2 IN. W/ 5/8 IN. HH


description:
BOOT, SHIFT LEVER, RUBBER, STANDARD SINGLE HOLE


description:
INDICATOR ASSY., SHIFT, 3 IN. W X 1-1/4 IN. H X 1-3/4 IN. L, PLASTIC, DASH MT., PARK-REVERSE-NEUTRAL-OVERDRIVE-DRIVE-2ND-1ST,  NO. 16144035


description:
KNOB, SHIFT LEVER, 7/16 IN. I.D., BLACK, RUBBER, FOR AUTO SHIFT COLUMN LEVER


description:
PIN, SHIFTER ARM, NO. 10 SCREW DIA. X 1 IN. LONG


description:
PIN, SHIFTER ARM, NO. 10 SCREW DIA X 1-1/4 IN. LONG, W/ 5/16 IN. DIA HEAD


description:
SLEEVE, SHIFT LEVER, NYLON, 5/8 IN. LONG X 5/8 IN. O.D. X 1/2 IN. I.D.


description:
WHEELS, RIMS, ACCESS. AND PARTS - CHEVROLET (O.E.M.)


description:
BOLT, STUD, 5/16 IN. STUD X 3/8 IN. BOLT X 4 IN. LONG, STEEL - NO. 3937247


description:
BOLT, STUD, 3/8 IN. X 2-1/4 IN. NC THREAD ENDS, FOR MANIFOLD


description:
LOCK RING FOR 10:00-20 WHEEL - NO. 2485249


description:
WHEEL, 5 HOLE, 15 IN. X 7 IN., 4-3/4 IN. CENTERS, STEEL,  NO. 9591786


description:
WINDSHIELD WIPER/WASHER PARTS AND ACCESS. - CHEVROLET/GMC (O.E.M.)


description:
ARM, WIPER BLADE, STEEL, 24 IN. L, PUSH-ON TYPE, W/WASHER HOSE ATTACHED


description:
BLADE, WIPER, 24 IN., SLIDE-ON TYPE, METAL FRAME, BLACK


description:
BOTTLE, WASHER, 1-1/2 QT., PLASTIC - NO. 3990892


description:
NOZZLE, L SHAPED, 1-1/2 IN. H X 1/2 IN., ONE END TO RESERVOIR, OTHER TO HOSE ON WIPER, NO. 3081168


description:
PUMP, WINDSHIELD WASHER, 12 VOLT, W/INLET, 8 IN. L HOSE, STRAINER AND MTG. PLATE, 2 POLE MALE PLUG - NO. V1092820


description:
REPAIR KIT, WASHER, INCLS. RATCHET, WHEEL AND RING - NO. 4939314


description:
RESERVOIR, WINDSHIELD WASHER, 3 PINT, PLASTIC, WEDGE IN TYPE - NO. 3840083


description:
RESERVOIR, WINDSHIELD WASHER, 2-QUART, PLASTIC


description:
Replacement Parts for International Harvester


description:
ACCESSORY ITEMS, INTERNATIONAL HARVESTER (ORIG. EQUIP.)


description:
ALIGNMENT PARTS, FRONT END - INTERNATIONAL (ORIG. EQUIP.)


description:
ALTERNATORS, PARTS AND COMPONENTS - INTERNATIONAL (ORIG. EQUIP.)


description:
AXLES AND PARTS - INTERNATIONAL (ORIG. EQUIP.)


description:
AXLE, LEFT REAR, 44 IN. L, 8 HOLE PATTERN, 41 SPLINE - NO. 577504C1


description:
TWO-SPEED REAR AXLE MOTOR - NO. 597480C91


description:
TWO-SPEED MOTOR OVERHAUL KIT - NO. 220831R92


description:
BEARINGS, AUTOMOTIVE - INTERNATIONAL (ORIG. EQUIP.)


description:
BODY PARTS AND COMPONENTS, AUTOMOTIVE - INTERNATIONAL (ORIG. EQUIP.)


description:
WINDOW REGULATOR, APPROX. 7-3/4 IN. H X 4-1/4 IN. W, W/HAND CRANK, W/O HANDLE, DRIVER'S SIDE, METAL, 4 HOLE


description:
PIN, SPINDLE, FRONT, F1954,  NO. 468703C2


description:
SPACER, REFLECTOR, BLACK, PLASTIC, 2-5/8 IN. X 2-1/2 IN. OVAL-BEVELED, FOR LOWER FRONT FENDERS


description:
BRAKE PARTS AND COMPONENTS - INTERNATIONAL (ORIG. EQUIP.)


description:
MASTER CYLINDER REPAIR KIT - NO. FG33160


description:
MASTER CYLINDER REPAIR KIT - NO. 127104H1


description:
MASTER CYLINDER REPAIR KIT - NO. 461181R91


description:
SPRING, AIR BRAKE HOSE, UNIVERSAL, 24 IN. LONG, NO.995207R1


description:
VALVE, PARKING BRAKE, 1-3/4 IN. W X 2-1/8 IN. L X 1 IN., W/ 1/2 IN. I.D. HOLES FOR AIRLET AND OUTLET LINES, PULL KNOB - NO. 416646C93


description:
CLUTCH PARTS - INTERNATIONAL (ORIG. EQUIP.)


description:
PLATE, PRESSURE, 14 IN., PULL TYPE - NO. 469776C91


description:
PLATE, PRESSURE, 14 IN., PULL TYPE - NO. 501950C91


description:
COOLING SYSTEM PARTS, INTERNATIONAL (ORIGINAL EQUIPMENT)


description:
FAN CLUTCH, 7-1/4 IN. DIAMETER, 3-1/2 IN . THICK, FOR MODEL S-1700, 9.0 LITER TRUCK, NO. 489271C1


description:
GASKET SET, RADIATOR, FOR MODEL 2554 TRUCK WITH DIESEL ENGINE, NO. 478991C1


description:
KNOB, TEMPERATURE SELECTOR, 1-3/4 IN. DIA. X 13/16 IN. H, PLASTIC, NO. 1664768C93


description:
SELECTOR, TEMPERATURE, 2-1/2 IN. L X 1-1/4 IN. H, PLASTIC MOUNTS IN DASH, CONTROLS TEMPERATURE INSIDE VEHICLE, NO. 1664769C91


description:
DIAPHRAGMS - INTERNATIONAL (ORIG. EQUIP.)


description:
ELECTRICAL PARTS AND COMP. - INTERNATIONAL (ORIG. EQUIP.)


description:
BREAKER, 50 AMP, 6.9 ENGINE,  NO. 54872R1


description:
HORN CONTACT, 12 VOLT, 7 IN. L W/LOCKING CONN. ON SPRING, LOADED END, MTS. UNDER HORN PAD - NO. 470213C91


description:
LID, BATTERY BOX, METAL, CORRUGATED, 16-1/2 IN. W X 29-1/4 IN. L, L-SHAPED,W/O CATCH FOR STRAP - NO. 480090C3


description:
EMISSION CONTROL PARTS - INTERNATIONAL (ORIG. EQUIP.)


description:
ENGINE AND POWER TRAIN COMP. - INTERNATIONAL (ORIG. EQUIP.)


description:
GLOW PLUG CONTROL, 6.9  -  NO. 1811059C91


description:
GLOW PLUG CONTROL, FOR MODEL 4600 TRUCK W/7.3 DIESEL ENGINE,  NO. 1811059C92


description:
GLOW PLUG MODULE, FOR MODEL 4600 TRUCK W/7.3 DIESEL ENGINE,  NO. 1819649C1


description:
HEAD BOLT, 4 IN., HIGH GRADE - NO. 3055033R11


description:
OIL SENDING UNIT, 2 IN. DIA. X 3-1/2 IN. L, W/ 1/8 IN. NF THREADS, FOR MODEL 1850B 9 LITER ENGINE,  NO. 1513678C92


description:
PULLEY, IDLER, 3-1/2 IN. DIA. X 3/4 IN. SHAFT, NO. 473432R1


description:
EXHAUST SYSTEM PARTS - INTERNATIONAL (ORIG. EQUIP.)


description:
BOLT, EXHAUST MANIFOLD, 3/8 IN. X 2-1/4 IN. L, HIGH HEAT, NO. 94122R1


description:
ELBOW, EXHAUST, 90 DEG., 3 IN.,  MECHO NO. 2180058 OR EQUAL


description:
NUT, EXHAUST BOLT, 3/8 IN., HIGH HEAT, NO. 359784C1


description:
PIPE, EXHAUST, 6.9 LITER DIESEL ENGINE, NO. 999668C1


description:
SPOUT, EXHAUST,  MECHO NO. 2210148 OR EQUAL


description:
FUEL SYSTEM PARTS - INTERNATIONAL (ORIG. EQUIP.)


description:
THROTTLE CABLE, HAND, 6.9,  NO. 992712C91


description:
THROTTLE CABLE, (DUAL DRIVE),  NO. 996872C91


description:
BRAKE LINE, 5/18 IN. I.D. X 13/16 IN. O.D.,BRASS, NO.48166-H


description:
HYDRAULIC BRAKE WHEEL INLET FITTING, 5/8 IN. O.D., 7/16 IN. I.D., .33 IN. THICK, FOR MODEL 1700 DUMP TRUCK


description:
HYDRAULIC BRAKE WHEEL INLET BOLT CYL., COPPER, 11/16 IN. O.D., 1/2 IN. I.D., .32 IN., THICK FOR MODEL 1700 DUMP TRUCK


description:
GAUGES, AUTOMOTIVE - INTERNATIONAL (ORIG. EQUIP.)


description:
TEMPERATURE SENDER, 6.9 D -  NO. 143241R91


description:
TEMPERATURE SENDER, DT466,  NO. 479758C1


description:
HEATERS, ACCESS. AND PARTS - INTERNATIONAL (O.E.M.)


description:
CABLE, BLOCK HEATER, 12 VOLT, 59 IN. L, 3-COND. W/ 1/2 IN. SPLIT LOOM - NO.546012C91


description:
HOSE, AUTOMOTIVE - INTERNATIONAL (ORIG. EQUIP.)


description:
MASTER CYLINDER, BC4040 -  NO. 1513594C2


description:
MASTER CYLINDER, BC4040 -  NO. 1513597C2


description:
THERMOSTAT HOUSING, 6.9  -  NO. 339726C4


description:
IGNITION PARTS - INTERNATIONAL (ORIG. EQUIP.)


description:
LAMPS AND FLASHERS, AUTOMOTIVE - INTERNATIONAL (ORIG. EQUIP.)


description:
LAMP HOUSING, 11-1/2 IN. SQ. X 6 IN. D X 8-5/8 IN. I.D., HARD PLASTIC - NO.449744C3


description:
LENS, AUTOMOTIVE LAMP - INTERNATIONAL (ORIG. EQUIP.)


description:
LUBRICATION PARTS AND ACCESSORIES - INTERNATIONAL (ORIG. EQUIP.)


description:
SLEEVE, OIL PRESSURE LINE - NO. 298609C1


description:
PARTS, INTERNATIONAL HARVESTER TRUCK, MISC. (ORIG. EQUIP)


description:
PLUGS, EXPANSION - INTERNATIONAL (ORIG. EQUIP.)


description:
POWER TAKE OFF PARTS - INTERNATIONAL (ORIG. EQUIP.)


description:
BOOT, PTO SHIFT, 5-1/4 IN. H W/FOUR 1/4 IN. MTG. HOLES, BLACK RUBBER, 2 LEVER, NO. 862281R1


description:
RINGS, SNAP - INTERNATIONAL (ORIG. EQUIP.)


description:
SPEEDOMETERS AND PARTS - INTERNATIONAL (ORIG. EQUIP.)


description:
GEAR, SPEEDOMETER, 3-5/8 IN. L, 15 TINE GEAR 1/2 IN. L - NO. 546614C1


description:
STEERING COMP. AND PARTS - INTERNATIONAL (ORIG. EQUIP.)


description:
PULLEY, STEERING, 8-1/4 IN. O.D., 1-3/8 IN. I.D., 1-1/8 IN. W, W/DOUBLE V-BELTS, FOUR 3/8 IN. MTG. HOLES - NO. 489298C1


description:
SUSPENSION COMPONENTS AND PARTS - INTERNATIONAL  (ORIG. EQUIP.)


description:
PIN, FRONT SPRING, F1954  -  NO. 1648110C1


description:
SHOCK, FRONT (CARGO 1650B),  NO. 873619C92


description:
SWITCHES, AUTOMOTIVE - INTERNATIONAL (ORIG. EQUIP.)


description:
STARTER, 2 TERM., WEATHERPROOF CAP - NO. 393209R91


description:
TURN SIGNAL, LEFT-RIGHT-EMER. FLASHER POSITIONS - NO. 471302C94


description:
TRANSMISSION PARTS AND COMPONENTS - INTERNATIONAL (ORIG. EQUIP.)


description:
BOOT, SHIFT LEVER, RUBBER, 2/TEN 1/4 IN. MTG. HOLES


description:
SELECTOR VALVE FOR GEAR SHIFT - NO. 466343C92


description:
WHEELS, RIMS, BOLTS AND NUTS - INTERNATIONAL (ORIG. EQUIP.)


description:
CAP, WHEEL BEARING, FRONT  -  NO. 388247C93


description:
WINDSHIELD WASHER AND WIPER PARTS - INTERNATIONAL (ORIG. EQUIP.)


description:
NOZZLE, WINDSHIELD WASHER,  NO. 921910R92


description:
WIRE AND CABLE - INTERNATIONAL (ORIG. EQUIP.)


description:
Replacement Parts for other than American Motors, Chrysler, Ford, General Motors, and International Harvester


description:
HONDA PARTS AND ACCESSORIES (HONDA OR EQUAL)


description:
ISUZU PARTS AND ACCESSORIES (ISUZU OR EQUAL)


description:
PLATE ASSEMBLY, CLUTCH, NO. 1-31220-273-0


description:
TANK ASSEMBLY, WASHER, NO. 1-83330-058-5


description:
TANK ASSEMBLY, WASHER, NO. 1-83332-028-1


description:
TOYOTA PARTS AND ACCESSORIES (TOYOTA OR EQUAL)


description:
BOLT, BATTERY, CLAMP, 8MM X 8 IN. L - NO. 7445189103


description:
CALIPER KIT, DISC BRAKE, NO. 04479-22010


description:
FUSIBLE LINK, PLASTIC, 30 AMP, NO. 90982-08188


description:
GASKET, VALVE COVER - NO. 11213-35010 (GAS)


description:
HOLD DOWN, BATTERY, CLAMP TYPE, 1 IN. W X 11-1/2 IN. L, METAL- NO. 744089114


description:
NUT, WHEEL, RIGHT HAND, 12MM - NO. 9094201027


description:
PISTON, DISC BRAKE CALIPER, NO. 47731-30050


description:
SHOE, BRAKE, REAR, NO. 04495-35060, 2/SET


description:
SWITCH, OIL SENDING, NO. 83530-14030 (GAS)


description:
SWITCH, TEMPERATURE SENDING, NO. 83420-20020 (GAS)


description:
PARTS, VOLVO-WHITE TRUCK (VOLVO-WHITE OR EQUAL)


description:
BRACKET, REAR SUSPENSION OVERLOAD, NO. 35012-0001


description:
FILTER, SEPARATOR, FUEL/WATER, SPIN-ON TYPE, 7-3/8 IN. L X 3-3/4 IN. O.D. X 15/16 IN. DIA. HOLE, NO. 3132887


description:
SEAL KIT, STEERING GEAR, UPPER, INCLUDES GASKETS AND O-RINGS, NO. V1110929


description:
BUTTON, TRANSMISSION SWITCH,  NO. 3135376


description:
STEP, LOWER, TRUCK, CAST ALUMINUM, W/PROTRUDING ANTI-SKID GRIPS, 16 IN. L X 4-3/4 IN. W, 4-HOLE MOUNT, WHITE/GMC NO. V8028232


description:
SWITCH, TRANSMISSION (211516),  NO. 3135375


description:
7/8 IN. I.D. X 1-7/16 IN. O.D. X 1/2 IN. H W/1/16 IN. GROOVE, NEOPRENE, BLACK, F/UNIV GLAD HAND COUPLERS


description:
OIL PAN, DETROIT-DIESEL ALLISON NO. 8922786 OR EQUAL


description:
1/16 IN. W X 3/8 IN. I.D. X 1/2 IN. O.D. ROUND, BLACK


description:
9-1/2 IN. O.D., 7-1/2 IN. I.D., 1 IN. THICK, NEOPRENE


description:
FOR 8.2 DETROIT DIESEL, PERFECT CIRCLE NO. VS-24 OR EQUAL


description:
SEALS, WATER PUMP - BRAND LISTED OR EQUAL


description:
SHOCK ABSORBERS, STANDARD DUTY - A C DELCO OR EQUAL


description:
SHOCK ABSORBERS, HEAVY DUTY - A C DELCO OR EQUAL


description:
SHOCK ABSORBERS, EXTRA HEAVY DUTY, TRUCK & BUS - A C DELCO OR EQUAL


description:
SHOCK ABSORBERS, AIR ADJUSTABLE - A C DELCO OR EQUAL


description:
SPRING LIFT STABILIZING UNITS - A C DELCO OR EQUAL


description:
SHOCK ABSORBERS - CHRYSLER (O.E.M.) OR EQUAL


description:
SHOCK ABSORBERS - FORD (O.E.M.) OR EQUAL


description:
SHOCK ABSORBERS - GEN. MTRS. (O.E.M.) OR EQUAL


description:
SHOCK ABSORBERS - INTERNATIONAL HARVESTER (O.E.M.) OR EQUAL


description:
SHOCK ABSORBERS - JEEP (O.E.M.) OR EQUAL


description:
SHOCK ABSORBERS - MOBIL SWEEPER (O.E.M.) OR EQUAL


description:
SHOCK ABSORBERS - MONROE (20 SERIES) OR EQUAL


description:
SHOCK ABSORBERS - MONROE (30 SERIES) OR EQUAL


description:
SHOCK ABSORBERS - MONROE (40 SERIES) OR EQUAL


description:
SHOCK ABSORBERS - MONROE (50 SERIES) - OR EQUAL


description:
SHOCK ABSORBERS - MONROE (60 SERIES) OR EQUAL


description:
SHOCK ABSORBERS, MONROE (MISC.) OR EQUAL


description:
SHOCK ABSORBERS, GAS CHARGED (BRAND LISTED OR EQUAL)


description:
SHOCK ABSORBERS, MISC. (BRAND LISTED OR EQUAL)


description:
2-1/2 IN. DIA. X 1-1/2 IN. WITH 5/8 IN. BOLT HOLE, RUBBER


description:
1 IN. DIA., 5-1/2 IN. L, 10-8 LB./IN. PULL, STAINLESS STEEL, MUSIC WIRE .115 IN. DIA., CYLINDRICAL SHAPE W/HOOKS


description:
Tire and Tube Repair Items and Vulcanizers


description:
5/8 IN. X 4 IN. L, W/30 DEGREE BEND, BRASS


description:
3-1/16 IN., STRAIGHT METAL, LONG SKIRT DESIGN, MT NO. 4402 OR EQUAL


description:
4-1/8 IN., NICKEL PLATED BRASS, WITH HIGH HEAT CAPACITY


description:
6 IN., PLASTIC, FOR INSIDE MTD. TIRES, 20/BOX


description:
TIRE REPAIR ITEMS - BRAND LISTED OR EQUAL


description:
ADAPTER, VALVE STEM, TUBELESS, ENLARGE STEM SIZE


description:
ADHESIVE CEMENT, TIRE PATCHING, QUICK SET - 1 QT/CAN


description:
BUFFER HANDLE, AIR POWERED, CAMEL NO. 18-262


description:
BUFFER REPAIR KIT, AIR-POWERED, CAMEL NO. 18-263


description:
BUFFER, NON-METAL, CAMEL NO. 17-238 - 10/BOX


description:
BUFFER, PNEUMATIC STITCHER, HAMILTON NO. S-104


description:
BUFFER, PNEUMATIC STITCHER, MONKEY GRIP NO. 5636


description:
BUFFER, PNEUMATIC WHEEL, MONKEY GRIP NO. 5634


description:
BUFFER-STITCHER COMB. - CAMEL NO. 17-240


description:
CEMENT, TIRE, 4 OZ./CAN, CAMEL NO. 12-085


description:
CEMENT, TIRE, VULCANIZING, (1 QT. CANS) - CAMEL NO. 12-076


description:
CRAYON, TIRE MARKING, CAMEL NO. 17-253 - 12/BOX


description:
LUBRICANT, RUBBER, W/RUST INHIBITOR - 25 LB./CAN


description:
OPEN-EYE NEEDLE, METAL, HEAVY DUTY, CAMEL NO. 15-231


description:
OPEN EYE NEEDLE, REPLACEMENT, METAL, H.D., CAMEL NO. 15-230


description:
MAGIC BUFF, 1 QT. CAN - CAMEL NO. 12-092


description:
NEEDLE, REPAIR, W/EYE AND HANDLE, MONKEY GRIP NO. 5640


description:
NEEDLE, REPAIR, FOR INSERTION, CAMEL NO. 15-224


description:
PATCH KIT, VULCANIZING, CHAMP NO. 9-688 OR EQUAL


description:
PATCH KIT, TUBELESS TIRE, CONTAINS CEMENT, PATCHES, TWIST RASP W/PLASTIC HAND


description:
PATCH STRIP, VULCANIZING, CHAMP NO. 9-690 OR EQUAL


description:
PATCH, VULCANIZE, 2-1/8 IN. - MONKEY GRIP NO. 5002


description:
PLUG, CHEM-O-PLUG, MONKEY GRIP NO. 5221 - 100/BOX


description:
PLUG, MAGIC SEAL, 5/16 IN. - CAMEL NO. 15-185


description:
PLUG, MAGIC SEAL, 5/16 IN. - CAMEL NO. 15-185, 10/BOX


description:
PLUG, MAGIC SEAL, 3/8 IN. - CAMEL NO. 15-186


description:
PLUG, MAGIC SEAL, 7/16 IN., CAMEL NO. 15-187


description:
PLUG, MAGIC SEAL, 7/16 IN. - CAMEL NO. 15-187


description:
PLUG, RADIAL INSERT, STRING TYPE, 4 IN. PUNCTURE SEAL, 20/BOX


description:
PLUG, SELF-VULCANIZING, EXTRA HEAVY DUTY, 1/4 IN.


description:
PLUG, SELF-VULCANIZING, 2-1/2 IN. PATCH, 1/4 IN. STEM


description:
PLUG, SELF-VULCANIZING, 4 IN. PATCH, 1/4 IN. STEM - 12/PKG.


description:
PLUG, SELF-VULCANIZING, 4 IN. PATCH, 3/8 IN. STEM


description:
PLUG, SELF-VULCANIZING, 4 IN. PATCH, 1/2 IN. STEM


description:
PLUG CEMENT AND CLEANER, 1/2 PT. CAN - CAMEL NO. 12-086


description:
RADIAL TIRE PATCHES FOR NAIL HOLE, CAMEL NO. 14-137


description:
RADIAL TIRE PATCHES FOR NAIL HOLE, CAMEL NO. 14-137 - 25/BOX


description:
RADIAL TIRE PATCHES UP TO 1/4 IN. INJURY, CAMEL NO. 14-139


description:
RADIAL TIRE PATCHES UP TO 1/4 IN. INJURY, CAMEL NO. 14-139 - 15/BOX


description:
RADIAL PATCHES UP TO 1/2 IN. INJURY, CAMEL NO. 14-140


description:
RADIAL TIRE PATCHES UP TO 1/2 IN. INJURY, CAMEL NO. 14-140 - 15/BOX


description:
RADIAL TIRE PATCH, 4-1/4 IN. X 5-1/2 IN., MONKEY GRIP NO. 7121


description:
RAYON CORD, 2-7/8 IN. X 3-1/2 IN., 2 PLY, CMAEL NO. 13-102


description:
RAYON CORD, 7-7/8 IN. X 9-3/4 IN., 4 PLY, CAMEL NO. 13-107


description:
RAYON CORD, 9-3/8 IN. X 11-3/4 IN., 5 PLY, CAMEL NO. 13-108


description:
ROLLER-BUFFER-STITCHER COMB., TIRE PATCH, H.D. WOODEN HANDLE


description:
TUBELESS TIRE PATCH, 1-7/16 IN. - 30/BOX


description:
TUBE REPAIR ITEMS (COLD PATCH) - BRAND LISTED OR EQUAL


description:
COLD PATCH CEMENT, CAMEL NO. 12-078 - TUBE


description:
COLD PATCH CEMENT AND CLEANER - 1 QT. CAN - CAMEL NO. 12-089


description:
100 SQ. IN. RUBBER, 50 PATCHES, 1/4 PT. CEMENT, BUFFER - CAMEL NO. 11-065


description:
PATCH, COLD, 1 IN. X 1 IN., MONKEY GRIP NO. 5300


description:
PATCH, COLD, 1 IN. X 1-7/8 IN. MONKEY GRIP NO. 5301


description:
PATCH, COLD, 1-1/4 IN. X 2 IN. MONKEY GRIP NO. 5302


description:
PATCH, COLD, 1-7/8 IN. X 2-7/8 IN. MONKEY GRIP NO. 5303


description:
TUBE REPAIR ITEMS (VULCANIZE) - BRAND LISTED OR EQUAL


description:
BUFFER, PNEUMATIC TUBE REPAIR, MONKEY GRIP NO. 5634


description:
CEMENT, RUBBER REPAIR, 64 OZ./TUBE, MONKEY GRIP NO. 4050


description:
DUAL PURPOSE CHEMICAL PATCH, 1-5/8 IN., CAMEL NO. 14-152


description:
DUAL PURPOSE CHEMICAL PATCH, 1-5/8 IN., CAMEL NO. 14-152 - 40/BOX


description:
DUAL PURPOSE CHEMICAL PATCH, 2-1/8 IN., CAMEL NO. 14-153 - 30/BOX


description:
DUAL PURPOSE CHEMICAL PATCH, 3-1/8 IN., CAMEL NO. 14-154


description:
DUAL PURPOSE CHEMICAL PATCH, 3-1/8 IN., CAMEL NO. 14-154 - 20/BOX


description:
DUAL PURPOSE CHEMICAL PATCH, 1-7/16 X 2-1/4 IN., CAMEL NO. 14-157 - 30/BOX


description:
DUAL PURPOSE CHEMICAL PATCH, 2-3/8 X 4-1/8 IN., CAMEL NO. 14-158 - 20/BOX


description:
DUAL PURPOSE CHEMICAL PATCH, 50 REPAIRS W/TOOL - CAMEL NO. 15-206 & 15-213


description:
DUAL PURPOSE CHEMICAL PATCH, 50 REPAIRS - CAMEL NO. 15-207


description:
GIANT TRUCK PATCH, CAMEL NO. 10-024 - 20/CAN


description:
RED RUBBER, CAMEL NO. 10-031 - 1 LB. ROLL


description:
REGULAR SIZZLE PATCH, CAMEL NO. 10-012 - 10/CAN


description:
REGULAR SIZZLE PATCH, CAMEL NO. 10-023 - 50/CAN


description:
REGULAR SIZZLE PATCH, 1-3/8 IN. X 2 IN. DIAMOND, MONKEY GRIP NO. 5250 - 50/BOX


description:
VULCANIZING CLAMP, PORTABLE - CAMEL NO. 10-019


description:
VULCANIZING CLAMP, SHOP SIZE - CAMEL NO. 10-015


description:
INSERTION TOOL, TUBELESS VALVE, MILTON NO. S-449 OR EQUAL


description:
INSERTION & REMOVAL TOOL, TUBELESS VALVE


description:
INSERTION/REMOVAL TOOL, VALVE STEM, 8 IN. LONG CHAIN, FOR .453 AND .625 RIM HOLE, SCHRADER NO. 5149 OR EQUAL


description:
VALVE TOOL, 5/16 IN. O.D., WITH 1/8 IN. W X 3/23 IN. D SLOT FOR VALVE CORE AND 3/16 IN. O.D., WITH 1/16 IN. W X 3/32 IN. D SLOT FOR VALVE CORE, DOUBLE ENDED, 5 IN. LONG AND 3 IN. HANDLE


description:
VALVES AND ACCESSORIES, TIRE AND TUBE (BRAND LISTED OR EQUAL)


description:
CAP, VALVE, 5/16 IN. I.D., 11/34 IN. O.D., 5/16 IN. H, BRASS W/NICKLE PLATE, MILTON NO. 436 OR EQUAL


description:
CAP, VALVE, SCREWDRIVER TYPE, BRASS, HVY. NICKLED, HEX NUT COLLAR, AC NO. A-301,  4/PKG.


description:
CORE ASSY., VALVE, FORD NO. D3NN1711A, MODEL A62 OR EQUAL


description:
CORE, VALVE, SHORT, HIGH HEAT, TEFLON PLUG WASHER, TEMP. RANGE - 65 DEG. TO + 350 DEG. F, 10/BOX


description:
CORE HOUSING, COMPLETE W/VALVE CORE & CAP, FITS NEW DESIGN FASTFLOW TRACTOR VALVES, 10/BOX


description:
CORE HOUSING, COMPLETE W/VALVE CORE & CAP, FITS OLD STYLE AIR/ WATER TRACTOR VALVES, 10/BOX


description:
CORE HOUSING, COMPLETE W/VALVE CORE AND CAP, FITS AIR/LIQUID GRADER AND TRACTOR VALVES, 1/BOX


description:
EQUALIZER, WITH GAUGE, STEEL VALVE WITH TWO 6 IN. RUBBER HOSE CONNECTING DUAL WHEELS, DUAL DYNAMICS NO. CF105ABT OR EQUAL


description:
NUT, RIM, SOLID BRASS, VALVE STEM RETAINING, FOR AIR/WATER VALVES, 10/BOX


description:
NUT, RIM, BRASS, HEX, FOR .482-26 THREAD FOR HOLDING VALVE STEMS TO RIM OF WHEEL


description:
VALVE, AIR/LIQUID, 90 DEG., SCREW-ON TYPE, MILTON NO. 1434


description:
VALVE, AIR/LIQUID, 4-1/4 IN. BASE, 1-27/32 IN. LONG, FOR GRADER AND TRACTOR TUBES


description:
VALVE, TIRE, .453 X 4 IN., W/30 DEG. CURVE, BRASS, CLAMP-ON


description:
VALVE, TRUCK & BUS SCREW-ON, W/BRIDGE WASHER AND SINGLE BEND, 5 IN. EFF. LENGTH, 10/BOX


description:
VALVE, TUBELESS, .453 X 1-1/4 IN., PLASTIC CAP, 10/BOX


description:
VALVE, TUBELESS, .453 X 1-1/2 IN., PLASTIC CAP, 10/BOX


description:
VALVE, TUBELESS, 5/8 X 1-1/4 IN., PLASTIC CAP, 10/BOX


description:
VALVE, TUBELESS, 5/8 IN. X 1-1/2 IN., PLASTIC CAP, 10/BOX


description:
VALVE, TUBELESS, 5/8 IN. X 1-3/4 IN., PLASTIC CAP, 10/BOX


description:
VALVE, TUBELESS, .453 X 2 IN., PLASTIC CAP, 10/BOX


description:
VALVE, TUBELESS, .453 X 2-1/2 IN., PLASTIC CAP, 10/BOX


description:
VALVE, TUBELESS, 5/8 X 2 IN., PLASTIC CAP, 10/BOX


description:
VALVE, TUBELESS, CLAMP-IN TYPE, AIR/LIQUID, METAL, 5/8 IN. RIM HOLE, 1-7/8 IN. L, STRAIGHT, LARGE BORE, FOR ROAD GRADER TIRES, 10/BOX


description:
VALVE, TUBELESS, CLAMP-IN TYPE, .453 OR 5/8 IN RIM HOLE, 10/BOX


description:
VALVE, TUBELESS, CLAMP-IN TYPE, 2-1/32 IN. L, DOUBLE BEND, FOR 5/8 IN. RIM HOLE, W/STEEL LOCKING NUT


description:
VALVE, TUBELESS, CLAMP-IN TYPE, 2-5/32 IN. LONG, STRAIGHT, METAL, FOR TIRES W/ 5/8 IN. SIDE HOLE MTG., 10/BOX


description:
VALVE, TUBELESS, CLAMP-IN TYPE, TRUCK OR BUS, 5/8 IN. SIDE HOLE MOUNTING, 1-21/32 IN. LENGTH, 10/BOX


description:
VALVE, TUBELESS, CLAMP-IN TYPE, STRAIGHT, BRASS, 5/8 IN. X 3-3/8 IN., W/RUBBER GROMMETS AND HEX NUT


description:
VALVE, TUBELESS, CLAMP-IN TYPE, 5-3/8 IN. L, DOUBLE BEND, 25 DEG. SECOND BEND FOR 13/16 IN., RIM HOLE


description:
VALVE, TUBELESS, CLAMP-IN TYPE, 3-29/32 IN. LONG, FOR .625 IN. OR 5/8 IN. SIDE HOLE MTG., W/GROMMETS, 10/BOX


description:
VALVE, TUBELESS, CLAMP-IN TYPE, STRAIGHT, 4-17/32 IN., FOR 5/8 IN. SIDE HOLE


description:
VALVE, TUBELESS, SCREW-IN TYPE, 2 IN. METAL STEM, CAMEL NO. 32-200


description:
VALVE, TUBELESS, 4 IN., METAL CAP, CAMEL NO. 32-203


description:
VALVE, TUBELESS, SNAP-IN TYPE, 14 IN. RIM, SCHRADER NO. TR414 OR EQUAL


description:
VALVE, TUBELESS, SNAP-IN TYPE, 15 IN. RIM, SCHRADER NO. TR425 OR EQUAL


description:
VALVE, TUBELESS, 4-3/4 IN., METAL CAP, DILL NO. TR573


description:
VALVE, TUBELESS, HIGH PERFORMANCE, W/2 GROMMETS, FOR .453 IN. AND .625 IN. RIM HOLES, 10/BOX


description:
VALVE, TUBELESS, CLAMP-IN TYPE, DOUBLE BEND, 13/16 IN. RIM HOLE, 3-3/4 IN. L, BRASS W/VALVE CAP, FOR ONE PIECE DROP CENTER RIMS, CAMEL NO. 32305


description:
VALVE, TUBELESS, SCHRADER NO. TR500 OR EQUAL


description:
VALVE, PATCH, TUBE TYPE, 1-3/8 IN. LONG, FOR .453 IN. RIM HOLE, FITS 13, 14 AND 15 IN. TUBES, 10/BOX


description:
MANUAL OR AIR COMPRESSED OPERATION, NATIONAL SPENCER MODEL 110A OR EQUAL


description:
ANTIFREEZE FORMULA, NEW, 3.78 LTR. OR 1 GAL., BERRYMAN NO. R1301 OR R801 OREQUAL


description:
HEAVY DUTY, QUICK-SEAL, MULTI-PURPOSE - 5 GAL/BKT


description:
SEALER AND CONDITIONER, NATIONAL CHEMSEARCH AIR PATROL OR EQUAL


description:
Transmissions, Standard and Automatic (Including Clutch Assemblies and Parts)


description:
ASSEMBLY, MIDWEST NO. SMU 1020553CB RD OR EQUAL


description:
ASSEMBLY, MIDWEST NO. SMU 1273906CB OR EQUAL


description:
ASSEMBLY, MIDWEST NO. SMU 140-61-1689-4CB OR EQUAL


description:
BEARING, CLUTCH RELEASE, BCA NO. 2005-C OR EQUAL


description:
BEARING, CLUTCH RELEASE, BCA NO. GM-2005-C OR EQUAL


description:
BEARING, CLUTCH RELEASE, BCA NO. CA-02135-C OR EQUAL


description:
BEARING, CLUTCH, PILOT, BOWER NO. 306SS OR EQUAL


description:
BEARING, CLUTCH, PILOT, SKF NO. 1171 OR EQUAL


description:
BEARING, CLUTCH, PILOT, SKF NO. 1743 OR SKF NO. N2266 OR EQUAL


description:
BEARING, ASSY., THROWOUT, CAST IRON, FOR 1-15/16 IN. SHAFT ON 14 IN. CLUTCH- NATIONAL NO. FA02256C OR EQUAL


description:
BUSHING, 15/16 IN. I.D. X 3/4 IN. O.D. X 7/8 IN. L, COPPER/BRONZE


description:
CLUTCH, MIDWEST NO. CD141687CB4 OR EQUAL


description:
COVER, CLUTCH, MIDWEST NO. CA141686 OR EQUAL


description:
DISC, CLUTCH, BORG-WARNER NO. 175210 OR EQUAL


description:
DISC, CLUTCH, BORG-WARNER NO. 270490 OR EQUAL


description:
DISC, CLUTCH, BORG-WARNER NO. 372876 OR EQUAL


description:
ASSEMBLY, MIDWEST NO. SC10805059B OR EQUAL


description:
DISC, CLUTCH, BORG-WARNER NO. 551837 OR EQUAL


description:
DISC, CLUTCH, 10 IN., KIMCO NO. 17-0020 OR EQUAL


description:
DISC, CLUTCH, KIMCO NO. 24-0629 OR EQUAL


description:
DISC, CLUTCH, 11 IN. (FOR CHRYSLER UNITS) - ARROW NO. CD2472 OR EQUAL


description:
DISC, CLUTCH, 13 IN., KIMCO NO. 24-2876 OR EQUAL


description:
PRESSURE PLATE, BORG-WARNER NO. 155435 OR EQUAL


description:
PRESSURE PLATE, BORG-WARNER NO. 250465 OR EQUAL


description:
PRESSURE PLATE, BORG-WARNER NO. 350030 OR EQUAL


description:
PRESSURE PLATE, BORG-WARNER NO. 351239 OR EQUAL


description:
PRESSURE PLATE, BORG-WARNER NO. 571742CB OR EQUAL


description:
PRESSURE PLATE, 13 IN., KIMCO NO. 23-0539 OR EQUAL


description:
PRESSURE PLATE, 13 IN., KIMCO NO. 23-1239 OR EQUAL


description:
DISC, CLUTCH, BORG-WARNER NO. 270872 OR EQUAL


description:
TRANSMISSION PARTS AND ACCESSORIES - BRAND LISTED OR EQUAL


description:
BOOT KIT, SHIFT, RUBBER PROT., 5-1/4 IN. W X 7 IN. L X 2 IN. H, W/CHROME STEEL PLATE, 4 HOLE MT.


description:
DRIVER, PULSE, 12 VOLT, PULSE DIVIDER, ELECTRONIC, FOR FORD AND DODGE TRUCK TRANSMISSIONS, ARTHUR ALLEN MFG. NO. AA160005B OR EQUAL


description:
ELECTRONIC CONTROL, FOR DISTANCE MEASURING DEVICE, TRANSMISSION, HMR NO. SSV110


description:
GASKET, HOUSING, PAPER, 18 IN. X 13 IN., FORMED, FOR 6 SPEED FULLER,D CHEVROLET NO. 15578612


description:
LEVERD, SHIFT, 36 IN. STEEL, W/O KNOB, FOR 6 SPEED FULLER, CHEVROLET NO. 15605607


description:
REPAIR KIT FOR NEW PROCESS 435 TRAIN., CONSISTS OF SNAP RINGS, SYNCHRO SPRINGS, SPACERS AND NEEDLE BEARINGS


description:
SENSOR, 12 VOLT, 7/8 IN. -18 MALE AND FEMALE THREAD


description:
SHIFT ASSY., TWO-SPEED HI-LOW RANGE AXLE, EATON NO. SA85754/51


description:
SLEEVE WEAR, STEEL, 3.750 IN. I.D., FOR TRANSMISSION YOKE USED ON GMC MODEL7000 TRUCKS


description:
SLEEVE, WEAR, REAR , 3.873 TO 3.879 I.D., STEEL, FOR MURPHY MODEL S-1654 SWEEPER


description:
TRANSMISSION PARTS AND ACCESSORIES, DETROIT DIESEL ALLISON(ALLISON OR EQUAL)


description:
GAUGE KIT, OIL TEMPERATURE,  NO. 6880751


description:
TRANSMISSIONS, DETROIT DIESEL ALLISON (ALLISON OR EQUAL)


description:
TRANSMISSIONS, TRUCK (BRAND LISTED OR EQUAL)


description:
2-1/2 IN. O.D. X 1-1/4 IN. I.D. X 1 IN. W, SEALED


description:
3 IN.O.D. X 1-1/4 IN. THICK, FOR 1-3/4 IN. SHAFT, TAPERED, TIMKEN NO. 3578 OR EQUAL


description:
4-1/16 IN.O.D. X 2-1/4 IN.I.D. X 1-1/4 IN. THICK, TAPERED, TIMKEN NO. 39581


description:
2-7/16 IN. O.D. X 1-1/2 IN. I.D., FRONT, BCA NO. A-18 OR EQUAL


description:
2-1/2 IN. O.D., 1/2 IN. THICK, METAL, BCA NO. LM48510 OR EQUAL


description:
1-1/4 IN. O.D., 9/16 IN. I.D., 9/32 IN. THICK, RUBBER COATED METAL


description:
1-3/4 IN. O.D., 3/4 IN. I.D., 1/4 IN. THICK, ROUND, METAL


description:
SEALS, OIL, AUTOMOTIVE - CHICAGO RAWHIDE OR EQUAL


description:
SEALS, OIL, AUTOMOTIVE - NATIONAL OR EQUAL


description:
SEALS, OIL - MISCELLANEOUS - BRAND LISTED OR EQUAL


description:
CHICAGO RAWHIDE NO. 16805 (DODGE PINION)


description:
FORD NO. EOHZ-4676A, PINION SEAL KIT, INNER REAR


description:
GENERAL MOTORS NO. 15617869, 2-PIECE, FRONT


description:
MOPAR NO. 4506005, 3 IN. O.D., FRONT INNER AXLE


description:
2.566 IN. O.D., 2 IN. SHAFT, .220 IN. WIDTH, FRONT


description:
2.567 IN. O.D., 2 IN. I.D., 1/4 IN. THICK, METAL, FRONT


description:
2.579 IN. O.D. X .500 IN. W, 1.618 IN. SHAFT SIZE, 2.575 IN. HOUSING BORE, REAR, NATIONAL NO. 8835S OR EQUAL


description:
2.750 IN. O.D., 2-11/16 IN. DIA. PLASTIC HUB SEAL, 2-5/8 IN. I.D. GASKET, SEAL KIT


description:
2-7/8 IN. O.D., 1-9/16 IN. I.D., DOUBLE LIP, REAR


description:
4-1/4 IN. O.D. X 5/16 IN., FRONT, NATIONAL NO. 594965C1 OR EQUAL


description:
4-3/4 IN.O.D., 2-7/8 IN.I.D., 1/2 IN. THICK, METAL, NATIONAL NO. 370211A OR EQUAL


description:
6-1/4 IN. O.D. X 3/4 IN., REAR, CHICAGO RAWHIDE NO. 38779 OR EQUAL


description:
4-3/4 IN. O.D. X 2-3/8 IN. I.D. X 1/4 IN. THICK, METAL


description:
Wheels and Rims (Including Wheel Covers and Hubcaps)


description:
1/4 IN. DIA. SAE W/ 3/8 IN. THDS, ONE END, 5/16 IN. DIA. USS W/ 3/8 IN. THDS. OTHER END, 1 IN. OVERALL LGTH.


description:
5/8 IN. DIA. NC X 2-7/8 IN. O.L., FORD NO. E911-21151B OR EQUAL


description:
5-3/4 IN. DIA., W/SEAL FOR ADDING LUBRICANT TO WHEEL


description:
6 IN. DIA., SILVER, PLASTIC W/ EMBLEM FOR GMC, LOCKS DOWN OVER 5 LUG NUTS


description:
6-9/16 IN. DIA., BLACK PLASTIC W/EMBLEM, CHEVROLET NO. 15622331 OR EQUAL


description:
11-3/4 IN. DIA., ALUM. ALLOY, FORD NO. D7TZ-1130A OR EQUAL


description:
12-1/4 IN. DIA., ALUM. ALLOY W/EMBLEM, CHEVROLET NO. 362013 OR EQUAL


description:
SAND SPREADER, 1/4 IN. STEEL PLATE, 4 IN. SQ. W/HOLE IN EACH CORNER, 1 IN. SLEEVE F/2 IN. DIA. SHAFT


description:
TRAILER, GROUP 545H, TYPE 84 SPINDLE, 3300LB. CAP., 5 STUD MT., W/BEARINGS AND CUPS, 4-1/2 IN. BOLT CTR


description:
11/16 IN. I.D., RIGHT HAND NF THREAD, HEX, PLATED


description:
11/16 IN. I.D., LEFT HAND NF THREAD, HEX, PLATED


description:
3/4 IN. O.D. X 7/16 IN. I.D., STANDARD WHEEL THREAD, HEX HEAD


description:
3/4 IN. -16, R-HAND INNER THREAD, HEX HEAD, FOR BUDD WHEELS


description:
3/4 IN. L-HAND THREAD X 2-1/2 IN. L, HEX HEAD, INNER


description:
3/4 IN., HEX, LEFT HAND, SAE THREADS, FRONT, FORD NO. E4HZ-1121A OR EQUAL


description:
3/4 IN., HEX, RT. HAND, SAE THREADS, FRONT, FORD NO. E4HZ-1120A OR EQUAL


description:
1-1/16 IN. I.D., FOR 1/4 IN. O.D. NT100 NYLON TUBING, HEX, BRASS


description:
1-1/8 IN. - 16 OUTER W/R-HD INNER THREAD, FOR DUAL MT


description:
1-1/8 IN. -16 THREAD, L/H THREAD, 1-1/2 IN. O.D.


description:
1-1/8 IN. -16 THREAD, R/H THREAD, 1-1/2 IN. O.D.


description:
1-1/8 IN. HEX HEAD, LEFT HAND THREAD OUTER F/BUDD WHEELS


description:
1-1/8 IN. -16, HEX HEAD, LEFT HAND THREAD, OUTER, AND 3/4 IN. -16 INNER THREAD F/BUDD WHEELS


description:
1-1/8 IN. -16, HEX HEAD, RIGHT HAND THREAD, OUTER, AND 3/4 IN. -16 INNER THREAD F/BUDD WHEELS


description:
1-1/2 IN. O.D. X 1-1/16 IN. I.D. X 7/8 IN. DEEP, RIGHT HAND THREAD, HEX HEAD


description:
1-1/2 IN. O.D. X 1-1/16 IN. I.D. X 7/8 IN. DEEP, LEFT HAND THREAD, HEX HEAD


description:
1-1/2 IN. L-HAND THREAD, OUTER, HEX HEAD


description:
1-1/2 IN. R-HAND THREAD, OUTER, HEX HEAD


description:
REAR-INNER WHEEL, LEFT HAND, MALE AND FEMALE THREAD, F/MEDIUM TRUCK WHEELS


description:
REAR-INNER WHEEL, RIGHT HAND, MALE AND FEMALE THREAD, F/MEDIUM TRUCK WHEELS


description:
14.5 IN. X 6 IN., CTM NO. T600145 OR EQUAL


description:
1/2 IN. DIA. X 3/4 IN. -NC X 2-7/8 IN. L, BLACK STEEL, OPPOSITE END HAS 1 IN. -NF THREAD, CHEVROLET NO. 3796570 OR EQUAL


description:
7/16 IN. SAE X 7/16 IN. USS X 2-1/4 IN. - LAWTON NO. 10527 OR EQUAL


description:
1/2 IN. X 2 IN. -NF, RIGHT HAND THREAD, FRONT DRIVE - N TYPE


description:
3/4 IN. LEFT HAND THREAD, 3-19/32 IN. LENGTH X 2-1/16 IN. HUB


description:
REPAIR KIT, STUD, 7/16 IN. US THREAD X 2-1/4 IN. SAE THREAD, FOR REAR AXLE


description:
REPAIR KIT, STUD, 1/2 IN. SAE-USS STUD AND 1/2 - 20 NUT W/LOCK


description:
10 IN. X 2-1/4 IN. X 5/8 IN. SHAFT, W/TIRE


description:
14 IN. DIA., 4-1/2 IN. BOLT CIRCLE, 5 HOLE


description:
15 IN. X 6 IN., 5.50 BOLT CIRCLE, 6 HOLE, CAST ALUMINUM


description:
15 IN. X 6 IN., 5 LUG, KELSEY NO. X40421 OR EQUAL


description:
15 IN. DIA. X 7.50 IN., 6 HOLE, FOR TUBE TYPE TIRE, SOUTHWEST WHEEL NO. R749103 OR EQUAL


description:
15 IN. DIA., 8-3/4 IN. BOLT CIRCLE, 10 HOLE


description:
16 IN. X 6-1/2 IN. CENTERS, 8-HOLE, BLACK


description:
16.5 IN. DIA. X 9.75 IN., 8 HOLE, KELSEY NO. 102317 OR EQUAL


description:
20 IN. X 8 IN., 10 HOLE, TUBE-TYPE, GOODYEAR NO. 87058 OR EQUAL


description:
22.5 IN. DIA. X 6.75 IN., 6 HOLE, FSS NO. 28157 OR EQUAL


description:
22.5 IN. DIA. X 9.00 IN., 10 HOLE, FOR TUBELESS TIRE


description:
Windshield Wiper and Washer Assemblies, and Parts (Including Windshield Washer Fluid)


description:
CHEVROLET NO. 14032715, RIGHT, STAINLESS STEEL, 16 IN.


description:
BLADES AND REFILLS (STAINLESS STEEL), WINDSHIELD WIPER (ANCO OR EQUAL)


description:
REFILLS, SLIDE-ON TYPE, 2/PACKAGE, NO. 13-18


description:
REFILLS, UNIVERSAL, 16 IN., SLIDE-ON TYPE, NO. U16R


description:
REFILLS, UNIVERSAL, 18 IN., SLIDE-ON TYPE, NO. U18R


description:
WINDSHIELD WIPER BLADES AND REFILLS - BRAND LISTED OR EQUAL


description:
BLADE - CHEVROLET NO. 14031995, STAINLESS STEEL, 16 IN., SLIDE-ON TYPE


description:
BLADE - GENERAL MOTORS NO. V1119750, 20 IN. LONG


description:
BLADE, INTERNATIONAL NO. 1669514C1, 14 IN.


description:
BLADE, TRICO NO. 60-017-1, 17 IN., FITS BAYONET ARM OR HOOK ARM TYPE


description:
REFILL, TOYOTA NO. 85221-32060-73, 18 IN., CUT TO FIT, WIPER INSERT, RUBBER


description:
WINDSHIELD WIPER BLADES, LATCH LOCK TYPE


description:
PARTS AND ACCESSORIES, WINDSHIELD WASHER (MISC.)


description:
NOZZLE, PLASTIC, PUSH-IN TYPE, 1-5/16 IN. L, DOUBLE SPRAY, FORD NO. EOTZ-17603B OR EQUAL


description:
PUMP, WINDSHIELD WASHER, DIAPHRAM TYPE, 12 VOLT, 1-1/2 IN. L X 1-1/2 IN. DIA., W/6 FITTINGS, PLASTIC, CHEVROLET NO. 4914357 OR EQUAL


description:
PUMP, WINDSHIELD WASHER, 12 VOLT, 2-1/2 IN. L X 1/2 IN. DIA., W/SINGLE PLUG, PLASTIC, CHEVROLET NO. 22054183 OR EQUAL


description:
PUMP, WINDSHIELD WASHER, 12V, CHRYSLER NO. 4762319 OR EQUAL


description:
RESERVOIR, 1 GALLON, PLASTIC, SNAP-ON LID, 18 IN. L X 5-1/2 IN. H X 2 IN. THICK, W/12 VOLT PUMP, WHITE-VOLVO NO. 629030005 OR EQUAL


description:
RESERVOIR, 4-1/2 QUART, PLASTIC, FOR FORD TRUCK


description:
FLUID, WINDSHIELD WIPER, CONCENTRATE, BOTTLE


description:
FLUID, WINDSHIELD WIPER, PREMIXED, 1 GAL./CTR.


description:
KIT, WASHER PUMP, ANCO NO. 61-08 OR EQUAL


description:
MOTOR, 12 VOLT, 2-SPEED, FORD NO. E7TZ-17508A OR EQUAL


description:
MOTOR, 12 VOLT, 2-SPEED, 2-PLUG, 3 MTG. HOLES, VOLVO IND. HVY. EQUIP. NO. 8065756 OR EQUAL


description:
SWITCH, WIPER ARM, 4 POLE, 12 VOLT, 8 AMP, 1 IN. SQ. X 5/8 IN., 1-1/2 IN. L, INTERNATIONAL NO. 470249C91 OR EQUAL


description:
SWITCH, WIPER ARM, 3 IN. L, 2 IN. DIA. ON BASE, AIR OPERATED, CHEVROLET NO.G675362 OR EQUAL


description:
TUBING, W.S. WIPER, 1/8 IN. I.D., RUBBER, GATES NO. 60455 OR EQUAL


description:
TUBING, W.S. WIPER, 1/8 IN. I.D., RUBBER, GATES NO. 60455 OR EQUAL - 50 FT./ROLL


description:
TUBING, W.S. WIPER, 5/32 IN. I.D., RUBBER, GATES NO. 27047 OR EQUAL


description:
TUBING, W.S. WIPER, 7/32 IN., GATES NO. 4107 OR EQUAL


description:
AUTOMOTIVE BODIES, ACCESSORIES, AND PARTS


description:
Aerial Ladders and Towers (Including Buckets for Personnel)


description:
26 IN. W X 50 IN. L X 41 IN. D, TWO MAN, ALTEC 704-00019 OR EQUAL


description:
300 LB. CAPACITY, GRAVITY HUNG W/SWING LOCK, SAFETY BELT AND LANYARD, CRANE NATIONAL NO. B1-L OR EQUAL


description:
PARTS, LIFT-A-LOFT LIFT BUCKET (LIFT-A-LOFT OR EQUAL)


description:
SOLENOID, 12 VOLT, 2 WAY CARTRIDGE, ELECTRIC POWERED,  NO. HV-703


description:
SOLENOID, 12 VOLT, 4 WAY CARTRIDGE, ELECTRIC POWERED,  NO. HV-702


description:
SWITCH, CONTROL, FOOT PEDAL OPERATED, UP AND DOWN,  NO. ESB-79


description:
BODY PARTS, PASSENGER (DOORS AND WINDOWS)


description:
KNOB, WINDOW, W/HARDWARE, UNIVERSAL, DORMAN NO. 701-811 OR EQUAL


description:
Covers, Camper Shells, Load Covers, etc. (For Trucks)


description:
COVERS, DUMP TRUCK, FABRICATED FROM PVC COATED MESH


description:
TARP. CANVAS, FOR 10 AND 12 CUYD DUMP BEDS


description:
TARP. W/FLAPS, SPRING LOADED, SELF-RETRACTING, STEEL HOUSING, FOR 6 CUYD DUMP BED


description:
TARP. W/FLAPS, SPRING LOADED, SELF-RETRACTING, STEEL HOUSING, FOR 10 CUYD DUMP BED


description:
ROLLER ASSY., TARP. F/4, 5, AND 6 CU. YD. DUMP BODIES


description:
ROLLER AND CANVAS TOP FOR 10 - 12 CUYD DUMP TRUCK


description:
HYDRAULIC CYL. REPAIR KIT F/DUMP CYL. BED. GALION NO. 9121014 OR EQUAL


description:
NUT, PACKING, 2-5/16 IN. OD, COPPER, HOLLOW FOR CYLINDER ASSY., GALION NO. 1017750 OR EQUAL


description:
O-RING, END SPOOL, QUAD NEOPRENE, 3/4 IN. I.D. X 15/16 IN. O.D. X 1/8 IN. THICK, FOR DAVIS MODEL HPT53 AND HPT63 TELESCOPING HYD. HOISTS


description:
PACKING, HYD. CYLINDER, ARM TYPE, F/DUMP BODY HOIST


description:
PLATE, COVER, METAL, 1/16 IN. THICK, MOLDED FOR END CAP, WITH 3/4 IN. CENTER HOLE, FOR HOIST HYD. PUMP, DAVIS NO. 3912 OR EQUAL


description:
PUMP, HYDRAULIC, 2 IN. GEAR W/ROLLER BEARING, 1-1/4 IN. INLET/OUTLET, 1500 LB. PSI, CABLE CONTROL, F/ARM TYPE HOIST


description:
PARTS AND ACCESSORIES, EJECTO TRUCK BODY


description:
CABLE, CONTROL, 12 FT., WITH ADJUSTABLE ROD ENDS


description:
CABLE, POWER, 5/8 IN. IDA., 23 FT. 3 IN. L, EJ75 OR EQUAL


description:
CABLE, RETURN, 3/8 IN. DIA., 13 FT. 8 IN. L, EJ76 OR EQUAL


description:
12 VOLT DC, 48 AMP, 2800 VIBRATIONS PER MINUTE, THRUST 3500 LBS., DASH MOUNTED PUSH BUTTON, 50 FT. CABLE NO. 6 AWG, TENDAIRE IND. NO. RV3500 OR EQUAL


description:
5/8 IN. DIA., 11-5/8 IN. LONG, W/2 IN. DEPTH AND 1/4 IN. BOLT ENDS, CHROME


description:
13 IN., CHROME - KAR PROD. NO. 72564 OR EQUAL


description:
Hatches, Roof (For Ventilation, Emergency Exit, etc.)


description:
60 IN. W X 24 IN. H, METAL, WHITE F/SMALL TRUCK


description:
71 IN. L, WHITE, LOUVERED, FOR STD. WIDTH BODY


description:
Platform Bodies (Including Elevating Type)


description:
BOLT, 1 IN. X 6-1/2 IN., W/NUT AND HEX CAP, GRADE 2


description:
HANDLE, TAILGATE, PLASTIC, FOR TOYOTA 851 PICKUP - TOYOTA NO. 6923089101 OREQUAL


description:
5 IN. HOLD DOWN TEE HANDLE, 1/4 IN. MTG. HOLE, RUBBER, UNIVERSAL (HOOD AND BATTERY)


description:
8 IN. HOLD DOWN TEE HANDLE, 1/4 IN. MTG. HOLE, RUBBER, UNIVERSAL (HOOD AND BATTERY)


description:
Refuse/Garbage Collection Bodies and Parts


description:
PARTS, EMCO GARBAGE COLLECTION BODY (EMCO OR EQUAL)


description:
BEARING, HYDRAULIC CYLINDER ROD, NO. X00042043


description:
CYLINDER, CUSHION, 5 IN.,  NO. X00081042


description:
CYLINDER, HYDRAULIC, TAIL GATE CLOSE, NO. X00081008


description:
CYLINDER, LOCK, HYDRAULIC, TAIL GATE , NO. X00081030


description:
CYLINDER KIT, HYDRAULIC TAIL GATE, NO. X000276005


description:
CYLINDER KIT, HYDRAULIC TAIL GATE LOCK, NO. X000276072


description:
HARDWARE KIT, HYDRAULIC CYLINDER,  NO. X00276128


description:
NUT, CAM FOLLOWER, 2 IN., NO. X000341024


description:
SEAL KIT, CUSHION CYLINDER, NO. X00276116


description:
PARTS AND ACCESSORIES, LEACH GARBAGE BODY (LEACH OR EQUAL)


description:
PARTS, PAKMOR GARBAGE BODY (PAKMOR OR EQUAL)


description:
PARTS, RAND GARBAGE COMPACTOR (RAND OR EQUAL)


description:
COIL, HYDRAULIC, HYPOWER NO. 6002792 OR EQUAL


description:
LEVER, HYDRAULIC DUAL CONNECTOR,  NO. X0007910


description:
POST, HYDRAULIC, HYPOWER NO. 6013082 OR EQUAL


description:
VALVE SECTION,  HYPOWER NO. MVH43 OR EQUAL


description:
Sewer/Catch Basin Cleaning Body and Equipment


description:
24 IN. X 15 IN. X 12 IN., METAL W/O TRAY


description:
24 IN. W X 18 IN. D X 15 IN. H, TWO COMPARTMENTS, FRONT OPENING W/FRAME MT., W/LOCK


description:
24 IN. X 18 IN. X 18 IN., PRIMER COATED, 14 GA., STEEL PIANO HINGED, WORK BENCH TYPE DOOR, MTD. UNDER BODY OF DUMP TRUCKS


description:
30 IN. X 18 IN. X 18 IN., 12-14 GA., PRIMER COATED STEEL, PIANO HINGED, WORK BENCH TYPE DOOR, WEATHER-TIGHT, TAMPER PROOF LATCH, UNDER BODY MT.


description:
36 IN. L X 14 IN. H. X 16 IN. D, 14 GA., WORK BENCH TYPE DOOR, WEATHERTIGHT, PRIMER COATED STEEL, TAMPER PROOF LATCH


description:
36-7/8 IN. W X 19 IN. H. X 17-1/8 IN. D, SIDE MT., STEEL, W/MTG. HARDWARE - KNAAK NO. 9036 OR EQUAL


description:
48 IN. L X 12-1/2 IN. W X 16-1/2 IN. H X 12-1/2 IN. D, STAKE BED TYPE, ONE LATCH TYPE DOOR W/LOCK, WELD OR BOLT-ON MOUNT, RAWSON IND. NO. US48C OR EQUAL


description:
60-1/2 IN. X 19-1/4 IN. BOTTOM, 53-1/2 IN. X 19-1/4 IN. X 11-1/2 IN. H, CROSSOVER TYPE, INCLS. SMALL TRAY AND LOCK, FOR SMALL PICKUPS


description:
60-1/2 IN. L TOP, 49 IN. L BELOW, 20 IN. W, 15 IN. D, SLIDE TRAY, ADJ. DIVIDERS, CROSSOVER TYPE, W/HANDLE HINGED COVERS, SELF LOCKING, RAWSON NO. ST5 4LWB OR EQUAL


description:
61 IN. L X 20 IN. W X 16 IN. D, CROSSOVER TYPE, SLIDE TRAY, W/HANDLE, ADJ. DIVIDERS, 2 HINGED COVERS, SELF LOCKING, WHITE


description:
61-3/4 IN. L X 69-7/8 IN. O.L. X 20 IN. W, 14 IN. D X 7 IN. MTG. HEIGHT, LOW PROFILE DESIGN W/SLIDING TRAY AND DIVIDER, INCLS. LOCK, FOR FULL SIZE WIDE BED PICKUPS, KOENIG NO. C63S OR EQUAL


description:
62 IN. X 30 IN. X 17 IN. FOR PICKUP TRUCK


description:
64 IN. L X 13 IN. W X 16 IN. H X 11 IN. D, STAKE BED TYPE, 2 LATCH TYPE DOORS  W/LOCKS AND ACCESSORY TRAY


description:
64 IN. L X 21-1/2 IN. W X 16 IN. H, ACROSS BACK TYPE, DUAL FLAPS W/LOCKS, SHELVES, YELLOW, F/ STEPSIDE TRUCKS


description:
64-9/16 IN. L X 11-13/16 IN W X 11-1/4 IN. H, SINGLE LID, 18 GA., STEEL, WITH LIFT OUT TRAY


description:
67-3/4 IN. TOP LGTH. 12 IN. TOP WIDTH, 8 IN. LOWER WIDTH, OVERALL DEPTH 13 IN., 6 IN. MTG. HT., WITH TRAY


description:
70 IN. L X 20-1/2 IN. W X 17 IN. H X 14 IN. D, UTILITY CROSSOVER TYPE, SLIDE TRAY W/O DIVIDERS, LIFT HANDLE, SELF LOCK, WHITE


description:
71 IN. L X 20 IN. W X 16 IN. D, CROSSOVER TYPE, SLIDING TRAY, HINGED COVERS W/LOCK, KOENIG MODEL 2 OR EQUAL


description:
71 IN. L X 20 IN. W X 24 IN. D CROSSOVER TYPE, SLIDING TRAY W/HANDLE AND ADJ. DIVIDERS, TWO HINGED COVERS, SELF LOCKING


description:
78 IN. L X 16 IN. W X 16 IN. H, SLIDE STORAGE TYPE, GRAY, 2 COMPARTMENTS W/LOCKS


description:
88 IN. X 14 IN. W X 13 IN. H, 14 GA., SIDE MT., 2 COMP., METAL, SLIDING TRAY, KEY LOCK, FOR STD. SIZE PICKUP


description:
89 IN. L X 13 IN. W X 28 IN. H, SIDE PAK, 3 COMPARTMENTS, METAL, RED PRIMER, W/WATER RACK


description:
96 IN. L X 16 IN. H X 13 IN. D, SIDE MOUNT, 2 COMPARTMENTS, 2 TRAYS W/DIVIDERS, SELF LOCKING


description:
BAR, TORSION, METAL, 15 IN. L X 1/4 IN. DIA.,  DELTA NO. 10538 OR EQUAL


description:
TRAY ASSEMBLY FOR TOOL COMPARTMENT BOXES


description:
3 IN. DEEP X 8-3/4 IN. WIDE X 19-1/2 IN. LONG, W/4 DIVIDERS, METAL, REMOVABLE


description:
3 IN. DEEP X 9 IN. WIDE X 21 IN. LONG FOR SIDE MOUNT


description:
3 IN. DEEP X 9 IN. WIDE X 41-1/2 IN. LONG FOR UPPER SIDE


description:
20 IN. W X 18 IN. H X 18 IN. D, PRIMER COATED, 12 GA. STEEL, PIANO HINGED DOOR, 3/16 IN. DOOR CHAINS, T-HANDLE LATCH W/LOCK


description:
24 IN. W X 18 IN. H X 18 IN. D, 14 AND 16 GA. STEEL, PIANO HINGE W/LOCK, 4.5 CUFT, MOUNTS UNDER DUMP BED OF DUMP TRUCK, KNAACK NO. R524B OR EQUAL


description:
16 IN. X 38 IN. X 11-1/2 IN., DUMP TRUCKS


description:
GEAR, BRASS - 3/14 IN. OD, 1 IN. ID ARBOR W 1/4 IN. KEYWAY, 1 IN. W, KWIK-LIFT NO. 41245 OR EQUAL


description:
SOLENOID, ELECTRIC, 12 VOLT, CONTINUOUS DUTY, DOUBLE POLE, 6 TERMINAL PORT, METAL ENCASED, CASE GROUNDED, LIFTMOORE NO. 32515 OR EQUAL


description:
SOLENOID, ELECTRIC, 12 VOLT, INTERMITTENT DUTY, SINGLE POLE, 4 TERMINAL PORT, PHENOLIC COATED, CASE GROUNDED, LIFTMOORE NO. 30200 OR EQUAL


description:
SPROCKET, CHAIN, 3/4 IN. BORE W/SET SCREW, 11 TINE, FOR RAWSON-KOENIG MODEL 2500 CRANE, RAWSON NO. 43005 OR EQUAL


description:
WINCH, GEAR DRIVEN, HYDRAULIC OPERATED, W/DRUM SPOOL


description:
WINCH, MANUALLY OPERATED, RATCHET TYPE, 2500 LB. CAP., TWO-SPEED W/QUICK ATTACH HANDLE


description:
GASKET, WINCH MOTOR HOUSING, 4-1/2 IN. (ONE EACH), 2-1/2 IN. (TWO EACH) W/ 1-1/4 IN. SEAL - 3 GASKETS/SET


description:
LINE, WINCH, 1 IN. DIA., STABLE BRAID, NYLON TYPE W/BRAIDED EYES EACH END, 37,200 LB. AVERAGE TENSION STRENGTH, 34.4 LBS./100 FT., 2 IN 1 DOUBLE BRAIDED ROPE


description:
MOTOR, ELECTRIC, WINCH, 12 VOLT, 2-PHASE, 1.9 H.P., 320 AMPS, 3 WIRE, 4 HOLE MOUNT, RAWSON NO. 49147 OR EQUAL


description:
SHAFT, SHIFT LEVER F/TULSA MODEL 7 WINCH


description:
SOLENOID, ELECTRIC, 12 VOLT, 5/16 IN. - 24 THREADS X 19/32 IN., 2-13/64 IN. ON CENTER FOR ELEC. WINCH, COLE-HERSEE 24401-1 OR EQUAL


description:
AUTOMOTIVE VEHICLES AND RELATED TRANSPORTATION EQUIPMENT


description:
4 PASSENGER, 4 CYL. ENGINE, 113 C.I.D. MIN.


description:
AUTOMOBILES, COMPACT, 4-DOOR SEDAN, 4 CYL. ENGINE


description:
4 PASSENGER MIN., 113 CID ENGINE MIN., UNDER 102.5 IN. WHEEL BASE


description:
5 PASSENGER MIN., 113 C.I.D. ENGINE MIN., OVER 102.5 IN. WHEELBASE


description:
5 PASSENGER MIN., 120 CID ENGINE MIN., BI-FUEL NATURAL GAS VEHICLE, OVER 102.5 IN. WHEELBASE


description:
5 PASSENGER MIN., 120 CID ENGINE MIN., OVER 102.5 IN. WHEEL BASE


description:
AUTOMOBILES, COMPACT, 4-DOOR SEDAN, 6 CYL. ENGINE


description:
AUTOMOBILES, MID-SIZE, 4-DOOR SEDAN, 4 CYL. ENGINE


description:
AUTOMOBILES, MID-SIZE, 4-DOOR SEDAN, 6 CYL. ENGINE


description:
5 PASSENGER MIN., 150 CID ENGINE MIN., UNDER 108 IN. WHEELBASE


description:
5 PASSENGER MIN., 153 CID ENGINE MIN., 106 IN. WHEEL BASE MIN., FRONT WHEEL DRIVE


description:
5 PASSENGER MIN., 173 CID ENGINE MIN., UNDER 106 IN. WHEEL BASE


description:
6 PASSENGER, 173 C.I.D. ENGINE MIN., FLEXIBLE FUEL, FRONT WHEEL DRIVE


description:
6 PASSENGER MIN., 173 CID ENGINE MIN., 106 IN. WHEELBASE MIN., FRONT WHEEL DRIVE


description:
AUTOMOBILES, MID/FULL SIZE, 4-DOOR SEDAN, 107 IN. WHEELBASE MIN.


description:
6 PASSENGER, 6 CYL. ENGINE, 173 C.I.D. MIN., FRONT WHEEL DRIVE


description:
5 PASSENGER, 6 CYL. ENGINE, 200 C.I.D. MIN., CNG ALTERNATE FUEL, FRONT OR REAR WHEEL DRIVE


description:
5 PASSENGER MIN., 6 CYL. ENGINE, 200 CID MIN., REAR WHEEL DRIVE


description:
5 PASSENGER MIN., 6 CYL. ENGINE, 200 CID MIN., FRONT WHEEL DRIVE


description:
6 PASSENGER, 8 CYL. ENGINE, 280 C.I.D. MIN.


description:
AUTOMOBILES, POLICE SPECIAL, 4 DOOR SEDAN


description:
FULL SIZE, FRONT WHEEL DRIVE, 6 CYL.ENGINE, 4 DOOR SEDAN


description:
FULL SIZE, REAR WHEEL DRIVE, 8 CYL. ENGINE


description:
MID SIZE, FRONT WHEEL DRIVE, 6 CYL. ENGINE


description:
4 PASSENGER MIN., 4 CYL. ENGINE, 113 C.I.D. MIN.


description:
6 PASSENGER MIN., 6 CYL. ENGINE, 173 C.I.D. MIN.


description:
Motor Scooters and Trucksters, Engine Driven (Including all Terrain Vehicles)


description:
PARTS, JOHN DEERE UTILITY TRUCK (JOHN DEERE OR EQUAL)


description:
Motor Scooters and Trucksters, Electric Powered (Including Golf Carts and All Terrain Vehicles)


description:
Prisoner Transport Bus and Van (Including Special Components)


description:
School Buses, Complete, Conventional Type


description:
School Buses, Complete, Small Vehicle Type


description:
Short Wheelbase, Two-and Four-Wheel Drive Vehicle


description:
VEHICLES, SPORT UTILITY, TWO-WHEEL DRIVE


description:
FULL SIZE, 4X2, FOUR DOOR, W/COMPRESSED NATURAL GAS (CNG) ENGINE PACKAGE


description:
FULL SIZE, 4 X 4, FOUR DOOR, W/COMPRESSED NATURAL GAS (CNG) ENGINE PACKAGE


description:
OPTION - BEACON LIGHT, FORCE-4 IN. MODEL 4100 OR EQUAL


description:
OPTION - MANUAL SET, PRINTED, FOR FULL SIZE, 4-DOOR, 4X2


description:
OPTION - MANUAL SET, ON MICROFICHE, FOR FULL SIZE, 4-DOOR, 4X2


description:
OPTION - PAINT, FOUR DOOR, SINGLE COLOR SPECIAL FLEET (1-4 UNITS)


description:
OPTION - PAINT, FOUR DOOR, SINGLE COLOR SPECIAL FLEET (5 OR MORE UNITS)


description:
OPTION - PAINT, FOUR DOOR, TWO TONE COLOR SPECIAL FLEET (1-4 UNITS)


description:
OPTION - PAINT, FOUR DOOR, TWO TONE COLOR SPECIAL FLEET (5 OR MORE UNITS)


description:
OPTION - PINTLE HOOK AND 2 IN. BALL W/CENTER HOOK COMBINATION


description:
OPTION - SPOTLIGHT, 6 IN., UNITY OR EQUAL


description:
OPTION - SPRINGS, FRONT, HEAVY DUTY (TO ACCOMODATE FUTURE ADDITION OF SNOW PLOW PACKAGE)


description:
VEHICLES, UTILITY, TWO AND FOUR WHEEL DRIVE


description:
FIVE (5) PASSENGER, 4 X 2, DOWN SIZE, 2 DOOR PACKAGE


description:
FIVE (5) PASSENGER, 4 X 2, DOWN SIZE, 4 DOOR PACKAGE


description:
FIVE (5) PASSENGER, 4 X 2, COMPRESSED NATURAL GAS (CNG) ENGINE PACKAGE


description:
FIVE (5) PASSENGER, 4 X 4, DOWN SIZE, 2 DOOR PACKAGE


description:
FIVE (5) PASSENGER, 4 X 4, DOWN SIZE, 4 DOOR PACKAGE


description:
OPTION - GLASS, PRIVACY, ON ALL WINDOWS EXCEPT WINDSHIELD AND DRIVER'S AND FRONT PASSENGER WINDOWS


description:
OPTION - PAINT, SINGLE COLOR SPECIAL FLEET (1-4 UNITS)


description:
OPTION - PAINT, SINGLE COLOR SPECIAL FLEET (5 OR MORE UNITS)


description:
OPTION - PAINT, TWO TONE COLOR SPECIAL FLEET (1-4 UNITS)


description:
OPTION - PAINT, TWO TONE COLOR SPECIAL FLEET (5 OR MORE UNITS)


description:
OPTION - SPOTLIGHT, 6 IN., UNITY OF EQUAL


description:
2 WHEEL DRIVE, REGULAR CAB, CNG ALTERNATE FUEL


description:
2 WHEEL DRIVE, EXTENDED CAB, LONG BED, CNG ALTERNATE FUEL


description:
4 WHEEL DRIVE, REGULAR CAB, CNG ALTERNATE FUEL


description:
4 WHEEL DRIVE, EXTENDED CAB, W/BUCKET SEATS


description:
4 WHEEL DRIVE, 8500 G.V.W. MIN., FOR USE W/SNOW BLADE


description:
4 WHEEL DRIVE, 8500 LB. G.V.W. MIN., 350 CID MIN., 8 CYL. ENGINE, HEAVY DUTY, W/HEAVY DUTY FRONT AXLE AND SUSPENSION


description:
TRUCKS, PICKUP, FLEETSIDE, TWO AND FOUR WHEEL DRIVE


description:
OPTION - ENGINE, 8 CYLINDER TURBO DIESEL


description:
OPTION - POLYURETHANE, SPRAY-ON, BED LINER, RHINO LINER OR EQUAL


description:
OPTION - SPRINGS, FRONT, HEAVY DUTY, FOR SNOW PLOW PACKAGE


description:
TRUCKS, PICKUP, FLEETSIDE, CREW CAB, TWO AND FOUR WHEEL DRIVE


description:
PICKUP, CREW CAB, 4 X 4 W/HEAVY DUTY FRONT SPRINGS


description:
2 WHEEL DRIVE, SINGLE REAR WHEELS, 8 FT. STYLESIDE PICKUP BED, CNG ALTERNATE FUEL


description:
2 WHEEL DRIVE, SINGLE REAR WHEEL, W/8 FT. STYLESIDE BED


description:
TRUCKS, PICKUP, DOWN SIZE, TWO AND FOUR WHEEL DRIVE


description:
4 DOOR, 4 WHEEL DRIVE, 129.5 IN. WHEELBASE MIN.


description:
2 DOOR, 4 WHEEL DRIVE, 6 CYL. ENGINE MIN., 240 CID ENGINE W/AUTO TRANSMISSION, W/2 FRONT AND 2 REAR TOW HOOKS, 100 IN. WHEEL BASE MIN.


description:
4 DOOR, 4 WHEEL DRIVE, 6 CYL. ENGINE MIN., 240 CID ENGINE, W/2 FRONT AND 2 REAR TOWING HOOKS, 100 IN. WHEEL BASE MIN.


description:
TRUCKS, UTILITY, 4 X 4, POLICE SPECIAL PACKAGE


description:
Trucks (With Specialized Bodies - Aerial Ladders and Tower Buckets, Diggers, etc.)


description:
TRUCK COMPLETE W/6X4 CAB/CHASSIS, DUMP BODY, PLOW FRAMES/HITCHES, AND SALT SPREADER INSERTS


description:
TRUCK COMPLETE W/6X4 CAB/CHASSIS, 20 CUYD CAP. REFUSE BODY, CART DUMPING UNIT, PLOW FRAMES, AND SNOW PLOWS


description:
FIRE TRUCK, HAZARDOUS MATERIALS SPECIAL SERVICE


description:
CHASSIS 4 X 2, MIN. G.V.W. RATING 46,000 LBS., 4 DOOR CAB FORWARD DESIGN, DIESEL POWERED, FULLY EQUIPPED FOR FIRE FIGHTING


description:
2 WHEEL W/6 DOOR UTILITY BODY, REGULAR CAB


description:
TRUCKS, PICK-UP, 3/4 TON, 8500 LB. GVW MIN., HEAVY DUTY, DIESEL


description:
2 WHEEL DRIVE, 6 DOOR, UTILITY BODY, CREW CAB W/REAR BENCH SEAT


description:
TRUCKS, PICKUP, 4 WHEEL DRIVE, TURBO DIESEL


description:
AUTOMATIC TRANSMISSION, HEAVY DUTY TRAILERING, OFF-ROAD SKID PLATE, STEEL BELTED RADIAL TIRES, DELUXE APPEARANCE PKG. ROOF MARKET LAMPS, DARK TINTED GLASS, FRONT BUCKET SEATS


description:
Trucks, Fire Protection and Crash Rescue


description:
Trailers, Custom: Personnel, Food Service, Equipment, etc.


description:
PARTS AND ACCESSORIES, FRUEHAUF TRAILER (FRUEHAUF OR EQUAL)


description:
72 IN. X 108 IN. I.D., STEEL TREAD FLOORING, DROP-IN TAILGATE/RAMP AND 2 RAMPS FOR LOADING, 5.00-15 TIRES


description:
PARTS, MILLER TRAILER ( MILLER OR EQUAL)


description:
BRACKET, JACK STAND, ATWOOD NO.145-80580


description:
NUT, WHEEL, 3/4 IN. I.D., HEX W/SLOTS FOR TIGHTENING


description:
RING, LOCKING, FOR 8.25 X 15 RIMS, 17-1/2 IN. O.D., 14-1/4 IN. I.D., 1/4 IN. THICK


description:
Trailers, House (Mobile Dorms, Homes, Labs, Offices)


description:
SELF-STORING, FIBERGLASS SCREEN, INCL. ALL HDWE.


description:
SKIRTING KIT INCL. UPPER AND LOWER ALUM. CHANNELS, VERTICAL MEMBERS, AND R-4 INSULATED PANELS. 10 L.F X 2 FT. HIGH


description:
24 IN. X 36 IN., FIXED, INTERIOR OR EXTERIOR MT.


description:
300 GAL. CAP., 100 AND 200 GAL. COMP., 47 IN. W X 72 IN. L, 3/4 IN. DRAIN, 2 HAND PUMPS, TANDEM AXLE, 15 IN. 4 PLY TIRES


description:
PARTS AND ACCESSORIES, TILT BED TRAILER (BRAND LISTED OR EQUAL)


description:
CLIP, 3 IN. OL X 1-1/4 IN. W X 1/4 IN. THICK, WITH 9/16 IN. HOLE, METAL BEVELED, WITH 2 TEETH ON ONE END, FOR CLAMPING DOWN TRAILER DECKING


description:
SCREW, TORX HEAD, 1/4 IN. - 20 X 3 IN., TYPE F POINT, FOR REPAIR OF TRAILER PHOSPHATE AND OIL FINISH FLOORING, KAR NO. 70975 OR EQUAL


description:
PARTS AND ACCESSORIES, WISCONSIN TRAILER (WISCONSIN OR EQUAL)


description:
BOOT, LIGHT, UNIVERSAL, RUBBER, 3 IN. X 4 IN. X 1 IN. THICK, TAPERS TO 3-3/16 IN. AT BOTTOM WITH 1-1/4 IN. DIAMETER HOLE, NO. 14700


description:
TUBE, SCREW, ADJ., 5-1/4 IN. L, 1-1/4 IN. O.D. X 3/4 IN. I.D., THREAD THROUGHOUT, 8 IN. L, 1/2 IN. O.D. WITH 1/2 IN. THREAD EACH END


description:
PARTS AND ACCESSORIES, SEMI-TRAILER GLAD HAND


description:
BRAKE, AIR, ALUMINUM BODY, W/RUBBER SEAL, FOR 1/2 IN. LINE


description:
SPRING, HOSE,  MIDLAND NO. 11600 OR EQUAL


description:
VANS, CARGO, W/SINGLE BUCKET AERIAL DEVICE


description:
MINI-VAN, FRONT WHEEL DRIVE, CNG ALTERNATE FUEL


description:
MINI-VAN, 5500 LB. G.V.W., 105 IN. WHEEL BASE MIN.


description:
OPTION - AIR CONDITIONING AND HEAT, REAR


description:
6000 LB. G.V.W., 123 IN. WHEEL BASE MIN.


description:
7000 LB. G.V.W., 123 IN. WHEEL BASE MIN.


description:
7000 LB. G.V.W., CNG ALTERNATE FUEL, 123 IN. WHEEL BASE MIN.


description:
9000 LB. G.V.W., 127 IN. WHEEL BASE MIN.


description:
8,000 LB. G.V.W., MAXI OR SUPER OR EQUAL


description:
8,500 LB. G.V.W., MAXI OR SUPER OR EQUAL, CNG ALTERNATE FUEL


description:
8500 LB. G.V.W., 127 IN. WHEEL BASE MIN.


description:
FULL SIZE VAN W/COMPRESSED NATURAL GAS (CNG) ENGINE PACKAGE


description:
OPTION - WINDOWS, FLIP-OUT, IN REAR DOORS


description:
Vans, Personnel (Regular and Handicapped Equipped)


description:
VANS, WINDOW, MINI, AND OPTIONAL EQUIPMENT


description:
5-PASSENGER VAN W/COMPRESSED NATURAL GAS (CNG) ENGINE PACKAGE


description:
7 PASSENGER, FRONT WHEEL DRIVE, 110 IN. WHEEL BASE MIN.


description:
7 PASSENGER, FRONT WHEEL DRIVE, FOUR DOOR


description:
7 PASSENGER, FRONT WHEEL DRIVE, CNG ALTERNATE FUEL


description:
7 PASSENGER, REAR WHEEL DRIVE, 110 IN. WHEEL BASE MIN.


description:
OPTION - GLASS, WINDOW, PRIVACY, ON ALL GLASS EXCEPT WINDSHIELD, DRIVER'S AND FRONT PASSENGER WINDOWS


description:
VANS, WINDOW, FULL SIZE, AND OPTIONAL EQUIPMENT


description:
8 PASSENGER, 6 CYL. ENGINE MIN., 239 CID W/AUTOMATIC TRANSMISSION, 109 IN. WHEEL BASE MIN.


description:
8-9 PASSENGER VAN W/COMPRESSED NATURAL GAS (CNG) ENGINE PACKAGE


description:
12 PASSENGER, 6 CYL. ENGINE MIN., 262 CID MIN., 124 IN. WHEEL BASE MIN.


description:
15 PASSENGER VAN W/MINIMUM OF 8,600 LB. GVWR


description:
15 PASSENGER, CNG ALTERNATE FUEL, 127 IN. WHEEL BASE MIN.


description:
OPTION - GLASS, PRIVACY, ON ALL GLASS EXCEPT WINDSHIELD, AND DRIVER'S AND FRONT PASSENGER WINDOWS


description:
OPTION - PAINT, TWO TONE COLOR SPECIAL FLEET (5 0R MORE UNITS)


description:
Air Powered Shop Tools, Regulators, and Parts


description:
MANUAL OPERATED, SINGLE LOAD, W/3 NOSE PIECE TYPES


description:
PARTS, FAIRCHILD AIR REGULATOR (FAIRCHILD OR EQUAL)


description:
VALVE ASSY., INNER, INDEX NO. 19, FOR MODEL NO. 10 W/RANGE 1-60 P.S.I.G., INSTRUMENTATION SHOP REGULATOR TESTING, NO. 1820


description:
PARTS, LEVEL-TROL LEVEL CONTROL VALVE (LEVEL-TROL OR EQUAL)


description:
BODY, RELAY, FOR MODEL 2502-R-259, NO. 2H2693-000B


description:
GASKET, BELLOWS FRAME, NEOPRENE, FOR MODEL 2502-R-259, NO. 1H265403012


description:
SPACER, RING, ZINC, FOR RELAY ASSY., FOR MODEL 2502-R-259


description:
Alarm Systems, Visual and Audio (For Electrically and Mechanically Operated Doors)


description:
Aligners, Balancers, and Accessories, Wheel


description:
SLEEVE, WEAR, SHAFTS 2.500 - 2.506 IN. O.D., REMOVABLE FLANGE, 3/4 IN. WIDE SLEEVE W/O FLANGE, 15/16 IN. WIDE W/FLANGE FOR 8.2 LITER DIESEL ENGINE


description:
WEIGHTS, THIN, WHEEL BALANCE - AUTOMOBILE


description:
1/4 OZ., SNUGL NO. 1025 OR EQUAL - 50/BOX


description:
1/2 OZ., SNUGL NO. 1050 OR EQUAL - 50/BOX


description:
3/4 OZ., SNUGL NO. 1075 OR EQUAL - 50/BOX


description:
1-1/4 OZ., SNUGL NO. 1125 OR EQUAL - 50/BOX


description:
1-1/2 OZ., SNUGL NO. 1150 OR EQUAL - 50/BOX


description:
1-3/4 OZ., SNUGL NO. 1175 OR EQUAL - 50/BOX


description:
2-1/4 OZ., SNUGL NO. 1225 OR EQUAL - 50/BOX


description:
2-1/2 OZ., SNUGL NO. 1250 OR EQUAL - 50/BOX


description:
2-3/4 OZ., SNUGL NO. 1275 OR EQUAL - 50/BOX


description:
3-1/4 OZ., SNUGL NO. 1325 OR EQUAL - 50/BOX


description:
3-1/2 OZ., SNUGL NO. 1350 OR EQUAL - 50/BOX


description:
3-3/4 OZ., SNUGL NO. 1375 OR EQUAL - 50/BOX


description:
1-1/2 OZ., SNUGL NO. 2150  OR EQUAL - 50/BOX


description:
2 OZ., SNUGL NO. 2200  OR EQUAL - 50/BOX


description:
3 OZ., SNUGL NO. 2300  OR EQUAL - 50/BOX


description:
3-1/2 OZ., SNUGL NO. 2350 OR EQUAL - 50/BOX


description:
4 OZ., SNUGL NO. 2400  OR EQUAL - 50/BOX


description:
4-1/2 OZ., SNUGL NO. 2450 OR EQUAL  - 50/BOX


description:
1/2 OZ., FOR THICK RIMS, TI NO. 13309 OR EQUAL


description:
1 OZ., FOR THICK RIMS, TI NO. 13310 OR EQUAL


description:
1-1/2 OZ., FOR THICK RIMS, TI NO. 13311 OR EQUAL


description:
2 OZ., FOR THICK RIMS, TI NO. 13312 OR EQUAL


description:
2 OZ., FITS TUBE 10.00-20 AND UP, TUBELESS OVER 8.0 EXCEPT FOR SPECIAL DESIGNS, LAW NO. 1359 OR EQUAL


description:
3-1/2 OZ., FOR THICK RIMS, TI NO. 13315 OR EQUAL


description:
4 OZ., FOR THICK RIMS, TI NO. 13316 OR EQUAL


description:
4 OZ., SNUGL NO. 4040 OR EQUAL  - 25/BOX


description:
4-1/2 OZ., FOR THICK RIMS, TI NO. 13317 OR EQUAL


description:
5 OZ., FOR THICK RIMS, TI NO. 13318 OR EQUAL


description:
9 OZ., SNUGL NO. 4090 OR EQUAL  - 25/BOX


description:
14 OZ., SNUGL NO. 4140 OR EQUAL  - 10/BOX


description:
16 OZ., SNUGL NO. 4160 OR EQUAL  - 10/BOX


description:
10 OZ., SNUGL NO. 5100 OR EQUAL - 25/BOX


description:
Battery Chargers and Testers, Automotive (See Also Class 725)


description:
BATTERY CHARGER, UL RATING, CHARGING AMPERAGE FOR 6V/12V NOT LESS THAN 10 AMP. TO HAVE METER DESIGNED TO AUTOMATICALLY TAPER TO 1/4 AMP. WHEN BATTERY IS CHARGED. CHARGING CABLES TO BE MINIMUM OF FT. LONG WITH COLOR CODED CLAMPS.


description:
BATTERY CHARGER, UL RATING CHARGING AMPERAGE NOT LESS THAN 70A, W/250 AMP CRANK ASSIST, MIN. 8 FT. CABLES, WILL CHARGE, START, TEST BATTERIES IN ONE HOOKUP


description:
HEAVY DUTY, W/WHEELS, MARQUETTE NO. M97680 OR EQUAL


description:
BATTERY CHARGER, U.L. RATING CHARGING AMPERAGE FOR 6V/12V NOT LESS THAN 80A/40A; W/350 AMP. BOOST, AC INPUT OF 115-120 VOLTS AT 10-13 AMPERES. CHARGING CABLES TO BE A MINIMUM OF 8 FT., #6 WIRE JACKETED IN NEOPRENE


description:
BATTERY CHARGER, U.L. RATING CHARGING AMPERAGE FOR 6V/12V NOT LESS THAN 100A/50A; W/350 AMP. BOOST, AC INPUT OF 115-120 VOLTS AT 14-17 AMPERES. CHARGING CABLES TO BE A MINIMUM OF 8 FT., #4 WIRE JACKETED IN NEOPRENE


description:
BATTERY CHARGER, UL RATING, CHARGING AMPERAGE FOR 6V/12V/24V, NOT LESS THAN100A/70A/35A AC; W/400 AMP. BOOST, INPUT OF 115-120 VOLTS AT 15 AMPS. CHARGING CABLES TO BE A MINIMUM OF 9 FT. LONG, #4WIRE JACKETED IN NEOPRENE.


description:
40/2 A CHARGER, 200 A STARTER, HEAVY DUTY, DAYTON NO. 21947 OR EQUAL


description:
CHARGER, 6 AMP, 6/12 VOLT, 115 VOLT, 60 CYCLE, W/GROUNDED POWER CORD, SEARS NO. 28H71831 OR EQUAL


description:
PARTS AND ACCESSORIES, CHRISTIE CHARGER (CHRISTIE OR EQUAL)


description:
ALARM ASSY., OVERVOLTAGE, NO. S113211-29 OR EQUAL


description:
DIRECT DIAL READING, 1/4 IN. I.D. HOSE, WET CELL, SUCTION BULB, FOR 6, 12, 24 VILT BATTERIES


description:
GLASS TUBE, 5 IN. LONG, 5 RED RUBBER FLOAT BALLS, 0-5 RANGE, FOR HOT OR COLD


description:
POCKET STYLE, 6 IN. LONG, FLOAT BALLS SHOW CELL CHARGE


description:
Brushes and Cleaning Compounds, Automotive Cleaning


description:
BATTERY TERMINAL, 18 OZ. AEROSOL/CAN, ZAP OR EQUAL


description:
10 IN. HORSEHAIR BLEND, 2-1/2 IN. TRIM, 24 IN. FLAT WOODEN HANDLE BOURAS NO. RB08 OR QUAL


description:
1-1/4 IN. X 3/4 IN. X 3/8 IN., MARINE, FOR 3KW EXCITER GENERATOR


description:
1-3/8 IN. X 1 IN. X 1/2 IN., FOR MOTOR ON STEERING PUMP


description:
FLUTED, FOR MAIN GENERATOR, G.E. NO. 266A983AF16-F OR EQUAL


description:
Cements (For Chromated Felt, Gaskets, Trim, and Weather Strip) and Gasket Shellac


description:
.5 OZ TUBE, ADHESIVE AND PRIMER, BOND MIRROR TO GLASS


description:
.20 - 1.33 OZ. ADHESIVE AND SPRAY PRIMER


description:
1.69 OZ., REMOVEABLE, PERMATEX NO. 81789 OR EQUAL


description:
5 OZ. TUBE, HI-STRENGTH, F/STUD AND BEARING MTS.


description:
10 ML/BOTTLE, HIGH STRENGTH, LOCKTITE NO. 26221 OR EQUAL


description:
10 ML/BOTTLE, MEDIUM STRENGTH, LOCKTITE NO. 24221 OR EQUAL


description:
20 OZ., MEDIUM STRENGTH, 60 MIN. HARDENER


description:
50 ML, HIGH STRENGTH, LOCKTITE NO. 27131 OR EQUAL


description:
50 ML, REMOVABLE W/SOLVENT, LOCKTITE NO. 24231 OR EQUAL


description:
3 OZ. TUBE - PERMATEX 1B OR EQUAL - 36/CS


description:
5 OZ. TUBE, RUBBER & GASKET ADHESIVE, 3M #847 OR EQUAL


description:
8 OZ. CAN W/BRUSH TOP, F/THIN (.010 OR LESS)


description:
12 OZ. AEROSOL CAN, HIGH TACK SPRAY,  PERMATEX NO. 99MA OR EQUAL


description:
6 OZ. TUBE, FLEX., BONDS RUBBER TO METAL


description:
10 OZ. TUBE.  PERMATEX NO. 1372 OR EQUAL


description:
4 FL.OZ./BOTTLE W/APPLICATOR, SLOW DRY, PLIABLE, FORMS PASTE AFTER APPLICATION, PERMATEX NO. 3 OR EQUAL


description:
1/3 OZ. BTL., QUICKSET, LOCTITE NO. 46557 OR EQUAL


description:
3 OZ. TUBE F/ENGINE OXYGEN SENSOR - 12/CTN


description:
3 OZ. TUBE, ULTRA BLUE, RTV, OIL RESISTANT, LOCKTITE NO. 58730 OR EQUAL


description:
8 OZ. AEROSOL CAN, HIGH TEMP. SILICONE, PRO-FORM NO. PF-966 OR EQUAL


description:
10.1 OZ CARTRIDGE, CLEAR, DAP NO. 08641 OR EQUAL


description:
10.1 OZ CARTRIDGE, WHITE, DAP NO. 08654 OR EQUAL


description:
16 OZ., HI-TACK, W/BRUSH TOP, UP TO 400 DEG. F


description:
16 OZ. AEROSOL CAN, BLUE, TEMP. RANGE - 65 DEG. F TO 450 DEG. F


description:
60 OZ. TUBE, TYPE B SILICONE, ODORLESS, F/COMPUTER EQUIP. VEHICLES


description:
80 ML TUBE, BLACK, NON-HARDENING, PERMATEX NO. 80500 (2B) OR EQUAL


description:
80 ML TUBE, BLUE, NON-HARDENING, PERMATEX NO. 80506 (6BR) OR EQUAL


description:
Chamois and Sponges (Including Car Wash Mittens and Windshield Squeegees)


description:
CHAMOIS, SHEEPSKIN, OIL TANNED, STRAIGHT GRADE 1


description:
6 IN. X 8 IN., W/ELASTIC WRIST, SUPER SOFT FOR DUSTING, WAXING OR WASHING


description:
TYPE I FORMS GRADE 1 ROUND OR OVAL SIZE A 19 IN X 17 IN - 21 IN


description:
4-1/2 IN. W, 7-1/8 IN. L, 2 IN. THICK, OVAL


description:
8 IN., DOUBLE SIDED, SQUEEGEE AND BUG SPONGE, W/16 IN. HANDLE


description:
8 IN., DOUBLE SIDED, SQUEEGEE AND BUG SPONGE W/ 21 IN. WOODEN HANDLE


description:
8 IN. DOUBLE SIDED, SQUEEGEE AND BUG SPONGE, W/24 IN. HANDLE


description:
Cleaning and Washing Equipment, Steam, Cold and Hot Water Pressure and Jet Types, Portable and Stationary (Also See 075-49)


description:
CLUTCH, PUMP, SINGLE PULLEY, W/ 1 IN. I.D. SHAFT


description:
CONTROL, PRESSURE, ALLEN AND BRADLEY NO. 836-C7A OR EQUAL


description:
COUPLING SHAFT, FUEL PUMP, PLASTIC, 4-3/8 IN. LONG


description:
FILTER, FUEL, FOR KEROSENE HEATER ON STEAM CLEANER


description:
GASKET, OVAL, INSP. HAND HOLE, 2-1/2 IN. X 3-1/2 IN. X 1/2 IN.


description:
MOTOR, BLOWER, 1/3 H.P., G.E. NO. 7J206AY OR EQUAL


description:
NOZZLE, BURNER, 1-1/4 IN. X 3/4 IN., BRASS


description:
PUMP, FUEL, DIESEL, SUNSTRAND NO. 04BA-100-2 OR EQUAL


description:
PUMP, HYDRO, 5/8 IN. SHAFT, 3/4 IN. F-NPT INLET/OUTLET, 300 P.S.I.


description:
PUMP, WATER, HYDRO PUMP NO. 4001 OR EQUAL


description:
RELAY, IGNITION CONTROL, HONEYWELL NO. RA816 F611-330 OR EQUAL


description:
SWITCH, MERCURY, FOR PUMP CONTROL, MCDONNELL AND MILLER NO. SA150-125 OR EQUAL


description:
SWITCH, OIL BURNER CONTROL, HONEYWELL NO. R8404A-1028 OR EQUAL


description:
TIP, SPRAY, 1 IN. X 1/2 IN., GALV. STEEL, FOR END OF GUN ASSY.


description:
TIP, SPRAY, NO. 6, BRASS, 1/4 IN. X 1 IN. L, ONE END THREADED


description:
TRIGGER, VALVE, 1/4 IN. F-NPT INLET, 11/16 IN. - 16 THREAD M - OUTLET CONNECTOR W/ LOCK, 250 P.S.I., 2 GAL/MIN


description:
VALVE ASSY., PUMP PRESSURE CONTROL, MCDONNELL AND MILLER NO. 150 OR EQUAL


description:
VALVE, 3-WAY, BRONZE, JENKINS NO. 26-104-28 OR EQUAL


description:
WASHER AND STEAM CLEANER COMBINATION, HIGH PRESSURE, HEAVY DUTY


description:
HOT WATER OPERATING PRESS. 850 P.S.I., FLOW RATE 3 GPM, STEAM FLOW RATE 2 GPM AT 200 P.S.I., OIL FIRED, 2 H.P. ENGINE 1725/3450 RPM, ELECTRIC, 110 VOLT AC, 60HZ SINGLE PHASE, CAPACITOR START, 50 FT. HOSE, INSULATED WAND, POSITIVE METERING DEVICE, 4 GAL. FUEL TANK


description:
WASHER, HIGH PRESSURE, COLD WATER, HEAVY DUTY


description:
5 GPM CAPACITY AT 3000, ENGINE - 17 H.P. MIN., TWIN CYL., ELEC. START, 12 VOLT BATTERY, GAS DRIVEN, DIRECT DRIVE; 4 GAL. TANK, 50 FT. 1/2 IN. I.D. HOSE WITH 3500 PSI WORKING PRESSURE, INSULATED WAND W/TRIGGER SHUT-OFF


description:
36 IN. L X 15 IN. W, HEAVY DUTY, W/3 IN. STEEL ROLLERS, NAPA NO. 815-6223 OR EQUAL


description:
36 IN. L X 16 IN. W, W/ HEAD REST, 3 IN. ROLLER HDWE. FRAME


description:
CASTER, 3 IN. STEEL ROLLER, 3-1/2 IN. FLAT TOP BRACKET, SIX 1/4 IN. MTG. HOLES, SWIVEL, H.D.


description:
Grinders, Cylinder Hone and Valve Seat; Portable Boring Machines; Hones; and Boring Bars


description:
HONE, MED. RANGE, 2 IN. - 7 IN. I.D., FLEX SHAFT W/ADJ. TENSION, F/ENGINES


description:
STONE SET, ENG. CYL., 4 IN. HONE, SNAP-ON, 3 STONES F/2 IN. - 6-3/4 IN. DIA. CYLINDERS


description:
Hand Tools, Automotive Air Conditioning (Including Refrigerant Charging Equipment)


description:
AIR CONDITIONER SERVICE CENTER, PORTABLE, VEHICLE W/VACUUM PUMP


description:
24-1/2 IN. W X 44 IN. H X 20 D, APPROX. 115 LBS., STEEL CABINET W/CONTROL CONSOLE AND GAUGES, 115 VOLT, 60 HZ, 1.2 CFM, VACUUM RATING 29.99 IN. HG, VACUUM PUMP OIL RESERVOIR 5CZ, 8 FT. RED AND BLUE HOSES, R-12 CAP. - BLUE TANK (30 LBS. MAX.)


description:
HAND HELD, TORCH TYPE, INCLS. 14.1 OZ. PROPANE BOTTLE, SEARCH HOSE AND BRASS   BURNER


description:
Hand Tools, Special Automotive: Brake Tools, Body and Fender Dollies, Hand Operated Pullers, Mechanic's Inspection Mirror, etc. (For Hardware See Class 450)


description:
RAILROAD OR GENERAL PURPOSE, 2-3/8 IN. X 2-3/4 IN. X 2-31/32 IN.


description:
SEMI-ELLIPTICAL HEEL, 1-3/16 IN. X 2-3/8 IN. X 3-1/4 IN.


description:
PLIERS, AUTO, SPECIAL (OTHER THAN BRAKE)


description:
BATTERY PLIERS, 30 DEGREE ANGLE, 7-7/8 IN. LONG


description:
CHAIN CUTTING PLIERS, WEED #707 OR EQUAL


description:
CHAIN CUTTING PLIERS, WEED NO. 711 OR EQUAL


description:
SPARK PLUG TERMINAL PLIERS, COVERED HANDLES INSULATE TO 25,000 VOLTS, 7-1/2IN. LONG


description:
BALANCER, HARMONIC, SPAN 1-1/2 IN. TO 5 IN.


description:
BALANCER, HARMONIC, 6 TON, 1-1/2 IN. TO 5 IN. JAW SPAN, W/SLOTTED TIP


description:
BATTERY TERMINAL PULLER, CONVENTIONAL TYPE


description:
BEARING SEPARATOR & PULLER, 5-13/16 IN. WIDE, COMPLETE


description:
BEARING PULLER ATTACHMENT, SPREAD 3/8 IN. TO 4-5/8 IN., POWERTEAM 1123 OR EQUAL


description:
CROSSARM, 6 IN. LONG, CAP SCREW, SLOTTED


description:
CROSSARM, 7 IN. LONG WITH JAW POSITIONING GUIDE


description:
CROSSARM, 11 IN. LONG WITH JAW POSITIONING GUIDE


description:
HAMMER, SLIDE, 4 LB., 5/8 IN. - 17 THRD., W/24 IN. T-HOLE, W/PULLER HOOK, F/POST PULLER


description:
HOOK, PULLER, STEEL, BLACK, 4 IN. L X 3/8 IN. W, 5/8 IN. NC FEMALE THREAD ONE END, 90 DEG. HOOK OTHER END


description:
INSIDE JAW, 3-13/64 IN. LONG, 1-47/64 IN. YOKE TO HOOK


description:
LEGS, FOR PUSH-PULLER, 28 IN., 22 LBS., POWERTEAM 1111 OR EQUAL


description:
MECHANICAL, GEAR AND BEARING, 5 TON CAPACITY, 2/3 JAW, MAX REACH 5-1/2 IN., MAX SPREAD 7 IN.


description:
MECHANICAL, GEAR AND BEARING, 5 TON CAPACITY, LONG 2 JAW, MAX REACH 5-1/2 IN., MAX SPREAD 6 IN.


description:
MECHANICAL, GEAR AND BEARING, 7 TON CAPACITY, 2/3 JAW, MAX REACH 5 IN., MAX SPREAD 10-1/2 IN.


description:
OUTSIDE JAW, 4-19/32 IN. LONG, 3 IN. YOKE TO HOOK


description:
JAW, STRAIGHT, 7-1/8 IN. REACH, F/10 TON, 2-WAY, W/11 IN. SPREAD PULLER


description:
JAW, STRAIGHT, HEAVY DUTY, F/10 TON, 2-WAY W/11 IN. SPREAD PULLER


description:
PULLER NUT, KNURLED, REVERSIBLE, ADJUSTING NUT, 2-1/2 IN. DIA.


description:
PULLER SET, HEAVY DUTY, 11 PC., 10 TON, 2-WAY, STRAIGHT, SPREAD 10 IN., W/METAL BOX, SINGLE REACH 2-15/16 IN. - 7-1/8 IN., DBL. REACH 2-15/16 IN. - 18IN.


description:
PUSH, 10 TON CAPACITY, MAX REACH 8-3/8 IN., SPREAD 2-1/8 TO 7-1/4 IN., W/LEGS AND LEG ENDS, POWERTEAM NO. 927 OR EQUAL


description:
PULLER SET, MEDIUM, 6 TON, 2-WAY, STRAIGHT, 7 IN SPREAD, W/BOX


description:
PUSH, 30 TON CAPACITY, MAX REACH 10-1/2 IN., SPREAD 7 TO 16-1/4 IN.,  POWERTEAM NO. 939 OR EQUAL


description:
REAR AXLE HAMMER PULLER, 5-1/3 LB. HAMMER, 4 SLOT ADAPTER


description:
REVERSIBLE JAW, 3-1/2 IN. LONG, 2 IN. YOKE TO HOOK


description:
SCREW, 11-7/16 IN. LONG, 5/8 IN. HEX HEAD


description:
SCREW, 11-13/16 IN. LONG, 3/4 IN. HEX HEAD, W/DET. TIP


description:
SLOTTED CAP SCREW PULLING CROSSARM, 6 IN. WIDE


description:
SMALL DETACHABLE TIP FOR PULLER SCREW, 1/4 IN. DIA.


description:
STANDARD DETACHABLE TIP FOR PULLER SCREW, 60 DEGREE TAPER


description:
STEERING WHEEL & HARMONIC BALANCER PULLER, COMPLETE


description:
STUD PULLER KIT, AC-DC ALL STEEL ELECTRODES, 3/32 IN. F/ 5/8 IN. DIA. AND 1/8 IN. F/ OVER 5/8 IN. DIA., USED TO REMOVE REMAINS OF BROKEN STUD


description:
STUD REMOVER, COMPLETE, 1/2 IN. DRIVE, 1-3/16 IN. DIA., 3-1/2 IN. LONG


description:
STUD REMOVER, COMPLETE, 3/4 IN. DRIVE, 2 IN. DIA., 5-1/8 IN. LONG


description:
TERMINAL PULLER, CONV. TYPE, F/BATTERIES


description:
TIMING GEAR JAW, 7-3/16 IN. FROM CROSSARM TO HOOK


description:
TIP, PULLER, 3/4 IN. STD. TIP X 7/16 IN. DIA., 60 DEG. F/6 TON PULLER


description:
TIP, PULLER, 4-1/8 IN. L X 7/8 IN. I.D. W/ 5/8 IN. I.D. AND 11-NF THREAD X 11/16 IN. W X 9/32 IN. W/HOOK ON TIP, STEEL


description:
V-BELT PULLING ATTACHMENT, SPREAD 1-3/4 IN. TO 5-7/8 IN., POWERTEAM 679 OR EQUAL


description:
BENDIX BRAKE ADJUSTING TOOL, FOR STAR NUTS ON TWO-SHOE BENDIX BRAKES, 1-3/4IN. SPOONS, 9 IN. LONG


description:
BRAKE ADJUSTING TOOL FOR CHEVROLET, 1-3/16 IN. AND 1-7/16 IN. SPOONS 7 IN. LONG


description:
BRAKE ADJUSTING TOOL FOR CHEVROLET, 1-3/16 IN. & 1-7/16 IN. SPOONS, 7-1/4 IN. LONG


description:
BRAKE BLEEDER WRENCH, 3/8 IN. AND 5/16 IN. HEX ENDS


description:
BRAKE BLEEDER WRENCH, 3/8 IN. AND 1/4 IN. HEX ENDS


description:
BRAKE CYLINDER HONE, 27/32 IN. TO 2 IN., FLEX, 3 STONE, FOR ELEC. DRILLS - LISLE NO. 10000 OR EQUAL


description:
BRAKE CYLINDER STONE SET, 1-1/8 IN. HONE, F/SNAP-ON 3/4 IN. - 2-1/2 IN. DIA. CYL., 240 GRIT, 3 STONES/SET


description:
BRAKE CYLINDER STONE SET, 2 IN. HONE, F/SNAP-ON 3/4 IN. - 2-1/4 IN. DIA. CYL., 220 GRIT, 3 STONES/SET


description:
BRAKE PLIERS, ALL PURPOSE, 12-7/8 IN. LONG, 1.05 LB.


description:
BRAKE PLIERS, ALL PURPOSE, 13-1/2 IN. LONG


description:
BRAKE SHOE TOOL, FOR USE ON RETAINING WASHER OF SPRING ASSEMBLY, 6-3/32 IN. LONG


description:
BIT SET, TORQUE, - PIECE, 1/4 IN. DRIVE, INCLS. SIX 1/4 IN., AND THREE 3/8 IN. ON RAIL


description:
COMPRESSOR, PISTON RING, BAND OPERATING RATCHET, 2-1/8 IN. - 5 IN. RANGE


description:
COMPRESSOR, PISTON RING, 3-1/2 I. BAND WIDTH, FOR 2-1/8 IN. TO 5 IN. DIA.


description:
FILE, BODY, CURVED TEETH ON BOTH SIDES, 7/IN., 14 IN. LONG, 1-3/8 IN. WIDE


description:
FILE, BODY, CURVED TEETH BOTH SIDES, FOR PLASTIC BODY FILLERS, 1-3/8 IN. WIDE X 14 IN. LONG


description:
FILE HOLDER, ALUMINUM, FOR BODY FILE, 16 IN. LONG


description:
FUEL FILTER WRENCH, 2-1/4 IN. X 2-9/16 IN. DIA.


description:
GRAB ALL, 17-1/2 IN. LONG, SPRING LOADED, FLEXIBLE


description:
GRAB ALL, 26 IN. LONG, SPRING LOADED, FLEXIBLE


description:
IGNITION REPAIR SET, 11 PC., IN ROLL UP TYPE PLASTIC KIT


description:
LAPPING TOOL, FOR VAC. CUP VALVE GRINDER, WITH 1-1/2 IN. AND 1-3/8 IN. RUBBER CUPS - KD NO. 505 OR EQUAL


description:
MAGNETIC RETRIEVING TOOL, POCKET TYPE W/CLIP - 6 IN.


description:
MAGNETIC RETRIEVING TOOL, TELESCOPIC, 16-3/4 IN. TO 26-3/4 IN.


description:
OIL FILTER REMOVAL TOOL, SELF LOCKING & ADJUSTING


description:
OIL FILTER TOOL, SELF LOCKING, 6 IN. MAX. ADJ., F/1/2 IN. DR. RATCHET, W/NYLON STRAP


description:
OIL FILTER WRENCH, UNIV., 2-1/4 IN. TO 2-9/16 IN. RANGE, 7 IN. HANDLE, 1 IN. STEEL STRAP


description:
OIL FILTER WRENCH, UNIV., METAL, 2-1/4 IN. TO 2-9/16 IN. DIA.


description:
OIL FILTER WRENCH, FOR 3-3/8 IN. TO 3-3/4 IN. FILTERS, BLACK OXIDE, F-HEX 1/2 IN. OR M-HEX 1 IN.


description:
OIL FILTER WRENCH, UNIV. METAL, 3-7/16 IN TO 3-3/4 IN. DIA.


description:
OIL FILTER WRENCH, UNIV. METAL, 4 IN. TO 4-3/8 IN. DIA.


description:
OIL FILTER WRENCH, 3-1/2 IN. TO 3-3/8 IN., STEEL BAND W/HANDLE


description:
OIL FILTER WRENCH, 3-1/2 IN. SPAN, METAL BAND W/HANDLE


description:
OIL FILTER WRENCH, UNIV., METAL, 4 IN. TO 4-3/8 IN. DIA.


description:
OIL FILTER WRENCH, HEAVY DUTY, 4-1/8 IN TO 4-21/32 IN. DIA.


description:
OIL FILTER WRENCH, 3 IN. DIA. OR SMALLER


description:
OIL FILTER WRENCH, HEAVY DUTY, ASTOL GRIP, 4-1/4 IN. MAX. RANGE, F/ SPIN-ON FILTERS


description:
OIL FILTER WRENCH, BAND TYPE, 4-21/32 IN. THRU 5-5/32 IN. DIA., FOR 1/2 IN. DRIVE WRENCH


description:
OIL FILTER WRENCH, 5-1/2 IN. HANDLE F/3-1/2 IN. DIA. SPIN-ON FILTER


description:
OIL FILTER WRENCH, W/270 DEG. SWIVEL HANDLE, FITS 3-1/4 IN. TO 3-7/8 IN., STEEL, 1 IN. BAND, VINYL HANDLE


description:
OIL FILTER WRENCH, 7-3/4 IN. HANDLE F/2-3/4 IN. DIA. SPIN-ON FILTER


description:
OIL FILTER WRENCH, CAP TYPE, FITS 3 IN. DIA. SPIN-ON OR 76MM, FOR USE WITH 3/8 IN. OR 1/2 IN. DRIVE RATCHET


description:
OIL FILTER WRENCH, CAP TYPE, F/3-1/2 IN. DIA. SPIN-ON FILTER


description:
PITMAN ARM PRY BAR, 20 IN. LONG, 1-1/4 IN. FORK OPENING


description:
SCRAPER, GASKET, PLASTIC HANDLE, ALLOY STEEL, 11-1/4 IN. LONG, 1-1/2 IN. WIDE BLADE


description:
SHOCK ARM TOOL, 16 IN. LONG, 21/32 IN. FORK OPENING


description:
SPREADER FILLER AUTOBODY PLASTIC RE-USABLE, ASSORTED SIZES, 3/PKG.


description:
PROF. TYPE, 14 IN., BULB AND CLEAR TUBE, COLOR CODED AND CALIBRATED


description:
RUBBER SUCTION BULB TYPE, OVAL PLASTIC HOUSING W/FLUID LEVEL GAUGE AND INDICATOR, ETHYLENE GLYCOL, 34 TO 227 DEG. FREG.


description:
SQUEEZE BULB TYPE, SMALL, CLEAR TUBE W/ FLOATING BALL, W/O PLASTIC CASE


description:
SQUEEZE BULB TYPE, 4 IN. CLEAR TUBE W/TEMP. READ-OUT, 4 IN. RUBBER HOSE


description:
14-1/2 IN. LONG, BULB END AND SPOUT, W/ 8-1/2 IN. GLASS READ OUT AND CLEAR CODED FLOAT


description:
1/4 IN. X 3 IN. L, CLEAR PLASTIC, DISPOSABLE DIP/READ FOR MEASURING NALCOOL2000 AND 3000 CONC. IN COOLING SYSTEM AND ANTI-FREEZE WATER SOL. - 50/PKG


description:
Jacks, Safety Stands, Portable Cranes, and Parts (For Automobiles, Trucks, and Transmissions)


description:
CRANES, HYDRAULIC, PORTABLE & STATIONARY


description:
PORTABLE, 1,000 LB. CAPACITY, LENGTH BASE 54 IN., WIDTH BASE 29-1/2 IN., HEIGHT 62 IN., WEIGHT 165 LBS.


description:
PORTABLE, 2,000 LB. CAPACITY, LENGTH BASE 72 IN., WIDTH BASE 35 IN., HEIGHT68-1/2 IN., WEIGHT 278 LBS.


description:
PORTABLE, 2 TON CAPACITY, TELESCOPIC BOOM, 52 IN. MIN. BOOM HT. TO 127 MAX. HT., BASE 88-1/2 IN. L X 45 IN. W, 1/2 IN. CHAIN SIZE


description:
TRUCK OR DOCK MOUNT, 1000 LB. CAP., 360 DEG. SWIVEL, TELESCOPING BOOM, INCLUDES MOUNTING WELL AND CHAIN W/HOOK, APPROX. WT. 120 LBS.


description:
1-1/2 TON CAP., 5-1/16 IN. X 3-1/4 IN. BASE, APPROX. WT. 8 LBS., 15/16 IN. RAM DIA., 14-1/4 IN. MAX. HEIGHT, (STD CTN-6 EA)


description:
3 TON CAP., 5-5/8 IN. X 3-3/4 IN. BASE, APPROX. WT. 13 LBS., 1-1/4 IN. RAM DIA., 17-9/16 IN. MAX. HEIGHT


description:
6 TON CAP., 5-13/16 IN. X 4-1/4 IN. BASE,  1-1/2 IN. RAM DIA., 16-5/8 IN. MAX. HEIGHT


description:
8 TON CAP., 7-5/8 IN. X 4-5/8 IN. BASE, APPROX. WT. 20 LBS., 1-3/4 IN. RAM DIA., 20 IN. MAX. HEIGHT


description:
8 TON CAP., LOW DIMENSION, 6-5/6 IN. X 4-5/8 IN. BASE, 1-3/4 IN. RAM, LOW HT. 5-1/2 IN., HIGH LIFT 8-1/2 IN.


description:
12 TON CAP., 8-5/16 IN. X 5-1/2 IN. BASE, APPROX. WT. 25 LBS., 2 IN. RAM DIA., 18-1/16 IN. MAX. HEIGHT


description:
3/4 TON (1500 LB.) CAP., RATCHET TYPE BUMPER JACK, 1-1/4 IN. TO 27-1/4 IN. MAX. HT.


description:
1 TON CAP., RATCHET TYPE, 6 IN. X 8 IN. BASE, 26-3/4 IN. MAX. HEIGHT


description:
1-1/2 TON CAP., SCISSORS TYPE, 7 IN. X 5 IN. BASE, APPROX. WT. 11 LBS., 14-1/2 IN. MAX. HEIGHT


description:
1-1/2 TON CAP., BUMPER GRIP (HOOK) TYPE HIGH LIFT, 5-1/8 IN. X 3-3/8 IN. BASE, APPROX. WT. 18 LBS., 41-1/2 IN. MAX. HEIGHT


description:
1-1/2 TON CAP., BUMPER GRIP (HOOK) TYPE, HIGH LIFT, W/O HOOK, 5-1/8 IN. BASE, 40 IN. MAX HT.


description:
1-1/2 TON CAP., BUMPER GRIP HIGH LIFT (HOOK) TYPE, WITHOUT HOOK, 5-1/8 IN. 3-3/8 IN. BASE, APPROX. WT. 15 LBS., 40 IN. MAX. HEIGHT


description:
1-1/2 TON CAP., SCISSORS TYPE, 7-1/4 IN. X 4 IN. BASE, APPROX. WT. 22 LBS., 4-3/4 IN. LOW HEIGHT, 14-1/4 IN. MAX. HEIGHT, LIN NO. W93472 OR EQUAL


description:
7000 LB. CAP., HI-LIFT UTILITY TYPE, LIFTS, SPREADS, CLAMPS, OR WINCHES. LIFTING NOSE DRILLED FOR AUX. CLEVIS PIN TO ATTACH CHAINS OR CABLES FOR PULLING OR HOISTING. 4 IN. X 7 IN. BASE, LOW HEIGHT 4-1/2 IN., LIFT HEIGHT 41-1/2IN., MIN. WEIGHT 32 LBS.


description:
7000 LB. CAP., 51 IN. HT., 4 IN. X 7 IN. BASE


description:
AIR/HYDRAULIC, 20 TON CAP., BASE SIZE 8 IN. X 5-1/2 IN., APPROX. WT. 72 LBS LOW HEIGHT 9-1/4 IN., LIFT HEIGHT 17-7/8 IN., SEMI-PNEUMATIC TIRES, HANDLE LENGTH 50 IN.


description:
HYDRAULIC, 1-1/4 TON CAP., PORTABLE, SADDLE, LOW 4-1/2 IN., MAX. LIFT HEIGHT 18-3/4 IN., CHASSIS LENGTH 24 IN., MAX. APPROX. WT. 70 LBS.


description:
HYDRAULIC, 1-1/2 TON CAP., 7-1/2 IN. DIA. SADDLE, 20 IN. MAX. HEIGHT, APPROX. WT. 88 LBS.


description:
HYDRAULIC, 2 TON CAP., 5 IN. MIN. SADDLE HT., 16-1/2 IN. MAX. SADDLE HT., 25 IN. CHASSIS LENGTH, 24-3/4 IN. HANDLE LENGTH, HEIN WERNER NO. 68054 OR EQUAL


description:
HYDRAULIC, 2 TON CAP., 6 IN. DIA. SADDLE, 23 IN. CHASSIS LENGTH, WILMAR NO. W1611 OR EQUAL


description:
HYDRAULIC, 2 TON CAP., 7-1/2 IN. DIA. SADDLE, 24 IN. MAX. HEIGHT, APPROX. WT. 119 LBS.


description:
HYDRAULIC, 2 TON CAP., 7-1/2 IN. DIA. SADDLE, 25 IN. MAX. HEIGHT, APPROX. WT. 144 LBS.


description:
HYDRAULIC, 3 TON CAP.,  ENERPAC NO. JH-3 OR EQUAL


description:
HYDRAULIC, 4 TON CAP., 7-1/2 IN. DIA. SADDLE, 25 IN. MAX. HEIGHT, APPROX. WT. 180 LBS.


description:
HYDRAULIC, 8 TON CAP., 5-1/2 IN. TO 8-1/2 IN. MAX. HT., 1-3/4 IN. RAM, 6-5/6 IN. X 4-5/8 IN. BASE


description:
HYDRAULIC, 8 TON CAP.,  ENERPAC NO. JH-8 OR EQUAL


description:
HYDRAULIC, 10 TON CAP., PUSH-PULL, W/ HOSE ATT.


description:
HYDRAULIC, 10 TON CAP., STEEL FORGED TOE, NO KICK BACK, REMOVABLE PUMP, 9 IN. TRAVEL, 20 IN. CLOSED HEIGHT, SIMPLEX NO. TJ109 OR EQUAL


description:
HYDRAULIC, 10 TON CAP., W/SEPARATE QUICK TAKE UP SYSTEM FOR SADDLE W/O LOAD HANDLE, 40 IN. TO 42 IN. LONG, COUNTER BALANCE, W/3 LOCKING POSITIONS, 68 IN. TO 70 IN. LONG FRAME LENGTH, WEAVER NO. WA75-B OR EQUAL


description:
HYDRAULIC, 10 TON CAP., 7-1/4 IN. DIA. SADDLE, 26-1/2 IN. MAX. HEIGHT, APPROX. WT. 372 LBS.


description:
HYDRAULIC, 20 TON CAP., 8 IN. DIA. SADDLE, LOW SADDLE PT., 7 IN. HIGH, 25 IN. ROLLER BEARING EQUIPPED WHEELS, APPROX. WT. 580 LBS.


description:
32 IN. LIFT, 14 IN. GEAR, 5000 LB., FULTON NO. JA514T OR EQUAL


description:
CENTER MOUNT, FOR TRAILERS, FARM MACHINERY OR INDUSTRIAL EQUIP., HEAVY GAUGE STEEL CASTER 6 IN. X 2 IN. REMOVABLE. WEIGHT CAPACITY 2000 LBS.


description:
SWIVEL MOUNT, ROTATES TO 4 POSITIONS OR SWIVELS COMPLETELY OUT OF WAY. WEIGHT CAPACITY 2000 LBS.


description:
SWIVEL MOUNT, ROTATES TO 4 POSITIONS OR SWIVELS COMPLETELY OUT OF WAY. WEIGHT CAPACITY 5000 LBS.


description:
BULLDOG, 1,000 LB. CAP., 8 IN. - 17 IN. MAX. LIFT


description:
BULLDOG, 5,000 LB. CAP., ADJ. 11 IN. - 21 IN. MAX. HT., TRAILER TONGUE MT.


description:
BULLDOG, 5,000 LB. CAP., SCREW TYPE, TONGUE MT.


description:
DROP LEG TYPE, TOP WINDING, 7,000 LB. CAP., MAX HT. 49-1/4 IN. W/ 13-1/2 IN. DROP LEG


description:
DROP LEG TYPE, 10,000 LB. MAX., 38-5/8 IN. MAX., W/4-3/4 IN. SQ. LEG, 3 X 9-3/4 IN. FOOT


description:
SCREW TYPE, 1 TON CAP., 9 IN. MAX. HT., 10 FT. TRAVEL DIST.


description:
SCREW TYPE, 1 TON, TONGUE MOUNT, TOP WIND, SWIVEL W/MOUNTING HDWE., HEIGHT RETREACTED 15 IN., EXTENDED 30 IN., SOUTHWEST WHEEL NO. G6KJ3 OR EQUAL


description:
SIDE MT., 2,000 LB. CAP., 24 IN., SIDE WIND W/FOOT PLATE AND FOLD AWAY HANDLE


description:
SWIVEL TONGUE MT., 2,000 LB. CAP., 2 FT. - 3-1/2 FT. MAX. HT.


description:
TOP WINDING, 2000 LB. CAP., TUBE MOUNT, 15 IN. TRAVEL, 15 IN. BRACKET HEIGHT (CLOSED), 19 IN. OVERALL HEIGHT, G TYPE MOUNT, 5/8 IN. PIN


description:
HYDRAULIC, 1/4 TON CAP., 36-1/2 IN. LIFTING RANGE, FOOT OPERATION, 4-WAY CONTROL, APPROX. WT. 124 LBS.


description:
HYDRAULIC, 1/2 TON CAP., 6-1/4 IN. - 31 IN. LIFTING RANGE, APPROX. WT. 100 LBS.


description:
HYDRAULIC, 1-TON CAP. 9-1/4 IN. TO 44-1/4 IN. LIFTING RANGE, TO INCLUDE ALLADAPTERS FOR HANDLING EVERY OVER-THE-ROAD TRUCK TRANSMISSION, DIFFERENTIAL, FRONT OR REAR POWER UNITS, APPROX. WT. 270 LBS.


description:
MECHANICAL, 1/2 TON CAP., 3 IN. TO 27 IN. LIFTING RANGE, APPROX. WT. 133 LBS.


description:
TRUCK, 1 TON CAP., HEAVY DUTY, W/DIFFERENTIAL ADAPTER


description:
3/4 TON CAP., HYDRAULIC WHEEL DOLLY, WITH 1-1/2 TON CAP. JACK, LIFT 5-1/2 IN., CHASSIS HEIGHT 29 IN., WIDTH 37-1/4 IN., LENGTH 24-3/8 IN., ARM SPREAD26-5/8 IN., APPROX. WT. 118 LBS.


description:
1-1/2 TON CAP., AIR, LIFTING RANGE 9 IN. TO 40 IN., SADDLE SPAN 17-1/4 IN.-57-1/4 IN., EQUIPPED WITH POSITIVE LOCKING DEVICE. APPROX. WT. 190 LBS.


description:
1-1/2 TON CAP., HYDRAULIC, 6 IN. X 4-1/2 IN. SADDLE PAD, LIFTING RANGE 9-1/4 IN. - 33 IN., SADDLE SPAN 20 IN. - 59 IN., SADDLE CLEARANCE TO FRAME 17 IIN. MIN., APPROX. WT. 177 LBS.


description:
2-1/2 TON CAP., AIR, LIFTING RANGE 10 IN. - 38-1/4 IN., SADDLE SPAN 19-1/4 IN. MIN., AIR RATED LOAD 150 PSI., APPROX. WT. 275 LBS.


description:
CONTROL, PENDANT, WITH 15 FT. CABLE, 3 CONDUCTOR, 4 PRONG MALE PLUG, 2 POSITION TOGGLE SWITCH, AUTOCRANE NO. 330519 OR EQUAL


description:
PARTS, AUTOMOTIVE JACK (BRAND LISTED OR EQUAL)


description:
BRACKET, MOUNTING, STEEL, 2 IN. O.D. X 1-1/2 IN. I.D. W/ 5/8 IN. DIA. PIN HOLE, F/SWIVEL JACK


description:
PARTS AND ACCESSORIES, HOIST (TRUCK MOUNTED)


description:
CABLE, CONTROL, DEL NO. CT614120 OR EQUAL


description:
CABLE, CONTROL, 5 FT., DEL NO. 61454  OR EQUAL


description:
COUPLING, RUBBER, BROWNING NO. JS4N  OR EQUAL


description:
COUPLING, VIBRATOR DRIVE, BROWNING NO. CHJP41 OR EQUAL


description:
COUPLING, VIBRATOR DRIVE, BROWNING NO. CHJP458 OR EQUAL


description:
MOTOR, VIBRATOR, PRESTOLITE NO. MDT-6020  OR EQUAL


description:
SPRING, CHAIN CHECK, DEL NO. DD-101 OR EQUAL


description:
SWITCH, VIBRATOR, COLE HERSEE NO. 24046 OR EQUAL


description:
SWITCH, VIBRATOR, COLE HERSEE NO. 24106 OR EQUAL


description:
VALVE, HYDRAULIC CONTROL, DEL NO. SVA 175 OR EQUAL


description:
8 TON CAPACITY, HYDRAULIC PUNCH, 1 IN. STROKE LENGTH, 3/4 IN. RAM ADJ., PUNCH 3/16 IN. MILD STEEL, PUNCH 1-7/16 IN. HOLES IN 14 GA. MILD STEEL, 24 IN. MAX. THROAT DEPTH, 10 IN. RAM HT.


description:
12 TON CAPACITY, INCLUDES 12 TON JACK, WIDTH 21-1/2 IN., HEIGHT 72 IN., WORKING RANGE 6-1/2 IN. TO 44 IN., WEIGHT 168 LBS.


description:
12 TON CAPACITY LESS JACK, WIDTH 21-1/2 IN., HEIGHT 72 IN., WORKING RANGE 2-3/8 IN. TO 34 IN., WEIGHT 168 LBS.


description:
25 TON CAP. INCLUDES 25 TON JACK, HEIGHT 75 IN., WORKING RANGE 3-1/2 IN. TO39-1/2 IN., WEIGHT 310 LBS.


description:
2 TON CAP., 10-7/8 IN. - 17-1/4 IN. RANGE, 8 IN. X 9 IN. BASE, APPROX. WT. 17 LBS./PR.


description:
5 TON CAP., 15-3/8 IN. - 24-3/4 IN. RANGE, 10 IN. X 12 IN. BASE, APPROX. WT30 LBS./PR.


description:
10 TON CAP., 18-7/8 IN. - 30-3/8 IN. RANGE, 13 IN. X 13 IN. BASE, APPROX. WT. 72 LBS/PR.


description:
ENGINE STAND, 750 LB. CAP., 360 DEGREES ROTATING HEAD SLOTTED FOR EXTRA ADJUSTMENTS. TWO 4 IN. DIA. WHEELS AND ONE 4 IN. DIA. LOCKING CASTER, APPROX. WT. 75 LBS.


description:
ENGINE STAND, 1250 LB. CAP., 360 DEGREES ROTATING HEAD SLOTTED FOR EXTRA ADJUSTMENTS. TWO 4 IN. DIA. WHEELS AND ONE 4 IN. DIA. LOCKING CASTER, APPROX.103 LBS.


description:
STAND, AUTOMATIC TRANS., 1250 LB. CAP., 360 DEG. ROTATING HEAD, HOLDS ALL ALLISON TRANS., BALL-BEARING CASTERS FOR EASY MANEUVERING, APPROX. WT. 75 LBS.


description:
MOUNTING BRACKET W/SNAP RING F/1000 LB. JACK STAND


description:
Lights, Drop, and other Remote Work Lights (With Cords)


description:
60-100 WATT, STEEL WIRE GUARD, CLOSE END CAGE, GROUNDED CONVENIENCE OUTLET W/U-SHAPED GUARD W/REFLECTOR & SWITCH LAMP


description:
75-100 WATT, LESS CORD WITH WIRE GUARD AND REFLECTOR NEOTEX RUBBER SAFETY YELLOW HANDLE AND SOCKET WOODHEAD 106


description:
100 WATT, SAFETY YELLOW PRO TEK CLOSED END GUARD W/REFLECTOR SIDE OUTLET AND SWITCH DANIEL WOODHEAD 106US


description:
100 WATT, LESS CORD WITH GUARD SWITCH GROUNDED PLASTIC 130 VOLT APPLETON REH LGSR


description:
25 FT., 18 GA., 3 COND., INSULATED, W/CAGE


description:
25 FT., 115 VOLT, 60 HZ, 15W LAMP, TYPE 18/2 SJT W/3 COND. PLUG, W/REEL


description:
25 FT., W/O REEL, 16 GA., 3 CONDUCTOR, W/SHIELD


description:
50 FT., W/O REEL, 16 GA., 3 CONDUCTOR, W/SHIELD


description:
GUARD, PLASTIC - STANDARD NO. ZM81 OR EQUAL


description:
GUARD, PLATED STEEL - STANDARD NO. ZM80 OR EQUAL


description:
HANDLE, VINYL, 3 COND. W/O CORD OR GUARD


description:
HANDLE, VINYL, W/SIDE OUTLET, 660 WATT, 250 VOLT, 3 CONDUCTOR


description:
HOLDER, W/GUARD, HANDLE AND SWITCH, W/REFLECTOR, HEAVY DUTY GUARD IS HINGED FOR OPENING, W/O CORD


description:
REEL, 50 FT. RETRACT., 3 PRONG, 18 GA., 7 AMP, 180 IN. WALL MT. W/ OUTLET


description:
SOCKET, SWITCHED LAMP, TROUBLE LIGHT REPLACEMENT


description:
SWITCH, DROPLIGHT, 660W - 250V, PUSH THROUGH TYPE, SWITCH AND SOCKET


description:
SWITCH, DROPLIGHT, 660W-250V, PUSH THRU TYPE, SWITCH AND SOCKET


description:
54 IN. H, 24 IN. DIA. BASE X 5-1/2 IN. X 27 IN. UPRIGHT SECTION, PLASTIC CONSTRUCTION, 120 VOLT POWER, INCLS. COOLING FAN, 14 FT. CORD, INCANDESCENT LAMP, WOBBLE LIGHT NO. WL001 OR EQUAL


description:
TURN BRAKE DRUMS 6 IN. THRU 20 IN. W/MIN. 6 IN. DEPTH CUT, RESURFACE BRAKE ROTORS THRU 13 IN. DIA., 100 LB. MIN., 3/4 H.P. MOTOR, 110 VAC, 60 HZ, SINGLE PHASE, NEUTRAL SAFETY SWITCH, WORK LIGHT, CUTTING MODES - DRUM TO ROTOR AND ROTOR TO DRUM, CENTERING CONE, WORK BENCH INCL. MICROMETERS, CARBIDE INSERTS, LIMIT GAUGES.


description:
Lifts and Hoists, Floor Type: Electric, Hydraulic, or Pneumatic


description:
800 LB. MIN. CAP., 48 IN. LIFT HT., 23 IN. WIDE FULL HEIGHT


description:
30 TON CAP., WIRED FOR 240 VOLTS, SEFAC NO. 1200M65BG OR EQUAL


description:
PARTS, AUTOCRANE HOIST (AUTOCRANE OR EQUAL)


description:
GEAR BOX, HOIST ASSEMBLY, WITH MOTOR, NO. B-3000


description:
GEAR BOX, SWING ASSEMBLY, WITH MOTOR, NO. B-3059


description:
ADAPTOR, FOR LIFTING SMALL WHEELED VEHICLES


description:
BEAM, CROSSBEAM, MOUNTED ON SWIVEL CASTERS W/LOCKS, 10 FT. 6 IN. LONG, 8 FT. 6 IN. DISTANCE BETWEEN JACK FORKS, 8 IN. MIN. BEAM WIDTH, 2/SET


description:
PACKING KIT F/ 8-1/2 IN. O.D. FRONT LIFT CYL. ON 5R810, 2 POST HOIST


description:
PACKING KIT F/ 10-5/8 IN. O.D. REAR LIFT CYL. ON SR810, 2 POST HOIST


description:
STAND, HOIST SUPPORT, PORTABLE, 16.5 TON CAP., 2 WHEEL, 47 IN. WIDE, 54 IN. MIN. HT., 79 IN. MAX. HT., 10 PIN POSITIONS


description:
Lubrication Equipment: Guns, Hoses, Fittings, Lubricators, Oil Pumps, etc. (Including Oil Filter Presses)


description:
ADAPTERS, LUBRICATION EQUIPMENT AIR HOSE


description:
1/4 IN. AIR HOSE ADAPTER - SCHRADER NO. 8281-11 OR EQUAL


description:
5/16 IN. AIR HOSE ADAPTER - SCHRADER NO. 1097-11 OR EQUAL


description:
3/8 IN. FNPT AIRE HOSE ADAPTER - SCHRADER NO. 1096-11 OR EQUAL


description:
3/8 IN. NMPT AIR HOSE ADAPTER - SCHRADER NO. 1095-11 OR EQUAL


description:
6 IN., EXTENSION ADAPTER, ADDS EXTRA LENGTH TO CONTROL VALVES, CONSISTS OF PUSH TYPE CONTACT NOZZLE AND HYDRAULIC COUPLER LOCKING SLEEVE


description:
11-1/2 IN., FLEXIBLE EXTENSION ADAPTER, INCLUDES HYDRAULIC COUPLER LOCKING SLEEVE, WIRE BRAID HOSE/METAL GUARD ASSY., HYDRAULIC COUPLER


description:
NEEDLE-TYPE ADAPTER FOR CONTACTING HARD-TO-REACH FITTINGS IN CLOSE QUARTERS. INCLUDES NOZZLE & LOCKING SLEEVE.


description:
6 IN. LONG, EXTENSION, HYD. PUSH TYPE, 7/16 IN. O.D. NOZZLE W/O VENT


description:
2-3/4 IN. DOME SHAPE TOP, 1-1/4 IN. THICK W/MOLDED RING, F/STOP AGAINST HUB3/8 IN. FROM INNER SIDE


description:
AIR LINE, 1/4 IN. FNPT, QUICK DISCONNECT, 30 CFM, 10 PSI - STEWART WARNER NO. 307112 OR EQUAL


description:
STANDARD DUTY, AIRLINE, MPT THREAD, 1/4 IN., 30 CFM, QUICK-DISCONNECT


description:
3/8 IN. FNPT, QUICK-CHANGE, 30 CRM, 10 PSI, F/ PWR. EQUIP.


description:
2 IN. O.D. X 7/16 IN. I.D., 1-7/8 IN. L, MALE, BRASS, QUICK-CHANGE, PUSH TYPE


description:
HOSE, HYDRAULIC, 3/4 IN. MALE NPT - LAWTON NO. 11998 OR EQUAL


description:
GREASE GUN, STANDARD, 1/8 IN. F-NPT, W/BALL CHECK F/POWER GUN


description:
LIGHTWEIGHT, 30 CFM AIR FLOW, 1/4 IN. NPT (F)


description:
QUICK COUPLER, 2 PIECE, 5/16 IN. DIA X 2-3/8 IN. LONG


description:
SMALL DIAMETER HYD. COUPLER FOR USE WITH HAND GUNS ONLY. 1/8 IN. NPTF


description:
STANDARD DIAMETER FOR CONTACTING HYD. FITTINGS. 1/8 IN. NPT (F)


description:
SWIVEL, HYDRAULIC, 1/8 IN. NPT (F), 360 DEG., MAX. WP 10,000 PSI


description:
SWIVEL HYDRAULIC, STANDARD 360 DEG. ADAPTER, LOCKS IN 8-45 DEG. POSITIONS. ANGLE BODY HAS 1/8 IN. NPT (F) INLET.


description:
SWIVEL HYD. NARROW DIAMETER, WITH 3 SETS OF REPLACEMENT JAWS AND SEALS. LENGTH 4 IN.


description:
SWIVEL, HYDRAULIC, 1/4 IN. FNPT X 1/4 IN.


description:
SWIVEL, HYDRAULIC, 1/4 IN. MNPT X 1/4 IN.


description:
SWIVEL, HYDRAULIC, 90 DEG., MALE 1/2 IN. NF AND FEMALE 1/4 IN. NPT


description:
SWIVEL, Z TYPE, 1/4 IN. X 1/2 IN. - 27 NPTF X NC


description:
SWIVEL, Z TYPE, THREE-WAY, W 3/8 IN. NPT X 1/2 IN. NPT


description:
4-3/8 IN. L X 2-1/4 IN. W X 2-1/4 IN. H, W/ 1/2 IN. PT, ALUMINUM, F/ AIR BRAKES


description:
CUPS, OIL, SIGHT FEED, FOR USE IN STATIONERY BEARINGS, ENGINES, MACHINERY


description:
GLASS BODY BRONZE FIN 5 OZ 3/8 INCH P.T.


description:
24 GAUGE, STEEL, SEAMLESS, WELDED CONSTRUCTION, W/LARGE REMOVABLE FUNNEL, LOCKING TELESCOPE TUBE, & 5 GAL. CAP. CAN W/EMPTYING SPOUT


description:
MOBILE, USE WITH 15 GAL., 120 LB. OPEN TOP DRUM (DRUM NOT INCL.) INCLS. 4-CASTER BASE, DRUM COVER, TELESCOPIC DRAIN BOWL ADJUSTABLE FROM 39-3/4 IN. TO65-3/4 IN., HINGED LID SERVES AS SPLASH GUARD


description:
PORTABLE. INCLS. DRAIN BOWL W/ADJ. LID, TELESCOPIC STAND, ADAPTER BUSHING FOR ASSY. TO 2 IN. NPT, BUNG OPENING WASTE OIL DRUM. BOWL CAP. 4-1/2 GALS. XT. ENDS FROM 47 IN. TO 72 IN.


description:
PORTABLE, FOR USE W/16 GAL. OR 120 LB. OPEN TOP DRUMS, 4 CASTER BASE, DRUM COVER, TELESCOPIC DRAIN BOWL, ADJ. FROM EQUIVALENT OF 42 IN. - 70 IN., DRUM NOT INCLUDED, LINCOLN NO. 613 OR EQUAL


description:
SMALL DIAMETER HYD. COUPLER EXT. ADAPTER. INCLS. HYD. COUPLER AND 5-1/2 IN.T. TUBE 1/8 IN. NPT (M)


description:
6-3/4 IN. COUPLER EXT. F/ STD. HYD. 1/8 IN. NPT FTG. F/ MANUALLY OPR. GUN


description:
1/4 IN. NPTF, GIANT, BUTTON HEAD, 1-1/4 IN. LONG, 1/2 IN. SHANK


description:
1/8 IN. MPT, STD. BUTTON HEAD, 3/4 IN. L, THREADED, ALEMITE NO. A-1184 OR EQUAL


description:
1/8 IN. MPT, GIANT BUTTON HEAD, 1-5/32 IN. L, THREADED, ALEMITE NO. 1831 OR EQUAL


description:
1/8 IN.,  9/16 IN. LONG,  7/32 IN. SHANK, GREASE ZERK FITTING, DRIVE TYPE


description:
1/8 IN. P.T., STRAIGHT, 23/32 IN. LONG, 19/64 IN. SHANK


description:
1/8 IN. PTF, STRAIGHT, IPT, 1-1/4 IN. LONG, 25/32 IN. SHANK


description:
1/8 IN. MPT, STRAIGHT, 11/16 IN. L, THREADED, ALEMITE NO. 1610BL OR EQUAL


description:
1/8 IN. PTF, STRAIGHT, 11/16 IN. LONG, 19/64 IN. SHANK


description:
1/8 IN. MPT, STRAIGHT, 1-3/8 IN. L, ONE END THREADED, 7/8 IN. L WITH 3/16 IN. THREADED HOLE THRU CENTER FOR GREASE FITTING


description:
1/8 IN. NPT STRAIGHT, 2-1/8 IN. LONG, GREASE ZERK FITTING


description:
1/8 IN., PTF, STRAIGHT, IPT, 1-3/4 IN. LONG, 1-17/64 IN. SHANK


description:
1/8 IN. NPT STRAIGHT, 2-5/8 IN. LONG, GREASE ZERK FITTING


description:
1/8 IN. THREAD PTF (SAE SHORT) LEAKPROOF, STRAIGHT, 23/64 IN. LONG, 5/1 IN. SHANK.


description:
1/8 IN. MPT, STRAIGHT, 1-1/4 IN. L, THREADED, ALEMITE NO. 1607B OR EQUAL


description:
1/8 IN. NPT, LEAKPROOF, 23/64 IN. THD, 7/16 IN. HEX, 7/32 IN. SHANK


description:
1/8 IN. NPT, 90 DEG., LEAKPROOF, 31/32 IN. LONG, 25/64 IN. SHANK


description:
1/8 IN. MPT, 90 DEG. ANGLE, 27/32 IN. L, THREADED, ALEMITE NO. 1613B OR EQUAL


description:
1/8 IN. MPT, 90 DEG. ANGLE, 1-13/16 IN. L, THREADED, ALEMITE NO. 1606B OR EQUAL


description:
1/8 IN. NPT, 30 DEGREE, ALEMITE NO. 1611B OR EQUAL


description:
1/8 IN. PTF, 30 DEG., 2-3/32 IN. LONG, 1/4 IN. SHANK


description:
1/8 IN. MPT, 45 DEG. ANGLE, 29/32 IN. L, THREADED, ALEMITE NO. 1688B OR EQUAL


description:
1/8 IN. MPT, 45 DEG. ANGLE, PIN TYPE, 1-1/2 IN. L, THREADED, ALEMITE NO. A-684 OR EQUAL


description:
1/8 IN. MPT, 90 DEG. ANGLE, PIN TYPE, 1-1/16 IN. L, THREADED, ALEMITE NO. A-358 OR EQUAL


description:
1/8 IN. PTF, 90 DEG., 27/32 IN. LONG, 3/16 IN. SHANK


description:
1/8 IN. MPT, PIN TYPE, 1 IN. L, THREADED, ALEMITE NO. A-336 OR EQUAL


description:
1/8 IN. PTF, PIN TYPE, 31/32 IN. LONG, 17/64 IN. SHANK


description:
3/16 IN. THD, 65 DEG., NON-CORR., 1/4 IN. LONG, 7/16 IN. HEX, 27/32 IN. OVERALL


description:
1/4 IN.-28 THREAD, STRAIGHT, 11/16 IN. LONG, 23/64 IN. SHANK


description:
1/4 IN. MPT, STD. BUTTON HEAD, 53/64 IN. L, THREADED, ALEMITE NO. A-1186 OR EQUAL


description:
1/4 IN. MPT, STD. BUTTON HEAD, 7/8 IN. L, THREADED, ALEMITE NO. 1401 OR EQUAL


description:
1/4 IN. MPT, GIANT BUTTON HEAD, 1-1/4 IN. L, THREADED, ALEMITE NO. 1823 OR EQUAL


description:
1/4 IN. - 28 THREAD, STRAIGHT, 1/2 IN. LONG, 3/16 IN. SHANK


description:
1/4 IN. - 28 THREAD THD, STRAIGHT, 35/64 IN. LONG, 3/16 IN. SHANK


description:
1/4 IN.-28 THREAD, STRAIGHT, 35/64 IN. L, THREADED, ALEMITE NO. 1641-B OR EQUAL


description:
1/4 IN.-28 THREAD, 45 DEG. ANGLE, 19/64 IN. L, THREADED, ALEMITE NO. 1636-B1 OR EQUAL


description:
1/4 IN. MPT, 67-1/2 DEG. ANGLE, 1 IN. L, THREADED, ALEMITE NO. 1629B OR EQUAL


description:
1/4 IN.-28 THREAD, 90 DEG., 3/4 IN. LONG, 13/64 IN. SHANK


description:
1/4 IN. - 28 THREAD, THD, S-S, NON-CORR., 17/32 IN. LONG, 3/16 IN. SHANK


description:
1/4 IN. MPT, STRAIGHT, 29/32 IN. L, THREADED, ALEMITE NO. 1627B OR EQUAL


description:
1/4 IN. P.T., STRAIGHT, 7/8 IN. LONG, 27/64 IN. SHANK


description:
1/4 IN., STRAIGHT, ALEMITE NO. 1792 OR EQUAL


description:
1/4 IN. PTF, 65 DEG., 7/16 IN. HEX, 5/16 IN. SHANK, 13/16 IN. OVERALL


description:
5/16 IN. UNF-2A, SPEC. THREAD, 21/32 IN. LONG, 1/4 IN. SHANK


description:
3/8 IN. MPT, STD. BUTTON HEAD, 61/64 IN. L, THREADED, ALEMITE NO. A-1188 OR EQUAL


description:
1/2 IN. PTF, STRAIGHT, 1 IN. LONG, 5/16 IN. SHANK, 9/16 IN. HEX


description:
DRIVE TYPE, FOR 5/16 IN., 35/64 IN. LONG, 1/4 IN. SHANK


description:
DRIVE TYPE, STRAIGHT, 33/64 IN. LONG, 1/4 IN. SHANK, DRIVE DIAMETER 3/16 IN.


description:
DRIVE TYPE, .250/.253, 5/8 IN. LONG, 11/64 IN. SHANK


description:
DRIVE TYPE, STRAIGHT, 35/64 IN. LONG, 1/4 IN. SHANK, DRIVE DIAMETER 5/16 IN.


description:
DRIVE TYPE, 45 DEG., FOR 1/4 IN. DRILL, 7/8 IN. LONG, 9/32 IN. SHANK


description:
ELBOW BODY, 45 DEG., 1/4 IN. FOR 1/8 IN. M., 5/16 IN. THD, 7/16 IN. SHANK


description:
ELBOW, HYDRAULIC, SWIVEL TYPE, 13/16 IN. - 20 X 1/4 IN. FPT


description:
THREAD FORMING .256 IN., 13/16 IN. LONG, 13/64 SHANK


description:
THREAD FORMING, 1/4 IN. - 28 THREAD, THD, 37/64 IN. LONG, 13/64 IN. SHANK


description:
100 FITTINGS/KIT, IN. PLASTIC COMPARTMENTED BOX


description:
146 FITTINGS/KIT, ALL PURPOSE W/METAL CONTAINER


description:
1/8 IN. PTF, STD., BUTTON HEAD, 3/4 IN. LONG, 11/32 IN. SHANK


description:
1/4 IN. NPTF, STD., BUTTON HEAD, 7/8 IN. LONG, 15/32 IN. SHANK


description:
1/4 IN. NPTF, STD., BUTTON HEAD, 53/64 IN. LONG, 27/64 IN. SHANK


description:
1/2 IN. NPTF, STD., BUTTON HEAD, 1-1/16 IN. LONG, 35/64 IN. SHANK


description:
1/8 IN. NPTF, GIANT, BUTTON HEAD, 1-5/32 IN. LONG, 3/8 IN. SHANK


description:
3/8 IN. FLUSH TYPE, BUTTON HEAD, 49/64 IN. LONG, 39/64 IN. SHANK


description:
3/8 IN. NPTF, GIANT, BUTTON HEAD, 2 IN. LONG, 19/32 IN. SHANK


description:
1/2 IN. IPT, GIANT, BUTTON HEAD, 7/8 IN. LONG, 11/16 IN. SHANK


description:
1/2 IN. MPT, GIANT BUTTON HEAD FOR 8 IN. ROCKWELL VALVES


description:
3/4 IN. MPT, GIANT BUTTON HEAD FOR 12 IN.-16 IN. ROCKWELL VALVES


description:
METRIC, 6MM, 90 DEG., 19MM LONG, 10MM HEX


description:
CHASSIS, AIR OPERATED, 120 LB. CAP., 7 FT. HOSE, ALEMITE NO. 8503 OR EQUAL


description:
GEAR, AIR OPERATED, 120 LB. CAP., 7 FT. HOSE, ALEMITE NO. 8512-4 OR EQUAL


description:
BLOW GUN, FULL LINE AIR PRESSURE, 1/4 IN. NPT, 4 1/2 IN. L


description:
BUTTON TYPE BLOW-GUN, 1/4 IN. FEMALE NPT, 150 P.S.I. INLET PRESSURE, VENTED NOZZLE, HVY. DTY. DIE CAST BODY, EPOXY FINISH


description:
HIGH PRESSURE, HEAVY DUTY, LEVER TYPE, 24 OZ. CAP., 1 OZ./16 STROKES WITH EXTENSION


description:
HIGH PRESSURE, LEVER TYPE, 16 OZ. CAP., 1 OZ./36 STROKES, GUN ONLY LESS EXT. GUN OUTLET 1/8 IN. NPTF (F)


description:
HIGH PRESSURE, HEAVY DUTY, LEVER TYPE, 16 OZ. CAP., 3-WAY LOADING, 10,000 P.S.I., 1/8 IN. NPT-F


description:
HIGH PRESSURE, LEVER TYPE, 16 OZ. CAP., 1 OZ./36 STROKES, INCLS. HYDRAULIC EXTENSION


description:
LEVER TYPE BLOW-GUN, 1/4 IN. F-NPT INLET, 150 PSI, W/EXTENSION


description:
LEVER TYPE BLOW GUN, 1/4 IN. FEMALE NPT, RUBBER TIP, 6-1/2 IN. L


description:
LEVER TYPE BLOW-GUN, 1/4 IN. FEMALE NPT, 150 P.S.I. INLET PRESSURE, W/EXTENSION, VENTED NOZZLE, H.D. DIE CAST BODY, EPOXY FINISH


description:
LEVER TYPE BLO-GUN, 1/4 IN., BY-PASS,  DIAMOND NO. DU-512-S OR EQUAL


description:
LEVER TYPE GREASE GUN, STANDARD DUTY, 10,000 PSI, 3-WAY W/EXT.


description:
LEVER TYPE GREASE GUN, 11 IN., STANDARD SCREW-ON HEAD, 10,000 PSI, 1/8 IN. NPT


description:
LEVER TYPE GREASE GUN, HVY. DTY., 24-1/2 IN. LONG, 6 IN. NOZZLE, W/HYD. COUPLER, F/21 OZ. BULK OR 14-1/2 OZ. CARTRIDGE, ZINC PLATED, RUST PROOF BARREL, BLUED FINISH


description:
LUBRICATOR, WHEEL BEARING. HANDLES ALL WHEEL BEARINGS UP TO 6 IN. O.D.


description:
MEDIUM DUTY, LEVER TYPE, 6,000 P.S.I., 16 OZ. CAP., 1 OZ./21 STROKES, SPRING PRIMED DELY. INCLS. LOADER FITTING AND HYDRAULIC EXT. MAY BE SUCTION FILLED, POWER FILLED OR BY CARTRIDGE.


description:
PISTOL GRIP, 16 OZ., W/18 IN., HOSE AND COUPLER


description:
PUSH TYPE NOZZLE FOR HYDRAULIC PUSH TYPE & FLUSH TYPE FITTINGS 9 OZ CAPACITY


description:
PUSH TYPE FOR HYDRAULIC PUSH TYPE & FLUSH TYPE FITTINGS 1-3/4 LBS CAPACITY


description:
SUCTION GUN, 16 OZ. CAP., 1-1/2 IN. DIA. X 16 IN. LENGTH, 3 LB. WT.


description:
SUCTION GUN, 16 OZ. CAP., W/FLEXIBLE NOZZLE


description:
SUCTION GUN, 20 OZ. CAP., W/FLEX. NOZZLE


description:
TIP, RUBBER, FOR BLOW-GUN, 7/16 IN. - 17, 1/8 IN. NPS, DUAL THREAD DESIGN


description:
VOLUME GUN, LOW PRESSURE, LEVER TYPE, 16 OZ. CAP., 1 OZ./7 STROKES, WITH EXTENSION


description:
VOLUME GUN, HEAVY DUTY, LEVER TYPE, 24 OZ. CAP., 1 OZ/7 STROKES W/EXTENSION


description:
GUNS AND PARTS, GREASE (WALWORTH OR EQUAL)


description:
BAG, FLUID,  FOR MODEL 1699,  NO. 7099015


description:
CAP, SEALANT BARREL, FOR MODEL 1699,  NO. 7


description:
CUP, LEATHER, INNER, FOR MODEL 1699,  NO. 8H


description:
HOSE, HIGH PRESSURE, FOR MODEL 1699,  NO. 5


description:
SCREW, CHECK VALVE, FOR MODEL 1699,  NO. 11F


description:
3/8 IN. I.D. X 25 FT., NYLON, W/ 1/4 IN. MNPT FTG


description:
3/8 IN.I.D. X 25 FT. L, 3/8 IN. NPT MALE BOTH ENDS, 1250 P.S.I. BURST PRESSURE, LINCOLN NO. 72300A OR EQUAL


description:
3/8 IN. I.D. X 50 FT., W/1/4 IN. M-NPT COUPLER, 1300 P.S.I., ALEMITE NO. 317803-50 OR EQUAL


description:
BUTTON HEAD, STANDARD, 1/8 IN. MPT X 12 IN. LONG, ALEMITE NO. 7089 OR EQUAL


description:
BUTTON HEAD, GIANT, 1/8 IN. MPT X 18 IN. LONG, ALEMITE NO. 6704-B OR EQUAL


description:
FOR AIR OR WATER, 1/4 IN. I.D. X 50 FT. W/ 1/8 IN. M-NPT COUPLER, 1300 P.S.I.


description:
FOR GEAR LUBE DISPENSING BUCKET PUMP, 5-1/2 FT.


description:
FOR GREASE, 1/4 IN. I.D., 50 FT. X 1/2 IN.-27F, 20,000 PSI, W/F-NPT SWIVEL ENDS, ALEMITE NO. 31787550 OR EQUAL


description:
FOR GREASE GUN/PUMP EXTENSION WHIP TYPE FLEXIBLE W/SPRING MALE 12 IN. 1/8 IN. NPT


description:
FOR GREASE GUN, HIGH PRESSURE, 1/8 IN. MPT ENDS


description:
HYDRAULIC, 1/8 IN. MPT X 18 IN. LONG, ALEMITE NO. 6703-B OR EQUAL


description:
FOR GREASE GUN, 12 IN. POLY WHIP, W/O COUPLER, 1/8 IN. THREADS, TEST TO 12000 LB. WORKING PRESSURE


description:
FOR GREASE GUNS, 1/4 IN. I.D., 40 FT. X 1/2 IN. - 27F, 20,000 PSI W/F-NPT SWIVEL ENDS


description:
FOR LEVER GUNS & BUCKET PUMPS, 1-1/2 FT.


description:
FOR OIL PUMPS WIRE BRAID 1/2 IN. I.D. 5-1/2 FT. HOSE


description:
1/8 IN. MPT ENDS X 3/16 IN. I.D., 3 FT., MIN. 4,500 PSI


description:
FOR GEAR, ATF PUMPS, REELS, CONTROL VALVES, METERS, 7 FT.


description:
AXLE/HUB OILER, 3-1/2 IN. DIA., CLEAR PLASTIC W/OIL LEVEL GAUGE PRINTED ON FACE, INCL. GASKET AND VENT PLUG


description:
HANDLED TYPE, HAND OPERATED, 1 PT. CAP. WITH 9 IN. RIGID SPOUT.


description:
HANDLED TYPE, HAND OPERATED, 1 PT. CAP. WITH 9 IN. FLEX SPOUT.


description:
HANDLED TYPE, HAND OPERATED, 1 PT. CAP WITH 9 IN. RIGID, 30 DEG. BENT SPOUT


description:
PISTOL TYPE, HAND OPERATED, 5-1/2 OZ. CAP.,


description:
PISTOL TYPE, HAND OPERATED, 6 OZ. CAP WITH 6 IN. FLEX SPOUT & BASE HOLDER


description:
PISTOL TYPE, HAND OPERATED, 1 PT. CAP. WITH 6 IN. RIGID SPOUT.


description:
SPRAY TYPE, AIR OPERATED, 1 QT. CAP., ADJUSTABLE NOZZLE


description:
OIL PURIFIER, DELAVAL SEPARATOR CO. NO. 4933 OR EQUAL


description:
OIL PURIFIER, DELAVAL SEPARATOR CO. NO. 6750 OR EQUAL


description:
OIL PURIFIER, DELAVAL SEPARATOR CO. NO. 15186 OR EQUAL


description:
OIL PURIFIER, DELAVAL SEPARATOR CO. NO. 18586 OR EQUAL


description:
PLUG, FOR GREER 2-1/2 GAL. SERVICE ACCUMULATOR MODEL 30A, GARRETT FLUID CORP. NO. S1400-41 OR EQUAL


description:
SERVICE ACCUMULATOR, FOR GREER 2-1/2 GAL. , MODEL 30A, GARRETT FLUID COMP. NO. S1400-41 OR EQUAL


description:
HOSE, GREASE GUN, FLEXIBLE, FOR TUBE OR BULK GREASE, UNIVERSAL TYPE, PARKER HANNIFIN PLEWS NO. 10-214 OR EQUAL


description:
WASHER, WHITE PLASTIC, 1/4 IN. I.D., 5/8 IN. O.D., FOR SPRAYING SYSTEMS GREASE GUN


description:
BAG ASSY., FOR GREER 2-1/2 GAL. ACCUMULATOR MODEL 30A, W/2 O-RINGS, M.I. NO. 1819 OR EQUAL


description:
BEARING, PUMP, FOR DELAVAL LUBE OIL PUMP, NEW DEPARTURE NO. 3205 OR EQUAL


description:
CARTRIDGE, FILTER, 8-3/4 IN. LENGTH CONN. IN AND OUT, DOLLINGER NO. 84EN17J5 OR EQUAL.


description:
CARTRIDGE, FILTER, 7 IN. LONG, 1 IN. CONN. IN AND OUT, DOLLINGER NO. 84BN16J5 OR EQUAL.


description:
COIL, NO A.C., DISCHARGE VALVE HIGH PRESSURE OIL PUMP, AB NO. 32A11 OR EQUAL


description:
COIL, 115-124 VOLT DC, LUBE OIL SUCTION VALVE, AB NO. 56D155 OR EQUAL


description:
COIL, DISCHARGE VALVE HIGH PRESSURE OIL UNIT, 220/440 VOLT, SQUARE D NO. K821 OR EQUAL


description:
COUPLING, HALF, FC 20-1 IN., SHAFT COUPLING


description:
COUPLING, HALF, FA 20-3/4 IN., SHAFT COUPLING


description:
COUPLING, HALF, FC 20-5/8 IN., SHAFT COUPLING


description:
COUPLING, 3-JAW, FC 20, 1 IN. X 7/8 IN., PUMP TO MOTOR, M.I. NO. 1362 OR EQUAL


description:
COUPLING, MOTOR, PUMP TO MOTOR, M.I. NO. 1783 OR EQUAL


description:
HEATER, CENTRIFUGE, FOR DELAVAL OIL CENTRIFUGE, G.E. NO. 184-4-43142 OR EQUAL


description:
INSERT, COUPLING, RUBBER, XFCR 20, SHAFT COUPLINGS


description:
INSERT, COUPLING, RUBBER, FOR LUBE OIL PUMPS, BONDTREE NO. 3-B-21 OR EQUAL


description:
INSERT, COUPLING, LEATHER, 4-ARM COUPLING FOR LUBE OIL PUMPS


description:
INSERT, COUPLING, RUBBER, 6-ARM, FOR LUBE OIL PUMPS, LOVEJOY NO. 44-001-7 OR EQUAL


description:
INSERT, 3-JAW COUPLING, PUMP TO MOTOR, M.I. NO. 1804 OR EQUAL


description:
METERS, FLOW, 0-2 GPM, 0-2 ISO, BARTON NO. 257 OR EQUAL


description:
METERS, FLOW, 0-6 GPM, OIL FLOW TO PUMP BEARINGS, BARTON NO. 257 OR EQUAL


description:
PORT ASSY., FOR GREER ACCUMULATOR NO. A01-226, M.I. NO. 1857 OR EQUAL


description:
RING, RETAINING, FOR GREER 2-1/2 GAL. SERVICE ACCUMULATOR MODEL 30A, GREER NO. A104-204 OR EQUAL


description:
SWITCH, MAGNETIC OPERATOR, OIL FLOW INDICATOR


description:
THERMOCOUPLE, LEAD, CENTRIFUGE, M.I. NO. 1027 OR EQUAL


description:
AIR OPERATED, WITH DOLLY, FITS 25 AND 35 LB. PAILS OR 70 LB. BULK, 40-1 RATIO. INCLS. 6 FT. HOSE, SWIVEL AND CONTROL VALVE.


description:
AIR OPERATED CHASSIS PUMP COVER AND DOLLY, FITS 120 LB. DRUM, 50:1 RATIO, 6 FT. HOSE, Z-SWIVEL, CONTROL VALVE


description:
AIR LINE LUBRICATOR, 1/2 IN. F INLET/OUTLET, 175 P.S.I., 1-120 DEG. F, W/ DUAL SIGHT BOWL


description:
BUCKET TYPE, ALL LUBRICANTS, 35 LB. CAP. 2500 TO 5000 PSI,


description:
CONTAINER TYPE, FOR PRESSURE GUN GREASES, FITS 35 LB. PAIL, .3 OZ/STROKE INCLS. FOLLOWER PLATE, 6 FT. HOSE ASSY.


description:
CONTAINER TYPE FOR FLUID GEAR LUBRICANTS, FITS 400 LB. DRUM, 1 LB/6 STROKES. INCLS. 5 FT HOSE ASSY. W/CURVED NOZZLE.


description:
DRUM TYPE, LOW PRESSURE 4-1 RATIO, AIR OPERATED, FOR 400 LB. DRUM, 3-1/2 IN. DIA. MOTOR


description:
DRUM TYPE, LOW PRESSURE 6-1 RATIO. INCLS. DRUM COVER FOR 120 LB. DRUM


description:
DRUM TYPE, 6-1 RATIO, AIR OPERATED, FOR 120 LB. DRUM, 4-1/4 IN. DIA. MOTOR


description:
DRUM TYPE, HIGH PRESSURE 40-1 RATIO. INCLS. DRUM COVER FOR 120 LB. DRUM


description:
DRUM TYPE, HIGH PRESSURE, AIR OPERATED, 40-1 RATIO, FOR 120 LB DRUM, 4-1/4 IN. DIA. MOTOR


description:
DRUM TYPE, HIGH PRESSURE, AIR OPERATED, 40-1 RATIO, FOR 400 LB. DRUM, 4-1/4IN. DIA. MOTOR


description:
ELECTRIC, 25 LB. CAP., MOUNTED ON 3 WHEEL DOLLY. INCLS. FOLLOWER PLATE, HOSE ASSY, Z SWIVEL AND CONTROL VALVE, 3/4 HP.


description:
FOR GEAR LUBRICANT, CRANK OPERATED, 25 LB. CAP., 1/2 PINT PER CYCLE. , INCLS. AUTOMATIC AIR ELIMINATOR, 5-1/2 FT. HOSE, NOZZLE & HANDLE.


description:
FUEL TRANSFER TYPE, 12 VOLT DC INCL. 12 FT. HOSE AND NOZZLE


description:
HAND TYPE, 3/4 IN. FPT INLET, W/ 2 IN. ADAPTER AND 3/4 IN. THD. DISCHARGE SPOUT, 10 GPM, ROTARY CRANK


description:
HAND CRANK/PISTON TYPE, 10 GAL. PER 100 REVS., 1-1/2 IN. TO 2 IN. OPENING, 3/4 IN. STEEL SPOUT W/3/4 IN. GARDEN HOSE COUPLING, 7 IN. RUBBER DISCHARGE HOSE, W/3/4 IN. COUPLING ONE END & 3/4 IN CURVED NOZZLE ON OTHER, COMPLETE FOR 55 GAL. DRUM


description:
MULTI-MATERIAL TRANSFER TYPE, AIR OPERATED, FOR 400 LB. DRUM, W/4 FT. METALHOSE ASSY.


description:
OIL PUMP, 1 QUART STROKE, CRANK/PISTON TYPE, W/SWING ARM, DRIP PAN & TELESCOPING PIPE FOR 55 GAL. DRUM


description:
WHEEL BEARING LUB., HANDLES UP TO 6 IN. O.D. BEARINGS


description:
AIR SERVICE, W/25 FT. HOSE, CONNECTING HOSE, ADJ. BALL STOP AND MOUNTING BRACKETS


description:
AIR SERVICE, W/25 FT. HOSE, REEL, CONNECTING HOSE, ADJ. BALL STOP, AIR CHUCK


description:
AIR SERVICE, W/50 FT. HOSE, REEL, CONNECTING HOSE, ADJ. BALL STOP, COUPLER , REDUCING BUSHING, GAUGE-TYPE TIRE INFLATOR.


description:
AIR SERVICE, W/50 FT. X 1/2 IN. HOSE, 400 PSI WORKING PRESSURE, 800 PSI BURST PRESSURE, ADJ. BALL STOP, 1/2 IN. NPT QUICK DISCONNECT INLET/OUTLET, 5 IN. SLEEVE MIN., LATCH MECHANISMW/13 STOP POSITIONS


description:
AUTOMATIC TRANSMISSION FLUID SERVICE, W/20 FT. HOSE, CONTROL VALVE, ADJ. BALL STOP


description:
CHASSIS SERVICE, W/20 FT. HIGH PRESSURE HOSE, CONNECTING HOSE AND NIPPLE, ADJ. BALL STOP, UNIVERSAL SWIVEL, CONTROL VALVE AND MOUNTING BRACKETS


description:
CHASSIS LUBRICANT, HIGH PRESSURE REEL, 50 FT. HOSE, CONNECTING HOSE AND NIPPLE, ADJ. BALL STOP, UNIVERSAL SWIVEL, H.P. CONTROL VALVE


description:
GEAR LUBRICANT, REEL ASS'Y., 50 FT. HOSE, CONNECTING HOSE, ADJ. BALL STOP, VOLUME SHUT-OFF VALVE, STRAINER


description:
GEAR LUBE SERVICE, W/METERING SHUT-OFF VALVE, REEL ASS'Y., 50 FT. HOSE, CONNECTING HOSE, ADJ. BALL STOP, STRAINER


description:
MOTOR OIL SERVICE, W/20 FT. HOSE, CONNECTING HOSE, ADJ. BALL STOP, TOTALIZING METERING SHUT-OFF VALVE, STRAINER AND MOUNTING BRACKETS


description:
WATER SERVICE, W/19 FT. HOSE, CONNECTING HOSE, ADJ. BALL STOP, WATER BIBB COCK AND MOUNTING BRACKETS


description:
AIRLINE REG., 1/2 IN. F-NPT INLET/OUTLET, 0-120 DEG., 300 PSI


description:
BALANCED VALVE TYPE, FOR 1/2 IN. AIR LINE


description:
STANDARD VALVE TYPE, FOR 1/4 IN. AIR LINE


description:
MANUAL DRAIN, METAL BOWL, 1/2 IN. AIR INLET, MIN. 175 PSI, 120 DEG. F, 6 OZ. CAP.


description:
MANUAL DRAIN, METAL BOWL, 1/2 IN. AIR INLET, 110 CFM, 250 P.S.I., 120 DEG F, 8 OZ. CAP.


description:
1/4 IN. MALE TO 1/2 IN. FEMALE, U-SHAPED


description:
CONTROL VALVE STANDARD, DELIVERS PRE-SET MEASURED SHOTS OR CONTINUOUS FLOW.INCLS. 6-1/2 IN. HYDRAULIC EXTENSION, HYDRAULIC COUPLER


description:
CONTROL VALVE DELUXE, FULL FLOW OR MEASURED SHOTS, BUILT-IN 3 STAGE STRAINER, 6-1/2 IN. HYDRAULIC EXTENSION, HYD. COUPLER VALVE INLET 1/4 IN. NPTF(F)


description:
METERING FOR A.T. FLUID, W/FLEX. HOSE ASSEMBLY, NON-DRIP NOZZLE, FILTER, WITH TOTALIZER AND SWIVEL, GRAD. IN GALLONS


description:
METERING, FOR GEAR LUBRICANTS, 8 PINT DIAL W/1/4 PT. GRAD., WITH TOTALIZER,SWIVEL & STRAINER


description:
METERING, FOR MOTOR OILS, 16 QUART DIAL (BLUE) W/1/4 GAL. GRAD., WITH TOTALIZER, SWIVEL & STRAINER


description:
AIR BLOW GUN VALUE. REGULATES DISCHARGE PRESSURE TO 30 P.S.I. REGARDLESS OF INCOMING LINE PRESSURE. VALUE INLET: 1/4 IN. NPTF (F)


description:
WATER BIBB COCK, FOR ATTACHING TO WATER SERVICE HOSE. THUMB-ACTION TRIGGER AND STRAINER IN NOZZLE. 3/4 IN. INLET; 11-1/2 IN. THREAD.


description:
Mechanic's Equipment and Tools (Not Otherwise Classified)


description:
Parts Washing Equipment Including Air Agitated and Pump Agitated (Also See 075-19)


description:
1-1/8 IN. DIA. X 2-3/4 IN. X 11 IN. LONG, NO. 10 NYLON


description:
2-1/2 IN. DIA. ROUND POLY. BRISTLE HEAD, 10 IN. LONG, 5-1/2 IN. HANDLE AND 25 IN. HOSE


description:
3 IN. POLYPRO TAPERED BRISTLES, 8 IN. HANDLE, 11 IN. LONG, 3-1/2 IN. CIRCUMFERENCE, 1-1/4 IN. DIA. BRISTLES,  GRAYMILLS NO. 1A190 OR EQUAL


description:
3 IN. DIA. ROUND, BRISTLE HEAD, 7-3/16 IN. LONG, 1-1/2 IN. LONG BRISTLES, CLEANRITE NO. 4B327 OR EQUAL


description:
Presses and Pullers, Machine Powered (Including Frame Alignment)


description:
Reclamation Equipment, Automotive (Including Refrigerant Recovery)


description:
Recycled Automotive Products (Not Otherwise Classified)


description:
ADDITIVES, COOLANT, FOR RECYCLING ANTI-FREEZE


description:
DYE, COOLANT, HIGH SILICATE, PROTAXYNE, YELLOW, 5 GAL./BUCKET


description:
DYE, COOLANT, LOW SILICATE, HIGH NITRIDE FORMULA, PROTAXYNE, YELLOW, 5 GAL./BUCKET


description:
HIGH SILICATE, 3 PART, THREE 11 OZ. BTLS/PKG., LESS THAN 350 PPM SILICON


description:
HIGH SILICATE, 5 PC, KIT INCLUDES 2 QTS. NETAMOX BLUE AND 1 QT. PROTAZYNE YELLOW ADDITIVE, 1 PRIMARY FILTER AND 1 SECONDARY FILTER, RECYCLES 45 GALLONS ANTI-FREEZE, WYNN'S XTEND NO 10198 OR EQUAL


description:
LOW SILICATE, 2 PARTS, LESS THAN 230 PPM SILICON, TWO 11 OZ. BOTTLES/PKG.


description:
LOW SILICATE, 5 PC, KIT INCLUDES 2 QTS. NETAMOX BLUE AND 1 QT. PROTAZYNE YELLOW ADDITIVE, 1 PRIMARY FILTER AND 1 SECONDARY FILTER, RECYCLES 45 GALLONS ANTI-FREEZE, WYNN'S XTEND NO. 10188 OR EQUAL


description:
AIR FILTER, FORD NO. 314531127W OR EQUAL


description:
Reel and Hose Assemblies, Air and Water Dispensing


description:
Refinisher Products (Including Polish and Body Filler, For Paint See Class 630)


description:
BODY FILLER, PLASTIC, W/HARDENER, LIQUID


description:
BODY FILLER, FLEXIBLE WHITE PLASTIC, WHITE STAR #104 OR EQUAL, 3#/CAN


description:
BODY FILLER, PLASTIC, SILK SOLDER W/HARDENER


description:
BODY FILLER, PLASTIC, SUPER STRENGTH, SHORT STRAND, WATERPROOF, FIBERGLASS RE- ENFORCED


description:
BODY FILLER, PUTTY, 12 LB., W/4 OZ. TUBE OF CREAM HARDENER, BONDO NO. 264 OR EQUAL


description:
STRIP, BLACK, 60-1 FT. LONG, 20 YD./BOX, 3M NO. 8578 OR EQUAL


description:
STRIP, WHITE, 60-1 FT. LONG, 20 YDS./BOX


description:
COLD WELD, FOR USE ON STEEL, BRASS OR BRONZE, TWO 1 OZ. TUBES/PKG.


description:
COLD WELD, METAL, EPOXY (2-PART),  J B WELD NO. 8265-S OR EQUAL


description:
CHROME POLISH, CLEANS, SHINES, REMOVES RUST, 16 OZ./CAN


description:
COMPOUND, CLEANS/POLISHES, 14 OZ., SPRAY, DYNAMITE OR EQUAL


description:
COMPOUND, CLEANS-WAXES-RESTORES, DUPONT RAIN DANCE NO. 0245N OR EQUAL - 10 OZ/ CAN


description:
COMPOUND, CLEANS-WAXES-RESTORES, DELCO CLEAN AND SHINE NO. 1167 OR EQUAL - 14 OZ/ CAN


description:
COMPOUND, RUBBING, DUPONT NO. 0861N OR EQUAL - 10 0Z/CAN


description:
COMPOUND, RUBBING, 16 OZ./CAN, H.D. CLEANER, RESTORES FINISH - PRESTON AS-923 OR EQUAL


description:
LIQUID CAR WAX, 450 ML/CAN, 12/CASE, TURTLE WAX OR EQUAL


description:
PASTE WAX, 16 OZ/CAN - PRESTONE NO. AS-904 OR EQUAL


description:
PROTECTANT, VINYL AND RUBBER, AUTOMOTIVE


description:
24 OZ/BOTTLE, CONTAINS POLYETHYLENE GLYCOL MONOLAURLOXY, CHEMSEARCH NO. 4093 OR EQUAL


description:
BENCHES, BRAKE MACHINE, STEEL, HAND OPERATED


description:
BRAKE AND CLUTCH VACUUM SYSTEM, VEHICLE, HEAVY DUTY, TO REMOVE ASBESTOS FIBERS


description:
TO BE EQUIPPED WITH A HEPA FILTRATION SYSTEM, 3 FILTER STAGES MIN., MANOMETER MEASURING FILTER CONDITION, A BRAKE ENCLOSURE AND A CLUTCH ENCLOSURE, TWO ELECTRIC MOTORS, 115 VOLT, MIN. 220CFM AIR INTAKE, MIN. 10 FT. LONG,. 2 IN. DIA. HOSE


description:
Shop and Mechanic's Equipment and Supplies, Recycled


description:
Specialty Products: Carburetor Cleaning Compound, Radiator Flush and Stop Leak, Transmission Sealing Compound, Water Pump Lubricant, Windshield Washer Solvent, etc.


description:
3/8 IN. DIA. SELF-ADHESIVE STAND, PLASTIC, W/REPLACEABLE COPPER CIRC. DISC ATTRACTOR, 5/8 IN. DIA., PREVENTS ADVERSE EFFECT ON SULFURIC ACID ON BATTERIES


description:
AEROSOL, CLEANER/PROTECTANT, CONTAINING A DYE INDICATOR, 18 OZ/CAN, AMERICAN IND. SUPPLY NO. BC89 OR EQUAL


description:
1-3/8 IN. O.D., FELT, F/ CLEANING TERMINALS, IMPREGNATED - 50/CAN


description:
1-3/8 IN. O.D., FELT, RING, IMPREGNATED - 100/CAN


description:
FELT PAD F/CLEANING BATTERY POSTS - 2/PGK


description:
SEALER, BATTERY TERMINAL, 12 OZ. AEROSOL CAN, CONTAINS ETHYL ACETATE AND 1, 1, 1-TRICHLOROETHANE, AMERICAN IND. SPLY. NO. BTS90 OR EQUAL


description:
14-18 OZ. CAN, CLEANER/DEGREASER/POLISH, NON-STREAKING AND SPOTTING CONCENTRATE, LIQUID


description:
BATTERY TERMINAL CLEANER, 13 OZ. AEROSOL CAN


description:
BODY CLEANING SOLVENT, TO REMOVE GREASE AND TAR


description:
BODY CLEANING SOLVENT, TO REMOVE GREASE AND WAX


description:
BRAKE CLEANER, 18 0Z. AEROSOL CAN, FLAMMABLE, NON-CHLORINATED, CONTAINS HEXANE, ISOPROPYL ALCOHOL, AND CARBON DIOXIDE, AMERICAN IND. SUPPLY NO. 4007 OR EQUAL


description:
BRAKE AND PARTS CLEANER, 20 OZ. CAN, SILOO OR EQUAL


description:
CARBURETOR CLEANER, AEROSOL CAN - 12 OZ.


description:
CARBURETOR CLEANER, AEROSOL CAN, CCM/1035 OR EQUAL - 12 OZ. CAN


description:
CARBURETOR CLEANER, AEROSOL CAN, MAS/CB24 OR EQUAL - 18 OZ. CAN


description:
CARBURETOR CLEANER - DELCO X55-5 OR EQUAL


description:
CARBURETOR AND COMBUSTION CLEANER - 500ML/CAN


description:
CARBURETOR AND FUEL INJECTOR CLEANER, 12-24 OZ/CTR


description:
CARBURETOR AND METAL PARTS CLEANER, FOR COLD WATER IMMERSION CLEANING - 5 GAL./DM. W/5 GAL. FLUID W/O BASKET


description:
CARBURETOR AND METAL PARTS CLEANER, FOR COLD WATER IMMERSION CLEANING - 5 GAL./DM. W/3 GAL. FLUID WITH BASKET


description:
CHAMOIS CLEANER CONC., 1 CAP/5 GAL WATER SOFTENS


description:
CLEANER/PROTECTOR, 32 OZ. BTL., "DRI WASH-N-GUARD" COMPLETE WITH 8 OZ. PUMP SPRAY OR EQUAL


description:
COMBUSTION CHAMBER CLEANER, 12 OZ/SPRAY CAN, KLEEN-FLO NO. 822 OR EQUAL


description:
CONTACT CLEANER, AEROSOL, 12 OZ. CAN, WD-40 NO. 40015 OR EQUAL


description:
CONTACT CLEANER, AEROSOL, 16 OZ. CAN, NON-FLAM., STATIC FREE


description:
CONTACT CLEANER, 24 OZ. CAN, CHEMTRONICS NO. 2400 OR EQUAL


description:
CONTACT CLEANER, DRY, 25 OZ. CAN, UNIV., NON-FLAMMABLE, STATIC FREE


description:
COOLING SYSTEM CLEANER, 11 OZ./CAN - 12/CTN.


description:
COOLING SYSTEM CLEANER, 16 OZ./ CAN, F/ RADIATOR


description:
COOLING SYSTEM CONDITIONER, CATERPILLAR NO. 3P2044 OR EQUAL


description:
COOLING SYSTEM TREATMENT, NALCOOL 2000 OR EQUAL


description:
COOLING SYSTEM TREATMENT, NALCOOL 3000 OR EQUAL


description:
COOLING SYSTEM TREATMENT, NALCOOL 3000 OR EQUAL - 1/2 GAL. CAN


description:
COOLING SYSTEM TREATMENT, NALCOOL 2000 OR EQUAL - 1/2 GAL. CAN


description:
COOLING SYSTEM TREATMENT, NALCOOL 2001 OR EQUAL - 1/2 GAL. CAN


description:
DECAL REMOVER, 16 OZ. AEROSOL CAN, NOT HARMFUL TO PAINT


description:
DEGREASER, 5 GAL., PEN NO. 4205 OR EQUAL


description:
DEGREASER CLEANER, WATER SOLUBLE, 100% ORGANIC, DE-TAR VEHICLES, 16 OZ. AEROSOL CAN


description:
ELECTRIC EQUIP. CLEANER AND DEGREASER - 16 OZ./CAN


description:
ELECTRICAL CLEANER, 20 OZ./CAN, NON-FLAMMABLE, NON-CONDUCTIVE


description:
ELECTRONICS EQUIP. CLEANER - 20 OZ. SPRAY CAN


description:
ENGINE CLEANER AND DEGREASER - 12 OZ. AEROSOL CAN


description:
ENGINE CLEANER AND DEGREASER - 16 OZ./CAN


description:
ENGINE CLEANER AND DEGREASER, HVY. DTY. - 7 GAL./BUCKET


description:
FUEL INJECTION ADDITIVE, 12 OZ/BTL. - 10/CS.


description:
FUEL INJECTOR CLEANER, LIQUID, 12 OZ/BOTTLE


description:
FUEL INJECTION CLEANER, NON-AEROSOL, LIQUID, 12 OZ./CAN W/BLADDER, 3M NO. 08912 OR EQUAL


description:
FUEL INJECTOR CLEANER, 22 OZ./BTL. (GASOLINE)


description:
FUEL INJECTOR CLEANER SPRAY,  OTC NO. 7000 OR EQUAL


description:
FUEL INJECTOR CLEANER, 350ML/BOTTLE,  KLEEN-FLO NO. 695 OR EQUAL


description:
GENERAL PURPOSE CLEANER, 22 OZ. BTL. - 12/CTN.


description:
RADIATOR CLEANER, 10 0Z./CAN, REMOVES RUST, LOOSENS SCALE


description:
RADIATOR CLEANER, ANTI-RUST, 12 OZ./CAN - 12/CTN.


description:
RADIATOR CLEANER, CORR. INHIBITOR AND COOLANT STAB.


description:
RADIATOR CLEANER, 16 OZ. CAN, CERTIFIED LABS NO. 4295 OR EQUAL


description:
RADIATOR CLEANER, 1 LB/CAN, DUPONT NO. 2131 OR EQUAL


description:
RELEASE AGENT SOLVENT, 10-1/2 IN. AEROSOL CAN, FLAMMABLE AND TOXIC, FOR REMOVAL OF AUTOMOTIVE WINDOW GLASS, KENT IND. NO. 30125 OR EQUAL


description:
RUBBER PROTECTANT, TO CLEAN, PRESERVE AND PROTECT TIRES


description:
RUST REMOVER, NAVAL JELLY TYPE, LOCTITE "DURO TM" NO. NJ-2 OR EQUAL


description:
SUPER CLEANER, INSTANT, LPS NO. 00755 OR EQUAL


description:
TAR REMOVER SOLVENT, AEROSOL, 16 OZ. CAN, SAFE F/AUTO FINISHES


description:
TAR REMOVER, SOYCLEAN, ALL PURPOSE INDUSTRIAL CHEMICAL SOLVENT, LIQUID, 5 GAL/CONTAINER


description:
TAR AND WAX REMOVER, SILICONE - 1 GAL/CAN


description:
TAR AND WAX REMOVER, SILICONE - 5 GAL/CAN


description:
TIRE CLEANER, FOAM TYPE, PROTECTS, CLEANS AND SHINES W/O WIPING, 14 OZ. AEROSOL CAN


description:
TUNE-UP KIT, FUEL SYSTEM, 3 PART, LIQUID, 16 OZ. CONTAINERS INCL. FUEL INJ. AIR INTAKE CLEANER, VALVE INJ. COMB. CLEANER AND FUEL SYS. CLEANER


description:
UPHOLSTERY CLEANER, 22 OZ. CAN - 12/CTN.


description:
UPHOLSTERY CLEANER, QUART, GENERAL PURPOSE, LIQUID, FOR VINYL, VELOUR, CARPETS


description:
VINYL AND RUBBER PROTECTIVE CLEANER, 8 OZ. BTL. - 12/CTN.


description:
VINYL AND RUBBER PROTECTIVE CLEANER, 16 OZ. CAN - 12/CTN.


description:
VINYL AND RUBBER PROTECTIVE CLEANER, 32 OZ. CAN


description:
VINYL AND RUBBER PROTECTIVE CLEANER, GAL. CAN


description:
VINYL AND RUBBER PROTECTANT, 16 OZ. PLASTIC BOTTLE


description:
VINYL AND RUBBER PROTECTANT, 32 OZ./ BTL


description:
WINDSHIELD WASHER FLUID W/ANTI-FREEZE AND BUG REMOVER


description:
WINDSHIELD WASHER FLUID, PRE-MIXED, -25 DEGREES F, 55 GAL/DRUM


description:
10 OZ/TUBE, DISPLACES HEAT, IMPROVES CONNECTION, BURNDY NO. DC178181059255 OR EQUAL


description:
ALCOHOL, EVAP., ANTI-FREEZE FLUID F/AIR BRAKES


description:
16 OZ. BOTTLE, ANTIFREEZE ADDITIVE, INCREASES CORROSION PROTECTION AND LUBRICATES WATER PUMP, CERTIFIED LAB. NO. 50227 OR EQUAL


description:
150 ML/BOTTLE,  (FOR ENGINES W/FUEL INJECTORS)


description:
50 ML/TUBE, GASKET ELIMINATOR, LOCTITE NO. 51531 OR EQUAL, 6/PACKAGE


description:
ANTI-FRICTION, HEAT RESISTANT, 16 OZ. AEROSOL CAN


description:
ANTI-FRICTION GEL, 15 OZ./AEROSOL CAN, TURNS TO GEL WHEN EXPOSED TO AIR, PENETRATING ACTION, MADISON BIONICS NO. M174 OR EQUAL


description:
ANTI-RUST AND WATER PUMP LUBRICANT, 12 OZ. CAN - 12/CTN.


description:
ANTI-SEIZE COMPOUND, 16 OZ/CAN, LAWSON LUBRI-TEMP NO. MARKXXII OR EQUAL


description:
ANTI-SEIZE LUBRICANT, 10 OZ. CAN, BRUSH TOP, W/ RUST INHIBITOR


description:
ANTI-SEIZE LUBRICANT, 12 OZ. AEROSOL CAN, HIGH TEMPERATURE FOR HIGH SPEED, WD-40 OR EQUAL


description:
ANTI-SEIZE LUBRICANT, 16 OZ. AEROSOL CAN, MOLYBENEN AND GRAPHITE W/ PETRO BASE COMP.


description:
ANTI-SEIZE COMPOUND, LUBRICANT AND SEALER, METALLIC


description:
CLEANING, 12 OZ/PRESSURE CAN, 12 CANS/CASE, LUBRISIL OR EQUAL


description:
COPPER PLATING COMPOUND, ANTI-SEIZE, -60 DEG. F TO + 1800 DEG. F - 1/2 PINT/CAN


description:
DIELECTRIC COMPOUND, 1 OZ/TUBE - 12 TUBES/BOX


description:
GASKET COMPOUND, COPPER COATED, AEROSOL, 16 OZ. CAN


description:
GASKET COMPOUND, COPPER COATED, AEROSOL, 16 OZ. CAN W/BRUSH, NOT FOR RUBBER GASKETS


description:
GASKET SOLVENT, PENETRATING, 16 OZ. AEROSOL CAN


description:
GRAPHITE LUB., POWDERED, 6.5 GRAMS OR 1/4 OZ.


description:
PENETRATING OIL, LUBRICATING, ANTI-RUST TYPE, TRIZOL NO. L134 OR EQUAL


description:
PENETRATING SOLVENT, 16 OZ./ CAN, CUTS RUST, GREASE, DIRT


description:
SILICONE, DI-ELECTRIC, 16 0Z/CAN - DELCO NO. D-1920 OR EQUAL


description:
SILICONE SPRAY LUB, 16 OZ/CAN - GOLD EAGLE NO. SL-15 OR EQUAL


description:
SOLVENT, SAFETY, LOCKTITE NO. 75559 OR EQUAL


description:
STICK LUBRICANT, 5 OZ., STAINLESS, STOPS RUST AND SQUEAKS


description:
STICK LUBRICANT, 1/4 IN. DIA., 4-1/4 IN. LONG, STAINLESS, STOPS STICKING AND RUST


description:
TIRE LUBRICANT, LIQUID, BALCAMP NO. 765-1338 OR EQUAL


description:
WINDSHIELD WASHER ANTI-FREEZE,  4 LITER/JUG,  4 JUGS/CASE


description:
WINDSHIELD WASHER ANTI-FREEZE, 205 LITER/DRUM


description:
WINDSHIELD WASHER SOLVENT, PRE-MIXED, TYPE B, 1 GAL/CONTAINER, 6 CTR/CASE, MEETING MICHIGAN SPEC. NO. 5215-S1, LATEST ISSUE


description:
WINDSHIELD WIPER SOLVENT, 6 OZ. BTL. - 12/CTN.


description:
5 OZ., SILICONE SEALER, MOIST SEALANT, DI-ELECTRIC, F/ SPARK PLUGS


description:
12 OZ., AEROSOL SPRAY CAN, NET WT. 9 OZ. - 12/CS


description:
12 OZ. SPRAY CAN, PENETRATING RELEASE AGENT


description:
16 OZ. AEROSOL SPRAY CAN, 12 OZ. NET WT. - 12/CS


description:
1-QT. CAN RUST COMPOUND, LIQUID, NON-TOXIC, LEAD AND ACID FREE


description:
ADHESIVE, BLACK MAX, 11 OZ/TUBE - LOCKTITE NO. 38050 OR EQUAL


description:
ADHESIVE, CONTACT, FOR GASKETS AND SEALS, PINT, FORD NO. D7A2-19B508A OR EQUAL


description:
BLOCK SEALANT, 16 OZ. TUBE, CONCENTRATED


description:
COOLING SYSTEM SEALER, 12 OZ. CAN - 12/CTN.


description:
COOLING SYSTEM SEALER, 16 OZ. CAN, LIQUID


description:
ELECTRIC, AUTO., 2-1/2 IN. X 10 FT. ROLL


description:
GASKET SEALER, NON-HARDENING, 11 OZ. TUBE


description:
GASKET SEALER, PERMATEX, FAST DRYING, 11 OZ. TUBE


description:
GASKET SEALER, PLIABLE, SLOW DRY, 11 OZ. TUBE


description:
HIGH STRENGTH, GEN. PURPOSE, THREADLOCKING, BONDING, AND SEALING OF CYLINDRICAL PARTS - 20 OZ./CAN


description:
IGNITION SEALER, 6 OZ. SPRAY CAN - 12/CTN.


description:
IGNITION SEALER, 13 OZ. SPRAY CAN - 12/CTN.


description:
IGNITION SEALER, 16 OZ. SPRAY CAN, ACRYLIC CLEAR - 12/CTN.


description:
IGNITION SEALER, KLEEN-FLO NO. 670 OR EQUAL


description:
RADIATOR STOP LEAK ADDITIVE,  12 OZ/JAR, BARS LEAK NO. C16 OR EQUAL


description:
SILICONE COMPOUND, 8 OZ., NAPA NO. 765-1346 OR EQUAL


description:
SILICONE SEALERS, MULTI-USE, 10 OZ. AEROSOL CAN


description:
SILICONE SEALER, MOIST. SEALANT, DI-ELECTRIC, F/ SPARK PLUGS, 5 OZ.


description:
TRANSMISSION SEALER AND COND., 15 OZ. CAN - 12/CTN.


description:
TRANSMISSION AND POWER STEERING SEALANT, 16 OZ./CAN


description:
10 OZ. AEROSOL CAN, NOT FOR ENGINE W/PRE-HEAT


description:
15 OZ. AEROSOL, MULTI-PURPOSE, WETSEAL OR EQUAL


description:
24 OZ. CYLINDER, ATTACHES F/AUTO. STARTING


description:
955 CC/CAN, F/HEAVY EQUIP., SCREWS ON F/AUTO. PRIMING


description:
WINDSHIELD WASHER ANTI-FREEZE AND DEICER


description:
Spring Tester (To Balance Valve Springs, etc.)


description:
Starting Equipment, Vehicle (Equipment Battery, Not Battery to Battery)


description:
Tachometer (With Wheel for Speed Recording)


description:
Testers: Engine Analysis, Headlight, Ignition, Timing, Compression, Oscilloscopes, Stroboscopes, etc.


description:
6 AND 12 VOLT, 3-1/2 IN. LONG STEEL PROBE, 4 FT. INSUL. WIRE LEAD, ALLIGATOR CLIP, ICE PICK TIP


description:
600 VOLT MAX. INPUT, FOR LF/HF RESPONSE, ADJ.


description:
1-7/8 IN. X 4-1/4 IN., AC/DC, 1.5 - 550 VOLT, CONTINUITY 0-100,000 OHMS, 3 FT. TEST LEAD


description:
PLASTIC, LOW VOLTAGE, AC/DC, FOR 6 AND 12 VOLT


description:
36 IN., 16 GA. LEADWIRE, ALLIGATOR CLIP, INDICATOR LIGHT, FOR 6, 12 AND 24 VOLT


description:
TRANSMISSION OIL CHECK KIT, INCLUDES BOTTLE TO MAIL SAMPLES TO LAB.


description:
5-1/4 IN. LONG, 1/4 IN. DIA., PEN TYPE W/INDICATOR LIGHT TO SHOW SPARK


description:
FOR RIM DIA. FROM 10 IN.-17.5 IN. & WIDTHS FROM 3-1/2 IN.-8-1/2 IN. 1 FT. PEDAL TO OPERATE BEAD BREAKERS THAT BREAK LOWER/UPPER BEADS SIMULTANEOUSLY, AUTO WHEEL POSITION, HEAVY DUTY LOCK MECHANISM.


description:
Tire Changing Tools and Accessories: Lug Wrenches, Tire Gauges, Tire Mounting Lubricant, Tire Pumps, etc.


description:
ADAPTER, AIR, 1/2 IN. DIA. ONE END, 3/4 IN. OTHER END, 1-7/8 IN. THRD. ON 2-1/2 IN. L FOR CHANGING TIRES


description:
ADAPTER, HOSE WHIP, 1/4 IN. N.P.T.  (CONVERTS 1/4 IN. NPT TO 3/8 IN.-24 THREAD)


description:
HOSE, 1/4 IN. I.D., BARBED COUPLER BODY, BRASS


description:
CHUCK, AIR, DUAL HEAD, 1/4 IN. FEMALE NPT  (SEALING TYPE-DO NOT USE WITH INFLATOR GAGE)


description:
CHUCK, AIR, MALE, 1/4 IN. I.D. HOSE , (SEALING TYPE-DO NOT USE WITH INFLATOR GAGE)


description:
CHUCK, AIR, 1/4 IN. I.D. MALE HOSE , SEALING TYPE, 4 BARBED STEM ON CHUCK, BRASS INSERT W/AIR VALVE IN HEAD


description:
CHUCK, AIR, FEMALE, 1/4 IN. NPT, W/SAFETY GRIP CHUCK CLIP,  (SEALING TYPE-DO NOT USE WITH INFLATOR GAGE)


description:
CHUCK, AIR, FEMALE, 1/4 IN. NPT , (SEALING TYPE-DO NOT USE WITH INFLATOR GAGE)


description:
CHUCK, DUAL HEAD, 3/8 IN. -24 HOSE WHIP,  (12 IN. HOSE, 5/8 IN. O.D.)


description:
CHUCK, SINGLE HEAD, 3/8 IN. - 24 HOSE WHIP,  36 IN. HOSE


description:
CLIP, AIR CHUCK, 1-1/4 IN., GALV., MALE THDS. W/FEMALE AIR FITTING


description:
COUPLER BODY, FEMALE, 1/4 IN. NPT , M STYLE


description:
COUPLER BODY, FEMALE, 1/4 IN. NPT , M STYLE, 1/4 IN. MALE NPT NIPPLE, COMPLETE


description:
COUPLER BODY, FEMALE THD, 1/4 IN. NPT, F/ARO DESIGN CPLR.


description:
COUPLER BODY, FEMALE, 1/4 IN. NPT , INLET, 48 SCFM MAX. AIR FLOW AT 100 P.S.I.1-11/16 IN. L, 1-1/8 IN. DIA., 3-1/3 OZ. WT.


description:
COUPLER BODY, MALE T, 1/4 IN. NPT  W/COLLAR GUARD


description:
END, HOSE, MALE, 1/4 IN. NPT,  1/4 IN. I.D. HOSE


description:
END, HOSE, MALE, 1/4 IN. NPT,  3/8 IN. ID HOSE


description:
END, HOSE, MALE, AIRLINE, 1/4 IN. NPT,  3/4 IN. O.D., 3/8 IN. I.D., RE-USABLE


description:
END, HOSE, MALE, 1/4 IN. NPT , 1/4 IN. I.D. HOSE, 5/8 IN. O.D. HOSE


description:
END, HOSE, MALE, 3/8 IN. NPT , 3/4 IN. O.D., 3/8 IN. I.D., AIR LINE


description:
HOSE, 1/4 IN. NPT, FEMALE WITH 1/4 IN. O.D. HOSE BARB


description:
HOSE FITTING, REUSABLE, 1/4 IN. MALE P.T. , (1/4 IN. I.D. X 9/16 IN. O.D.)


description:
HOSE FITTING, REUSABLE, 1/4 IN. MALE P.T. , (1/4 IN. I.D. X 5/8 IN. O.D.)


description:
HOSE, WHIP, 15 IN., TIRE GAUGE, 3/8 IN.-24 THREAD W/DUAL HEAD CHUCK


description:
HOSE, WHIP, 36 IN., 1/4 IN. NPT, CHUCK CLIP W/SINGLE HEAD CHUCK


description:
PLUG, COUPLER, BARBED, 1/4 IN. I.D. HOSE


description:
PLUG, COUPLER, MALE, H STYLE, 3/8 IN. NPT


description:
AIR GAUGE, 1/4 IN. MALE NPT, BOTTOM CONNECTION, INLET ON BACK, 2 IN. FACE DIAL INDICATOR


description:
DIAL PRESSURE GAUGE, 0-200 P.S.I.G. 1/8 IN. MALE NPT


description:
EQUALIZATION GAUGE, FOR DUAL TIRES, 55 P.S.I. MAX., W/AIR VALVE AND TWO (2) 16 IN. HOSES, EACH W/VALVE STEM ON ENDS


description:
EQUALIZATION GAUGE FOR DUAL TIRES, 60 P.S.I. MAX., W/AIR VALVE AND TWO 16 IN.  HOSES, EACH W/VALVE STEM CONNECTIONS ON ENDS


description:
EQUALIZATION GAUGE, FOR DUAL TIRES, 65 P.S.I MAX., W/AIR VALVE AND TWO 16 IN.  HOSES, EACH W/VALVE STEM CONNECTIONS ON ENDS


description:
EQUALIZATION GAUGE, FOR DUAL TIRES, 70 P.S.I. MAX., W/AIR VALVE AND TWO 16 IN. HOSES, EACH W/VALVE STEM CONNECTION ON ENDS


description:
EQUALIZATION GAUGE, FOR DUAL TIRES, 90 P.S.I. MAX., W/AIR VALVE AND TWO 16 IN. HOSE W/VALVE STEM CONN. ON ENDS


description:
EQUALIZATION GAUGE, FOR DUAL TIRES, 110 P.S.I. MAX., W/AIR VALVE AND TWO 16IN. HOSE W/VALVE STEM CONN. ON ENDS


description:
EQUALIZATION GAUGE, FOR DUAL TIRES, 12O P.S.I. MAX. W/AIR VALVE AND TWO 16 IN. HOSE W/VALVE STEM CONN. ON ENDS


description:
EQUALIZATION GAUGE FOR DUAL TIRES, 115 P.S.I. MAX., W/AIR VALVE AND TWO 16 IN.  HOSES, EACH W/VALVE STEM CONNECTIONS ON ENDS


description:
EQUALIZATION GAUGE FOR DUAL TIRES, 125 P.S.I. MAX., W/AIR VALVE AND TWO 16 IN.  HOSES, EACH W/VALVE STEM CONNECTIONS ON ENDS


description:
EQUALIZATION GAUGE FOR DUAL TIRES, 75 PSI MAX., W/AIR VALVE AND TWO 16 IN. HOSES, EACH W/VALVE STEM. CONN. ON ENDS


description:
EQUALIZATION GAUGE FOR DUAL TIRES, 80 P.S.I. MAX., W/AIR VALVE AND TWO 16 IN.  HOSES W/VALVE STEM CONNECTION ON ENDS


description:
EQUALIZATION GAUGE FOR DUAL TIRES, 85 P.S.I. MAX., W/AIR VALVE AND TWO 16 IN.  HOSES W/VALVE STEM CONNECTION ON ENDS


description:
EQUALIZATION GAUGE FOR DUAL TIRES, 100 PSI MAX, W/AIR VALVE AND TWO (2) 16 IN. HOSE, EACH WITH VALVE STEM CONN. ON ENDS


description:
EQUALIZATION GAUGE FOR DUAL TIRES, 95 PSI MAX. W/AIR VALVE AND TWO 16 IN. HOSES, EACH W/VALVE STEM CONNECTIONS ON ENDS


description:
INFLATOR GAUGE, W/12 IN. HOSE AND SINGLE FOOT CHUCK, GALV., CALIBRATED 10-120 P.S.I. IN 2 LB. INCREMENTS


description:
INFLATOR GAUGE, W/12 IN. HOSE AND DUAL HEAD CHUCK, 10-120 P.S.I., IN 2 LB. INCREMENTS, CALIBRATED


description:
INFLATOR GAUGE, W/24 IN. HOSE AND SAFETY GRIP CHUCK


description:
INFLATOR GAUGE, SINGLE HEAD CHUCK (USES 3/8 IN.-24 HOSE WHIP)


description:
INFLATOR GAUGE, SINGE HEAD CHUCK W/CLIP, 36 IN. HOSE, 10-120 LB. IN 2 LB. UNITS, DOUBLE SIDED INDICATOR BAR, BAYONET TYPE, LEVER ACTION


description:
INFLATOR GAUGE, DUAL FOOT, HEAVY DUTY, ANGLE HEAD, ALL METAL, CHROME INDICATOR, CALIBRATED 10 TO 150 P.S.I. IN 2 LB. INCREMENTS


description:
INFLATOR GAUGE, DUAL HEAD CHUCK (USES 3/8 IN.-24 HOSE WHIP)


description:
INFLATOR GAUGE, BAYONET, DUAL HEAD CHUCK (USES 1/4 IN. HOSE WHIP), W/HOSE


description:
INFLATOR GAUGE CARTRIDGE, CALIBRATED 10-120 P.S.I. IN 2 LB. INCREMENTS


description:
INFLATOR GAUGE CARTRIDGE, CALIBRATED 12-120 P.S.I. F/DELUXE INFLATOR GAUGE


description:
INFLATOR GAUGE VALVE CARTRIDGE, BRASS, 1-3/4 IN. L, IRREG. BELL SHAPE


description:
INFLATOR GAUGE KIT, DUAL TIRE, SIMULTANEOUS, W/ONE DUAL AIR GAUGE, 4 AIR EXT. HOSE, 4 RETAINER BRACKETS


description:
PENCIL GAUGE, CHROME PLATED, RECESSED DEFLATOR PIN, POCKET CLIP (0-50 LBS.)


description:
PENCIL GAUGE, PASSENGER CAR TIRE (10-50 LBS.)


description:
PENCIL SERVICE GAUGE, TRUCK TIRE, W/D.H. CHUCK (20-120 LBS.)


description:
PENCIL GAUGE, TRACTOR TIRE (5-45 LBS.), CALIBRATED 4 SIDES, AIR/WATER


description:
PENCIL GAUGE, 2 SIDES, 20-120 P.S.I. IN 2 LB. INCREMENTS, NYLON INDICATOR BAR W/RED MARKER


description:
SERVICE GAUGE (REGULAR EXT., 10-120 LBS.)


description:
SERVICE GAUGE, FOR LARGE BORE VALVE STEMS, 10-150 LB.


description:
TREAD DEPTH GAUGE, CALIBRATED 0 TO 1 IN.


description:
CLIP, SAFETY GRIP CHUCK, SNAP-ON, F/SINGLE HEAD, PLATED, LEVER TYPE


description:
HOSE, EQUALIZATION GAUGE, 17-1/4 IN. L X 3/8 IN. O.D., STAINLESS STEEL BRAID, 1 MIL O-RING TO FEMALE SHRADE VALVE, W/DUAL O-RING FITTING OTHER END


description:
HOSE, EQUALIZATION GAUGE, 17-1/4 IN. L X 3/8 IN. O.D., STAINLESS STEEL BRAID, 1 MIL O-RING TO 180 DEG. SWIVEL FEMALE SHRADE VALVE, W/DUAL O-RING FITTING OTHER END


description:
ENGINE OPERATED, SPARK PLUG TIRE KIT, 14/18MM ADAPTER, 16 FT. H.D. RUBBER HOSE W/VALVE FTG., 100 P.S.I. PRESS. GAUGE, DBL. VALVE PUMP ELEMENT


description:
TANK, AIR, PORTABLE, 12 GAL. CAP., FOR TIRE INFLATION, PER MIL SPEC. MIL-C-4109E


description:
PUMPS, TIRE SEALANT, GEN. PURPOSE, FOR TRANSFERRING SEALANT


description:
2 IN. DIA. X 22 IN. H, W/4-5 FT. CLEAR HOSE, W/12 IN. DIA. COVER, 3 MT. SCREWS, 6 IN. TEE HANDLE, SPENCER MODEL NO. 240 OR EQUAL


description:
TANKS, AIR, PORTABLE (FOR TIRE INFLATION)


description:
6 GAL. CAPACITY, PER MIL SPEC. MIL-C-4109E, NAPA NO. 8211171 OR EQUAL


description:
9 GAL. CAPACITY, 6 FT. AIR HOSE W/TIRE CHUCK, 160 P.S.I. MIN. PRESSURE GAUGE, WORKING PRESSURE 125 P.S.I.


description:
BEAD EXPANDER, 2-1/4 IN. DIA. W/SAFETY RELEASE VALVE


description:
BREAKER, BEAD, HEAVY DUTY IMPACT, W/FLOATING FOOT AND 51 IN. L DRAW BAR


description:
DRIVING IRON TO LOOSEN RUSTED BEADS, 36 IN.


description:
DRIVING IRON, 11-3/4 IN. LONG, 1-1/2 IN. DIA., FOR BREAKING 3 IN. AND 6 IN. FLAT BEADS


description:
HAMMER, FIBERGLASS, 16 IN. W/WOOD LIKE HANDLE


description:
HAMMER, FIBERGLASS, 18 IN., FIBERGLASS HANDLE, VINYL GRIP, 6 LB.


description:
HAMMER, FIBERGLASS, 27 IN. W/WOOD LIKE HANDLE


description:
HAMMER, FIBERGLASS, 30 IN. W/WOOD LIKE HANDLE


description:
HAMMER, WOOD, 17 IN. L, 5-1/2 LB., WOOD HANDLE


description:
HANDLE, HAMMER, WOOD, 17 IN. L, GROOVES IN HANDLE F/HAND GRIP


description:
HANDLE, HAMMER, WOOD, 30 IN. L, GROOVES IN HANDLE F/HAND GRIP


description:
HEAD, MALLET, RUBBER, 2-3/4 IN. L, 3/4 IN. DIA. HOLE, 1 IN. DEEP, F/MTG. 2-1/2 IN. - 2-3/4 IN. ROUND TAPPER


description:
LOCK RING TOOL, 5/8 IN., X 19 IN. L, 2 IN. END, STRAIGHT


description:
LOCK RING TOOL, 11/16 IN. X 24 IN., 2-1/4 LB.


description:
SPOON, CURVED, 11/16 IN. X 30 IN., 3 LB.


description:
SPOON, STRAIGHT, 7/8 IN. X 30 IN., 4-3/4 LB.


description:
SPREADER, TIRE, MANUAL, CAMEL NO. 17-260


description:
WRENCH, RATCHET, SPARE TIRE RACK, 14-1/2 IN. L X 1 IN. W/HANDLE 2-1/8 IN. @ RATCHET END W/ 1-1/8 IN. HEX FTG.


description:
4 WAY, 3/4 IN. X 13/16 IN. X 7/8 IN., W/SCREW DRIVER END, 20 IN. LONG


description:
4 WAY, ALLOY STEEL, HEX OPENINGS, 18 IN. LONG, SIZE 3/4 IN. X 13/16 IN. 15/16 IN. X 7/8 IN. (FOR PASSENGER CARS)


description:
4 WAY, ALLOY STEEL, HEX OPENINGS, 21-1/2 IN. LONG, SIZE 3/4 IN. X 13/16 IN.15/16 IN. X 7/8 IN. (FOR PASSENGER CARS)


description:
4 WAY, ALLOY STEEL, 25 IN. LONG, SIZE 15/16 IN., 7/8 IN., 1-1/16 IN., 1 IN.(FOR LIGHT TRUCKS)


description:
4 WAY, ALLOY STEEL, W/CENTER HOLE FOR LEVERAGE BAR, 27-1/2 IN. LONG, SIZE 1-1/16 IN., 1-1/4 IN., 1-1/2 IN., 13/16 IN. (FOR H. D. TRUCK, BUS, TRACTOR)


description:
DOUBLE END, SOCKET SIZE 15/16 IN. SQUARE, 1-3/4 IN. HEX


description:
DOUBLE END, SOCKET SIZE 1 IN., 1-1/4 IN., 5/8 IN. SQUARE, HEX HANDLE OPENING 3/4 IN., 16 IN. LONG


description:
DOUBLE END, SOCKET SIZE 1-1/8 IN., 1-5/16 IN., 15-1/4 IN.


description:
DOUBLE END, SOCKET SIZE 1-1/4 IN., 1-1/16 IN., 15-1/2 IN. L


description:
DOUBLE END, SOCKET SIZE 1-1/2 IN., 13/16 IN. SQUARE, 16-1/2 IN. LONG, 3/4 IN. HEX HOLE EACH END FOR HANDLE


description:
HANDLE, LUG WRENCH, 3/4 IN. HEX SHAFT X 22 IN. LONG, STEEL


description:
300 FT. COMPLETE W/REEL, LUFKIN NO. OC9300B W/31-300 REEL OR EQUAL


description:
Training Aids and Instructional Equip. and Supplies, Automotive


description:
5-3/4 IN. H X 8 IN. W (BOTTOM) X 2 IN. W (TOP) X 10 IN. L, TRIANGLE, HEAVY RUBBER


description:
6 IN. H X 8 IN. W X 10 IN. L, RUBBER, W/HOOK


description:
BADGES, EMBLEMS, NAME TAGS AND PLATES, JEWELRY, ETC.


description:
Badges, Buttons, Emblems, and ID Cards, Celluloid and Plastic: Student, Faculty, Membership, Employee, etc.


description:
BADGES, NAME, PREPRINTED, PLASTIC, PIN-ON TYPE


description:
3/4 IN. X 3 IN., AIR FORCE BLUE W/WHITE LETTERS, LETTERING TYPE 1 BLOCK SIZE 1/4 IN., "PARK ATTENDANT"


description:
1 IN. X 3 IN., BLUE W/WHITE LETTERS, "REST AREA ATTENDANT"


description:
BADGE KIT, PIN HOLDER STYLE, 2-1/6 IN. X 3-1/2 IN., BLUE BORDER, INCLS. 50 HOLDERS AND 64 BADGES/LABELS, INK JET COMPATIBLE, AVERY NO. 5883 OR EQUAL


description:
3 IN. X 2 IN., PIN ON, W/BLANK CARD INSIDE, 100/BOX


description:
3-7/8 IN. X 2-5/8 IN., HORIZONTAL TOP SLOT, WITH BULLDOG CLIP, INTERSCOL INC. NO. 1321 OR EQUAL, 250/BOX


description:
CARDS, IDENTIFICATION (I.D.), PRINTER OR STRAIGHT CUT (REGULAR), INSTANT COLOR PHOTO


description:
TWO (2) CARDS PER SET, ONE (1) LAMINATED FOR CLIENT, SECOND UNLAMINATED DUPLICATE FOR RECORD (IN QUANTITIES OF 0 - 100,000 SETS)


description:
TWO (2) CARDS PER SET, ONE (1) LAMINATED FOR CLIENT, SECOND UNLAMINATED DUPLICATE FOR RECORD (IN QUANTITIES OF 100,001 - 125,000 SETS)


description:
TWO (2) CARDS PER SET, ONE (1) LAMINATED FOR CLIENT, SECOND UNLAMINATED DUPLICATE FOR RECORD (IN QUANTITIES OF 125,001 - 150,000 SETS)


description:
TWO (2) CARDS PER SET, ONE (1) LAMINATED FOR CLIENT, SECOND UNLAMINATED DUPLICATE FOR RECORD (IN QUANTITIES OF 150,001 - 200,000 SETS)


description:
TWO (2) CARDS PER SET, ONE (1) LAMINATED FOR CLIENT, SECOND UNLAMINATED DUPLICATE FOR RECORD (IN QUANTITIES OF 200,001 - 300,000 SETS)


description:
TWO (2) CARDS PER SET, ONE (1) LAMINATED FOR CLIENT, SECOND UNLAMINATED DUPLICATE FOR RECORD (IN QUANTITIES OF 300,001 - 400,000 SETS)


description:
TWO (2) CARDS PER SET, ONE (1) LAMINATED FOR CLIENT, SECOND UNLAMINATED DUPLICATE FOR RECORD (IN QUANTITIES OF 400,001 - 500,000 SETS)


description:
CARDS, IDENTIFICATION (I.D.), PIN FED, INSTANT COLOR PHOTO


description:
IDENTIFICATION BADGE SUPPLIES AND MATERIALS


description:
CHAIN, BEAD, NECK, 30 IN., SILVER W/CLASP


description:
CHAIN, BEAD, NECK, 36 IN., SILVER W/CLASP


description:
STRAP, BADGE CLIP, MYLAR, 1/2 IN. W X 2-1/2 IN. L, W/SNAP CLOSURE


description:
Badges and Emblems, Metal: Cap, Game Wardens', Officers', Service Awards, Uniform, etc.


description:
HEAD OR CHIEF, 4 IN. X 2-1/2 IN., BLACKINTON NO. 3883C OR EQUAL


description:
STANDARD, 4 IN. X 2-1/2 IN., BLACKINTON NO. A2687L OR EQUAL


description:
BAR, COLLAR, LIEUTENANT, GOLD, W/CLUTCH BACK, 3/4 IN. X 1/4 IN.


description:
BAR, COLLAR, LIEUTENANT, SILVER, W/CLUTCH BACK, 3/4 IN. X 1/4 IN.


description:
BAR, SHOULDER, LIEUTENANT, GOLD, PIN BACK, 1 IN. X 3/8 IN.


description:
BAR, SHOULDER, LIEUTENANT, SILVER, PIN BACK, 1 IN. X 3/8 IN.


description:
INSIGNIA, LIEUTENANT, METAL, BLACK, W/CLUTCH BACK, 1 IN. X 3/8 IN.


description:
INSIGNIA, SERGEANT, METAL, BLACK, W/CLUTCH BACK, 1 IN. X 3/4 IN.


description:
ORNAMENT, COLLAR, CHAPLAIN CROSS, GOLD, 5/8 IN. X 1/2 IN.


description:
ORNAMENT, COLLAR, STATE OF MICHIGAN SEAL, GOLD


description:
ORNAMENT, COLLAR, STATE OF MICHIGAN SEAL, SILVER


description:
ORNAMENT, SHOULDER, CHAPLAIN CROSS, GOLD, 1 IN. X 5/8 IN.


description:
Card Holders, All Types (See Class 578 for Metal)


description:
3-1/2 IN. X 2-1/2 IN., POCKET PROTECTOR STYLE


description:
Convention Badges and Name Tags, Adhesive Back


description:
BADGES, 2-3/16 IN. X 3-3/8 IN., PLAIN WHITE - 100/BOX


description:
HELLO, BLUE, STICK ON, 2-5/16 IN. X 3-3/8 IN.


description:
HELLO, RED, STICK ON, 2-5/16 IN. X 3-3/8 IN.


description:
HELLO-MY NAME IS, BLUE, 2-3/16 IN. X 3-3/8 IN. - 100/BOX


description:
HELLO-MY NAME IS, GREEN BORDER, 2-3/16 IN. X 3-3/8 IN. - 100/BOX


description:
HELLO-MY NAME IS, RED, 2-3/16 IN. X 3-3/8 IN. - 100/BOX


description:
Convention Badges and Name Tags, Nonadhesive type


description:
2 IN. X 3 IN., CLEAR, WHITE INSERTS, RUST PROOF SOLID BRASS PINS (PIN STYLE), 100/BOX


description:
2-1/4 IN. X 3-3/8 IN., PACKED IN REUSABLE PLASTIC BOXES - 100/BOX


description:
2-7/16 IN. 3-1/2 IN., SELF-ADHESIVE, BLUE BORDER, FAN FOLDED, PIN FEED - 250/BOX


description:
Fasteners (For Badges, etc.): Metal, Plastic, etc.


description:
RETRACTABLE, SYNTHETIC LINE APX. 36 IN. L, SPRING-LOADED ROUND BLUE CASE W/STEEL CLIP ON BACK


description:
1/2 IN. X 2-3/4 IN., 1 POSITION, W/STAINLESS STEEL CLIP


description:
BAR, TIE, CLIP ON, SILVER, 1/4 IN. W X 2-1/4 L


description:
Nameplates, Specialty (Including Clocks, Logos, Pen/Pencil Sets, etc.)


description:
Recycled Awards, Convention Items, Trophies, etc.


description:
Tags, Metal, Adhesive Back: Inventory, Property, Tool, etc.


description:
Tags, Metal, Nonadhesive: Inventory, Property, Skiff, Seine Trawl, etc.


description:
BRASS, 1 IN. X 3 IN. W/MOUNTING HOLE, FOR LPG CONVERTED VEHICLES


description:
PAPER W/ METAL RIM, 1 IN., STRING TIE, WHITE, 100/BDL.


description:
PLASTIC, W/TIE, 3 IN. X 5 IN., "DO NOT OPERATE"


description:
VINYL, 3-1/4 IN. X 5-1/2 IN., "DANGER OUT OF SERVICE"


description:
VINYL, 3-1/2 IN. X 6 IN., "DO NOT OPERATE"


description:
7 IN. X 4 IN., 1/2 IN. LETTERS, SILVER W/BLACK LETTERS, REGISTRATION FOR BILLBOARD


description:
Trophies, Plaques, Awards, etc. (Not Otherwise Classified)


description:
BAGS, BAGGING, TIES, AND EROSION CONTROL EQUIPMENT


description:
12 IN. X 6 IN., BASHLIN NO. 24M OR EQUAL


description:
20 IN. WIDE X 13 IN. LONG X 3 IN. DEEP, W/32 IN. X 3 IN. HANDLE


description:
17 IN. X 27-1/2 IN., 10 OZ. PER YARD, W/HEMMED OPENING, FOR USE AS A GRAVELSAMPLE BAG


description:
12 IN. X 24 IN., 1.25 ML THICK AUTOCLAVE BIO-HAZARD, HEAVY-DUTY POLYETHYLENE, CLEAR W/ RED ORANGE PRINTING


description:
38 IN. X 65 IN., POLYETHELENE, WORDED "HAZAROUS MATERIAL HANDLE WITH CARE", WITH TAGS AND TIES, 24/CASE


description:
6-1/2 IN. X 52 IN., MARKETING DISPLAYS INC. NO. SA-03942 OR EQUAL


description:
6-1/2 IN. X 52 IN., MARKETING DISPLAYS INC. NO. SA-04504 OR EQUAL


description:
20 IN. X 11 IN. X 10 IN., CLUB BAG, NYLON AND POLYPROPYLENE WEBBING, ASSORTED DARK COLORS


description:
36 IN. X 38 IN., PERSONAL USE, MESH, WHITE


description:
BAGS, SILAGE, TRI-EXTRUDED, INDIVIDUALLY BOXED W/PLASTIC TIES AND REPAIR TAPE, TO HAVE ULTRAVIOLET PROTECTION BUILT IN


description:
Soil Erosion Sheeting Material (To Include Silt Fencing): Asphalt, Biodegradable Paper, Burlap, Excelsior, Jute, Straw, etc.


description:
FOR APPROXIMATELY 3:1 SLOPES, TOP NETTING TO DEGRADE WITHIN 45 DAYS, NORTH AMERICAN GREEN NO. DS150 OR EQUAL


description:
FOR APPROXIMATELY 3:1 SLOPES, TOP NETTING TO DEGRADE WITHIN ONE YEAR, NORTH AMERICAN GREEN NO. S150 OR EQUAL


description:
FOR GREATER THAN 3:1 SLOPES, NORTH AMERICAN GREEN NO. SC150


description:
FOR 4:1 SLOPES OR LESS, TOP NETTING TO DEGRADE WITHIN 45 DAYS, NORTH AMERICAN GREEN NO. DS75 OR EQUAL


description:
FOR 4:1 SLOPES OR LESS, TOP NETTING TO DEGRADE WITHIN ONE YEAR, NORTH AMERICAN GREEN NO. S75 OR EQUAL


description:
NON-DEGRADABLE, TOP AND BOTTOM NETTING TO BE UV STABILIZED, NORTH AMERICAN GREEN NO. P300 OR EQUAL


description:
STRAW, 4 FT. X 135 FT., PHOTO-DEGRADABLE NET, NORTH AMERICAN GREEN NO. S75


description:
CLOTH, FILTER, 25 IN., BARRIER, EXTRA STRENGTH


description:
EROSION CONTROL, 48 IN. X 450 FT., 1/16 IN. THICK, FILTER, BLACK


description:
NON-WOVEN FILTER FABRIC, FOR INSTALLATION AROUND SUBSURFACE TILES, TO BE POLYFELT TS500 OR EQUAL


description:
NON-WOVEN FILTER FABRIC, FOR INSTALLATION UNDER RIP RAP, TO BE POLYFELT TS1000 OR EQUAL


description:
FIBER, POLYPROPYLENE, DISCRETE FIBRILLATED, SOIL STABILIZING MATERIAL


description:
20 LB/BOX, SYNTHETIC IND. FIBERGRIDS OR EQUAL


description:
FENCE, 36 IN. W X 100 FT. L, NYLON, FILTER SCREEN


description:
FENCE, 36 IN. W X 150 FT. L, 100% POLYPROPYLENE, WITH POCKETS ON 8 FT. CENTERS, AMERICAN EXCELSIOR NO. SB36 OR EQUAL


description:
FENCE, 36 IN. W X 300 FT. L, 100% POLYPROPYLENE, FILTER SCREEN


description:
4 METERS WIDE X 50 METERS LONG, 1-1/2 IN. X 1 IN. GRID


description:
30 IN. W X 400 FT., 100% POLYETHYLENE, TEREPHTHALATE


description:
39 IN. X 330 FT., NYLON MONOFILIMENT MATERIAL


description:
48 IN. X 100 FT., ASPEN WOOD, CURLEX BLANKET, W/PLASTIC NETTING, PHOTODEGRADABLE, 72 LBS/ROLL, 400 SQFT.


description:
48 IN. X 100 FT., PLASTIC MESH COVER 3 IN. THICK


description:
51 IN. X 432 FT., POLYJUTE FABRIC,  100 LBS/ROLL


description:
90 IN. X 120 FT. L X 3/8 IN. THICK (100 SQYDS), ONE SIDE COVERED W/EXTRUDED DEGRADABLE POLY NETTING, 5/8 IN. X 3/4 IN. OPENINGS, MADE OF STRAW MATERIAL


description:
96 IN. X 90 FT. ROLL (80 SQ.YDS.), NYLON MESH


description:
POLYJUTE, SYNTHETIC INDUSTRIES NO. 407GT OR EQUAL


description:
16 IN. L, 50 LB. STRENGTH, NATURAL COLOR, 1 IN. TO 1-1/4 IN. MAX. DIA. BUNDLE, 100/PACKAGE


description:
BARBER AND BEAUTY SHOP EQUIPMENT AND SUPPLIES


description:
Barber Shop Sterilizers, and Sterilizing Jars


description:
18 IN. X 9 IN. X 7 IN. SANITIZER, ELECTRIC, WITH 15 WATT ULTRAVIOLET TUBE


description:
20 IN. X 10 IN. X 11 IN. SANITIZER, ELECTRIC, 2 ULTRAVIOLET TUBES TIMER


description:
25 OZ. JAR CAPACITY. HEAVY DUTY GLASS. ALL METAL PARTS STAINLESS STEEL. OVERALL HEIGHT 10 IN. NO. 3.


description:
Barber Shop Sundries: Clipper Lubricants, Disinfectants, Dispensing Bottles, Mugs, Neck Dusters, Trays, etc.


description:
SQUEEZE TYPE, SPOUT TOP, GRADUATED IN OZ., 4 OZ. CAPACITY


description:
SQUEEZE TYPE, SPOUT TOP, WIDE MOUTH, GRADUATED IN OUNCES, 8 OZ. CAPACITY


description:
NECK DUSTER WITH NYLON BRISTLES. WOOD HANDLE


description:
OIL, 4 OZ. CAN, FOR ELECTRIC CLIPPER BLADES


description:
6 COMPARTMENT, VACUUM FORMED POLYSTYRENE SIZE 15-1/2 IN. X 19-1/2 IN. X 3-1/2 IN. WHITE


description:
SINGLE FACED, WITH 7 IN. REPLACEABLE GLASS, HOLE IN HANDLE FOR HANGING


description:
BASIC CASE, APPROX. 14 IN. X 10 IN. X 5 IN., ONE LOCK, BLUE


description:
CAPE, PLASTIC, SHAMPOO, NYLON TIE STRINGS, REINFORCED COLLAR, ASSORTED SOLID COLORS


description:
CAPE, SHAMPOO, VINYL, WITH VELCRO NECK GRIP


description:
CLOTH, HAIR STYLING, NYLON WITH ADJUSTABLE SNAP COLLAR, BLACK OR BROWN


description:
HOLDER, HAIR CLOTH, CERTIFIED, KING SIZE, 2-3/4 IN. LONG, ONE PIECE SPRING STEEL, CHROME-PLATED


description:
CLIPPERS, HAIR, INCLUDING PARTS & ACCESSORIES (BRANDS LISTED OR EQUAL)


description:
ATTACHMENT, GI DELUXE SPEED-O-GUIDE, SIZE 00, 1/6 IN. LENGTH, SELF-ADJUSTING SPRING FIT SNAPS INTO POSITION ON CLIPPER, FITS ALL ELECTRIC CLIPPERS, FOR FLAT TOP, CREW CUTS, OR TAPERING CUTS.


description:
ATTACHMENT, GI DELUXE SPEED-O-GUIDE, SIZE 1A, 9/16 IN. LENGTH, SELF-ADJUSTING SPRING FIT SNAPS INTO POSITION ON CLIPPER, FITS ALL ELECTRIC CLIPPERS, FOR FLAT TOP, CREW CUTS, OR TAPERING CUTS.


description:
BLADE FOR OSTER HAIR CLIPPERS, BLADE SIZE 0000


description:
BLADE FOR OSTER HAIR CLIPPERS, BLADE SIZE 000


description:
BLADE FOR OSTER HAIR CLIPPERS, BLADE SIZE 1


description:
BLADE FOR OSTER HAIR CLIPPERS, BLADE SIZE 1A


description:
BLADE, FOR OSTER HAIR CLIPPER, MODEL 10, BLADE SIZE 1-1/2 IN., BLADE NO. 50


description:
BLADE, FOR OSTER HAIR CLIPPER, MODEL 10, BLADE SIZE 2, BLADE NO. 50


description:
BLADE, FOR OSTER HAIR CLIPPER, MODEL 10, BLADE SIZE 0A, BLADE NO. 50


description:
BLADE, FOR OSTER HAIR CLIPPERS, MODEL 76, BLADE SIZE 1-1/2


description:
BLADE, FOR OSTER HAIR CLIPPERS, MODEL 76, BLADE SIZE 2


description:
BLADE FOR OSTER HAIR CLIPPERS, BLADE SIZE 3-1/2


description:
BLADE PROTECTOR, SNAP-ON, PLASTIC, FOR ELECTRIC CLIPPERS - 12 PKG/CS


description:
CARBON BRUSH, W/BRUSH SPRING ASSEMBLY, FOR OSTER NO. 10 CLIPPER


description:
CLIPPER, ADJUSTABLE, WITH ADJUSTO-LOCK BLADES AND HEAVY DUTY ARM AND COIL; TAPERS FROM 000 TO 1, FLEXIBLE CORD, ALUMINUM CASE WITH NYLON LID, AC ONLY, 110 VOLTS, 60 CYCLES


description:
CLIPPER, ELECTRIC, SUPER (89) TAPER, FULLY ADJUSTABLE FROM 000 TO1


description:
CLIPPERS, ELECTRIC, UNBREAKABLE ALUMINIUM HOUSING, THUMB CONTROL SWITCH, ADJUSTABLE BLADE SIZES


description:
CLIPPERS, ELECTRIC, UNBREAKABLE PLASTIC HOUSING, THUMB CONTROL SWITCH, INTERCHANGEABLE BLADES, OSTER NO. 76 OR EQUAL


description:
CLIPPER, FOR ALL CUTS, ADJUSTABLE BLADE FOR CUTS 000-1


description:
CLIPPER, OSTER NO. 10, SINGLE-WOUND ARMATURE AND 7 BAR COMMUTATOR, TWO DETACHABLE NO. 50 BLADES, NO. 000 AND NO. 1 INCLUDED


description:
CLIPPER, MASTER, MODEL M, HAND-FITTED, LIFETIME ALUMINUM CASE


description:
CLIPPER, SMALL TAPER, ADJUSTABLE, LENGTH OF CUT FROM 000 TO 1


description:
CLIPPER, T-EDGER, TRIMMING AROUND THE EARS


description:
OIL, FOR WAHL CLIPPER BLADES, 4 OZ./CAN, 3 DOZ/CTN


description:
OUTLINER, ELECTROTOOL OUTLINER II W/(T) BLADES, FOR STYLING, OUTLINING, AND SHAPING, WITH 8 FT CORD


description:
1250 WATT MIN., THERMOSTATICALLY CONTROLLED, NOZZLE ATTACHMENT, 2 SPEEDS, 4 HEAT SETTINGS


description:
1500 WATT MIN., MINI, 2 SPEEDS, 3 HEAT SETTINGS


description:
1500 WATT MIN., THERMOSTATICALLY CONTROLLED, 2 SPEED, 4 HEAT SETTINGS, TOGGLE SWITCH, NOZZLE ATTACHMENT, HEAVY DUTY CORD W/TRAIN RELIEF AND HANGING LOOP


description:
1600 WATT MIN., 2 SPEED, 4 HEAT SETTINGS, THERMOSTATICALLY CONTROLLED, HEAVY DUTY MOTOR AND FAN


description:
HEATS 2 LARGE PRESSING COMBS AND 1 IRON AT SAME TIME, INSULATED, METAL PARTS OF ALUMINUM, ON-OFF SWITCH


description:
1/2 IN., 120V, 50/60 HZ, SAFETY TIP, NON-STICK CHROME PLATED BARREL, TWO-HEAT SETTINGS, THREE POSITION SWITCH W/INDICATOR LIGHT, STAINLESS STEEL CLAMP


description:
1/2 IN. DIAMETER, FOR HUMAN HAIR, THERMOSTATIC HEAT CONTROL, SPRING HAIR HOLD, ON-OFF SWITCH WITH LIGHT, NO TWIST SWIVEL CORD, PLASTIC SAFETY TIP, BUILT IN STAND, CHROME FINISH


description:
3/4 IN., 120V, 50/60 HZ, SAFETY TIP, NON-STICK CHROME PLATED BARREL, TWO-HEAT SETTINGS, THREE POSITION SWITCH W/INDICATOR LIGHT, STAINLESS STEEL CLAMP


description:
5/8 IN., 120V, 50/60 HZ, SAFETY TIP, NON-STICK CHROME PLATED BARREL, TWO-HEAT SETTINGS, THREE POSITION SWITCH W/INDICATOR LIGHT, STAINLESS STEEL CLAMP


description:
3/4 IN. DIAMETER, FOR HUMAN HAIR, THERMOSTATIC HEAT CONTROL, SPRING HAIR HOLD, ON-OFF SWITCH WITH LIGHT, NO TWIST SWIVEL CORD, PLASTIC SAFETY TIP, BUILT IN STAND, CHROME FINISH


description:
CURLING IRON, LOOSE-JOINT, DOUBLE FORGED STEEL, BLUE STEEL FINISH, NON-SHRINK REVOLVING HANDLES


description:
CURLING IRON, HAND HELD SPRING TYPE, TEFLON COATED, THERMOSTAT CONTROL, ON-OFF SWITCH, SWIVEL CORD, LIGHT INDICATES WHEN HOT, AVAILABLE IN 3/4 IN. OR 1/2 IN. DIAMETER


description:
LATHER SERVICE MACHINE, TO PRODUCE LATHER AT RIGHT CONSISTENCY AND TEMPERATURE, NO MOTOR BRUSHES, CORROSION RESISTANT MATERIALS, LATHER SPOUT SEALED AGAINST FOREIGN MATTER, 110-120 AC OR DC, ALL CYCLES


description:
5 IN., HAIR CUTTING, WITH CURVED BLADES, CHROMED LIGHT WEIGHT


description:
5 IN., STYLING, ICE TEMPERED, FINGER REST


description:
5 IN., STYLING, STRAIGHT, STAINLESS STEEL, ONE BLADE CORRUGATED, ONE PLAIN GRID, NO FINGER BRACE


description:
5-1/2 IN., STAINLESS STEEL, WITH INVERTED HANDLES


description:
6-1/2 IN. LONG, ICE-TEMPERED, STAINLESS STEEL, KEEN CUTTING EDGE


description:
7 - 7-1/2 IN. NICKEL PLATED, GROUND SET, HARDENED AND TEMPERED STEEL BLADES


description:
SHEARS, HAMMERED HANDLES AND A SILENCER BETWEEN THE FINGER HOLES


description:
BLADE, REPLACEMENT, STAINLESS STEEL, FOR BURMAX NO. DO44


description:
SHEARS, HOLLOW GROUND AND REPLACABLE CORRUGATED BLADES


description:
SHEARS, THINNING, LIGHTWEIGHT, BEAUTICIAN'S SOLENGIN STEEL, CHROME PLATED


description:
TAPER AND THINNING, 46 EXTRA-FINE TEETH, DETACHABLE BLADE


description:
3 IN., FINE POINT END, NICKEL POLISHED FINISH


description:
3 IN., HIGHLY NICKEL POLISHED, SLANT END


description:
4-1/8 IN., VERY FINE POINT, STAINLESS STEEL


description:
6 1/2 IN., INSPECTION OR PARTS HOLDING, GENERAL TOOL NO. 412 OR EQUAL


description:
5 IN., CURVED JAW, STAINLESS STEEL, CLAMP TYPE HEAT SINK FOR SOLDERING DIODES


description:
5 IN., STRAIGHT JAW, STAINLESS STEEL, CLAMP TYPE HEAT SINK FOR SOLDERING DIODES


description:
COMBINATION MADE OF IMPORTED SHELL LEATHER, OXBLOOD COLOR, MEDIUM WEIGHT, COMBINED WITH MEDIUM WEAVE CANVAS IN NATURAL FINISH, SILKY DRAG, EXTRA SOFT AND PLIABLE, COMPLETE WITH NICKEL SNAP SWIVEL


description:
Boxes, Crates, Baskets, etc. (For Fresh Fruits and Vegetables)


description:
16 OZ., W/SCREW CAP,  NALGENE NO. 2199-006 OR EQUAL  -  48/CASE


description:
BOX, INTERMEDIATE, ASSEMBLED, 11 IN. D X 12 IN. W X 30 IN. H, WHITE PAPER


description:
BOX, INTERMEDIATE, ASSEMBLED, 11 IN. D X 12 IN. W X 30 IN. H, MIXED PAPER


description:
BOX LID FOR INTERMEDIATE SIZE BOX, OPEN CENTER, 8-1/2 IN. X 9-1/2 IN. OPENING, NO IMPRINT


description:
BOX LID FOR POLYFOAM BOX, OPEN CENTER, IMPRINTED


description:
TRAY, DESK TOP, 9-3/4 IN. D X 3-3/4 IN. W X 7-1/8 IN. H, MIXED PAPER


description:
TRAY, DESK TOP, 9-3/4 IN. D X 3-3/4 IN. W X 7-1/8 IN. H, WHITE PAPER


description:
CORRUGATED FIBERBOARD, 11 IN. X 12 IN. X 30 IN.


description:
CORRUGATED FIBERBOARD, 15-3/8 IN. X 12-3/8 IN. X 12 IN.


description:
20 IN. W X 15 IN. D X 13-1/2 IN. H, 12-1/2 GAL., IMPRINTED W/RECYCLE COMPUTER PAPER ONLY


description:
24 GAL. CAPACITY, REINFORCED CONCRETE OUTDOOR CONTAINER W/PUSH DOOR TOP AND LINER, WAUSAU NO. TF1015W19 OR EQUAL


description:
30 GAL. CAPACITY, STONE CONTAINER W/PLASTIC LINER, UPBEAT, INC. NO. E30C1 OR EQUAL


description:
45 GAL. CAPACITY, REINFORCED CONCRETE OUTDOOR CONTAINER W/PUSH DOOR TOP AND LINER, WAUSAU NO. TF1029W24 OR EQUAL


description:
14 QT. CAPACITY, 11-3/8 IN. X 8-1/4 IN. X 12-1/8 IN., BLUE, IMPRINTED WITH "WE RECYLCE" AND THE RECYCLE LOGO


description:
23 GAL. CAPACITY, 14-1/2 IN. X 14-1/2 IN. X 28 IN., BLUE, IMPRINTED WITH "WE RECYLCE" AND THE RECYCLE LOGO


description:
FOR USE WITH 55 GAL. CLOSED TOP DRUM,  BASCO NO. 904-9000 OR EQUAL


description:
FOR USE WITH 55 GAL. OPEN TOP DRUM,  BASCO NO. 904-9001 OR EQUAL


description:
SPIGOT, BRASS PLATED ZINC, DIE CAST, RIGID SHANK, FOR PLASTIC OR STEEL DRUMS


description:
FAUCET, 3/4 IN. OPENING, POLY, CORROSION PROOF


description:
30 GAL., 250 LB. MAX. WEIGHT CAP., DOT-21C,  GREIF BROS. NO. R-30 SF4Z OR EQUAL


description:
55 GAL., 400 LB. MAX. WEIGHT CAP., DOT-21C,  GREIF BROS. NO. F-55 SF5Z OR EQUAL


description:
Freight and Cargo Containers (Shipping) (See Class 640 For Boxes)


description:
Gaskets, All Types (For Barrels, Drums, Kegs, and Pails)


description:
ETHYLENE PROPYLENE, CLOSING RING GASKETS FOR 55 GAL. OPEN HEAD STEEL DRUMS, HALF ROUND, TUBULAR


description:
ETHYLENE PROPYLENE, CLOSING RING GASKETS FOR 55 GAL. OPEN HEAD OVERPACK SALVAGE DRUMS


description:
NEOPRENE, 1/16 IN. THICK X 36 IN. WIDE, BLACK, SMOOTH SURFACE


description:
NEOPRENE, 1/8 IN. THICK X 36 IN. WIDE, BLACK, SMOOTH SURFACE


description:
NEOPRENE, MULTISEAL, FOR USE WITH 55 GAL. DRUM,  BASCO NO. 55MS-NEO OR EQUAL


description:
BAGS, VINYL, FOR HAZARDOUS SPILL CONTROL


description:
30 IN. X 48 IN. X .6ML, CLEAR W/BLACK "ASBESTOS" WORDING, 50/CASE


description:
COVERS, POLYETHYLENE, FOR SPILL CONTAINMENT UNITS


description:
FOR 2 DRUM UNIT, 6 MIL,  CONTAINMENT CORP. NO. 2030 OR EQUAL


description:
FOR 4 DRUM UNIT, 6 MIL,  CONTAINMENT CORP. NO. 2030 OR EQUAL


description:
5 GAL., SQUARE, W/SCREW LID,  CARBOY NO. 931 OR EQUAL


description:
85 GAL., YELLOW, DOUBLE WALL, CAP LID WITH RING, DOT E-9775 COMPLIANCE, LABELED "SALVAGE DRUM", FOR 55 GAL. STEEL DRUM CONTAINMENT


description:
1800 GALLON, 13 FT. X 13 FT. X 17 IN., INFLATABLE SECONDARY CONTAINMETN, SINGLE LINED, FOR BERM INFLATOR, AERO TECH LABORATORIES NO. 125117 OR EQUAL


description:
CONTAINERS, METAL, FOR HAZARDOUS MATERIALS


description:
16 OZ., WITH ROUND STEEL WIRE BRUSH IN PLASTIC HANDLE/LID


description:
DRUMS, PLASTIC, SAFETY, FOR STORING HAZARDOUS MATERIALS


description:
55 GAL. (OVERSIZED), W/TWIST-ON LID, MARKED "STORAGE DRUM"


description:
DRUMS, STEEL, SAFETY, FOR STORING HAZARDOUS MATERIALS


description:
8 GAL., OPEN HEAD WITH 2 IN. PLUG, FOR DISPOSAL OF PCB LAB WASTE, LAB SAFETY   NO. C4395


description:
55 GAL. (OVERSIZED) W/SPECIAL LINER, MARKED "STORAGE DRUM - HOLDS 55 GAL." IN  YELLOW W/BLACK LETTERS


description:
DRUM PACK, STEEL, CONSISTING OF 88, 55, 30 AND 15-20 GAL. DRUMS, NESTED, FOR   SPILL CONTROL,  LAB SAFETY NO. US9121 OR EQUAL


description:
53 IN. X 49 IN. X 15 IN., POLYETHYLENE, HOLDS FOUR 55 GAL. DRUMS AND 85 GALS.  OF SPILL


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, ACID SOLUTION  - 25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, AMMONIA (ANHYDROUS) -  25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, ANTIFREEZE, RED/WHITE, W/PRECAUTIONS AND ANTIDOTES - 25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, COOLANT, SYNTHETIC - 25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE," DANGER " AT TOP OR LABEL RESERVING LOWER PORTION FOR WRITING - 25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, DANGER MISC. MESSAGE - 25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, DIESEL FUEL OIL -  25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, DIMETHYLFORMAMIDE -  25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, GASOLINE -  25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, ISOPROPYL ALCOHOL/ISOPROPANOL - 25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, KEROSENE - 25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, METHYLENE CHLORIDE - 25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, METHYL ISOBUTYL KETONE - 25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, MINERAL SPIRITS - 25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, NAPHTHA - 25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, NAPHTHA, V,M, & P - 25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, OIL - 25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, PAINT - 25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, PROPANE GAS, RED/WHITE, W/PRECAUTIONS AND ANTIDOTES - 25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, STODDARD SOLVENT - 25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, TOLUENE - 25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, TRICHLOROETHANE 1,1,1  - 25/PKG.


description:
3-1/2 IN. X 5 IN., PRESSURE SENSITIVE, XYLENE  - 25/PKG.


description:
4 IN. X 4 IN., PRESSURE SENSITIVE, DANGER - HAZARDOUS WASTE - 25/PKG.


description:
4 IN. X 4 IN., PRESSURE SENSITIVE, FLAMMABLE LIQUID  - 25/PKG.


description:
4 IN. X 4 IN., HIGH TACTILE ADHESIVE, "FLAMMABLE LIQUID", RED OVER WHITE BACKGROUND, 50/PKG


description:
4 IN. X 4 IN., EXTERIOR VINYL, "HARMFUL, STOWAWAY FROM FOODSTUFFS", LABELMASTER NO. SL24, 500/ROLL


description:
4 IN. X 4 IN., HIGH TACTILE ADHESIVE, "CORROSIVE", BLACK OVER WHITE BACKGROUND, 50/PKG


description:
4 IN. X 4 IN., HIGH TACTILE ADHESIVE, "OXIDIZER", BLACK OVER YELLOW BACKGROUND, 50/PKG


description:
4 IN. X 4 IN., HIGH TACTILE ADHESIVE, "POISON", BLACK OVER WHITE BACKGROUND, 50/PKG


description:
6 IN. X 6 IN., "DANGER - HAZARDOUS WASTE" - 25/PKG.


description:
PAILS, STEEL, CLOSED HEAD W/PULL UP SPOUT AND SCREW CAP


description:
PAILS, STEEL, TAPERED NESTING LUG COVER, TRAY PACK, RUST INHIBITOR INTERIOR LINING


description:
5 GAL. CAP., 28/26 GAUGE, BLACK, TEXBERRY NO. 64016 OR EQUAL


description:
57 GAL., 750 LB. CAP., CLOSED TOP,  BASCO ACT I OR EQUAL


description:
Plugging Compounds, Chemically Resistant, Pre-Mixed or Dry (Temporarily Stops Leaks in Drums, Tanks, and Other Containers)


description:
KIT, PATCH & PLUG, FOR 55 GAL. DRUMS UP TO AND INCLUDING TANKER TRUCKS, INCLUDING: NON-SPARKING TOOLS; PLUGS; PUTTY; AND WEDGE KIT, EDWARDS AND CROMWELL SERIES AE OR EQUAL


description:
3/4 IN., W/POLY. GASKET, FOR 55 GAL. DRUM


description:
3/4 IN., W/NEOPRENE GASKET, FOR 55 GALLON TIGHT HEAD STEEL DRUMS


description:
2 IN., W/NEOPRENE GASKET, FOR 55 GALLON TIGHT HEAD STEEL DRUMS


description:
Repair Supplies and Equipment for all Types of Containers


description:
FOR 55 GALLON DRUM PLUG, BASCO NO. 975M OR EQUAL


description:
55 GAL., UNLINED, 18/18 GAUGE, CLOSED HEAD,  BASCO NO. 17E OR EQUAL


description:
55 GAL., UNLINED, 18/16 GAUGE, OPEN HEAD, W/BOLT RING CLOSURE, MEETS DOT 17-H, BASCO NO. 5670 OR EQUAL


description:
55 GALLON CLOSED HEAD STEEL DRUM, 20 GAUGE


description:
55 GALLON CLOSED HEAD STEEL DRUM, WITH 2 IN. PLUG


description:
55 GALLON OPEN HEAD STEEL DRUM, 18/16 GAUGE, DOT-17H


description:
55 GALLON OPEN HEAD OVERPACK SALVAGE STEEL DRUMS, DOT-17E AND 17H


description:
55 GALLON TIGHT HEAD STEEL DRUM, 20/18 GAUGE, DOT-17E


description:
PARTS AND ACCESSORIES, STEEL DRUM (NOT COVERS)


description:
ADAPTER, SADDLE, FOR USE W/BASCO DRUM DUMPER NO. 285 A-HD, BASCO NO. 55/30-22 OR EQUAL


description:
CUTTER, DRUM HEAD, 21 IN. LONG, TUBULAR STEEL HANDLE, BASCO NO. DDH-2 OR EQUAL


description:
CUTTER BLADE, FOR USE WITH BASCO NO. DDH-2 DRUM HEAD CUTTER, BASCO NO. DDH-P202 OR EQUAL


description:
FAUCET, DRUM, 3/4 IN., SELF-CLOSING, W/FLAME ARRESTOR


description:
GRABBER, DRUM, FOR LIFTING OR LOWERING 55 GAL. STEEL DRUMS, HANDLES CLOSED OR OPEN DRUMS, 1000 LB. CAPACITY, BASCO NO. 90-S OR EQUAL


description:
HOOK, SINGLE TINE, CONVERTS FORKLIFT TO MOBILE JIB CRANE, HIGH TENSILE WING BOLT AND SAFETY CHAIN, 4000 LB. CAPACITY, BASCO NO. DHE-STH-L OR EQUAL


description:
HOOK, SAFETY SWIVEL, FOR USE WITH BASCO NO. DHE-STH-L SINGLE TINE HOOK, BASCO NO. JIB-P133-DHE EQUAL


description:
RING, BOLT, FOR 55 GAL. DRUM, 5/8 IN. THREADED LUGS, 12 GAUGE RING, W/NUTS AND BOLTS,  BASCO NO. 12-5514H OR EQUAL


description:
RING, CLOSING, BOLTED STEEL, FOR 55 GALLON OPEN HEAD STEEL DRUMS


description:
RING, CLOSING, BOLTED STEEL, FOR STEEL OVERPACK SALVAGE DRUMS FOR USE WITH 55 GALLON STEEL DRUMS


description:
TRUCK, HAND, EXTRA HEAVY DUTY, STEEL WHEELS, 1000 LB. CAPACITY, 4-WHEEL DESIGN, BASCO NO. 74SS OR EQUAL


description:
BEARINGS (EXCEPT WHEEL BEARINGS AND SEALS -SEE CLASS 060)


description:
BEARINGS, BALL, MISC., BRAND LISTED OR EQUAL


description:
INA 63012Z, MEDIUM DUTY, DEEP GROOVE, DBL. SHIELD


description:
NTN NO. R6ZZC3/5C, SINGLE ROW, DOUBLE SHIELD


description:
NO. AS3PP, SINGLE ROW, 2 SEALS, STAINLESS STEEL


description:
NO. GRAO12RRB, WIDE INNER RING W/COLLARS


description:
NO. 608.2RSR.C3, SMALL RADIAL, DEEP GROOVE, 2 RUBBER SEALS


description:
NO. 6201.2RSR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6202.2RSR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6203.2RS.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6204.2ZR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6205.2RSR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6205.2ZR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6206.2ZR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6207.2RSR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6207.2ZR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6212.2RSR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6213.2RSR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6213.2ZR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6214.2ZR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6302.2RSR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6302.2ZR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6305.2RSR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6307.2RSR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6308.2ZR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6309.2RSR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6309.2ZR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6310.2RSR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6311.2RSR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6312.2RSR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6315.2RSR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6317.2RSR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 6318.2ZR.C3.L12, RADIAL, DEEP GROOVE


description:
NO. 120KSZZ, PRECISION GRADE, GRADE ABEC-1


description:
NO. 207SZZG, SINGLE ROW, CARTRIDGE WIDTH, DEEP GROOVE


description:
NO. 5213 CFF, DOUBLE ROW, STANDARD WIDTH, GRADE ABEC-1


description:
NO. 5215 CZZ, DOUBLE ROW, STANDARD WIDTH, GRADE ABEC-1


description:
NO. 5218 MFF, DOUBLE ROW, STANDARD WIDTH, GRADE ABEC-1


description:
NO. 5219, DOUBLE ROW, PRECISION GRADE, GRADE ABEC-1


description:
NO. 5307C, DOUBLE ROW, PRECISION GRADE, GRADE ABEC-1


description:
NO. 5313 MFG, DOUBLE ROW, STANDARD WIDTH, GRADE ABEC-1


description:
NO. 5315C, DOUBLE ROW, PRECISION GRADE, GRADE ABEC-1


description:
NO. 5315MF1, DOUBLE ROW, PRECISION GRADE, GRADE ABEC-1


description:
NO. 5316 MG, DOUBLE ROW, STANDARD WIDTH, GRADE ABEC-1


description:
BALL BEARINGS, NATIONAL (NATIONAL OR EQUAL)


description:
NO. 316 2ZNRJ, DOUBLE SHEILD, SNAP RING GROOVE


description:
Bearing Assemblies (Including Hanger Bearings and Custom-Made Bearings)


description:
BEARING ASSEMBLIES, BALL, FAFNIR (FAFNIR OR EQUAL)


description:
BEARING ASSEMBLIES, BALL, SEALMASTER (SEALMASTER OR EQUAL)


description:
NO. SFT23, STANDARD DUTY, 2 BOLT FLANGE UNIT


description:
NO. TFT23TC1, STANDARD DUTY, 2 BALL FLANGE UNIT


description:
NO. TFT23TC2, STANDARD DUTY, 2 BALL FLANGE UNIT


description:
BEARING ASSEMBLIES, BALL, SKF (SKF OR EQUAL)


description:
NO. SAF510 11-16, SPLIT MOUNTED 11/16 IN.


description:
NO. SNW 10X1 11/16, MOUNTED 10X1-11/16 ADAPTER KIT


description:
BEARING ASSEMBLIES, ROLLER (BRAND LISTED OR EQUAL)


description:
LINKBELT NO. EFRB22455H, 3-7/16 IN., FLANGE UNIT


description:
LINKBELT NO. PB22448H, COLLAR MOUNTED, SPHERICAL, 3 IN. SHAFT


description:
REX NO. MT 10 5307, TAKE UP BLOCK ASSEMBLY FOR 3-7/17 IN. SHAFT


description:
REX NO. ZN6 2115, SINGLE SET COLLAR, MOUNTED, 1-15/16 IN.


description:
Bearings and Parts (For Marine Equipment)


description:
BRONZE, BUSHING, RUBBER LINER, 1-3/4 IN. I.D., 2-3/8 IN. O.D., 6-1/2 IN. THICK, CUTLASS BRGKIP OR EQUAL


description:
BROWNING NO. VPLE-216, RIGID MT., 1 IN. BORE


description:
FAFNIR NO. RAK 1 11/16NT, 1-11/16 IN., CORROSION RESISTANT


description:
FAFNIR NO. RSA 1 3/16NT, 1-3/16 IN., CORROSION RESISTANT


description:
ROYERSFORD NO. 60220200, 2 IN. BORE, CAST IRON, SPLIT BRONZE BUSHING, F/BRYAN BEACH DRAWBRIDGE


description:
Roller and Needle Bearings and Parts, Straight


description:
BEARINGS, NEEDLE (BRAND LISTED OR EQUAL)


description:
BEARING, ROLLER, STRAIGHT (BRAND LISTED OR EQUAL)


description:
BEARING, HEAVY DUTY, INNER RACE FOR MR24S NEEDLE, MCGILL NO. M119 OR EQUAL


description:
BEARINGS, ROLLER, TAPERED (BRAND LISTED OR EQUAL)


description:
LINKBELT NO. EFRB224455H, SPHERICAL, 3-7/16 IN. FLANGE


description:
SKF NO. 29428EJ, SPHERICAL, EJ THRUST TRICKLING FILTER


description:
BEARINGS, ROLLER, CONE, TAPERED, TIMKEN (TIMKEN OR EQUAL)


description:
BEARINGS, ROLLER, CUP, TAPERED, TIMKEN (TIMKEN OR EQUAL)


description:
BEARINGS, SLEEVED, ROLLER (BRAND LISTED OR EQUAL)


description:
BELTS AND BELTING: CONVEYOR, ELEVATOR, POWER TRANSMISSION, AND V-BELTS


description:
Accessories: Dressing, Hooks, Laces, etc.


description:
450 GRAM SPRAY CAN, KLEEN-FLO NO. 762 OR EQUAL


description:
1/4 IN. TO 13/32 IN. X 20 IN. WIDE, HINGED, F/ROTOMILL


description:
1/4 IN. TO 5/8 IN. X 20 IN. WIDE, HINGED, F/ROTOMILL


description:
1/4 IN. TO 5/8 IN. X 24 IN., STEEL, HINGED, FOR ROTOMILL MACHINE, FLEXCO NO. 550J24NC OR EQUAL


description:
NO. 35N, STEEL, F/ ALLIGATOR BELT, 2/SET


description:
BELTS, V, FRACTIONAL H.P., RECYCLED (BRAND LISTED OR EQUAL)


description:
Conveyor and Elevator: Neoprene, Plastic, and Rubber


description:
120 CBS, 11/64 IN. THICK, 52 IN. WIDE, 44 LINEAR FEET LONG


description:
8-1/16 IN. W X 3/16 IN. THICK, BLACK W/NYLON FIBRE MIDDLE - 200 FT./ROLL


description:
6 IN. X 3/16 IN. THICK, 5 PLY, 182 LB TENSION RATING


description:
7 IN. X 3/16 IN. THICK, 4 PLY, 182 LB TENSION RATING


description:
8 IN. X 1/4 IN. THICK, 5 PLY, 225 LB TENSION RATING


description:
3/8 IN. W X 9/32 IN. THICK, 60 IN. DIA., PLAIN, BLACK


description:
FASTENER KIT FOR HINGED CONVEYOR BELT,  FLEXCO NO. 550J24NC OR EQUAL


description:
Conveyor, Food Processing: Neoprene, Plastic, and Rubber


description:
Flat Belts, Automotive and Lawn Mower (Serpentine) Plain and Grooved, Rubber


description:
070-1 LGTH. X 1/2 IN. X 5/16 IN. X 36 DEG., STANDARD CROSS SECTION, SIMPLICITY NO. 108505 OR EQUAL


description:
86 IN. LONG X 1/2 IN. X 1/2 IN., SMOOTH, FLAT


description:
97-1/2 IN. LONG X 1/2 IN. X 9/16 IN., SMOOTH, FLAT


description:
102 IN. LONG X 1/2 IN. THICK X 3-1/2 IN. WIDE, GATES NO. 5VX950 OR EQUAL


description:
114 IN. LONG X 1/2 IN., DOUBLE SIDED, FOR JACOBSEN MODEL C420G MOWER W/50 IN.  CUTTING DECK,  NO. 395124 OR EQUAL


description:
133 IN. LONG X 11/16 IN., DOUBLE SIDED, FOR JACOBSEN MODEL C420G RIDING  MOWER W/60 IN.  CUTTING DECK,  NO. 390264 OR EQUAL


description:
1/2 IN. X 57 IN., FIAT-ALLIS NO. 4795708 OR EQUAL


description:
1/2 IN. X 57 IN., FIAT-ALLIS NO. 98408533 OR EQUAL


description:
5/8 IN. W. X 97.6 IN. L., MOTORCRAFT NO. F6TE-8620-HA OR EQUAL


description:
9/16 IN. X 88-3/4 IN. X 40 DEG., MAIN DRIVE, V-RIBBED, GATES NO. KO40882 OR EQUAL


description:
11/16 IN. X 34-1/4 IN. X 40 DEG., V-RIBBED, INTERNATIONAL NO. 586452C1 OR EQUAL


description:
3/4 IN. X 44 IN. LONG, W/6 GROOVES, BLACK


description:
13/16 IN. X 98 IN. LONG, SERPENTINE, FORD NO. E5TE-8620FA OR EQUAL


description:
27/32 IN. X 47-5/8 IN., 40 DEG., V-RIBBED, GATES NO. K060470 OR EQUAL


description:
27/32 IN. X 68-1/8 IN. LONG X 40 DEG., 6 RIB, SERPENTINE, GATES NO. K060675 OR EQUAL


description:
27/32 IN. X 91-5/8 IN. L, MICRO-V 6 GROOVE, SERPENTINE, FORD NO. E8TZ-8620H OR EQUAL


description:
27/32 IN. X 95-1/8 IN. LONG, 40 DEG., V-RIBBED


description:
27/32 IN. X 69-1/4 IN. L X 40 DEG, GATES NO. K060685 OR EQUAL


description:
27/32 IN. X 71 IN. LONG. X 40 DEG., 6 V-RIBBED, GATES NO. K060710 OR EQUAL


description:
27/32 IN. X 91-5/8 IN. LONG X 40 DEG., 6 V-RIBBED, GATES NO. K060915 OR EQUAL


description:
27/32 IN. X 96-5/8 IN. LONG X 40 DEG., 6 V RIBBED


description:
27/32 IN. X 97-1/4 IN. LONG X 40 DEG., 6 V RIBBED


description:
27/32 IN. X 99-1/2 IN., 40 DEG., 6 V-RIBBED, GATES NO. K060988 OR EQUAL


description:
27/32 IN. X 100-1/2 IN., 40 DEG., 6 RIBBED, GATES NO. KO61005 OR EQUAL


description:
27/32 IN. X 101-5/8 IN. LONG X 40 DEG., 6 V-RIBBED, GATES NO. K061010 OR EQUAL


description:
27/32 IN. X 99-5/8 IN. LONG X 40 DEG., V-RIBBED, GATES NO. K060990 OR EQUAL


description:
1 IN. W X 97-7/8 IN. L  X 40 DEG, GATES NO. K070975 OR EQUAL


description:
1 IN. W X 98 IN. L X 40 DEG., V-RIBBED, GATES NO. K070976 OR EQUAL


description:
1-1/8 IN. X 57 IN., V-RIBBEDE, 8 RIB, INTERNATIONAL NO. 1609665C1


description:
1-1/8 IN. W X 58 IN. L, 7-GROOVE, MOTORCRAFT NO. JK8-590 OR EQUAL


description:
1-1/8 IN. W X 66-1/2 IN. L, 7-GROOVE, CUMMINS NO. 3920430 OR EQUAL


description:
1-1/8 IN. X 71 IN. LONG, 40 DEG., V-RIBBED, ALTERNATOR AND FAN


description:
1-1/8 IN. X 73-5/8 IN., 40 DEG., V-RIBBED, GATES NO. K080730 OR EQUAL


description:
21 MM X 1,145 MM, MULTI-GROOVE, SERPENTINE, FORD NO. F3TZ-8620A OR EQUAL


description:
25MM X 67-1/2 IN., 40 DEG., 7 RIBBED, GATES NO. KO70675 OR EQUAL


description:
BELTS, LAWN MOWER (BRAND LISTED OR EQUAL)


description:
BELTS, SERPENTINE TYPE - BRAND LISTED OR EQUAL


description:
INTERNATIONAL (IHC) 1257770H1, SERPENTINE, 1 IN. W X 1549.4MM LONG, MULTI-GROOVE


description:
INTERNATIONAL (IHC) 473462R4, F/ CUB TRACTOR


description:
INTERNATIONAL (IHC) 473468R2, F/ CUB TRACTOR


description:
JOHN DEERE NO. R108842, 75 IN. L X 1-1/8 IN. TOP WIDTH, V-RIBBED, FOR MODEL 490E EXCAVATOR


description:
Power Transmission: Neoprene, Plastic, and Rubber


description:
BELTS, POWER TRANSMISSION, RUBBER, BRAND LISTED OR EQUAL


description:
4 PLY X 8 IN. WIDE X 1/4 IN. THICK, SMOOTH, DEFLECTOR, 50 FT/ROLL


description:
4 PLY X 10 IN. WIDE X 1/4 IN. THICK, SMOOTH, DEFLECTOR, 84 FT/ROLL


description:
4 PLY X 10 IN. WIDE X 1/4 IN. THICK, SMOOTH, DEFLECTOR, 100FT/ROLL


description:
4 PLY X 10 IN. WIDE X 1/4 IN. THICK, SMOOTH, DEFLECTOR, 135FT/ROLL


description:
BELTS, FAN AND GENERATOR - DAYCO (SERIES 15000) OR EQUAL


description:
BELTS, FAN AND GENERATOR - DAYCO (SERIES 17000) OR EQUAL


description:
BELTS, FAN AND GENERATOR - DAYCO (SERIES 20000) OR EQUAL


description:
BELTS, FAN AND GENERATOR - DAYCO (SERIES 30000) OR EQUAL


description:
BELTS, FAN AND GENERATOR - DURKEE - ATWOOD OR EQUAL


description:
BELTS, FAN AND GENERATOR - GATES (SERIES 00 THRU 299) OR EQUAL


description:
BELTS, FAN AND GENERATOR - GATES SERIES 300 THRU 600) OR EQUAL


description:
BELTS, FAN AND GENERATOR - GATES (SERIES 600 THRU 799) OR EQUAL


description:
BELTS, FAN AND GENERATOR - GATES (SERIES 800 THRU 999) OR EQUAL


description:
BELTS, FAN AND GENERATOR - GATES (SERIES 1000 THRU 1999) OR EQUAL


description:
BELTS, FAN AND GENERATOR - GATES (SERIES 6000) OR EQUAL


description:
BELTS, FAN AND GENERATOR - GATES (SERIES 7000) OR EQUAL


description:
BELTS, FAN AND GENERATOR - GATES (SERIES 8000 THRU 8299) OR EQUAL


description:
BELTS, FAN AND GENERATOR - GATES (SERIES 8300 THRU 8499) OR EQUAL


description:
BELTS, FAN AND GENERATOR - GATES (SERIES 8500 THRU 8699) OR EQUAL


description:
BELTS, FAN AND GENERATOR - GATES (SERIES 9000 THRU 9399) OR EQUAL


description:
BELTS, FAN AND GENERATOR - GATES (SERIES 9400 THRU 9699) OR EQUAL


description:
BELTS, FAN AND GENERATOR - GATES (SERIES 9700 THRU 9899) OR EQUAL


description:
BELTS, V, PULLEY GROOVE A (GATES OR EQUAL)


description:
BELTS, V, PULLEY GROOVE B (GATES OR EQUAL)


description:
BELTS, FAN AND GENERATOR - BRAND LISTED OR EQUAL


description:
FAN, GENERAL MOTORS NO. 2099791 (2 BELTS)


description:
FAN, GENERAL MOTORS NO. 3887684 (2 BELTS)


description:
BELTS, INDUSTRIAL - BRAND LISTED OR EQUAL, (A THRU M)


description:
ADDCO NO. 001-1472, BELT, ALTERNATOR, FOR MESSAGE BOARDS


description:
CATERPILLAR NO. 9L0619, 1/2 IN. X 48 IN. (13 X 1219MM) MATCHED SET


description:
CUMMINS NO. 3911557, 1-1/8 IN. W, 7-GROOVE X 57 IN. L


description:
CUSHMAN NO. 548421 (FOR RYAN/CUSHMAN SOD CUTTER)


description:
DAYCO 5R5VX710, F/ ELGIN CROSSWIND SWEEPER


description:
FIAT-ALLIS NO. 73148503, 36 DEGREE, 52 IN. X 3/4 IN., MATCHED SET OF TWO


description:
FIAT-ALLIS NO. 75206822, 40 DEGREE, FLAT BELT, SERPENTINE, 59-5/8 IN. X 1- 1/8 IN., V-RIBBED


description:
GMC NO. 11502414 (HYD. FLUID PUMP, C70 SERIES)


description:
GOODYEAR 84230, INSTA-POWER, LAWN AND GARDEN


description:
GOODYEAR 84240, INSTA-POWER, LAWN AND GARDEN


description:
GOODYEAR 84250, INSTA-POWER, LAWN AND GARDEN


description:
GOODYEAR 84310, INSTA-POWER, LAWN AND GARDEN


description:
JOHN DEERE NO. AR-99382, MATCHED SET, 66 IN. L X 3/4 IN. W


description:
JOHN DEERE NO. T-68320, 43 IN. L X 1/2 IN. W


description:
JOHN DEERE NO. T-149108, 53 IN. X 1/2 IN.


description:
BELTS, INDUSTRIAL - BRAND LISTED OR EQUAL, (N THRU Z)


description:
BELTS, INDUSTRIAL - GATES (SERIES A AND B)


description:
BELTS, INDUSTRIAL - GATES (SERIES C AND D)


description:
BELTS, INDUSTRIAL, NOTCHED - GATES OR EQUAL


description:
BELTS, INDUSTRIAL, NOTCHED -  BRAND LISTED OR EQUAL


description:
CASE NO. K311714, 1/2 IN. X 50 IN., FOR MODEL 1594 TRACTOR


description:
BELTS, V, COGGED TYPE (BRAND LISTED OR EQUAL)


description:
BELTS, V, FRACTIONAL HP - GATES OR EQUAL (SERIES 3L AND 4L)


description:
BELTS, V, FRACTIONAL HP - GATES OR EQUAL (SERIES 5L)


description:
BELTS, V, FRACTIONAL HP - BRAND LISTED OR EQUAL


description:
V-Belts, Wedge Type, Oil and Heat Resistant, and Static Conducting


description:
BELTS, V, HEAT AND OIL RESISTANT (BRAND LISTED OR EQUAL)


description:
Biochemical Reagents and Tests: Antibiotic Assays, Differentiation Discs, etc.


description:
AED CALIBRATOR SET, CONTAINING PHENYTOIN, PHENOBARBITAL, PRIMIDONE, CARBAMAZEPINE, AND ETHOSUXAMIDE, 6 X 3ML/SET, SYVA NO. 6A089 OR EQUAL


description:
CARBAMAZEPINE ASSAY KIT, 50 TESTS/KIT, SYVA NO. 6F109 OR EQUAL


description:
ETHOSUXAMIDE ASSAY KIT, 50 TESTS/KIT, SYVA NO. 6E119 OR EQUAL


description:
PHENOBARBITAL ASSAY KIT, 100 TESTS/KIT, SYVA NO. 6D019 OR EQUAL


description:
PHENOBARBITAL CONVENIENCE PACK, 1OO/PACKAGE, SYVA NO. 5D009 OR EQUAL


description:
PHENYTOIN ASSAY KIT, 100 TESTS/KIT, SYVA NO. 6B009 OR EQUAL


description:
PHENYTOIN CONVENIENCE PACK, 1OO/PACKAGE, SYVA NO. 5A009 OR EQUAL


description:
PRIMIDONE ASSAY KIT, 50 TESTS/KIT, SYVA NO. 6C119 OR EQUAL


description:
THEOPHYLLINE ASSAY KIT, 100 TESTS/KIT, SYVA NO. 6P019 OR EQUAL


description:
THEOPHYLLINE CALIBRATORS CONVENIENCE PACK, 6 X 1ML/SET, SYVA NO. 5P109 OR EQUAL


description:
THEOPHYLLINE CONVENIENCE PACK, 1OO/PACKAGE, SYVA NO. 5P009 OR EQUAL


description:
VALPROIC ASSAY KIT, 100 TESTS/KIT, SYVA NO. 6G009 OR EQUAL


description:
NOVOBIOCIN, 5MCG, BBL NO. 31314 OR EQUAL, 10/CARTON


description:
NYSTATIN (100 MCG), BBL NO. 31550(MYCOSTATIN) OR EQUAL


description:
SXT (SULFAMETHOXAZOLE 23.75 MCG - TRIMETHOPRIM 1.25 MCG), BAL NO. 31539 OR EQUAL, 10 X 50 DISCS/BOX


description:
TAXO A, FOR PRESUMPTIVE PNEUMOCOCCI IDENTIFICATION OF GROUP A HEMOLYTIC STREPTOCOCCI, BBL NO. 31040 OR EQUAL, 100/BTL


description:
TAXO-A, BBL NO. 31552 OR EQUAL, 10 CART/BOX


description:
TAXO-P, FOR PNEUMOCCOCCI, BBL NO. 31048 OR EQUAL, 10 CART/BOX


description:
TAXO P, FOR PRESUMPTIVE IDENTIFICATION , BBL NO. 31046 OR EQUAL, 100/BTL


description:
BENZYLPENICILLIN (PG), LOW STRENGTH 0.002-32 UG/ML, REMEL NO. 1-0268 OR EQUAL, 100 STRIPS/PKG


description:
VANCOMYCIN, REMEL NO. 1-2550 OR EQUAL, 3 STRIPS/PKG


description:
WITH DESSICANT, REMEL NO. 51-6000, 20 TUBES/PKG.


description:
Biochemicals: Amino Acids, Enzymes, Nucleotides, Peptides, etc.


description:
Blood Fractions (Not for Human Use): Antigens, Antiserums, Controls, Serums, etc.


description:
ANTIGEN, VDRL FLOCCULATION, W/60ML BUFFERED SALINE


description:
10 X 0.5ML/PACKAGE, MUST BE APPROVED BY NODC, DIFCO OR EQUAL


description:
SALMONELLA O, 3ML/VIAL, DIFCO NO. 2264-47 OR EQUAL


description:
SHIGELLA ANTI-SERUM A, 3ML/VIAL, DIFCO NO. 2834-47-3 OR EQUAL


description:
SHIGELLA ANTI-SERUM A1, 3ML/VIAL, DIFCO NO. 2776-47-3 OR EQUAL


description:
SHIGELLA ANTI-SERUM B, 3ML/VIAL, DIFCO NO. 2835-47-2 OR EQUAL


description:
SHIGELLA ANTI-SERUM C, 3ML/VIAL, DIFCO NO. 2836-47-1 OR EQUAL


description:
SHIGELLA ANTI-SERUM C1, 3ML/VIAL, DIFCO NO. 2777-47-2 OR EQUAL


description:
SHIGELLA ANTI-SERUM C2, 3ML/VIAL, DIFCO NO. 2778-47-1 OR EQUAL


description:
SHIGELLA ANTI-SERUM D, 3ML/VIAL, DIFCO NO. 2837-47-0 OR EQUAL


description:
Chemicals, Isotopically Labeled (With Deuterium, Radionuclides, etc.)


description:
AGAR, BACTO NO. 0140-01-0 OR EQUAL, 1 LB/JAR


description:
BRAIN HEART INFUSION AGAR, BACTO NO. 0418-0105 OR EQUAL, 1 LB/JAR


description:
CARBOLFUCHSIN 2N, TB - DIFCO NO. 3313-76-5, 6 X 250 ML, 6/PKG


description:
DEXTROSE, BACTO NO. 0155-17-4 OR EQUAL, 500GM/BOTTLE


description:
DEXTROSE AGAR, BACTO-SABOURAND NO. 0109-17-1 OR EQUAL, 500GM/BOTTLE


description:
LOWENSTEIN MEDIUM JENSEN, BACTO NO. 1017-79-5 OR EQUAL, 100 TUBES/PACKAGE


description:
MACCONKEY AGAR MEDIUM, BACTO NO. 007501-9 OR EQUAL


description:
MIDDLEBROOK 7H10 AGAR SLANTS, DIFCO NO. 0627-79-9 OR EQUAL


description:
PERMOUNT MOUNTING MEDIUM, FISHER NO. SP15-500 OR EQUAL, 500ML/BOTTLE


description:
PLATE COUNT AGAR, BACTO NO. 0479-01-1 OR EQUAL


description:
PM POSITIVE CONTROL (PENICILLIN G), BACTO NO. 1802-33-9 OR EQUAL, 6 VIAL/PACKAGE


description:
THERMOSPORE SUSPENSION PM (PENICILLIN IN MILK), BACTO NO. 1801-60-6 OR EQUAL, 6 X 10ML/PACKAGE


description:
VIOLET RED BILE AGAR, BACTO NO. 0012-01-5 OR EQUAL


description:
AGAR, BACTERIOLOGICAL GRADE, GIBCO NO. M00010B OR EQUAL - 1 LB./BOTTLE


description:
AGAR BASE, G.C., GIBCO NO. M22,400B OR EQUAL - 1 LB./BOTTLE


description:
CVA ENRICHMENT LYOPHILIZED, GIBCO NO. D1006 OR EQUAL - 30ML/VIAL


description:
CVA RESTORING SOLUTION, GIBCO NO. D1506 OR EQUAL - 30ML/VIAL


description:
HEMOGLOBIN, BOVINE, MICROBIOLOGICAL GRADE, GIBCO NO. M00230B OR EQUAL - 1 LB./BOTTLE


description:
VCAT (VANCOMYCIN-COLISTIN ANISOMYCIN TRIMETHOPRIM LACTATE), GIBCO NO. D7006OR EQUAL - 30ML/VIAL


description:
Culture Media, Prepared (For Microbial Cultures See 495-38)


description:
BRANHAMELLA CATARHALIS, ATCC NO. 49143 OR EQUAL


description:
CANDIDA ALBICANS, BBL NO. 10231 OR EQUAL


description:
ENTEROCOCOUS FAECALIS, ATCC NO. 29212 OR EQUAL


description:
ESCHERICHIA COLI, ATCC NO. 25922 OR EQUAL


description:
GARDNERLLA VAGINALIS, ATCC NO. 49145 OR EQUAL


description:
HAEMOPHILUS INFLUENZA, ATCC NO. 49144 OR EQUAL


description:
HAEMOPHILUS PARAPHROPHIL, ATCC NO. 49146 OR EQUAL


description:
KLEBSIELLA OXYTOCA, ATCC NO. 49131 OR EQUAL


description:
MICROCOCOUS LEUTUS, ATCC NO. 533 OR EQUAL


description:
NEISSERIA LACTAMICA, ATCC NO. 49142 OR EQUAL


description:
PROTEUS VULGARIS, ATCC NO. 49132 OR EQUAL


description:
PSEUDOMORAS AERUGINOSA, ATCC NO. 27853 OR EQUAL


description:
STAPHYLOCOCOUS AUREUS, ATCC NO. 29213 OR EQUAL


description:
STREPTOCOCOUS BOUIS, ATCC NO. 49147 OR EQUAL


description:
STREPTOCOCOUS PYOSENES, ATCC NO. 19615 OR EQUAL


description:
STREPTOCOCOUS, GROUP A, DPC NO. G5AL OR EQUAL


description:
STREPTOCOCOUS, GROUP B, DPC NO. G5BL OR EQUAL


description:
STREPTOCOCOUS, GROUP C, DPC NO. G5CL OR EQUAL


description:
STREPTOCOCOUS, GROUP F, DPC NO. G5FL OR EQUAL


description:
SPREPTOCOCCUS, GROUP F, DPC NO. G5GL OR EQUAL


description:
BHI BROTH, 0.5ML, 10/BOX, BBL NO. 21777 OR EQUAL


description:
GN BROTH, 10/CASE, BBL NO. 21729 OR EQUAL


description:
INDOLE NITRATE, TUBED, 10 X 125 MM, 10/PKG


description:
M-ENDO, MF, BACTO NO. 0749-01-05 OR EQUAL, 1 LB/JAR


description:
MAELLER DACARBOXYLASE W/ARGININE, TUBED, 10 X 125 MM, 10/PKG


description:
MAELLER DACARBOXYLASE W/LYSINE, TUBED, 10 X 125 MM, 10/PKG


description:
MAELLER DECARBOXYLASE, W/ORNTHINE, 5 ML, 16 X 102 MM, 10/PKG


description:
SELENITE F, TUBED, 8 ML, 10 X 125 MM, 10/PKG


description:
TRIPTIC SOY BROTH WITH 20% GLYCEROL, 10/PACKAGE, BBL NO. 96346 OR EQUAL


description:
ACETATE DIFF. AGAR, 20/PKG, REMEL NO. 06-0022 OR EQUAL


description:
BACTO-LOWENSTEIN MEDIUM, SLANT TUBES, 100/CASE, JENSEN BBL NO. 21388 OR EQUAL


description:
BACTO-MIDDLEBROOK 7H10 AGAR W/ASPARTIC ACID, SLANT TUBES, 100/CASE, BBL NO. 97396 OR EQUAL


description:
BILE ESCULIN AGAR SLANTS, 10 X 125 MM, 10/PKG


description:
BILE ESCULIN AGAR SLANTS, 12/PACKAGE, BBL NO. 21409 OR EQUAL


description:
BITE ESCULIN, 100/CS, REMEL NO. 06-0292 OR EQUAL


description:
BRAIN HEART INFUSION, TUBED, 5 ML, 10 X 125 MM, 10/PKG


description:
CETRIMIDE AGAR, 20/PKG, REMEL NO. 06-0472 OR EQUAL


description:
CTA W/LACTOSE, 10 ML, 10 X 125 MM, 10/PKG


description:
CTA W/SUCROSE, 10 ML, 10 X 125 MM, 10/PKG


description:
CAMPYLOBACTER AGAR, W/5 ANTIMICROGIOTICS AND 10% SHEEP BLOOD, 20/PACKAGE, BBL NO. 21727 OR EQUAL


description:
CASEIN AGAR, POUR TUBES, REMEL #082102 OR EQUAL - 10 SETS/PKG.


description:
CHOCOLATE AGAR, SLANTS, RUPP & BOWMAN #21348 OR EQUAL - 10 SLANTS/PKG.


description:
CHOCOLATE AGAR SLANTS WITH ENRICHMENT, 10 X 125MM, 10/PKG


description:
CHOCOLATE AGAR, SLANTS WITH ENRICHMENT, 10MM X 125MM - 20 SLANT TUBES/CS


description:
CHOCOLATE AGAR, SLANTS, W/ENRICHMENT, 15 X 103 MM, 20 SLANTS TUBES/CS


description:
CHOCOLATE AGAR, SLANTS, 20 X 113 MM, 20 SLANTS/PKG


description:
CHOCOLATE AGAR W/HEMOGLOBIN AND ISOVITALEX, 100/PACKAGE, BBL NO. 21267 OR EQUAL


description:
CITRATE SIMMION'S AGAR, 100/CS, REMEL NO. 06-0494 OR EQUAL


description:
DADE SERIES I/S ANTI-STREPTOLYSIN O TEST, 50 TEST SIZE, MICROSCAN NO. B6908-1 OR EQUAL


description:
ENTEROCOCCOSEL AGAR SLANTS, 10/PACKAGE, BBL NO. 21381 OR EQUAL


description:
ESCULIN BROTH, TUBED, 5ML DEEP - 10 TUBES/CS


description:
ESCULIN BROTH, REMEL #060872 OR EQUAL - 20/PKG.


description:
ESCULIN HYDROLYSIS, 100/CS, REMEL NO. 06-0876 OR EQUAL


description:
HEART INFUSION AGAR, 20/PKG, REMEL NO. 06-1012 OR EQUAL


description:
HEART INFUSION BROTH, 100/CS, REMEL NO. 06-1030 OR EQUAL


description:
HEKTOEN ENTERIC AGAR, 20/PACKAGE, BBL NO. 21365 OR EQUAL


description:
GC AGAR BASE, FOR SUSCEPTIBILITY TESTING PLATES, 15 X 150 MM, 10 PLATES/PKG


description:
GI MOTILITY WITHOUT IND., 100/CS, REMEL NO. 06-1398 OR EQUAL


description:
GONO-PAK W/THAYER MARTIN AGAR W/ANISOMYCIN, FOR TRANSPORTING AND CULTIVATION OF NEISSERIA GONORRHEA AND N. MENINGITIDIS, 20/PACKAGE, BBL NO. 21795 OR EQUAL


description:
JORDAN'S TARTRATE, 20/PKG, REMEL NO. 06-1202 OR EQUAL


description:
KALLESTAD HEP-2 ANTINUCLEAR FACTOR KIT NO. 1216, 48 TESTS/KIT


description:
LOEFFLER BLOOD SERUM, SLANTS, REMEL #061288 OR EQUAL - 20 SLANTS/PKG.


description:
LOWENSTEIN JENSEN, DEEPS, REMEL #09-512 OR EQUAL - 20 DEEPS/PKG.


description:
LOWENSTEIN JENSEN, SLANTS, REMEL #08-500 OR EQUAL - 100 SLANTS/CS.


description:
LOWENSTEIN JENSEN-GRUFT MODIFICATION, SLANTS, REMEL #08-520 OR EQUAL - 100 SLANTS/CS.


description:
LOWENSTEIN JENSEN-IRON UPTAKE, SLANTS, RUPP & BOWMAN #97206 OR EQUAL - 10 SLANTS/PKG.


description:
LOWENSTEIN JENSEN-IRON UPTAKE SLANTS, RUPP AND BOWMAN NO. 97206 OR EQUAL - 20 SLANT TUBES/CS


description:
LOWENSTEIN JENSEN SLANTS, WITH SODIUM CHLORIDE - 10 TUBES/CS


description:
LOWENSTEIN JENSEN-WITH SODIUM CHLORIDE, REMEL # 08-518 OR EQUAL - 20 SLANTS/PKG


description:
MACCONKEY AGAR, W/O DEHYDRATED MEDIA, DIFCO NO. 1818171, 500 GMS


description:
MACCONKEY AGAR, PLATED, REMEL NO. 01-550 OR EQUAL, 10/PKG


description:
MACCONKEY AGAR, 100/PACKAGE, BBL NO. 21270 OR EQUAL


description:
MACCONKEY SORB, 10/PKG, REMEL NO. 01-556 OR EQUAL


description:
MACCONKEY SORBITOL, W/O DEHYDRATED MEDIA, DIFCO NO. 0079177, 500 GMS


description:
MIDDLEBROOK SELECTIVE 7H11 AGAR, RUPP & BOWMAN #97654 OR EQUAL - 100 SLANTS/PKG


description:
MIDDLEBROOK, ENRICHMENT, "ADG", 20 MIL VIAL, 10 VIALS/BOX


description:
MIDDLEBROOK, ENRICHMENT, "OADC", 20 ML/VIAL, 10 VIALS/PKG


description:
MITCHISON, SELECTIVE 7H11 AGAR, TUBED, SLANTS, 100 SLANTS/PKG


description:
MUCIC BROTH, RUPP & BOWMAN #96135 OR EQUAL - 10/PKG.


description:
MUELLER HINTON, 150MM, 10/PKG, REMEL NO. 04-050, OR EQUAL


description:
MUELLER HINTON AGAR, W/BLOOD, 10 PLATES/PKG


description:
MYCOSEL, AGAR SLANTS, 10 X 125 MM, 10/PKG


description:
NITRITE BROTH, 20/PKG, REMEL NO. 06-1552, OR EQUAL


description:
NITRATE BROTH, 20/PKG, REMEL NO. 06-1532, OR EQUAL


description:
NOCARDIA QUAD, 10/PKG, REMEL NO. 02-462 OR EQUAL


description:
NUTRIENT AGAR, 100/CS, REMEL NO. 06-1570 OR EQUAL


description:
PEPTONE YEAST EXTRACT GLUCOSE BROTH (PYG), RUPP & BOWMAN #93195 OR EQUAL - 10/PKG.


description:
PHENYLALANINE AGAR, 20/PKG, REMEL NO. 06-2182 OR EQUAL


description:
PHENYLALANINE SLANTS, 16 X 102 MM, 10/PKG


description:
PSEUDOMONAS P AGAR, 20/PKG, REMEL NO. 06-2638 OR EQUAL


description:
PSEUDOMONAS F, 20/PKG, REMEL NO. 06-2632 OR EQUAL


description:
PLATE COUNT AGAR, 100/CS, REMEL NO. 06-2600 OR EQUAL


description:
SABOURAUD DEXTROSE AGAR, SLANTS, 10/PACKAGE, BBL NO. 97072 OR EQUAL


description:
SABOURAUD DEXTROSE AGAR, SLANTS, 20/PACKAGE, BBL NO. 21180 OR EQUAL


description:
SABOURAND DEXTROSE AGAR W/GENTAMYCIN, 20/PACKAGE, BBL NO. 96115 OR EQUAL


description:
SALINE, AMPULES, 26/CASE, API NO. 8886-211260 OR EQUAL


description:
SALMONELLA-SHIGELLA SLT, 20/PKG, REMEL NO. 06-4582 OR EQUAL


description:
SERA-TEK, TREPONEMAL ANTIBODY TEST, MLA KIT, AMES NO. 2910


description:
SER-TEK, U BOTTOM, MICROLITER TRAY, TEST MHA KIT, AMES NO. 3713


description:
SIMMONS CITRATE AGAR SLANT, 10 X 125 MM, 10/PKG


description:
SLANTS, POTASSIUM, NITRATE, ASSIMILATION AGAR, 20 TUBES/BOX


description:
STANDARD METHODS AGAR, 20/PACKAGE, BBL NO. 21030 OR EQUAL


description:
STANDARD METHODS AGAR, 20/PACKAGE, BBL NO. 97030 OR EQUAL


description:
THEOGLYCOLATE WITHOUT INDICATOR, TUBED, 10 ML, 10 X 125 MM, 10/PKG


description:
THIOGEL, REMEL #064668 OR EQUAL - 20/PKG.


description:
TRYPTICASE SOY AGAR, 20/PACKAGE, BBL NO. 21185 OR EQUAL


description:
TYRPTICASE SOY AGAR, 100/CS, REMEL NO. 01-917 OR EQUAL


description:
TRYPTICASE SOY AGAR, PLATED, W/5% SHEEP BLOOD, REMEL NO. 01-200 OR EQUAL, 10/PKG


description:
TRYPTICASE SOY AGAR, PLATED, W/5% SHEEP BLOOD, REMEL NO. 01-201 OR EQUAL, 15/PKG


description:
TRYPTAPHANE 1% SOLUTION ENRICHMENT, 10 X 125 MM, 10/PKG


description:
TYROSINE AGAR, POUR TUBES, 25ML DEEP - 10 TUBES/CS


description:
TYROSINE AGAR, POUR TUBES, 25 ML DEEP, 20 SETS/PKG


description:
TYROSINE AGAR, POUR TUBES, REMEL #099602 OR EQUAL - 20 TUBES/PKG.


description:
UREA AGAR, 100/CS, REMEL NO. 06-5210 OR EQUAL


description:
XANTHINE AGAR, POUR TUBES, 25ML DEEP - 10 TUBES/CS


description:
XANTHINE AGAR, POUR TUBES, REMEL #09794 OR EQUAL - 20 TUBES/PKG.


description:
YERSINIA AGAR, 10/PKG, REMEL NO. 01-998 OR EQUAL


description:
AGAR, V, FOR GARDENALLA ISOLATION, BBL NO. 21874/21875 OR EQUAL, 10/BOX


description:
ANAEROBE BLOOD AGAR, REMEL #01-140 OR EQUAL - 10 PLATES/PKG.


description:
ANAEROBE BLOOD AGAR, WITH KANAMYCIN & VANCOMYCIN (CDC) FORMULA, REMEL #01-042 OR EQUAL - 10 PLATES/PKG.


description:
ANAEROBE BLOOD AGAR, WITH PHENYLETHYL ALCOHOL (CDC) FORMULA, REMEL #01-048 OR EQUAL - 10 PLATES/PKG.


description:
BORDET GENGOU BLOOD AGAR, RUPP & BOWMAN #97876 OR EQUAL - 10 PLATES/PKG.


description:
BORDET GENGOU BLOOD AGAR, WITH METHICILLIN, RUPP & BOWMAN #97877 OR EQUAL - 10 PLATES/PKG.


description:
BUFFERED CHARCOAL YEAST EXTRACT AGAR, WITH POLYMYXIN B, ANISOMYCIN AND CEFAMANDOLE (BYCE W/PAC), RUPP & BOWMAN #97879 OR EQUAL - 10 PLATES/PKG.


description:
CAMPYLOBACTER BLOOD AGAR WITH 5% ANTIMICROBICS AND 10% SHEEP BLOOD - 10 PLATES/CS


description:
CAMPYLOBACTER BLOOD AGAR, WITH 5 ANTIMICROBICS AND 10% SHEEP BLOOD, RUPP & BOWMAN #21728 OR EQUAL - 100 PLATES/CS.


description:
CAMPYLABACTER BLOOD AGAR, WITH 5% ANTIMICROBICS AND 10% SHEEP BLOOD, 20/PKG


description:
CAMPYLABACTER SKIRROW, 20 X 15 MM, 20/PKG


description:
CHOCOLATE AGAR, RUPP & BOWMAN #21267 OR EQUAL  - 100 PLATES/CS.


description:
CHOCOLATE AGAR PLATES W/O BAG AND PILL, 15 MM X 100 MM DISPOSABLE PETRI PLATES, 20 PLATES/PACKAGE


description:
CHOCOLATE AGAR W/HEMOGLOBIN AND ISOVITALEX, 100 X 15 MM, 100/PKG


description:
COLUMBIA CNA AGAR, WITH 5% SHEEP BLOOD, REMEL #01-320 OR EQUAL  - 10 PLATES/PKG


description:
COLUMBIA CNA PLATES, WITH 5% SHEEP BLOOD, 20/PACKAGE, BBL NO. 21352 OR EQUAL


description:
COLUMBIA CNA AGAR, WITH 5% SHEEP BLOOD, REMEL NO. 01-320 OR EQUAL - 20 PLATES/CS


description:
EGG YOLK AGAR, RUPP & BOWMAN #97873 OR EQUAL - 10 PLATES/PKG


description:
HEKTOEN AGAR, REMEL NO. 01-483 OR EQUAL, 10/PKG


description:
HAEMOPHILLUS AGAR PREPARED QUAD PLATE WITH BRAIN HEART INFUSION AGAR AND BLOOD AGAR WITH ISOLATION FACTOR V AND X ADDED, BBL NO. 97890 OR EQUAL, 10/BOX


description:
HEKTOEN AGAR, REMEL #01-483 OR EQUAL - 100 PLATES/CS.


description:
MACCONKEY AGAR, RUPP & BOWMAN #21270 OR EQUAL - 100 PLATES/CS.


description:
MACCONKEY AGAR, 15MM X 100MM - 100 PLATES/CS


description:
MARTIN LEWIS MEDIA WITH BAG AND PILL, 15 MM X 100 MM DISPOSABLE PETRI PLATES, 20 PLATES/PACKAGE


description:
MARTIN LEWIS MEDIA W/O BAG AND PILL, 15 MM X 100 MM DISPOSABLE PETRI PLATES, 20 PLATES/PACKAGE


description:
MUELLER HINTON AGAR, W/BLOOD, 15 MM, 20/PKG


description:
MUELLER HINTON WITH 5% SHEEP BLOOD, 24 X 15 MM, 24/PKG


description:
MUELLER HINTON AGAR, W/BLOOD, 15 MM, 100/PKG


description:
MUELLER HINTON CHOCOLATE, 24 X 15 MM, 24/PKG


description:
NICKERSON AGR (BIGGY AGAR), PREPARED PLATE, BBL NO. 97254 OR EQUAL


description:
PHENYLETHYL AGAR, PLATES WITH 5% SHEEP BLOOD, 20 X 15 MM, 20/PKG


description:
RODAC PLATES, 20/BOX, BBL NO. 21945 OR EQUAL


description:
SABOURAUD'S DEXTROSE AGAR PLATES, 15 MM X 100 MM, STERILE, DOUBLE OR TRIPLE WRAPPED, W/MIN. FILL VOLUME OF 25 ML PER PLATE, PML NO. P8600 OR EQUAL


description:
SABOURAUD'S DEXTROSE AGAR W/LECITHIN AND TWEEN 80 STERILE, ENVIORNMENTAL MONITORING PLATE, DOUBLE OR TRIPLE WRAPPED, 65 MM, FILLED, PML NO. P8100


description:
SALMONELLA, SHIGELLAL AGAR, 20 X 15 MM, 20/PKG


description:
STREP/TSA GROUP A, 5% SHEEP BLOOD, SPLIT PLATE, 20/PACKAGE, BBL NO. 21783 OR EQUAL


description:
THAYER MARTIN AGAR, MODIFIED, 20 X 15 MM, 20/PKG


description:
TRYPTIC SOY AGAR PLATES, 15 MM X 100 MM, STERILE, DOUBLE OR TRIPLE WRAPPED W/MIN. FILL VOLUME OF 25 ML PER PLATE, PML NO. P8750 OR EQUAL


description:
TRYPTIC SOY AGAR W/LECITHIN AND TWEEN 80, ENVIRONMENTAL MONITORING PLATE, SINGLE WRAPPED, 65 MM FILLED, BBL NO. 21288 AND 21287 OR EQUAL


description:
TRYPTIC SOY AGAR W/LECITHIN AND TWEEN 80 STERILE, ENVIRONMENTAL MONITORING PLATE, DOUBLE OR TRIPLE WRAPPED, 65 MM, FILLED, BBL NO. 21961, PML NO. P8150 OR EQUAL


description:
TRYPTICASE SOY AGAR, PLATES WITH 5% SHEEP BLOOD, 20/PKG


description:
TRYPTICASE SOY AGAR WITH 5% HORSE BLOOD, 20 X 15 MM, 20/PKG


description:
TRYPTICASE SOY AGAR PREPARED PLATES WITH 5% SHEEP BLOOD, RUPP & BOWMAN #21261, 100/CS.


description:
ARYLSULFATASE BUTT (AFB 3 DAY TEST), 20/PACKAGE, REMEL NO. 08-026 OR EQUAL


description:
FERRIC AMMONIUM CITRATE 20% (AFB IRON UPTAKE), 25ML, REMEL NO. 21-216 OR EQUAL


description:
LEGONELLA AGAR, REMEL NO. 01-341 OR EQUAL, 10/PKG


description:
MACONKEY W/O CRYSTAL VIOLET (AFB), 10/PKG


description:
MACCONKEY W/O CRYSTAL VIOLET (AFB), 20/PACKAGE, BBL NO. 97349 OR EQUAL


description:
MACCONKEY 11 AGAR W/SORBITOL, 10/PKG, PML P1863 OR EQUAL


description:
MIDDLEBROOK 7H10 PLATE AGAR, 20/PACKAGE, BBL NO. 21174 OR EQUAL


description:
MIDDLEBROOK 12B, 7H12 BROTH MEDIUM, BD NO. 4402004 OR EQUAL


description:
MGIT MYCOBACTERIA GROWTH TUBE, CONTAINING INDICATOR AND BROTH, BBL NO. 4345113 OR EQUAL, 100/BOX


description:
MGIT OADC ENRICHMENT, BBL NO. 4345116 OR EQUAL, 6 VIALS/PKG


description:
MGIT PANTA ANTIBIOTIC MIXTURE, LYOPHILIZED, BBL NO. 4345114 OR EQUAL, 6 VIALS/PKG


description:
13A MYCOBACTERIAL BLOOD CULTURE MEDIUM, B-D NO. 4404 764 OR EQUAL


description:
NIACIN TEST CONTROL FOR T.B., 50 DISKS/BOTTLE, DIFCO NO. 3184-90 OR EQUAL


description:
NIACIN TEST STRIPS FOR T.B., 25 STRIPS/BOTTLE, DIFCO NO. 3182-30 OR EQUAL


description:
NITRATE REAGENT A (AFB), REMEL NO. 21-243 OR EQUAL, 2ML


description:
NITRATE REAGENT B (AFB), REMEL NO. 21-244 OR EQUAL, 2ML


description:
NITRATE SUBSTRATE BROTH (AFB), 20/PACKAGE, REMEL NO. 06-1548 OR EQUAL


description:
POTASSIUM TELLURITE REAGENT FOR T.B. (LIQUID FORM), REMEL NO. 21-254 OR EQUAL


description:
SODIUM CARBONATE 2N FOR ARYLSULFATASE TEST T.B. (LIQUID FORM)


description:
SODIUM CARBONATE 2N FOR ARYLSULFATASE TEST T.B. (LIQUID FORM), REMEL NO. 21, 267, 25 MIL


description:
T.B. HYDROLYSIS REAGENT, 5ML/BOTTLE, DIFCO NO. 3192-56-5 OR EQUAL


description:
T.B. MIDDLEBROOK 7H9 BROTH W/TWEEN, 10/BOX, BBL NO. 97151 OR EQUAL


description:
T.B. MIDDLEBROOK 7H9 BROTH W/TWEEN, CARR SCARBOROUGH NO. 53-1068 OR EQUAL, 12/BOX


description:
TWEEN 80 FOR CATALASE FOR T.B. (LIQUID FORM), REMEL NO. 21-275 OR EQUAL


description:
UREA BROTH (AFB), 1.5ML, 20/PACKAGE, REMEL NO. 06-5222 OR EQUAL


description:
Nutritional Chemicals (Not For Human Use): Carbohydrates, Proteins, Vitamins, etc.


description:
Research Diets, Special Purpose (For Experimental Animals)


description:
CANINE DIET FOOD (LAB.) - PURINA 5006 OR EQUAL


description:
DOG FOOD - 15 OZ./CAN, 48 CANS/CASE - STRONGHEART OR EQUAL


description:
CHICK CHOW, LABORATORY - PURINA S-G 5065 OR EQUAL


description:
AUTOCLAVE CHOW, PURINA NO. 5010 OR EQUAL, 50 LB/BAG


description:
LAB CHOW, PURINA NO. 5001 OR EQUAL, 50 LB/BAG


description:
HIGH PROTEIN MONKEY CHOW - PURINA 5045 OR EQUAL


description:
MONKEY CHOW, PURINA NO. 5037 OR EQUAL, 25 LB/BAG


description:
MONKEY CHOW, PURINA NO. 5047 OR EQUAL, 25 LB/BAG


description:
GUINEA PIG CHOW, PURINA, NO. 5025 OR EQUAL, 50 LB/BAG


description:
MINI PIG CHOW BREEDER/LACTATION - PURINA 5082 OR EQUAL


description:
MINI PIG CHOW GROWER - PURINA 5081 OR EQUAL


description:
MINI PIG CHOW STARTER - PURINA 5080 OR EQUAL


description:
AUTOCLAVABLE RABBIT CHOW - PURINA 5304 OR EQUAL


description:
AUTOCLAVABLE MOUSE CHOW - PURINA 5021 OR EQUAL


description:
AUTOCLAVABLE RODENT CHOW - PURINA 5010 OR EQUAL


description:
CARBOL FUSHIN, KINYOUN, LIQUID, HARLECO NO. 6033X OR EQUAL, 32 OZ/BOTTLE


description:
EOSIN STAIN, POWDER, SIGMA NO. E4382, 25 G/CONTAINER


description:
FLUORESCENT STAIN SET T FOR TB, DIFCO NO. D3325-324 OR EQUAL


description:
GRAM STAIN SET, BBL NO. 12297 OR EQUAL, 250 ML/CONTAINER, 4 CTR./KIT


description:
HEMATEK STAIN, AUTOMATED STAIN PAK, FOR STAINING WHITE BLOOD CELLS FOR DIFFERENTIAL COUNT, AMES NO. SP B4141-1 OR EQUAL, STAINS 1000 SLIDES


description:
HEMATOXYLIN, HARLECO SP S-7735-3 OR EQUAL


description:
JUDIN IV STAIN, SIGMA NO. S4261 OR EQUAL, 25GM POWDER/CONTAINER


description:
METHYLENE BLUE, TB, 6 X 250 ML/BOX, DIFCO 3319-769 OR EQUAL


description:
NEW METHYLENE BLUE N, LIQUID, RETICULOCYTE STAIN, 1 PINT/BOTTLE


description:
PAPANICOLAOU STAIN EA5D, HARLECO OR EQUAL, 32 OZ/BOTTLE


description:
PAPANICOLAOU STAIN OG-6, HARLECO OR EQUAL, 32 OZ/BOTTLE


description:
TB CARBOLFUSCHSIN KF STAIN, DIFCO NO. 332-75 OR EQUAL, 250 ML/CONTAINER, 6 CTR./BOX


description:
TRICHROME WHEATLEY STAIN, 500 ML/BOTTLE, MICROSCAN OR EQUAL


description:
BOATS, MOTORS, AND MARINE AND WILDLIFE SUPPLIES


description:
CENTRIFUGAL, SELF-PRIMING, BELT DRIVEN, 1 CYLINDER, RUNS OFF DIESEL ENGINE


description:
PARTS, GOULD BILGE PUMP (GOULD OR EQUAL)


description:
ADAPTER, FRAME, 7 IN. H X 11 IN. DIA. BASE, FOR 2-7/8 IN. SHAFT, 6-HOLE, FOUR  3/8 IN.  STD. THRD. AND TWO 9/16 IN. SMOOTH, TOP OPENING, 5-5/16 IN. I.D., CASTIRON, FOR MODEL 3196 BILGE PUMP


description:
BOLT, TAP, 3/8 IN. DIA. X 1-3/4 IN. L, ALL THREAD, HEX HEAD, STD., NC, PLATED  W/JAM NUT, IMPELLER ADJ., FOR MODEL 3196 BILGE PUMP


description:
CASING, FOR MODEL 3196 BILGE PUMP, NO. 67868185108


description:
FLANGE, COUPLING, 1-1/8 IN., TYPE 6S, CAST IRON


description:
FLANGE, COUPLING, 1-7/8 IN., TYPE 6S, CAST IRON


description:
FOOT, BEARING, FRAME, 8-1/2 IN. L X 2-1/2 IN. W X 1 IN. THICK, W/THREE 1/2 IN. MTG. HOLES, CAST IRON, FOR MODEL 3196 BILGE PUMP


description:
FOOT, CASING, 11 IN. L X 1/2 IN. THICK, CAST IRON, W/FOUR 1/2 IN. MTG. HOLES,  FOR MODEL 3196 BILGE PUMP


description:
GASKET. BEARING, 11 IN. DIA. X 1-5/16 IN. W, VELLUMOID, 6-HOLE FRAME TO ADAPTER FOR MODEL 3196 BILGE PUMP


description:
GASKET. CASING, 6-1/2 IN. DIA. X 1/4 IN. W, BLUE AFRICAN ASBESTOS, FOR MODEL 3196 BILGE PUMP


description:
O-RING, FOR MODEL 3405 BILGE AND FIRE PUMP, NO. CO2495A296359


description:
O-RING, IMPELLER, 1-1/2 IN. DIA., TEFLON, WHITE, FOR MODEL 3196 BILGE PUMP


description:
PIN, DOWEL, 9/16 IN. DIA. X 1-1/2 IN. L, SOLID STEEL, W/TAPERED CONCAVE END, FRAM TO ADAPTER, FOR MODEL 3196 BILGE PUMP


description:
RING, RETAINER, BEARING HOUSING, STEEL, 4-3/8 IN. DIA., PARTIAL RING W/1-1/2 IN GAP AND TWO END HOLES, FOR MODEL 3196 BILGE PUMP


description:
SHAFT, IMPELLER, FOR MODEL 3405 BILGE AND FIRE PUMP, NO. R77552249


description:
SLEEVE, PUMP SHAFT, 5-11/16 IN. L X 1-3/4 IN. DIA., MONEL, TITANIUM, AND NICKLE1-1/2 IN. I.D. ONE END AND 1 IN. I.D. THE OTHER END, FOR MODEL 3196 BILGE PUMP


description:
Boat Components (Not Otherwise Classified)


description:
STEERING EQUIP., PARTS AND ACCESSORIES - BOAT


description:
COIL, STEERING, 115/120 VOLT, 0.2 AMP, FOR DIRECTIONAL VALVE


description:
SEAL KIT, CYLINDER, 2 IN.O.D. HYDRAULIC, CONSISTS OF RING 2 IN.O.D. X 1-7/8 IN.I.D., SEALS, AND PACKING ROD O-RINGS, J.M. VOITH NO. S55044050046N OR EQUAL


description:
VALVE, CONTROL, 1/2 IN. PORTS, RANGE 35-125 P.S.I., FOR STEERING BRAKE SYSTEM  ON FERRY


description:
VALVE, CONTROL, 1/2 IN. PORT HOLES, RANGE 250-1000 P.S.I., FOR STEERING BRAKE SYSTEM  ON FERRY


description:
VALVE, CONTROL, 3/4 IN., RACINE, PRESSURE, FNPT, FOR MODEL FEI-SBDH-D54S, MOTION IND. NO. 987212 OR EQUAL


description:
CONTROLS AND PARTS, BOAT RAMP, HYDRAULIC


description:
VALVE, DIRECTIONAL, 10 IN. L X 9 IN. H X 5 IN. W, CAST IRON, ROTH NO. 4WEH22E706AW12060NDAV OR EQUAL


description:
FERRY BOAT MAJOR COMPONENTS AND PARTS (NOT OTHERWISE CLASSIFIED)


description:
BOX, BELL, 4-1/2 IN. W X 4-1/2 IN. L X 2-1/2 IN. THICK, STEEL, FOR GENERAL ALARM VIBRATING BELLS, TEXAS MARINE SPLY. NO. WB OR EQUAL


description:
COIL ASSY., VIBRATING, 12 VDC, GONG, 4 IN. L X 4 IN. W X 2 IN. THICK, STEEL, FOR GENERAL ALARM BELLS, TEXAS MARINE SPLY. NO. 6000121 OR EQUAL


description:
CONTACTOR, BY PASS, RATED @ 2500 AMPS, 1000 VDC, 125 VDC COIL, AUX. CONTACTS, MANUAL INTERLOCK OVERDRIVE, 30 IN. W X 21 IN. D X 17 IN. H, FOR PROPULSION SYSTEM, G.E. NO. 1C2810AY13062 OR EQUAL


description:
DOME, BELL, 10 IN. DIA. X 2 IN. WOR THICK, STEEL, FOR GENERAL ALARM BELLS, TEXAS MARINE SPLY. NO. A10 OR EQUAL


description:
HOUSING, TURBINE, 5-1/4 IN. L X 3-3/8 IN. W, ALUMINUM ALLOY, FOR AIR STARTER, MAGNATECH NO. 22634 OR EQUAL


description:
MODULE, OUTPUT, 32 POINT PLUG-IN, 24 VDC, NEGATIVE LOGIC, 2 IN. H X 5-1/2 IN. W X 5-1/2 IN. L, GEC NO. IC693MDL752TTL OR EQUAL (FOR MARINE ENGINE ROOM ALARM SYSTEM)


description:
O-RING, AIR STARTER, 3/8 IN.O.D. X 1/4 IN.I.D. X 1/16 IN. THICK, ENPRO NO. 990001010 OR EQUAL


description:
O-RING, AIR STARTER, 3/4 IN.O.D. X 5/8 IN.I.D. X 1/16 IN. THICK, ENPRO NO. 990001016 OR EQUAL


description:
O-RING, CONTROL VALVE, 1-3/4 IN. O.D. X 1-1/2 IN. I.D. X 1/8 IN. THICK, NEOPRENE, VICKERS NO. 262402 OR EQUAL


description:
POWER SUPPLY, ENGINE ROOM ALARM SYSTEM, 30 WATT, 24/48 VDC, 5-1/8 IN. W X 2-1/2 IN. H X 5 IN. D, GEC NO. 1C693PWR322D OR EQUAL


description:
REGULATOR, AIR, 7 IN. X 3-1/2 IN. W, 1/2 IN. INLET/OUTLET NPT, STEEL W/O BOWL, 250 PSI MAX., 90 CPM, HEAVY DUTY INDUSTRIAL, FOR AIR CONTROL THROTTLE, GRAINGER NO. 1Z885C OR EQUAL


description:
REGULATOR, AIR, 10 IN. X 3-1/2 IN. W, 3/8 IN. INLET/OUTLET NPT, STEEL W/POLYCARBONATE BOWL, 150 PSI MAX., 78 CPM, PIGGYBACK FILTER/REGULATOR, FOR AIR CONTROL THROTTLE, GRAINGER NO. 4Z028A OR EQUAL


description:
REPAIR KIT, AIR STARTER, INCLS. ASST. O-RINGS, BEARINGS, SEALS, GREASE, AND LUBE, MAGNATECH NO. 42002 OR EQUAL


description:
ROD, PLUNGER, AIR STARTER, 2-1/2 IN. L X 3/8 IN. DIA., BAKELITE PLASTIC, ENPRO NO. 221927 OR EQUAL


description:
SEAL KIT, VALVE CONTROL, 40 PIECE KIT INCLUDES 6 PAPER GASKETS AND 34 ASST. NEOPRENE O-RINGS, VICKERS NO. 919113 OR EQUAL


description:
SEAT, AIR VALVE, AIR STARTER, 5/8 IN. DIA. X 1/16 IN. THICK, ALUMINUM, ENPRO NO. 221929 OR EQUAL


description:
SHAFT, TAIL, 10.250 IN. X 29 FT., ABS GR.2, STEEL, W/STAINLESS STEEL JOURNALS  AND TAPERS, AREA BETWEEN JOURNALS COATED W/9 LAYERS OF CLOTH AND RESIN,  ABS NO.AB92HS56481867 OR EQUAL


description:
SPACER, NOZZLE, 5-1/4 IN. DIA. X 1-1/2 IN. THICK STEEL,RIGHT HAND, NORMAL PRESSURE, FOR TURBINE SERIES MODEL 42K TDI AIR STARTER, MAGNETECH SPEC. NO. 2P2267301 OR EQUAL


description:
SPRING, PLUNGER RESET, 1 IN. L X 3/8 IN. DIA., STEEL, ENPRO NO. 990408008 OR EQUAL


description:
SPRING, SPOOL CENTER, 1-3/8 IN. W X 2 IN. H, STEEL, VICKERS NO. 279497 OR EQUAL


description:
VALVE, BALL, 1-1/2 IN., STAINLESS STEEL, 4-1/2 IN. L X 2-1/4 IN. DIA., W/ 1-1/2 IN. NPT I.D., FOR FUEL CONNECTIONS TO MARINE FERRIES AND LANDINGS


description:
VALVE, DIRECTIONAL, 10 IN. L X 40-1/2 IN. W X 8 IN. H, 30 LBS., SOLENOID CONTROLLED, CAST IRON HOUSING, FOR HYD. STEERING SYS., VICKERS NO. DG5S80CETMFWB530 OR EQUAL


description:
VALVE, PRESSURE RELIEF, 3/4 IN., BRONZE, 225 P.S.I., 8 IN. H X 3 IN. W X 2-1/4 IN. D, FOR MAIN AIR TANKS ON FERRY


description:
BUOYS, MARKER, INCL. PARTS AND ACCESSORIES


description:
BUOY, NUN, SHALLOW WATER, 14 IN. X 30 IN., ROYLAN NO. B1428NGW OR EQUAL


description:
BUOY, NUN, SHALLOW WATER, WITH LIGHT, 14 IN. X 30 IN., ROYLAN NO. B1428NSWL  OR EQUAL


description:
BUOY, SHALLOW WATER CAN, 14 IN. X 30 IN., ROYLAN NO. B1428SW OR EQUAL


description:
BUOY, SHALLOW WATER CAN, W/LIGHT, 14 IN. X 30 IN., ROYLAN NO. B1428SWL OR EQUAL


description:
BUOY, SPAR TYPE, A.B.S., 9 IN. X 61 IN., ROYLAN NO. B1147R OR EQUAL


description:
BUOY, SPAR TYPE, EXTRA HEAVY DUTY, W/PICKUP EYE, 9 IN. X 61 IN., ROYLAN NO. B961R OR EQUAL


description:
FLOAT, BARRIER, 18 IN. X 30 IN., ROYLAN NO. B1830BO OR EQUAL


description:
VINYL WRAPPER W/BAND, MESSAGE AND EMBLEM, ROYLAN NO. B293-9B OR EQUAL


description:
Camels (Structure to Lift Submerged Vessels)


description:
Chiller, Water, Large Flow Capacity (To Chill Hatchery Water)


description:
Docks and Piers, Fixed and Floating (Including Dock Systems, Gangways, etc.)


description:
DOCKS, FLOATING, INCL. PARTS AND ACCESSORIES


description:
DOCK, FLOATING, .5 X .5 METERS, POLYVINYL, 19.75 IN. X 19.875 IN. SURFACE AREA, 10 IN. DEEP, 8.5 IN. FREEBOARD AREA, 5/16 IN. THICK, 135 LB. BUOYANCY, JET FLOAT OR EQUAL


description:
ADAPTER, MALE, 2 IN., TYPE F, MALE NPT, BRASS, 2-7/16 IN.O.D. X 3-1/2 IN.O.L., FOR SEWER CONNECTIONS ON WORK DOCKS


description:
ADAPTER, MALE, 4 IN., TYPE F, MALE NPT, BRASS, 4-3/4 IN.O.D. X 5-1/8 IN.O.L., FOR SEWER CONNECTIONS ON WORK DOCKS


description:
COUPLER, FEMALE, 2 IN., TYPE B, BRASS, 3 IN. O.D. X 3-1/2 IN.O.L., W/RETAINING RINGS TO HOLD ADAPTERS ON SEWER CONNECTIONS ON WORK DOCKS


description:
COUPLER, FEMALE, 4 IN., TYPE B, BRASS, 5-1/2 IN.O.D. X 3-7/8 IN.O.L., W/RETAINING CLIPS, FOR MALE ADAPTERS ON SEWER CONNECTIONS ON WORK DOCKS


description:
Electrical Accessories and Parts, Marine


description:
BEARING, BALL, 4-1/2 IN.O.D. X 2 IN.I.D. X 1 IN. W, ENCLOSED, STEEL, FOR 150KW ALTERNATOR, SKF NO. 63102RS1 OR EQUAL


description:
ROTOR, MARINE, 8 IN. O.D. X 1-7/8 IN. I.D. X 8 IN. H, COPPER AND STEEL, FOR 150KW ALTERNATOR, ROBERT C. LANIER NO. 86104 OR EQUAL


description:
STATOR, MARINE, 14 IN. O.D. X 8-1/2 IN. I.D. X 6-1/2 IN. H, COPPER WIRE AND STEEL, 150KW ALTERNATOR, ROBERT C. LANIER NO. 82116 OR EQUAL


description:
ARMATURE, GENERATOR, 420X-900KW DC, 900 RPM W/ARMATURE COILS AND ONE SET OF EQUALIZER COILS, GEC NO. 5CD28D33D006334 OR EQUAL


description:
BELT, TIMING, 109 IN. L X 1-3/4 IN. W X 3/8 IN. THICK, RUBBER, FOR AUX. 40KW GENERATOR, WOODS NO. 280014M42W OR EQUAL


description:
BRUSH, CARBON, MARINE, FLUTED, 3-3/16 IN. L X 1-1/4 IN. W X 1 IN. THICK


description:
COIL, MAGNETIC PICKUP FOR SPEED CONTROL, DYNALCO NO. M-131 OR EQUAL


description:
GASKET, EXHAUST, 12 IN. L X 2-1/2 IN. W X 1/16 IN. THICK, STEEL AND GARLOX, DETROIT NO. 5120224 OR EQUAL


description:
GAUGE, OIL PRESSURE, 0-100 PSI, 2 IN. FACE X 3 IN. DIA., STEEL AND GLASS


description:
HOOP, TURBINE, 5-3/8 IN.I.D., 3/4 IN. SHAFT, SOLID ALUMINUM WHEEL, INCLS. KEYWAY, SPACER, AND CAP SCREW, MAGNATECH SPECIALTY CO. NO. 52084 OR EQUAL


description:
O-RING, RUBBER, 4-1/2 IN. DIA. X 1/16 IN. THICK, TDI AIR STARTER, USED ON SHIP SERVICE GENERATORS, TECH-DEV. NO. 90001046 OR EQUAL


description:
RECTIFIER, ALTERNATOR, 6-3/4 IN.O.D. X 1-7/8 IN.I.D. X 1/4 IN. THICK, BAKELITE AND STEEL, FOR 150KW UNIT, DETROIT NO. 52503 OR EQUAL


description:
REPAIR KIT, SOLENOID VALVE, CONSISTS OF 1 BODY GASKET, DIAPHRAGM ASSY., SOLENOID BASE GASKET, CORE SPRING, CORE ASSY., AND SOLENOID BASE SUB-ASSY., AUTOMATIC SWITCH CO. NO. 302373 OR EQUAL


description:
RETAINER, SPRING, CLIP STYLE, ANODIZED BLACK METAL, FOR GM 8-71 GENERATOR, DETROIT NO. 8031925 OR EQUAL


description:
VALVE, AIR STARTER, 3-WAY, 2-1/2 IN. W X 2-3/4 IN. L, STEEL, 0-150 P.S.I., VERSA PRODUCTS NO. ESM33013424VDC OR EQUAL


description:
WHEEL, GENERATOR BLOWER, GIBB GILCHRIST NO. 881AF-1, 280-420F-1299-1 OR EQUAL


description:
WHEEL, GENERATOR BLOWER, GIBB GILCHRIST NO. 881AF-2, 280-420F-1299-1 OR EQUAL


description:
PARTS AND ACCESSORIES, SERVICE GENERATOR


description:
CAP, RADIATOR, 7 LB., 3 IN. L X 2-1/4 IN. W X 1 IN. THICK, FOR 8V92 GENERATOR, DETROIT NO. 6410879 OR EQUAL


description:
COVER, VALVE, CAST ALUMINUM W/OIL FILL NECK, CHEVROLET NO. 5103591 OR EQUAL


description:
COVER, VALVE, CAST ALUMINUM W/OIL FILL NECK, CHEVROLET NO. 5103641 OR EQUAL


description:
ISOLATOR, VIBRATION, MTG. ASSY., STEEL AND NEOPRENE, FOR 3/16 IN. SHAFT SIZE


description:
INSULATOR, VOLTAGE, STUD MOUNT, 4-3/4 IN. L X 4-3/4 IN. W X 3 IN. D, STEEL AND FIBERGLASS, F/540KW MARINE GENERATOR


description:
PLATE, WEAR, W/CAM, FOR JABSCO PUMP ON SERVICE GENERATOR - 2/SET,  JABSCO NO.  5196696 OR EQUAL


description:
PUMP KIT, 6 PIECE, CONSISTING OF ONE CAST IRON FRAME, 3-1/2 IN. SQUARE, TWO 1/4 IN. STEEL PLUGS, ONE 1/2 IN. X 3/8 IN. STEEL BUSHING, ONE 3/8 IN. BRASS FERRULE ADAPTER, ONE 3-1/2 IN. OD X 2 IN. ID X 1/16 IN. THICK GARLOX GASKET, DETROIT NO. 199560 OR EQUAL


description:
SEAL, OIL, STJ, CAMSHAFT, FOR SHIP SERVICE GENERATOR, DETROIT NO. 5106223 OR EQUAL


description:
SEAL, OIL, STJ, FOR RAW WATER PUMP FOR MODEL 2-71 EMERGENCY GENERATOR


description:
SEAL, THERMOSTAT, 2-5/8 IN. O.D. X 2 IN. I.D. X 3/16 IN. THICK, BRASS/NEOPRENE, DETROIT NO. 5132155 OR EQUAL


description:
SWITCH, PRESSURE, 5 P.S.I., 3-1/2 IN. L X 1-5/8 IN. W X 1-5/8 IN. H, STEEL, DETROIT NO. 23511816 OR EQUAL


description:
SWITCH, TEMPERATURE ALARM, 190 DEGREE, 4 IN. L X 1-1/4 IN. D, W/ 3/8 IN. NPT FITTING MADE OF BRASS AND STEEL


description:
SWITCH, TEMPERATURE, HI-TEMP PROTECTION CUT-OFF, 3 IN. L X 1 IN. W X 1 IN. H, STEEL, DETROIT NO. 5146080 OR EQUAL


description:
VALVE, SOLENOID, 3-1/4 IN. L X 2-1/4 IN. W X 3-3/4 IN. H, BRASS AND STEEL, 12VDC, 11.6 WATT, U.L. LISTED 104R, 3-WIRES (2 RED, 1 GREEN)


description:
VALVE COVER KIT, FOR INSTALLATION ON MODEL 8-71 MOTOR ON GENERATOR, CHEVROLET  NO. 5149511 OR EQUAL


description:
PARTS AND ACCESS., ELECTRICAL, MARINE (MISC.)


description:
AMP METER, DC AMP, 0-30 AMP, G.E. NO. 50250300 NLNL OR EQUAL


description:
AMP METER, DC AMP, 30/0/30, G.E. NO. 50254301NLNL OR EQUAL


description:
AMP METER, DC AMP, 0-60 AMP, G.E. NO. 8DB18AEH2 OR EQUAL OR EQUAL


description:
BLOWER, FAN, 115 VAC, 1.1 AMP, 150 RPM, FLANGE MOUNT, 9 IN. H X 8-3/4 IN. W X 7-5/8 IN. D, PLASTIC HOUSING AND FAN BLADE, GRAINGER NO. 4C818 OR EQUAL


description:
COIL, COMMUTATING, 375 KW, 2200 AMP, ALUMINUM, INTERPOLE COIL


description:
COIL KIT, STARTER, 120 VOLT, 60 HZ, 1-1/2 IN. X 1-1/4 IN. X 7/8 IN., BAKELITE AND COPPER, SIEMENS NO. 3TX74030AK6 OR EQUAL


description:
CONTACT KIT, AUXILIARY, NEMA 0-5, FOR AC SWITCHBOARD,  G.E. NO. CR305X100E  OR EQUAL


description:
CONTACT KIT, STARTER, 3 SETS OF CONTACTS, 2 AT 1-3/8 IN. X 3/8 IN. X 1/16 IN. AND 1 AT 2 IN. L X 3/8 IN. W X 1/16 IN. THICK, BRASS CONTACT W/STEEL SET SCREW, SIEMENS NO. 3TY64400A OR EQUAL


description:
CONVERTER, POWER SUPPLY, FROM 120 VOLT DC/24 VOLT DC AT 10 AMP, FOR RATHEONNO 6410 RADAR


description:
COIL, TACHOMETER, MAIN ENGINES, DYNALCO NO. M-102 OR EQUAL


description:
RELAY, CONTROL, 3 POLE, 10 AMP, 120 VOLT, 50-60 HZ, DOUBLE THROW


description:
RELAY CONTROL, 10 AMP, 120 VAC, 50/60 HZ, PROPULSION


description:
RELAY, STARTER OVERLOAD, 6.3 TO 10.0 AMP, 3 IN. X 4 IN. X 1-3/4 IN., BAKELITE AND BRASS, SIEMENS NO. 3UA54001J OR EQUAL


description:
RESISTOR, RHEOSTAT, 2500 OHMS, 12.5 WATT


description:
SEATER, BRUSH, 4-3/4 IN. X 1-1/8 IN. X 5/8 IN. THICK, GR. SOFT FOR SEATING AND POLISHING BRUSHES ON COMMUTATOR


description:
SOCKET, LAMP, 250VAC, MED. BASE, 2 HOLE, PORCELAIN AND ALUMINUM, 2 IN. X 2 IN. X 2 IN., LEV NO. 19062 OR EQUAL


description:
STARTER, AIR, RIGHT HAND ROTATION, MODEL 52R, FOR EMD DIESEL ENGINES, DETROIT  NO. 5248512RH OR EQUAL


description:
SWITCH, AUX. CONTACT, 600 VAC MAX., 250 VDC MAX, SERIES A-DW


description:
SWITCH, HEATER, STACK SWITCH, 110V, 60HZ, 1 PHASE


description:
SWITCH, RHEOSTAT TYPE, 3 IN. RING, 250 OHN, 100 WATT


description:
TRANSFORMER, CONTROL, .150KVA, 2-3/8 IN. DEEP, 5 IN. L X 4-1/2 IN. W, W/METAL COVER, 7 LB., FOR BLOWER CONTROL PANEL ON G.E. PROPULSION MOTOR,  G.E. NO. 9T58B2805 OR EQUAL


description:
VOLT METER, 0/150 VDC, W/SCALE FOR 30KW AND 50 KW GENERATORS


description:
VOLT METER, 600-0-600 VDC, FOR PROPULSION CONTROL


description:
Fish and Marine Life Incubators, Accessories and Related Equipment


description:
6 GALLON (FOR BARGE OR OUTBOARD MOTOR BOAT)


description:
PARTS AND ACCESSORIES, MARINE SAFETY GATE


description:
CAP, CYLINDER, HYDRAULIC, 3 IN. BORE FOR CLASS 1 IN. ROD, 4 IN. SQUARE X 3 IN. LONG, CAST IRON, FOR NOPAK HYDRAULIC CYLINDER


description:
CLEVIS, PISTON ROD, YOKE DESIGN, 4 IN. L X 2-1/4 IN. W, 1 IN. I.D. HOSE AT YOKE END, 1-1/2 IN. THREADED HOLE IN SOLID END, CAST IRON


description:
CLEVIS, PISTON ROD, YOKE DESIGN, 4-1/8 IN. L X 2 IN. W X 2 IN., 1 IN.I.D. HOLE AT YOKE END AND 1 IN. THREADED HOLE IN SOLID END, CAST IRON, FOR HYDRAYLIC CYLINDER ON SAFETY GATE


description:
COUPLING, HUB, SHAFT SIZE 1-11/16 IN., GEAR END 3-1/2 IN., TAPERED END 2-1/2 IN., STEEL, FOR PUMP


description:
CYLINDER, HYDRAULIC, 4 IN. X 4 IN. X 30 IN. L, STEEL, FOR HYDRAULIC RAM W/18 IN. STROKE, 1-1/2 IN. ROD, 3-1/2 IN. BORE, AUTOMATIC SWITCH CO. NO. 3518 OR EQUAL


description:
END, ROD, HYDRAULIC, 5-1/2 IN. L X 2-3/4 IN. W, WITH 1-1/4 IN. SELF-ALIGNING, STEEL, 12 THREADS PER INCH, SEALMASTER NO. TR16N OR EQUAL


description:
FILTER ASSY., HYDRAULIC, 4 IN. W X 4 IN. L X 7 IN. H W/FILTER (80-10/2) AND 0-30 LBS. 1-1/2 IN. PRESSURE GAUGE, STEEL, AUTOMATIC SWITCH CO. NO. MF80G10M1-1.7/5.1 OR EQUAL


description:
KEY, ROTOR, 3/4 IN. X 1/8 IN., STAINLESS STEEL, DOWEL, FOR HYDRAULIC PUMP ON SAFETY GATE


description:
PACKING, CYLINDER, 1-3/4 IN.O.D. X 1 IN.I.D. X 1 IN. THICK, NEOPRENE AND RUBBER, NOPAK NO. 259NES4A OR EQUAL


description:
PACKING, GLAND, 1-3/4 IN.O.D. X 1 IN.I.D. X 3/4 IN. THICK, STEEL, NOPAK NO. 1384G73 OR EQUAL


description:
PISTON, CYLINDER, 3-1/2 IN. DIA. X 1-3/4 IN. THICK, ALUMINUM W/1-1/2 IN. HOLE FOR CYLINDER ROD


description:
RELAY, CONTROL, 3-3/4 IN. L X 1-3/4 IN. W X 1-3/4 IN. D, BAKELITE AND STEEL, 120 VOLT, POTTER-BRUMFIELD NO. CNM5 OR EQUAL


description:
RETAINER, SEAL, 1 IN., ALUMINUM, FOR VALVE SPOOL


description:
ROD, PISTON, 3-1/2 IN. BORE, 1-1/2 IN. ROD DIA. X 14 IN. STROKE, CHROME PLATED,FOR HYD. CYL. ON SAFETY GATES


description:
SEAL KIT, PUMP, GEROTOR NO. AA-H8-P-10B3 OR EQUAL


description:
SHAFT, PUMP, 8-1/2 IN. X 3/4 IN., STAINLESS STEEL, FOR SAFETY GATE


description:
SPIDER, RUBBER, 1-5/8 IN. X 5/8 IN. THICK, NEOPRENE, FOR HYDRAULIC PUMPS ON SAFETY GATES, BNG NO. JS5N OR EQUAL


description:
SPOOL, VALVE, STEEL, 1 IN. DIA., SPRING-VALVE SPOOL


description:
VALVE, CONTROL, 4-WAY HYDRAULIC, 1/2 IN. PORTS, OPEN SPOOL, CVA-200 OR EQUAL


description:
VALVE, PILOT, 8 IN. L X 3-1/2 IN. H X 2 IN. W, CAST IRON, VICTOR NO. DG4V3S2CMFWB560 OR EQUAL


description:
COMPOUND, 2-1/2 IN., 30-0-15, LIQUID FILLED, 1/4 IN. MPT B/M, STAINLESS STEEL  CASE, FOR MAIN ENGINE FUEL SYSTEM


description:
PRESSURE, 2-1/2 IN. DIAL, 0-15 P.S.I., LIQUID FILLED, 1/4 IN. MPT METRIC CASE, SIZE 64MM, TYPE 1008


description:
PRESSURE, 2-1/2 IN., 30 P.S.I., LIQUID FILLED


description:
PRESSURE, 2-1/2 IN., 60 P.S.I., LIQUID FILLED


description:
PRESSURE, 2-1/2 IN., 100 P.S.I., LIQUID FILLED


description:
PRESSURE, 2-1/2 IN., 200 P.S.I., LIQUID FILLED


description:
PRESSURE, 2-1/2 IN., 0-3000 P.S.I., LIQUID FILLED, 1/4 IN. NPT


description:
PRESSURE, 4 IN., 60 P.S.I., LIQUID FILLED


description:
PRESSURE, 4.5 IN. DIA. FACE, 0-30 P.S.I., LIQUID FILLED, 1 LB. INCREMENTS, 1/4 IN. NPT BOTTOM MALE CONNECTOR, TURRET CASE, S.S. TUBE


description:
PRESSURE, 4-1/2 IN., 0-60 PSI, LIQUID FILLED, 5 IN. W X 7 IN. H, 3-1/2 IN. DIA.


description:
PRESSURE, 4-1/2 IN., 0-300 P.S.I., 1/4 IN. BOTTOM MT.


description:
PRESSURE, AIR, 0-300 P.S.I., 4-1/2 IN. FACE, PHOSPHOR-BRONZE, 5 LB SUB-DIVISION


description:
PRESSURE, FOR FIRE PUMP, 4-1/2 IN., 200 P.S.I..


description:
PRESSURE, LUBE OIL, 0-200 P.S.I., 4-1/2 IN. FACE, PHOSPHOR-BRONZE, 2 LB. SUB-DIVISION


description:
PRESSURE, SALTWATER, 0-30 P.S.I., 4-1/2 IN. FACE, STAINLESS STEEL, 2 LB. SUB-DIVISION


description:
PRESSURE, WATER JACKET, 0-60 P.S.I., 4-1/2 IN. FACE, STAINLESS STEEL, 1 LB. SUB-DIVISION


description:
PRESSURE AND VACUUM, 0-100 PSI, F/AIR SYSTEM, 2-3/8 IN. W X 2 IN. DIAMETER DIAL, 1/4 IN. BACK CONNECTION, W/POLYPROPYLENE CASE


description:
PRESSURE, 0-100 P.S.I., GENERAL PANEL MOUNT, 3-1/2 IN. DIA. FACE, 1/4 IN. BACK MNPT FITTING, 3-HOLE MOUNT, 2 LB. INCREMENTS, STEEL CASING, AMETEK NO. P845FF-100PSI OR EQUAL


description:
PRESSURE, 0-200 P.S.I., GENERAL PANEL MOUNT, 3-1/2 IN. DIA. FACE, 1/4 IN. BACK MNPT FITTING, 3-HOLE MOUNT, 5 LB. INCREMENTS, STEEL CASING, AMETEK NO. P845FF-200PSI OR EQUAL


description:
PRESSURE, 0-300 P.S.I., GENERAL PANEL MOUNT, 3-1/2 IN. DIA. FACE, 1/4 IN. BACK MNPT FITTING, 3-HOLE MOUNT, 5 LB. INCREMENTS, STEEL CASING, AMETEK NO. P845FF-300PSI OR EQUAL


description:
TEMPERATURE, 1-3/4 IN. DIAL, 100-220 DEG. F, STEEL AND GLASS


description:
Hardware, Fittings, Parts, and Supplies, Boat (Except Spark Plugs)


description:
ALARM SYSTEMS, PARTS, AND COMPONENTS, MARINE FERRY ENGINE ROOM


description:
ANALOG INPUT, 5 IN. L X 5 IN. W X 1-1/2 IN. T, 24VDC, F/GE FANUC SERIES 90-30 ENGINE ROOM ALARM SYSTEM, GEC NO. IC693ALG221 OR EQUAL


description:
MODULE, CPU, 5 IN. L X 5 IN. W X 1-1/2 IN. T, 24VDC, F/GE FANUC SERIES 90-30 ENGINE ROOM ALARM SYSTEM, GEC NO. IC693CPU331 OR EQUAL


description:
COMMUNICATION CONTROL, 5 IN. L X 5 IN. W X 1-1/2 IN. T, 24VDC, F/GE FANUC SERIES 90-30 ENGINE ROOM ALARM BOARD, GEC NO. IC693CPU311 OR EQUAL


description:
DISPLAY COPROCESSOR, 5 IN. L X 5 IN. W X 1-1/2 IN. T, 24VDC, F/GE FANUC SERIES 90-30 ENGINE ROOM ALARM BOARD, GEC NO. IC693ADC311 OR EQUAL


description:
INPUT MODULE, 5 IN. L X 5 IN. W X 1-1/2 IN. T, 24VDC, F/GE FANUC SERIES 90-30 ENGINE ROOM ALARM BOARD, GEC NO. HE693THM806 OR EQUAL


description:
INPUT MODULE, 16 PT, 5 IN. L X 5 IN. W X 1-1/2 IN. T, 24VDC, F/GE FANUC SERIES 90-30 ENGINE ROOM ALARM BOARD, GEC NO. IC693MDL645 OR EQUAL


description:
INPUT MODULE, 32 PT, 5 IN. L X 5 IN. W X 1-1/2 IN. T, 24VDC, F/GE FANUC SERIES 90-30 ENGINE ROOM ALARM BOARD, GEC NO. IC693MDL655 OR EQUAL


description:
INPUT MODULE, RT, 5 IN. L X 5 IN. W X 1-1/2 IN. T, 24VDC, F/GE FANUC SERIES 90-30 ENGINE ROOM ALARM BOARD, GEC NO. HE693RTD600 OR EQUAL


description:
SLOT BASE REMOTE, 10-3/8 IN. L X 5 IN. W X 3/4 IN. T, 24VDC, F/GE FANUC SERIES 90-30 ENGINE ROOM ALARM BOARD, GEC NO. IC693CHS399 OR EQUAL


description:
SLOT BASE REMOTE (10), 17-1/2 IN. L X 5 IN. W X 3/4 IN. T, 24VDC, F/GE FANUC SERIES 90-30 ENGINE ROOM ALARM BOARD, GEC NO. IC693CHS393 OR EQUAL


description:
TRANSDUCER, PRESSURE, 0-100 P.S.I., 3 IN. L X 2 IN. DIA., 1/8 IN. NPT INLET, 1/2 IN. NPT OUTLET, OMG NO. PX410100SI OR EQUAL


description:
TRANSDUCER, PRESSURE, 0-500 P.S.I., 3 IN. L X 2 IN. DIA., 1/8 IN. NPT INLET, 1/2 IN. NPT OUTLET, STEEL, OMG NO. PX410500SI OR EQUAL


description:
CAPS, DUST, FOR SEWAGE AND WATER CONNECTIONS ON MARINE FERRIES


description:
2-1/2 IN.I.D. X 3-1/2 IN.O.D., BRASS AND ALUMINUM, CAM-LOK NO. 634B250A OR EQUAL


description:
4-3/8 IN. I.D. X 5-3/8 IN. O.D. X 2-1/4 IN. T, ALUMINUM, W/BRASS CLIPS


description:
ADAPTER, FEMALE, 2 IN., TYPE C, BRASS, W/HOSE SHANK CAM-LOCK FITTINGS


description:
ADAPTER, MALE, 2 IN., TYPE E, BRASS, W/HOSE SHANK CAM-LOCK FITTINGS


description:
ADAPTER, MALE, 2 IN., TYPE A, BRASS, W/FEMALE NPT CAM-LOCK FITTINGS


description:
BOLT, CRANKSHAFT, FOR SPROCKET ON COOPER MODEL JS6T ENGINE, COOPER NO. JS23C OREQUAL


description:
BOLT, CRANKSHAFT, FOR SPROCKET CLAMP RING ON COOPER MODEL JS6T ENGINE, COOPER  NO. JS2E OR EQUAL


description:
BOLT, ISOLATOR, VALVE COVER, RUBBER, SHIP SERVICE GENERATOR, GMC NO. 5104515 OR EQUAL


description:
CAP, DUST, 1 IN., TYPE DC, ALUMINUM CAM-LOK FITTINGS


description:
CLIP, SAFETY, 2-1/2 IN. L X 5/8 IN. W X 1/16 IN. T, STEEL


description:
COUPLER, FEMALE, 2 IN., TYPE D, BRASS, W/FEMALE NPT CAM-LOCK FITTINGS


description:
COUPLER, FEMALE, 4 IN., 4-3/4 IN. I.D. X 5 IN. O.D. X 3-3/4 IN. L, TYPE D, BRASS, W/FEMALE NPT


description:
COUPLING, CAM-LOCK, 2 IN. MALE X 2 IN. FEMALE NPT, DRY DISCONNECT, STAINLESS STEEL, QUICK SHUT-OFF VALVE FOR FUEL


description:
COUPLING, HOSE, 1/2 IN., HIGH FLOW, FEMALE THREAD, PUSH-PULL, MILTON NO. 1858 OR EQUAL


description:
COUPLING, HOSE, 1-1/2 IN., QUICK ACTING, TRIPLE CONNECTOR, UNIVERSAL STYLE


description:
COUPLING, FLEX. HOSE, 5-1/4 IN. L X 1 IN. W, RUBBER FLEX HOSE W/GALV. STEEL ENDS, GUARDIAN NO. M1711 OR EQUAL


description:
COUPLING, HUB, 7/8 IN. DRIVE. 3 IN.O.D. X 7/8 IN.I.D., 2 IN. H, STEEL, VOITH NO. 1040T78 OR EQUAL


description:
COUPLING, HUB, 1-5/8 IN. DRIVE. 3 IN.O.D. X 1-5/8 IN.I.D., 2 IN. H, STEEL, VOITH NO. 1040T158 OR EQUAL


description:
COUPLING, SCREW, 1-3/4 IN. L X 1 IN. W, STEEL, HEX, INCLS. CHAIN TO ATTACH TO VALVE, FOR HYDRAULIC SYSTEM OF THROTTLE VALVE ON STEERING SYSTEM, VOITH NO. 3214020 OR EQUAL


description:
COUPLING, SHAFT, 7/8 IN. OVERALL DIA. X 1-1/4 IN. L, 1/4 IN. I.D. ONE END, 3/8 IN. I.D. OTHER END, FLEX STEEL, GIBB GILCHRIST NO. 1887158120 OR EQUAL


description:
COVER, HUB GRID, 4-1/2 IN.O.D. X 2-3/8 IN.I.D. X 2-1/2 IN.H, STEEL, FOR HUBS ON STEERING PUMP MOTOR, VOITH NO. 1040T10 OR EQUAL


description:
ELBOW, INTAKE, COOPER NO. FV-18-2T OR EQUAL


description:
ELBOW, INTAKE, COOPER NO. JS-18-9F OR EQUAL


description:
ELBOW, PIPE, 2 IN., 90 DEG. LONG RAD., CARBON STEEL, WPB, EXTRA HEAVY, FOR WELDING


description:
ELBOW, PIPE, 2-1/2 IN., 90 DEG. LONG RAD., CARBON STEEL, WPB, EXTRA HEAVY, FOR WELDING


description:
ELBOW, PIPE, 3 IN., 90 DEG. LONG RAD., CARBON STEEL, WPB, EXTRA HEAVY, FOR WELDING


description:
END, ROD MARINE, 2-1/4 IN. L X 1-1/4 IN. W, 1/2 IN. SAE, F/GOVERNOR LINKAGE ON MAIN ENGINES ON OLD MARINE FERRIES


description:
END, ROD MARINE, 2-1/4 IN. L X 3/4 IN. W, 3/8 IN. SAE, F/GOVERNOR LINKAGE ON MAIN ENGINES ON OLD MARINE FERRIES


description:
FLANGE, BEARING, 5-3/4 IN. SQUARE, 4 BOLT HOLES, 1-3/4 IN. SHAFT SIZE


description:
FLANGE, BRASS, 2 IN. 150 LB. THREAD, 6 IN. FLAT FALED, 4-HOLE


description:
FLANGE, COUPLING, 1 IN. SHAFT, CAST IRON, FOR SPACE HUB ON RAW WATER PUMP DRIVE


description:
FLANGE, COUPLING, 4-1/2 IN. OD X 1-5/8 IN. ID X 3/4 IN. THICK, TYPE 7, F/LUBE OIL PUMPS ON ALL MARINE FERRIES


description:
FLANGE, PIPE, CARBON STEEL, 2 IN., 150 LB., 6 IN. DIA., 3/4 IN. THICK, 4-HOLE, 2-1/2 IN. HUB LENGTH, FOR WELDING NECK


description:
FLANGE, PIPE, CARBON STEEL, 2-1/2 IN., 150 LB., 7 IN. DIA., 7/8 IN. THICK, 4 HOLE, 2-3/4 IN. HUB LENGTH, FOR WELDING NECK


description:
FLANGE, PIPE, CARBON STEEL, 3 IN., 150 LB., 7-1/2 IN. DIA., 7/8 IN. THICK, 4 HOLE, 2-3/4 IN. HUB LENGTH, FOR WELDING NECK


description:
GASKET, HOUSING, 4-5/8 IN. L X 2-7/8 IN. W X 1/16 IN. T, GARLOX PAPER


description:
GASKET, OIL PAN, OD 32 IN. L X 13 IN. W X 1/16 IN. THICK, ID, 30 IN. L X 11 IN. W X 1/16 IN. THICK, GARLOX PAPER


description:
GASKET, VALVE BODY, 3-1/4 IN. L X 1-1/2 IN. W X 1/16 IN. THICK, GARLOX PAPER


description:
GAUGE, OIL PRESURE, 0-100 PSI, 2 IN. DIAL X 2-1/2 IN. DEEP, STEEL/GLASS


description:
GLASS, SIGHT, 3-1/2 IN. L X 1-3/4 IN. W X 1/8 IN. THICK, FOR MARINE BOILER, WAY-WOLF NO. M1283 OR EQUAL


description:
GUIDE, STEM, W/FLANGED BUSHING FOR INTAKE VALVE ON COOPER MODEL JS6T ENGINE, COOPER NO. JS124F NO. 1 OR EQUAL


description:
HANDLE, RING, STAINLESS STEEL, W/PIN, FOR 1 IN. CAM LOK FITTING, HANDLE: 2 IN. L X 5/16 IN. W, PIN: 1 IN. L X 3/16 IN. D, OVERALL: 2 IN. L X 3/8 IN. W, FOR FUEL AND WATER MARINE CONNECTIONS ABOARD FERRIES


description:
HANDLE, RING, STAINLESS STEEL, W/PIN, FOR 2-1/2 IN. FITTING, HANDLE 3 IN. L X 5/8 IN. W; PIN, 1-1/4 IN. L X 1/4 IN. DIA., RING, 1-1/2 IN.O.D. X 1-1/4 IN.I.D., 3 PC/SET, BRASS AND STEEL, FOR CAM-LOCK FITTINGS ON WATER AND SEWER CONNECTIONS


description:
HUB, SPACER, 2-3/4 IN. OD X 1-1/8 IN. ID X 1/4 IN. KEYWAY X 1-7/16 IN. THICK, TYPE 7, STEEL, F/MARINE PUMPS


description:
HUB, SPACER, 2-3/4 IN. OD X 1-5/8 IN. ID X 3/8 IN KEYWAY X 1-7/16 IN. THICK, TYPE 7, STEEL, F/MARINE PUMPS


description:
HUB, SPACER, FOR TAPERED GRID COUPLING, 1-1/8 IN. BORE X 1/4 IN. KEYWAY, STEEL, FALK NO. 5SC-H OR EQUAL


description:
LEVEL, SWITCHGATE, 9-1/4 IN. T X 3-1/4 IN. W X 3 IN. D, STEEL AND GLASS, F/LUBE OIL LEVEL SENSOR ON SHIP SERVICE GENERATOR


description:
LINE, CONNECTION, 1-7/8 IN. L. X 3/4 IN. D., BRASS, F/AIR STARTING VALVE ON MAIN MARINE ENGINES (JS6T DIESEL)


description:
LOCKNUT, CONNECTING ROD, 1/2 IN. - NF, STD. 2 PIECE UNIT


description:
NUT, CASTLE, FOR COOPER MODEL JS6T ENGINE, COOPER NO. CSA-308-1-056 OR EQUAL


description:
NUT, HEX, 3/8 IN. NC, COOPER NO. CSA-88-1-024 OR EQUAL


description:
NUT, PINION, STEEL, FITS 3/4 IN. SHAFT, 1-3/8 IN. O.D. FOR GOVERNOR ON COOPER  JS6T ENGINE


description:
PLUG, BRASS, 1/2 IN. NPT, FOR ZINC ANODE


description:
PLUG, BRASS, 3/4 IN. NPT, FOR ZINC ANODE


description:
PLUG, DECK, 1-1/2 IN., BRASS SOUNDING PLUG W/O BODY


description:
PLUG, DECK, 2 IN., BRASS SOUNDING PLUG W/O BODY


description:
PLUG, DECK, 1-1/2 IN., BUTTWELD W/S.S. BODY AND BRASS PLUG


description:
PLUG, DECK, 2 IN., BUTTWELD W/S.S. BODY AND BRASS PLUG


description:
PLUG, DUST, 1 IN., TYPE DP, ALUMINUM CAM-LOK FITTINGS


description:
PLUG, DUST, 2-1/2 IN., TYPE DP, ALUMINUM, "CAM-LOCK" FITTINGS


description:
REDUCER, HOSE, BRASS, PIN LUG, 2-1/2 FT. F-NST X 2 IN. M-NPT, BRIGGS WEAVER NO.369P OR EQUAL


description:
REGULATOR, AIR, 6 IN. X 3-1/2 IN. WIDE, W/ 1/2 IN. INLET AND OUTLET, CAST IRON, FOR AIR CONTROL THROTTLE, VOITH NO. 1Z885B OR EQUAL


description:
REGULATOR, PRESSURE, SET AT 50 PSI, OIL, 4-1/2 IN. T X 3-1/4 IN. W X 2 IN. D, CAST IRON


description:
RIVET, COUNTERSUNK, 1/8 IN. X 9/16 IN., FOR HOOK CLAMP TO COVER/RETAINER, DET. NO. 9402383 OR EQUAL


description:
SCREW, SET, ALLEN, 3/8 IN. X 1-1/2 IN., FOR INJECTOR CAMSHAFT DRIVEN GEAR ON DIESEL ENGINE, COOPER NO. CSA77024014 OR EQUAL


description:
SEAL KIT, COUPLING, CONTAINS TWO 3 IN. VEGETABLE PAPER GASKETS AND TWO 3 IN. RUBBER SEALS, FALK NO. 1050T10 OR EQUAL


description:
SENSOR, HEAT, MARINE, 72 DEGREE PRESET, 3 IN. L X I/4 IN. DIAMETER


description:
SLEEVE, COUPLING, NEOPRENE, 2-1/4 IN. I.D., 3-3/4 IN. O.D.


description:
SLEEVE, COUPLING, NEOPRENE, 2-1/2 IN. I.D., 4-3/8 IN. O.D.


description:
VALVE, RELIEF, 1-1/2 IN. NPT, SET AT 165 LBS, 11 IN. T X 4 IN. W X 4-1/2 IN. D, BRONZE, F/AIR SYSTEM ON MARINE FERRY, KUNKLE OR EQUAL


description:
VALVE, RELIEF, 100 PSI, 4-1/2 IN. T X 3-1/4 IN. W X 2 IN. D, CAST IRON


description:
WASHER, BACKUP, ALUMINUM, 7/8 IN. O.D. X 11/16 IN. I.D.


description:
WASHER, COPPER, ROUND, 7/16 IN., FOR EMD MODEL 12-645-E8 ENGINE


description:
WASHER, STEEL, ROUND, 7/16 IN., FOR EMD MODEL 12-645-E8 ENGINE


description:
WASHER, THRUST, ROUND, 7 IN., FOR PISTON CARRIER ON EMD MODEL 12-645-E8 ENGINE


description:
BRUSH, CARBON, 1 IN. X 7/16 IN. X 5/16 IN. THICK, W/ 1-1/2 IN. SPRING ON END, FOR WATER PUMP


description:
BRUSH, CARBON, 1 IN. X 1-1/2 IN. X 3-1/4 IN., GR.6677, STYLE 2QP3, SHUNT 6 IN. NO. 5, LUG = HQD-2, BEV TOP = 20, BEV BOTTOM = 25, POSITIONS 1-3-7-98, HELWIG NO. 10101532778301 OR EQUAL


description:
COVER PLATE, FUEL INJECTOR, COOPER NO. GN-14-9KK OR EQUAL


description:
GLASS, SIGHT, COOPER NO. LS-14-D OR EQUAL


description:
GOVERNOR, OVERSPEED, 6-1/4 IN. L X 3-3/4 IN. W X 1 IN. T, CAST IRON AND STEEL


description:
HANDLE, RING, STAINLESS STEEL, W/PIN, FOR 2 IN. CAM-LOK FITTINGS


description:
HANDLE, RING, STAINLESS STEEL, W/PIN, FOR 4 IN. CAM-LOK FITTINGS


description:
HOOK, BOAT, W/10 FT. ALUMINUM HANDLE, FOR LIFEBOATS


description:
KIT, REPAIR, HYDRAULIC GATE, CONSITS OF 6 PIECES, 2 LARGE O-RINGS, 3-1/2 IN. OD X 3-1/4 IN. ID X 1/8 IN. T, 2 MEDIUM O-RINGS, 7/8 IN. OD X 12/16 IN. ID X 1/16 IN. T, 1 SMALL O-RING, 7/16 IN. OD X 5/16 IN. ID X 1/16 IN. T, AND 1 SEAL, 1-3/8 IN. OD X 3/4 IN. ID X 1/4 IN. T, RUBBER/STEEL


description:
LEVER, ROD, 6-3/8 IN. L X 3 IN. T X 1-1/4 IN. W, CAST IRON


description:
REPAIR KIT, COMPRESSOR, 13 PC., NEOPRENE RUBBER, QUINCY NO. 110774 OR EQUAL


description:
SEALANT, HYDRAULIC, 1.69 FL OZ (50ML) BOTTLE, LIQUID, FOR SEALING HYD. FITTINGS TO HYD. HOSES, LOCTITE NO. 81802 OR EQUAL


description:
SHAFT, MOTOR, 3/4 IN. OD, TAPERING TO 3/16 IN. OD, 2-3/4 IN. OL, STEEL, F/MOTOR ON MODEL UG8 GOVERNOR ON SHIP SERVICE GENERATOR


description:
SHIM, SOLID, STJ, HOUSING, COOPER NO. JS-76-2E OR EQUAL


description:
SPACER, BODY, INJECTOR, COOPER NO. 3-GN-14-5 OR EQUAL


description:
FLAX, 3/4 IN. SQUARE, IMPREGNATED W/TEFLON


description:
GLAND, 134CY, FOR LOW PRESSURE SAFETY GATE CYL.


description:
GLAND, FOR GOULD 3196T WATER PUMP, GOULD NO. 073-716-1203 OR EQUAL


description:
PARTS AND COMPONENTS, STEERING UNIT  (ON MARINE FERRIES)


description:
BOARD, CIRCUIT, "AMPLIFIER" CARD, 3-1/2 IN. W X 7 IN. L X 1 IN. T, BAKELITE & STEEL NO. 13906001 OR EQUAL


description:
BOARD, CIRCUIT, "SYNCHRO" CARD, 3-1/2 IN. W X 7 IN. L X 1 IN. T, BAKELITE & STEEL NO. 13906003 OR EQUAL


description:
FILTER, HYDRAULIC, 6-5/8 IN. L X 2-1/8 IN. D, STEEL AND PAPER, GERMAN VOITH NO. 1410048201 OR EQUAL


description:
SCREW, ALLEN, 120 MM L, SIZE #5, STEEL, GERMAN VOITH OR EQUAL


description:
VALVE, CHECK, 1-3/4 IN. W X 9 IN. L X 1-3/4 IN. D, STEEL, GERMAN VOITH NO. 26421937 OR EQUAL


description:
PRESSURE, 2 IN., CAST ALUMINUM, 10 IN. T X 5-1/2 IN. W X 6 IN. L, W/2 IN. SPT INLET AND OUTLET


description:
DEGREASER/CLEANER, BILGE, WATER BASE, HEAVY DUTY, NO PETROLEUM SOLVENTS


description:
LUBRICANT, AEROSOL, 13 OZ/CAN, 368 GRAMS, W/TEFLON, FOR PREVENTING RUST AND CORROSION ON MARINE PARTS, J&B IND. NO. 119461GA OR EQUAL


description:
MAGNETIC, 3-1/2 IN. L X 1-3/4 IN. W X 2-1/4 IN. T, BRASS/PLASTIC/BAKELITE


description:
MODULE, LIQUID LEVEL, 3-1/2 IN. L, MAX. TEMP. 300 DEG. F, 149 DEG. C, SPST,20 VA, LATCHING REED


description:
PRESSURE, 10# DECREASING, NORMALLY CLOSED, PLASTIC, FOR SHIP SERVICE GENERATOR, DETROIT NO. 8923909 OR EQUAL


description:
PRESSURE, EXTENDED DUTY, PLASTIC, FOR LUBE ALARM ON JS6T DIESEL ENGINE, S.W. NO. 7605215MD OR EQUAL


description:
PRESSURE, 3000 P.S.I., 125/250/480 VAC @ 15 AMPS, 125 VDC @ 0.4 AMPS, OVERALL  6-1/2 IN. X 3-5/8 IN., W/METAL COVER


description:
SELECTOR, 3 POSITION, 10 AMP, 125 VAC, CYLINDRICAL, 6-1/2 IN. L X 3-3/4 IN. W, BAKELITE AND STEEL COMPOSITION (FOR STEERING SYSTEMS ON FERRIES)


description:
RANGES TO 250 DEGREES F, STEM 9 IN., DIAL 3 IN., FOR VOITH PROPULSION SYSTEMS ON MARINE FERRY, ASHCRAFT NO. 30E160E090 OR EQUAL


description:
RANGES TO 250 DEGREES F, STEM 20 IN., DIAL 3 IN., FOR VOITH PROPULSION SYSTEMS ON MARINE FERRY, ASHCRAFT NO. 30E160E200090 OR EQUAL


description:
3.44 IN. L X .98 IN. W, STEEL AND NEOPRENE, W/REVERSE FREE FLOW CHECK, F/HYDRAULIC SYSTEM ON BARRIER GATES


description:
PILOT, 6-1/2 IN. L X 3-1/8 IN. W X 2 IN. D, STEEL, 1 X 20 BAR, J.M. VOITH NO. VPB25HK200072AO OR EQUAL


description:
PILOT, 7-3/8 IN. L X 4 IN. W X 2 IN. D, STEEL, 1 X 2, 5 BAR, J.M. VOITH NO. VPB32HK030072AO OR EQUAL


description:
PILOT, 8 IN. L X 4-3/4 IN. W X 2 IN. D, STEEL, 1 X 1, 5 BAR, J.M. VOITH NO. VPB40HK010072AO OR EQUAL


description:
1/2 IN., 250 P.S.I., 1/2 IN. NPT FITTINGS, 6-1/2 IN. L X 2-3/4 IN. W X 2-1/4 IN. D, BRONZE AND STEEL


description:
1-1/2 IN., BRASS, 150 P.S.I., 119 GPM CAPACITY, 9 IN. X 4 IN., BOTTOM MALE AND FEMALE END BOTH MACHINE THREAD


description:
3.62 IN. L X .98 IN. W, STEEL AND NEOPRENE, 1000 P.S.I., F/HYDRAULIC SYSTEM ON BARRIER GATES


description:
WINDSHIELD WIPERS AND PARTS, BOAT (KEARFOOT OR EQUAL)


description:
CONTROLLER, WINDSHIELD WIPER, 115 VOLT AC/DC, 6-1/2 IN. H X 4-1/2 IN. W X 3-1/2 IN. L STEEL BOX, ADJUSTS SPEED OF WIPER ARMS ON MODEL KS1385-08, NO. KS9276


description:
HOUSING, MOTOR, WINDSHIELD WIPER, 5-3/4 IN. W X 9-3/4 IN. H X 2 IN. L, ALUMINUM, FOR MODEL KS1385-08


description:
KEY, WINDSHIELD WIPER, 1/8 IN. X 1/8 IN. X 3/4 IN. LONG, STEEL SHAFT POSITIONER, FOR WIPER ARM SHAFT ON MODEL KS1385-08


description:
SHAFT, WIPER ARM, 5-1/2 IN. L X 1/2 IN. THICK, BRASS, FOR MODEL KS1385-08, NO. 15A


description:
BELT TYPE, FOR CHILD UNDER 90 LBS., ORANGE OXFORD NYLON FABRIC, USCG TYPE 1, STRAPS AND BINDINGS POLYPROPYLENE, D-RINGS, SNAPS, STAINLESS STEEL


description:
BELT TYPE, FOR ADULT OVER 90 LBS., ORANGE OXFORD NYLON FABRIC, USCG TYPE 1,BELTS, STRAPS & BINDINGS POLYPROPYLENE, D-RINGS & SNAPS STAINLESS STEEL, SAFEGUARD MODEL 199 OR EQUAL


description:
14 VOLT, 2 AMP, WESTINGHOUSE NO. FR-1789 OR EQUAL


description:
PARTS AND ACCESSORIES, BEACON AND SIGNAL LIGHT


description:
SOCKET, SEARCH LIGHT, 1000 WATT, 250 VOLT


description:
90 DEGREE. GREEN, PLASTIC, FOR PERKO LIGHT NO. 1160


description:
90 DEGREE, RED, PLASTIC, FOR PERKO LIGHT NO. 1160


description:
180 DEGREE, GREEN, PLASTIC, FOR PERKO LIGHT NO. 1160


description:
360 DEGREE, GREEN, PLASTIC, FOR PERKO LIGHT NO. 1160


description:
360 DEGREE, RED, PLASTIC, FOR PERKO LIGHT NO. 1


description:
6 VOLT, 180 DEG., RED PLASTIC LENS, SOLAR POWERED, AUTOMATIC POWER NO. 851030 OR EQUAL


description:
6.2 VOLT, 0.25 AMP, HIGH INTENSITY CLEAR BULB, STYLE CB, FOR AUTOMATIC POWER LIGHT MODEL FA249713, TIDELAND NO. 185102100 OR EQUAL


description:
12 VOLT, .77 AMP, HI-INTENSITY, CLEAR, STYLE C8


description:
120 VOLT, 180 DEG., RED FRESNAL LENS, PLASTIC BASE, GMU LANTERN W/TF3AC LAMP CHANGER ASSY., TIDELAND SIGNAL CORP. NO. ML155-180 OR EQUAL


description:
600 VOLT, 100 WATT, 180 DEG., RED FRESNAL, HEAVY CAST ALUMINUM, W/DUAL LAMP AND TRANSFER RELAY


description:
600 VOLT, 100 WATT, 360 DEG., GREEN FRESNAL, HEAVY CAST ALUMINUM, W/DUAL LAMP AND TRANSFER RELAY


description:
600 VOLT, 150 WATT, 360 DEG., GREEN LENS


description:
PARTS AND ACCESSORIES, NAVIGATIONAL LIGHT


description:
BULB, NAVIGATION, 120 VOLT, 24 CD RANGE, BAY 15, 25 X 70, 3/4 IN. BASE, OFFSET PRONGS, CLEAR TUBE


description:
CHANGER ASSY. LAMP, 120 VAC INPUT, 12 VOLT OUTPUT, 50/60 HZ, INCLUDES TRANSFORMER, MAX. LOAD: 1 AMP, FOUR 3.05 AMP CLEAR PLUG-IN TYPE BULBS AND ROTATING HEAD ASSY., TIDELAND NO. 751102702 OR EQUAL


description:
FLANGE, COMPANION, 6 IN., BRASS, 4 HOLES, THREADED FOR 2 IN. NPT


description:
FLANGE, COMPANION, 7 IN., BRASS, 3 HOLES, THREADED FOR 2 IN. NPT


description:
LAMP, 40 WATT, 115-125 VOLT, TUBULAR, MARINE


description:
LENS, GREEN 360 DEGREE, INVERTED MT., PLASTIC, FOR TIDELAND LIGHT MODEL ML-155


description:
LENS, RED, 360 DEGREE, INVERTED MT., PLASTIC, FOR TIDELAND LIGHT MODEL ML-155


description:
PIVOT ASSY., GALV., 2-PIECES: MOUNTING BRACKET 1/2 IN. THICK X 6-3/4 IN. TRI-BASE PLATE 1 IN.I.D. X 4 IN. SHAFT, AND HANGER FOR LIGHT 7 IN. H W/ 1 IN. D BRASS BUSHING, 360 DEG. RADIUS, FEDERAL NO. 7214135/7014485 OR EQUAL


description:
SUNSWITCH, 240 VAC - SINGLE PHASE INPUT VOLTAGE, 120 VAC - SINGLE PHASE OUTPUT VOLTAGE, 2.5 AMP OUTPUT CURRENT, 50-60 HZ. FREG. RANGE, TIDELAND SIGNAL CORP. NO. 530129900 OR EQUAL


description:
Motor and Engine Parts and Accessories (Miscellaneous), Marine


description:
DRIVE SHAFT, 1-1/4 IN. I.D. X 1-1/2 IN. L, BRONZE, FOR WOODWARD GOVERNOR MODEL UG-8 ON COOPER JS6T ENGINE


description:
FLANGED, OVERSPEED FOR GOVERNOR AUXILIARY DRIVE ON COOPER MODEL JS6T ENGINE, COOPER NO. JS354G OR EQUAL


description:
FLOATING, 1-1/16 IN. L X 1-3/16 IN. DIA., STAINLESS STEEL, FOR EMD MODEL 12-645-E6 AND E8 DIESEL ENGINES, DETROIT NO. 8135971 OR EQUAL


description:
OVERSPEED GOVERNOR, COOPER NO. P32-A-226S OR EQUAL


description:
ROCKER ARM, 1-7/8 IN. L X 2-1/4 IN. DIA. X 1/16 IN. THICK, STAINLESS  STEEL, FOR EMD MODEL 12-645-E6 AND E8 DIESEL ENGINES, DETROIT NO. 9571921 OR EQUAL


description:
O-RING, COMPRESSOR CAP, LEROI NO. H125277 OR EQUAL


description:
O-RING, COMPRESSOR PLUNGER, LEROI NO. H125276 OR EQUAL


description:
O-RING, COMPRESSOR PLUNGER, LEROI NO. H125286 OR EQUAL


description:
REPAIR KIT, OIL PUMP, 7 PIECE: 3 O-RINGS, DRIVESHAFT BEARING KEY, RETAINING RING AND PUMP GEROTOR, FOR REBUILDING OIL PUMP ON MODEL 350 QUICY AIR COMPRESSOR, QUINCY NO. 160079 OR EQUAL


description:
REPAIR KIT, AIR COMPRESSOR, 18 PARTS, 31 PIECES, QUINCY NO. 10823350 OR EQUAL


description:
VALVE, CONTROL ASSY., LEROI NO. A141260 OR EQUAL


description:
VALVE, DISCHARGE ASSY., LEROI NO. IAH151251 OR EQUAL


description:
VALVE, DISCHARGE ASSY., LEROI NO. IAH151253 OR EQUAL


description:
VALVE, PRESSURE RELIEF, 3/4 IN., BRONZE, 165 P.S.I., 8 IN. H X 3 IN. W, W/ 3/4 IN. M&F FITTING, FOR AIR WHISTLE SYSTEM, KUNKLE NO. 6010ED OR EQUAL


description:
VALVE, PRESSURE RELIEF, 1 IN., BRASS, 260 P.S.I., 9 IN. H X 3-1/2 IN. W, W/ 1-1/4 IN. NPT FEMALE OUTLET AND 1 IN. NPT MALE INLET, KUNKLE NO. 6010FE OR EQUAL


description:
VALVE, PRESSURE RELIEF, 1-1/4 IN., BRONZE, 225 P.S.I., 10 IN. H X 4 IN. W, W/ 1-1/4 IN. M&F FITTING,   FOR AIR STARTING SYSTEM, KUNKLE NO. 6010GF OR EQUAL


description:
VALVE, SUCTION ASSY., LEROI NO. AH1512511 OR EQUAL


description:
VALVE, SUCTION ASSY., LEROI NO. AH1512531 OR EQUAL


description:
VALVE, SUCTION ASSY., LEROI NO. IA151565 OR EQUAL


description:
AIR FILTER, 19-3/8 IN. X 19-3/8 IN. X 2 IN., AIR INTAKE ON TURBO


description:
AIR FILTER, 20 IN. X 45 IN. X 2 IN., POLYESTER, FOR TURBO CHARGER


description:
AIR FILTER, W/FIBERGLASS ELEMENT, GMC NO. 9522063 OR EQUAL


description:
BOWL, FUEL FILTER, METAL, 4-3/8 IN. I.D., RANCOR NO. RK-11734 OR EQUAL


description:
FUEL FILTER, 4-3/8 IN. DIAMETER X 9-3/4 IN. L, PAPER, 10 MICRON, W/O-RING


description:
HANDLE KIT, FILTER BOWL, T-STYLE, INCLS. 3-1/4 IN. LONG HANDLE, W/1/2 IN. BRASS, THREADED, AND 3 GASKETS, RACOR NO. RK11888 OR EQUAL


description:
HYDRAULIC, 2-1/2 IN. L X 1 IN. W, STEEL, J.M. VOITH NO. HF2 OR EQUAL


description:
LID, FILTER BOWL, 5-1/2 IN. DIA., STEEL, RACOR NO. RK11005B OR EQUAL


description:
OIL FILTER, 40 MICRON ELEMENT, FOR WESTERN REDUCTION GEAR


description:
REGULATOR FILTER, 3/8 IN., F/AIRLINE, 6-1/2 IN. X 3 IN. W X 3 IN. L, STEEL AND GLASS


description:
TUBE KIT, FUEL FILTER, 4 PARTS: TUBE, 11 IN. L X 3/4 IN.O.D.; LID GASKET, 5 IN.O.D. X 4-3/4 IN.I.D. X 1/16 IN. H; T-HANDLE GASKET, 3/4 IN.O.D. X 5/8 IN.I.D. X 1/8 IN. H; T-HANDLE O-RINGS, 5/8 IN.O.D. X 1/2 IN.I.D. X 1/16 IN. H, RACOR NO. RK11008 OR EQUAL


description:
AIR BOX, FOR DETROIT 8-71 ENGINE, DETROIT NO. 8923792 OR EQUAL


description:
AIR BOX, FOR DETROIT 8-71 ENGINE, DETROIT NO. 8923791 OR EQUAL


description:
BLOWER, FOR DETROIT 8-71 ENGINE, DETROIT NO. 5149644 OR EQUAL


description:
BONNET, FABRIC, HEAT EXCHANGER, ROSS NO. 329980090510 OR EQUAL


description:
BONNET, FABRIC, HEAT EXCHANGER, ROSS NO. 329880090610 OR EQUAL


description:
CAM-LOCK FITTINGS (B,C AND D), NEOPRENE, 2 IN.


description:
CAMLOCK, RUBBER, 3-1/4 IN.O.D. X 2-3/8 IN.I.D. X 1/4 IN. THICK, FOR 2 IN. DOVER QUICK DISCONNECT CHECK VALVE ON FUEL LINES


description:
CAMSHAFT, FRONT END BEARING, STJ, FOR SHIP SERVICE GENERATOR, DETROIT NO. 5117-243 OR EQUAL


description:
CAP, COMPRESSOR, LEROI NO. H1615312 OR EQUAL


description:
COVER, END, 48 IN. L X 28 IN. WIDE O.D., 1/32 IN. THICK, 44 IN. L X 23 IN. WIDE I.D., W/SIXTEEN 1 IN. HOLES, VEGETABLE PAPER, COOPER-BESSEMER NO. JS652B OR EQUAL


description:
COVER, ENGINE HOUSING, COOPER NO. GN-19-1J OR EQUAL


description:
COVER, HEAD, 19-1/4 IN. 0.W. X 27-1/4 IN O.L. X 1/16 IN. THICK, CORK AND BUNA-N MATERIAL


description:
COVER, HOUSING, CORK, FOR EMD MODEL 12-645-E8 ENGINE, DETROIT NO. 8173851  OR  EQUAL


description:
COVER, HOUSING, DRIVE, FIBER, 1/32 IN. THICK, COOPER NO. JS35P OR EQUAL


description:
COVER, LUBE OIL STRAINER, GMC NO. 8085253 OR EQUAL


description:
COVER, LUBE OIL FILTER, FOR EMD ENGINES, DETROIT NO. 8268756 OR EQUAL


description:
COVER, RUBBER, HANDHOLD TO CRANKCASE, FOR EMD MODEL 12-645-E8 ENGINE, DETROIT  NO. 8291349 OR EQUAL


description:
COVER, VALVE, RUBBER, FOR GMC 8-71 ENGINE, SHIP SERVICE GENERATOR, GMC NO. 510-4081 OR EQUAL


description:
CRANKCASE, INNER, 1 IN. W, FOR FRAME TO CRANKCASE ON EMD MODEL 12-645-E8 ENGINE DETROIT NO. 9570843 OR EQUAL


description:
CRANKCASE, OUTER, 1 IN. W, FOR FRAME TO CRANKCASE ON EMD MODEL 12-645-E8 ENGINE DETROIT NO. 9570608 OR EQUAL - 2/SET


description:
CYLINDER WITH DOUBLE GROOVE OUTLET AND HEAD GASKET, FOR EMD MODEL 12-645-E8 ENGINE, DETROIT NO. 8479836 OR EQUAL


description:
ENGINE, DIESEL, 4-1/2 IN. L X 3-1/2 IN. W X 1/16 IN. THICK, GARLOCK MATERIAL, COOPER BESSEMER NO. EN319P OR EQUAL


description:
ENGINE, DIESEL, 10-1/4 IN.O.D. X 8-1/2 IN.I.D., GARLOCK PAPER, FOR DETROIT DIESEL ENGINE MODEL 12-645 E6/E8 EMD, DETROIT NO. 8209776 OR EQUAL


description:
ENGINE, DIESEL, 10-1/2 IN. L X 8-1/2 IN. W X 1/8 IN. THICK, VEGETABLE PAPER, COOPER BESSEMER NO. JS910B OR EQUAL


description:
ENGINE, DIESEL, 2-1/2 IN. D X 1/16 IN. THICK, W/THREE 3/8 IN. HOLES, GARLOY PAPER, FOR KNEE DRIVE ASSY. ON COOPER BESSEMER JS6T ENGINE, COOPER BESSEMER NO. JS35AE OR EQUAL


description:
ENGINE, DIESEL, 16-1/2 IN. L X 8 IN. W X 1/16 IN. THICK, METAL CLAD, STEEL AND GARLOY PAPER, FOR TURBO PLATE ADAPTER ON COOPER BESSEMER NO. JS6T DIESEL ENGINE, COOPER BESSEMER NO. JS692C OR EQUAL


description:
ENGINE, DIESEL, MODEL JS6T, COOPER NO. JS-18-1N OR EQUAL


description:
EXHAUST, 21-1/2 IN. L X 10-1/2 IN. WIDE O.D., 18 IN. L X 7 IN. WIDE I.D., 1/32 IN. THICK, VEGETABLE PAPER W/SIXTEEN 1/2 IN. HOLES, COOPER-BESSEMER NO. JS692R OR EQUAL


description:
FLAT, RECTANGULAR, FOR COOPER MODEL JS6T ENGINE, COOPER NO. JT30F OR EQUAL


description:
FLAT, RECTANGULAR, FOR COOPER MODEL JS6T ENGINE, COOPER NO. JS393A#1 OR EQUAL


description:
FLAT, RECTANGULAR, FOR COOPER MODEL JS6T ENGINE, COOPER NO. JS9D OR EQUAL


description:
FLAT, RECTANGULAR, FOR COOPER MODEL JS6T ENGINE, COOPER NO. GN149NN OR EQUAL


description:
FLAT, RECTANGULAR, FOR MODEL JS6T ENGINE, COOPER NO. GN131C#SF16 OR EQUAL


description:
FLAT, FOR AIR START PILOT VALVE BODY, COOPER NO. EN19R OR EQUAL


description:
FLAT, ROUND, FOR COOPER MODEL JS6T ENGINE, COOPER NO. JS2810C OR EQUAL


description:
FLAT, ROUND, FOR COOPER MODEL JS6T ENGINE, COOPER NO. 8053EP#SF16 OR EQUAL


description:
FLAT, SCAVENGING, 6 IN.O.D. X 5-1/4 IN.I.D. X 1/16 IN. THICK, VEGETABLE PAPER, FOR OIL SHUT DOWN AND OIL PRESSURE ALARM ON DETROIT MODEL 12-645-E8 DIESEL ENGINE, DETROIT NO. 40024940 OR EQUAL


description:
GASKET KIT, ENGINE, CONTAINS 7 ASSORTED VEGETABLE PAPER GASKETS, FOR DETROIT DIESEL ENGINE MODEL 12-645 E6/E8 EMD, DETROIT NO. 9580724 OR EQUAL


description:
GASKET KIT, PUMP, FRESH WATER, CONSISTING OF BUSHING, 2 GASKETS, 2 SEALS, 1 SEAL RETAINER, 6 BOLTS, DETROIT NO. 9580758 OR EQUAL


description:
GENERATOR, 3-1/4 IN. L XZ 1-1/4 IN. W X 1/16 IN. THICK, GARLOX PAPER, DETROIT NO. 23506469 OR EQUAL


description:
HEAD, FOR CYL. HEAD ON DETROIT 8-71 ENGINE, DETROIT NO. 5196381 OR EQUAL


description:
HEAD, FOR NOPAK BLANK END CYLINDER HEAD, MOTION IND. NO. 749NES4A OR EQUAL


description:
HEAD, CYLINDER, CLEAN-OUT PLATE, COOPER NO. JS-11-1J OR EQUAL


description:
HEAT EXCHANGER KIT, INCLS. 17 GASKETS OF PAPER, METAL AND RUBBER,  DETROIT NO. 5192637 OR EQUAL


description:
HOUSING, ENGINE, GARLOX PAPER, 12 IN. L X 9-3/4 IN. W X 1/16 IN. THICK, DETROIT NO. 8312916 OR EQUAL


description:
HOUSING, 12 IN. L X 10 IN. W X 1/32 IN. THICK, VEGETABLE PAPER W/THREE 3/4 IN. HOLES, COOPER-BESSEMER NO. JS357G OR EQUAL


description:
HOUSING, GOVERNOR DRIVE COVER, SHIP SERVICE GENERATOR, DETROIT NO. 8927412 OR  EQUAL


description:
HOUSING, GOVERNOR DRIVE, STJ, SHIP SERVICE GENERATOR, DETROIT NO. 51501932 OR EQUAL


description:
HOUSING, OVERSPEED TRIP, FOR EMD MODEL 12-645-E8 ENGINE, KIT CONTAINS ASSORTMENT OF GASKET MATERIALS


description:
HOUSING, VEGETABLE FIBER (PAPER), 12-1/2 IN. L X 9-3/4 IN. W FOR THERMOSTATIC VALVE ON ELETRO-MOTIVE DIESEL ENGINE, AMT NO. 1123 OR EQUAL


description:
MANIFOLD, EXHAUST FLANGE, PAPER, FOR EMD MODEL 12-645-E8 ENGINE, DETROIT NO. 9570695 OR EQUAL


description:
MANIFOLD, FUEL, FOR EMD ENGINE MODEL 12-645-E8, DETROIT NO. 40024937 OR EQUAL


description:
MANIFOLD, FUEL, FLANGE, FOR EMD ENGINE MODEL 12-645-E8, DETROIT NO. 9570769 OR EQUAL


description:
MANIFOLD, FUEL, FOR EMD ENGINE MODEL 12-645-E8, DETROIT NO. 9570821 OR EQUAL


description:
MANIFOLD, S/S, TO CRANKCASE FLANGE, FOR EMD MODEL 12-645-E8 ENGINE, DETROIT NO. 9571655 OR EQUAL


description:
PLATE, COVER,FUEL INJECTOR, COOPER NO. GN-14-9KK OR EQUAL


description:
PUMP, CASING, RAW WATER, GOULD NO. 70782295127 OR EQUAL


description:
PUMP, FUEL, 2-1/4 IN. SQUARE, 1-1/2 IN. I.D. HOLE, VEGETABLE PAPER, COOPER-BESSEMER NO. JS189G OR EQUAL


description:
PUMP, PAPER, COVER MOUNTING, DETROIT NO. 8029498 OR EQUAL


description:
PUMP, RAW WATER, PAPER, 4-5/8 IN. I.D., 6-1/4 IN. O.D., DETROIT NO. 5156145  OREQUAL


description:
PUMP, RAW WATER, PAPER, COVER PLATE TO HOUSING, DETROIT NO. 8900000 OR EQUAL


description:
RETAINER, 9 IN.O.D. X 6 IN.I.D., FLAT ROUND VEGETABLE PAPER, INCLS. SIX 5/8 IN. HOLES, FOR MODEL JS6T COOPER-BESSEMER DIESEL ENGINE, NO. JS35X OR EQUAL


description:
SEAL, VALVE, 1 IN. H X 1-3/4 IN. DIA., DETROIT NO. 40017341 OR EQUAL


description:
VALVE, COMPRESSOR, LEROI NO. H161466 OR EQUAL


description:
VALVE, COMPRESSOR, LEROI NO. H161467 OR EQUAL


description:
VALVE, COMPRESSOR, LEROI NO. H1615313 OR EQUAL


description:
VALVE, DIESEL MAIN ENGINE, 9 IN.O.D. X 4 IN.I.D. X 1/16 IN. THICK, W/EIGHT 3/4 IN. HOLES, GARLOX PAPER, DETROIT NO. 9570862 OR EQUAL


description:
VALVE, TEMPERATURE CONTROL, 5-3/8 IN. SQUARE X 1/16 IN. THICK, 2-3/8 IN.I.D. CENTER HOLE W/FOUR 1/2 IN. BOLT HOLES, CORK MATERIAL, AMOT NO. 1100 OR EQUAL


description:
3/16 IN. THICK, VITAN, 5-1/8 IN. O.D. X 4-3/4 IN. I.D., FOR FILTER ELEMENT


description:
7/8 IN. THICK, 15 IN. O.D. X 14-3/8 IN. I.D., SPIRAL WOUND, 304 STAINLESS STEEL, FOR VALVE COVERS


description:
REDUCTION GEAR ON COOLING WATER PUMP ON MARINE FERRIES, 5 H.P., 230/460 VOLT, 3 PHASE, 1740 RPM, SHAFT SIZE 1-1/8 IN., 16 IN. L X 9 IN. H X 12 IN. W, STEEL AND COPPER


description:
VENTILATION FAN, 230/460 VOLT, 15 H.P., 1760 RPM, 19/38 AMPS, CAST STEEL HOUSING


description:
WATER PUMP, 1/2 H.P., 1750 RPM, 4.8 AMPS, 5/8 IN. SHAFT, BALDOR NO. D-1152 OR EQUAL


description:
ADAPTER, THERMOCOUPLE, 2-1/2 IN. H X 1 IN. W X 1 IN. DEEP, STAINLESS STEEL, DETROIT NO. 552000072F OR EQUAL


description:
ADJUSTER ASSY., ENGINE, OVERALL LENGTH 1-1/2 IN., 7/8 IN. O.D., STEEL, FOR 12-645-E8 EMD DIESEL ENGINE


description:
ARM ASSY., EXHAUST VALVE, 8-1/2 IN. L X 3-7/8 IN. W, STEEL, FOR ROCKER EXHAUST VALVE ON  ELECTROMOTIVE 12-645-E8  DIESEL ENGINE


description:
ARM, LATCH CLAMP, STAINLESS STEEL, FOR EMD MODEL 12-645-E8 DIESEL ENGINE, DETROIT NO. 8168864 OR EQUAL


description:
ARM, ROCKER,  8-1/4 IN. L X 4-1/8 IN. W, STEEL, FOR FUEL INJECTOR ON ELECTROMOTIVE 12-645-E8  DIESEL ENGINE


description:
BAFFLE, OIL, STEEL, FOR ELLIOT MODEL BF-34 TURBOCHARGER, FOR JS6T DIESEL ENGINE, ELLIOT-BUCHLI NO. 830310  OR EQUAL


description:
BALL, STEEL, 7/16 IN., FUEL CUTOFF VALVE FOR FUEL INJECTOR BLOCK ON JS6T COOPER-BESSEMER DIESEL ENGINE, COOPER-BESSEMER NO. SF276-7/16 IN. OR EQUAL


description:
BEARING, BALL, CRANKSHAFT, 4 IN. O.D. X 2-1/2 IN. I.D., ENCLOSED, STEEL, HATCH & KIRK NO. NS307 OR EQUAL


description:
BEARING, CUTLESS, 4-1/2 IN. X 5-1/2 IN., MORSE SUCKER OR EQUAL


description:
BEARING, FUEL INJ., FOR COVER PLATE ASSY., COOPER NO. GN-14-9E OR EQUAL


description:
BEARING, FUEL INJ., FOR REGULATOR SHAFT, COOPER NO., GN-14-9R OR EQUAL


description:
BEARING, ROLLER, FOR 2000 H.P. PROPULSION MOTOR, SKF NO. 6236 OR EQUAL


description:
BEARING, ROLLER, WATER PUMP, 2-3/4 IN. O.D., 1-1/4 IN. I.D., GORMAN RUFF NO. GRS-1082 OR EQUAL


description:
BELT, TIMING, 770-XH-200, FOR 25KW ALTERNATOR ON A/C PROPULSION SYSTEM SYNCHRONOUS TYPE, 77.0 PITCH X 2 IN. W X 88 TEETH, IH-SEC 7/8 IN. PITCH


description:
BELT, TIMING, 780-H-100, FOR 3 KW EXCITER ON 50 KW GENERATOR


description:
BELT, TIMING, 840 - XH - 200, FOR 25 KW ALTERNATOR ON AC PROPULSION SYSTEM


description:
BLOCK, FUEL INJECTOR, 9-1/4 IN. L X 3-1/2 IN. W X 6-1/2 IN. H, CAST IRON, COOPER-BESSEMER NO. LS148 OR EQUAL


description:
BLOCK, FUEL, FOR JS6T DIESEL ENGINE, COOPER NO. Z1411A NO. 6 OR EQUAL


description:
BLOCK, VALVE, FUEL INJECTION SYS., COOPER NO. Z-14-1-1 NO. 5 OR EQUAL


description:
BOLT, PIN, FOR ATTACHMENT OF PISTON TO CONNECTING ROD ON DIESEL ENGINES, COOPER NO. JS-4-1G OR EQUAL


description:
BRACKET, CONTROL LEVER, 3/4 IN. PORT SIDE FITTING W/1/8 IN. HOLE, STEEL, 8-5/8 IN. L X 5-1/2 IN. H, W/TWO 1/2 IN. HOLES AT BOTH ENDS OF BOTTOM PLATE, 1-3/4 IN. W X 1/2 IN. THICK, 5 LB. 10 OZ., COOPER NO. JS-3251A OR EQUAL


description:
BUSHING, ENGINE, COOPER NO. JS-76-2F OR EQUAL


description:
BUTTON, INJECTOR, 15/16 IN. DIA., 3/8 IN. DEEP, STAINLESS STEEL, A-13 PAGE, FOR EMD MODEL 12-645-E8 DIESEL ENGINE, DETROIT NO. 8052307 OR EQUAL


description:
CAM, RAW WATER PUMP, 3/4 IN. I.D., 2-1/2 IN. O.D., W/WEAR PLATE, ON G.M.2-71 DIESEL ENGINE, DETROIT NO. 5196695 OR EQUAL


description:
CAP, CAM SHAFT BEARING, COOPER NO. GN-14-9GG OR EQUAL


description:
CAP, ARM SUPPORT, ROCKER ARM SHAFT, 2-1/8 IN. L X 1 IN. H X 1-3/8 IN. W, STAINLESS STEEL, FOR EMD MODEL 12-645-E6 AND E8 DIESEL ENGINES, DETROIT NO. 9090608 OR EQUAL


description:
CARTRIDGE, VALVE, MARINE, BLOCK TYPE, FOR FUEL LINE ON OVERSPEED GOVERNOR, FOR FLUID CONTROL VALVE


description:
CHAIN, TIMING, COOPER NO. 1-08P-014-085 OR EQUAL


description:
CLAMP, EXHAUST MANIFOLD, STAINLESS STEEL, 10-3/8 IN. I.D., DETROIT NO. 8158870 OR EQUAL


description:
CLAMP, HOOK, METAL, FOR DECK COVER FOR EMD MODEL 12-645-E8 DIESEL ENGINE, DETROIT NO. 8208156 OR EQUAL


description:
CLAMP, LATCH, FOR EMD DIESEL ENGINES, DETROIT NO. 8168871 OR EQUAL


description:
COLLAR, THRUST, STEEL, FOR ELLIOT MODEL BF-34 TURBOCHARGER, FOR JS6T DIESEL ENGINE, ELLIOT-BUCHLI NO. 8424421 OR EQUAL


description:
CONNECTION, MODEL JS6T DIESEL ENGINE, COOPER NO. EN-34-10F OR EQUAL


description:
CONNECTION, WATER PUMP, CAST STEEL, 5 IN. I.D. X 12 IN. O.D., COOPER NO. JTB272J#1 OR EQUAL


description:
CONNECTION, PUMP, 2-7/8 IN. L X 1 IN. W, STEEL, FOR FUEL PUMP DISCHARGE, COOPER-BESSEMER NO. EN1845 OR EQUAL


description:
COVER, AIR BOX, FOR GMC 8-71 DIESEL ENGINE, DETROIT NO. 5132458 OR EQUAL


description:
COVER, FUEL INJECTOR, COOPER NO. GN-14-9A OR EQUAL


description:
CRAB, FUEL INJECTOR, 4-1/8 IN. L X 2 IN. W, STEEL, FOR ELECTROMOTIVE 12-645-E8  DIESEL ENGINE


description:
CRANKSHAFT ASSY., ENGINE, 13 IN. L, STEEL, SHAFT SIZE 1 IN., COOPER-BESSEMER NO. 10JS1810 OR EQUAL


description:
CRANKSHAFT, 13 IN. L X 1-1/2 IN. W, STEEL, FOR OIL PUMP ON COOPER-BESSEMER DIESEL ENGINE, COOPER-BESSEMER NO. FV182F OR EQUAL


description:
CROSSHEAD, PUSH ROD, 4-1/4 IN. L X 2 IN. DIA., STEEL, FOR ROCKER SHAFT ASSY. ON COOPER-BESSEMER DIESEL ENGINES, COOPER-BESSEMER NO. JS251G NO. 4 OR EQUAL


description:
ELEMENT, VALVE, 195 DEGREE, 5-3/4 IN. H X 2-1/2 IN. W, BRASS, FOR AMOT VALVE MODEL 4BOCF17001, AMOT NO. 9080820 OR EQUAL


description:
FILTER, AIR, AIR REFINER NO. AIR-4169180F OR EQUAL


description:
FLANGE, FUEL PUMP, 3 IN. L X 1-1/4 IN. H, BRASS, COOPER-BESSEMER NO. JS1890 OR EQUAL


description:
GASKET, COVER, 12-1/4 IN. O.D. X 10 IN. I.D. X 1/16 IN. THICK W/ 7/16 IN. HOLES, VEGETABLE PAPER, COOPER-BESSEMER NO. JTB272L OR EQUAL


description:
GASKET, PUMP, 7/8 IN. O.D. X 1/2 IN. I.D., COPPER, COOPER-BESSEMER NO. SF16#55 OR EQUAL


description:
GASKET, PUMP, 1 IN. O.D. X 3/4 IN. I.D., COPPER, HATCH & KIRK NO. 8085FP  OR EQUAL


description:
GASKET, PUMP, 3 IN. L X 2 IN. W, 1-1/2 IN. I.D. HOLE, FIBER MAT'L., COOPER-BESSEMER NO. FV185C OR EQUAL


description:
GASKET, PUMP, 3 IN. L X 2 O.D., 1-1/2 IN. I.D. HOLE, FIBER MAT'L., COOPER-BESSEMER NO. JS185C OR EQUAL


description:
GASKET, TURBOCHARGER, FLAT, 3-1/4 IN. O.D. X 2-3/8 IN. I.D., VEGETABLE MATTER PAPER, COOPER-BESSEMER NO. ET131K OR EQUAL


description:
GASKET KIT, ASSORTED MATERIAL, FOR OVERSIZED HOUSING ON EMD MODEL 12-645EB ENGINE, DETROIT NO. 9580770 OR EQUAL


description:
GEAR, 4-1/2 IN. O.D. GEAR SIDE, 1-1/4 IN. I.D. HOLE, 1/2 IN. THICK, STEEL, COOPER-BESSEMER NO. JS192F OR EQUAL


description:
GEAR, AIR STARTER, HELICAL, 4-1/2 IN. W X 3-1/2 IN. THICK X 2-1/2 IN.I.D. X 4-1/2 IN. O.D., 2-1/2 IN. KEYWAYS, VERTICAL GEARS W/GROUNDS, COOPER-BESSEMER NO. JS155C OR EQUAL


